Denon POA-3012CI logic modules

[marco0305]

Hi,

I'm still struggling to get the initialisation done!
During the init from the module I have to sent a few commands (ascii) to get the feedback from the amp. It sends the first command for the master power but then I like to request the status of each individual zone.
This is what I've done.

#Query
5012|0|"EI"|""PW00?""|"1"|1|1|0|0
5012|0|"EI and OC[1]"|""ST02?""|"1"|1|2|0|0
5012|0|"EI and OC[2]"|""ST04?""|"1"|1|3|0|0
5012|0|"EI and OC[3]"|""ST06?""|"1"|1|4|0|0
5012|0|"EI and OC[4]"|""ST08?""|"1"|1|5|0|0
5012|0|"EI and OC[5]"|""ST10?""|"1"|1|6|0|0
5012|0|"EI and OC[6]"|""ST12?""|""|1|0|0|0

Obviously this doesn't work.
Can somebody offer any help?
The commands have to be separated by 200ms.

Marco

[tbi]

a timer in logic

Hi marco,

see here is a Timer used:

http://www.dacom-homeautomation.de/c...ndenImpuls.hsl

and here more infos:

DaCom - Database Computing GmbH

hope this helps

Tbi

[marco0305]

Hi,

Before I release the modules I want the initialisation to be done as well. So any help before I release is welcome.
The problem is that I need to sent about 5 command during initialisation to get the parameters from the Denon. I can do it through a sequence in the HS but I would like to integrate it into the logic module.
There need to be a minimum delay between the commands of 200ms. The first command is easy. Therefore I use the EI. It then sends the PW00?\r command. I then need to sent the second command ST02?\r but with a minimum 200ms delay. Any idea?
Can I use EI and OC[1] as formula?

greets

Marco

[tbi]

Hi Marco,

you can also provide your solution at Download area here in the Forum. Every User can do so ;-)

And for the Logic Module ID ? I think there will be also a solution possible.

BR

Tbi

[marco0305]

Hi,
I've made some logic modules to control a Denon Poa-3012Ci for multiroom audio.
The Denon is connected to a Moxa nport via RS232. I have feedback as well for the 6 zones. Power, Volume and Source.
The only problem I have is the initialisation. I need to send a few commands to the Denon but with a 200ms delay. I know how to sent 1 command when the module gets initialised.
Somebody has any ideas?
The commands I need to sent are for example, PW00?\r folowed by ST02?\r etc.
If somebody is interested in the modules I can email them. Unfortunatly I'm not registered with DACOM so I don't have an assigned series of numbers for modules.
Next on my list will be the Denon AVC-A1HDA. The POA has very few commands compared with the AVC. So this is my debut into logic modules.

Greets

Marco