Ankündigung

Einklappen
Keine Ankündigung bisher.

WG (Linux Debian) als Multiroom-System (Code Sammlung)

Einklappen
X
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge

    #91
    messages
    Code:
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-util.c: Successfully gained nice level -11.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Dies ist PulseAudio 0.9.21-rebootstrapped-dirty
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Seitengröße ist 4096 Bytes.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: System- ID ist 3b064ec91eb024cd4b6df5dd4f26f018.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: System- ID ist 3b064ec91eb024cd4b6df5dd4f26f018-1332790703.360755-934104987.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Nutze Laufzeit-Verzeichnis /root/.pulse/3b064ec91eb024cd4b6df5dd4f26f018-runtime.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Nutze Zustands-Verzeichnis /root/.pulse.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Modul-Verzeichnis /usr/lib/pulse-0.9.21/modules benutzen.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Laufe im System-Modus: no
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Neue hochauslösende Timer verfügbar! Guten Appetit!
    Mar 26 21:40:08 homeserver pulseaudio[19045]: cpu-x86.c: CPU flags: MMX SSE SSE2 SSE3 SSSE3
    Mar 26 21:40:08 homeserver pulseaudio[19045]: svolume_mmx.c: Initialising MMX optimized functions.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: remap_mmx.c: Initialising MMX optimized remappers.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: svolume_sse.c: Initialising SSE2 optimized functions.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: remap_sse.c: Initialising SSE2 optimized remappers.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sconv_sse.c: Initialising SSE2 optimized conversions.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-esound-protocol-unix" (index: #0; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-native-protocol-tcp" (index: #1; argument: "auth-ip-acl=127.0.0.1;192.168.115.0/24;").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-stream-restore.c: Sucessfully opened database file '/root/.pulse/3b064ec91eb024cd4b6df5dd4f26f018-stream-volumes'.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-stream-restore" (index: #2; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-device-restore.c: Sucessfully opened database file '/root/.pulse/3b064ec91eb024cd4b6df5dd4f26f018-device-volumes'.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-device-restore" (index: #3; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-default-device-restore.c: Saved default sink 'null' not existant, not restoring default sink setting.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-default-device-restore.c: Saved default source 'GaeWC.monitor' not existant, not restoring default source setting.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-default-device-restore" (index: #4; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-rescue-streams" (index: #5; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c: Created sink 0 "auto_null" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.description = "Dummy-Ausgabe"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.class = "abstract"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.icon_name = "audio-card"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c: Created source 0 "auto_null.monitor" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.description = "Monitor of Dummy-Ausgabe"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.class = "monitor"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.icon_name = "audio-input-microphone"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-null-sink" (index: #6; argument: "sink_name=auto_null sink_properties='device.description="Dummy-Ausgabe"'").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-always-sink" (index: #7; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-suspend-on-idle" (index: #8; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c: Created sink 1 "null" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.description = "Null Output"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.class = "abstract"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.icon_name = "audio-card"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c: Created source 1 "null.monitor" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.description = "Monitor of Null Output"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.class = "monitor"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.icon_name = "audio-input-microphone"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-always-sink.c: A new sink has been discovered. Unloading null-sink.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-null-sink" (index: #9; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Successfully opened device kanala.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Successfully enabled mmap() mode.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Successfully enabled timer-based scheduling mode.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c: Created sink 2 "GaeWC" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.resolution_bits = "16"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.api = "alsa"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.class = "sound"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.class = "generic"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.subclass = "generic-mix"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.name = "ADC Capture/Standard PCM Playback"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.id = "emu10k1"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.subdevice = "0"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.subdevice_name = "subdevice #0"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.device = "0"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.card = "1"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.card_name = "SB Audigy 2 ZS [SB0350]"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.long_card_name = "SB Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at 0xec00, irq 16"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.driver_name = "snd_emu10k1"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.bus_path = "pci-0000:03:01.0"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     sysfs.path = "/devices/pci0000:00/0000:00:1e.0/0000:03:01.0/sound/card1"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.bus = "pci"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.vendor.id = "1102"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.vendor.name = "Creative Labs"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.product.id = "0004"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.product.name = "SB Audigy"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.string = "kanala"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.buffering.buffer_size = "44104"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.buffering.fragment_size = "22052"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.access_mode = "mmap+timer"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.description = "SB Audigy"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.icon_name = "audio-card-pci"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c: Created source 2 "GaeWC.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.description = "Monitor of SB Audigy"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.class = "monitor"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.icon_name = "audio-input-microphone"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Using 2,0 fragments of size 22052 bytes (125,01ms), buffer size is 44104 bytes (250,02ms)
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Time scheduling watermark is 20,00ms
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Starting playback.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-alsa-sink" (index: #10; argument: "name=GaesteWC sink_name=GaeWC device=kanala channels=2 rate=44100").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.Spawn.ExecFailed: /usr/bin/dbus-launch terminated abnormally without any error message
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Start des Daemons abgeschlossen.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Unloading "module-null-sink" (index: #6).
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c: Freeing sink 0 "auto_null"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c: Freeing source 0 "auto_null.monitor"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Unloaded "module-null-sink" (index: #6).
    Mar 26 21:40:13 homeserver pulseaudio[19045]: module-suspend-on-idle.c: Sink null idle for too long, suspending ...
    Mar 26 21:40:13 homeserver pulseaudio[19045]: module-suspend-on-idle.c: Sink GaeWC idle for too long, suspending ...
    Mar 26 21:40:13 homeserver pulseaudio[19045]: alsa-sink.c: Device suspended...

    syslog
    Code:
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-rtclock.c: Timer slack is set to 50 us.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-util.c: setpriority() worked.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-util.c: Successfully gained nice level -11.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Dies ist PulseAudio 0.9.21-rebootstrapped-dirty
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Kompilier-Host: i486-pc-linux-gnu
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Kompilier-CFLAGS: -g -O2 -g -Wall -O2 -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Laufe auf Host: Linux i686 2.6.32-5-686 #1 SMP Mon Jan 16 16:04:25 UTC 2012
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: 4 CPUs gefunden.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Seitengröße ist 4096 Bytes.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Kompiliere mit Valgrind-Unterstützung: nein
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Läuft im Valgrind-Modus: no
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Running in VM: no
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Optimiertes Build: ja
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Alle Ansprüche aktiviert.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: System- ID ist 3b064ec91eb024cd4b6df5dd4f26f018.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: System- ID ist 3b064ec91eb024cd4b6df5dd4f26f018-1332790703.360755-934104987.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Nutze Laufzeit-Verzeichnis /root/.pulse/3b064ec91eb024cd4b6df5dd4f26f018-runtime.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Nutze Zustands-Verzeichnis /root/.pulse.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Modul-Verzeichnis /usr/lib/pulse-0.9.21/modules benutzen.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Laufe im System-Modus: no
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Neue hochauslösende Timer verfügbar! Guten Appetit!
    Mar 26 21:40:08 homeserver pulseaudio[19045]: cpu-x86.c: CPU flags: MMX SSE SSE2 SSE3 SSSE3
    Mar 26 21:40:08 homeserver pulseaudio[19045]: svolume_mmx.c: Initialising MMX optimized functions.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: remap_mmx.c: Initialising MMX optimized remappers.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: svolume_sse.c: Initialising SSE2 optimized functions.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: remap_sse.c: Initialising SSE2 optimized remappers.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sconv_sse.c: Initialising SSE2 optimized conversions.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: memblock.c: Using shared memory pool with 1024 slots of size 64,0 KB each, total size is 64,0 MB, maximum usable slot size is 65496
    Mar 26 21:40:08 homeserver pulseaudio[19045]: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-esound-protocol-unix.so': success
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-esound-protocol-unix" (index: #0; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-native-protocol-tcp" (index: #1; argument: "auth-ip-acl=127.0.0.1;192.168.115.0/24;").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: database-gdbm.c: Opened GDBM database '/root/.pulse/3b064ec91eb024cd4b6df5dd4f26f018-stream-volumes.i486-pc-linux-gnu.gdbm'
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-stream-restore.c: Sucessfully opened database file '/root/.pulse/3b064ec91eb024cd4b6df5dd4f26f018-stream-volumes'.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-stream-restore" (index: #2; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: database-gdbm.c: Opened GDBM database '/root/.pulse/3b064ec91eb024cd4b6df5dd4f26f018-device-volumes.i486-pc-linux-gnu.gdbm'
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-device-restore.c: Sucessfully opened database file '/root/.pulse/3b064ec91eb024cd4b6df5dd4f26f018-device-volumes'.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-device-restore" (index: #3; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-default-device-restore.c: Saved default sink 'null' not existant, not restoring default sink setting.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-default-device-restore.c: Saved default source 'GaeWC.monitor' not existant, not restoring default source setting.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-default-device-restore" (index: #4; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-rescue-streams" (index: #5; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-always-sink.c: Autoloading null-sink as no other sinks detected.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c: Created sink 0 "auto_null" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.description = "Dummy-Ausgabe"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.class = "abstract"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.icon_name = "audio-card"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-subscribe.c: Dropped redundant event due to change event.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c: Created source 0 "auto_null.monitor" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.description = "Monitor of Dummy-Ausgabe"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.class = "monitor"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.icon_name = "audio-input-microphone"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-null-sink.c: Thread starting up
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-null-sink" (index: #6; argument: "sink_name=auto_null sink_properties='device.description="Dummy-Ausgabe"'").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-always-sink" (index: #7; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-suspend-on-idle" (index: #8; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-subscribe.c: Dropped redundant event due to change event.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c: Created sink 1 "null" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.description = "Null Output"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.class = "abstract"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.icon_name = "audio-card"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-subscribe.c: Dropped redundant event due to change event.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c: Created source 1 "null.monitor" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.description = "Monitor of Null Output"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.class = "monitor"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.icon_name = "audio-input-microphone"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-null-sink.c: Thread starting up
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-suspend-on-idle.c: Sink null becomes idle, timeout in 5 seconds.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-always-sink.c: A new sink has been discovered. Unloading null-sink.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-null-sink" (index: #9; argument: "").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c: Trying kanala with SND_PCM_NO_AUTO_FORMAT ...
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c: Managed to open kanala
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c: Maximum hw buffer size is 250 ms
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Successfully opened device kanala.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Successfully enabled mmap() mode.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Successfully enabled timer-based scheduling mode.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-subscribe.c: Dropped redundant event due to change event.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c: Created sink 2 "GaeWC" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.resolution_bits = "16"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.api = "alsa"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.class = "sound"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.class = "generic"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.subclass = "generic-mix"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.name = "ADC Capture/Standard PCM Playback"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.id = "emu10k1"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.subdevice = "0"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.subdevice_name = "subdevice #0"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.device = "0"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.card = "1"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.card_name = "SB Audigy 2 ZS [SB0350]"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.long_card_name = "SB Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at 0xec00, irq 16"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     alsa.driver_name = "snd_emu10k1"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.bus_path = "pci-0000:03:01.0"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     sysfs.path = "/devices/pci0000:00/0000:00:1e.0/0000:03:01.0/sound/card1"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.bus = "pci"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.vendor.id = "1102"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.vendor.name = "Creative Labs"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.product.id = "0004"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.product.name = "SB Audigy"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.string = "kanala"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.buffering.buffer_size = "44104"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.buffering.fragment_size = "22052"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.access_mode = "mmap+timer"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.description = "SB Audigy"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c:     device.icon_name = "audio-card-pci"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-subscribe.c: Dropped redundant event due to change event.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c: Created source 2 "GaeWC.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.description = "Monitor of SB Audigy"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.class = "monitor"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c:     device.icon_name = "audio-input-microphone"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Using 2,0 fragments of size 22052 bytes (125,01ms), buffer size is 44104 bytes (250,02ms)
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Time scheduling watermark is 20,00ms
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: hwbuf_unused=0
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: setting avail_min=10144
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c: snd_pcm_dump():
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c: Plug PCM: Direct Share PCM
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c: Its setup is:
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   stream       : PLAYBACK
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   access       : MMAP_INTERLEAVED
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   format       : S16_LE
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   subformat    : STD
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   channels     : 2
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   rate         : 44100
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   exact rate   : 44100 (44100/1)
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   msbits       : 16
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   buffer_size  : 11026
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   period_size  : 5513
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   period_time  : 125011
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   tstamp_mode  : ENABLE
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   period_step  : 1
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   avail_min    : 10144
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   period_event : 0
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   start_threshold  : -1
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   stop_threshold   : 1445199872
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   silence_threshold: 0
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   silence_size : 0
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   boundary     : 1445199872
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c: Hardware PCM card 1 'SB Audigy 2 ZS [SB0350]' device 0 subdevice 0
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c: Its setup is:
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   stream       : PLAYBACK
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   access       : MMAP_INTERLEAVED
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   format       : S16_LE
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   subformat    : STD
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   channels     : 2
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   rate         : 44100
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   exact rate   : 44100 (44100/1)
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   msbits       : 16
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   buffer_size  : 11026
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   period_size  : 5513
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   period_time  : 125011
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   tstamp_mode  : ENABLE
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   period_step  : 1
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   avail_min    : 5513
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   period_event : 0
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   start_threshold  : 1
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   stop_threshold   : 1445199872
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   silence_threshold: 0
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   silence_size : 0
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   boundary     : 1445199872
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   appl_ptr     : 0
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-util.c:   hw_ptr       : 0
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Thread starting up
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Starting playback.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Cutting sleep time for the initial iterations by half.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-suspend-on-idle.c: Sink GaeWC becomes idle, timeout in 5 seconds.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Cutting sleep time for the initial iterations by half.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: alsa-sink.c: Cutting sleep time for the initial iterations by half.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Loaded "module-alsa-sink" (index: #10; argument: "name=GaesteWC sink_name=GaeWC device=kanala channels=2 rate=44100").
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-subscribe.c: Dropped redundant event due to change event.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.Spawn.ExecFailed: /usr/bin/dbus-launch terminated abnormally without any error message
    Mar 26 21:40:08 homeserver pulseaudio[19045]: main.c: Start des Daemons abgeschlossen.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Unloading "module-null-sink" (index: #6).
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-rescue-streams.c: No sink inputs to move away.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-rescue-streams.c: No source outputs to move away.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-subscribe.c: Dropped redundant event due to remove event.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-subscribe.c: Dropped redundant event due to remove event.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-subscribe.c: Dropped redundant event due to remove event.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-subscribe.c: Dropped redundant event due to remove event.
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module-null-sink.c: Thread shutting down
    Mar 26 21:40:08 homeserver pulseaudio[19045]: sink.c: Freeing sink 0 "auto_null"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: source.c: Freeing source 0 "auto_null.monitor"
    Mar 26 21:40:08 homeserver pulseaudio[19045]: module.c: Unloaded "module-null-sink" (index: #6).
    Mar 26 21:40:08 homeserver pulseaudio[19045]: core-subscribe.c: Dropped redundant event due to remove event.
    Mar 26 21:40:13 homeserver pulseaudio[19045]: module-suspend-on-idle.c: Sink null idle for too long, suspending ...
    Mar 26 21:40:13 homeserver pulseaudio[19045]: sink.c: Suspend cause of sink null is 0x0004, suspending
    Mar 26 21:40:13 homeserver pulseaudio[19045]: module-suspend-on-idle.c: Sink GaeWC idle for too long, suspending ...
    Mar 26 21:40:13 homeserver pulseaudio[19045]: sink.c: Suspend cause of sink GaeWC is 0x0004, suspending
    Mar 26 21:40:13 homeserver pulseaudio[19045]: alsa-sink.c: Device suspended...

    Kommentar


      #92
      Müsste doch laufen oder?

      Gruß

      ***censored***

      Kommentar


        #93
        Ja laufen tut es.
        Aber ich würde es gerne beim systemstart auch starten.
        Wen ich aber jetzt "/etc/init.d/pulseaudio" start eingebe passirt nichts

        Code:
        homeserver:/var/log# /etc/init.d/pulseaudio start
        homeserver:/var/log#

        Kommentar


          #94
          Nun wenn du dann pulseaudio -k eingibst.
          Sagt er dann nix.

          Oder
          Sagt er: kein Prozess abgebrochen?

          Gruß

          ***censored***

          Kommentar


            #95
            Er sagt "keinen Prozess abgebrochen"

            Kommentar


              #96
              Hmm seltsam dass müsste ja dass Standard pulseaudio init Script sein?
              Ich werde heute sobald ich zuhause bin mal nachsehen wie meins aussieht.
              Mir war was dass bei NilsS auch beim ersten mal starten per init Script der PA abgeschmiert ist. Er hatte da einen fix fürs init Script gepostet.
              Aber nur wo?? Durchforste mal Beiträge mit: Pulseaudio und multiroom. Irgendwo in dem Zusammenhang war dass.

              Gruß

              ***censored***

              Kommentar


                #97
                Also hier mein init Script. Ist aber von pulseaudio (stand debian lemny) weiß nicht ob dass für neuere Versionen auch geht.

                Code:
                #!/bin/sh -e
                ### BEGIN INIT INFO
                # Provides:          pulseaudio esound
                # Required-Start:    $remote_fs $syslog dbus
                # Required-Stop:     $remote_fs $syslog dbus
                # Should-Start:      dbus
                # Should-Stop:       dbus
                # Default-Start:     2 3 4 5
                # Default-Stop:      0 1 6
                # Short-Description: Start the PulseAudio sound server
                # Description:       System mode startup script for
                #                    the PulseAudio sound server.
                ### END INIT INFO
                
                DAEMON=/usr/bin/pulseaudio
                PIDFILE=/var/run/pulse/pid 
                PATH=/sbin:/bin:/usr/sbin:/usr/bin
                
                test -x $DAEMON || exit 0
                
                . /lib/lsb/init-functions
                
                PULSEAUDIO_SYSTEM_START=0
                DISALLOW_MODULE_LOADING=1
                test -f /etc/default/pulseaudio && . /etc/default/pulseaudio
                test "$PULSEAUDIO_SYSTEM_START" != "1" && exit 0
                
                pulseaudio_start () {
                	log_begin_msg "Starting PulseAudio Daemon"
                	start-stop-daemon -x $DAEMON -p $PIDFILE --start -- --system --daemonize --high-priority --log-target=syslog --disallow-module-loading=$DISALLOW_MODULE_LOADING
                	if [ -e /var/run/pulse/.esd_auth ]; then
                		chown pulse:pulse-access /var/run/pulse/.esd_auth
                		chmod 640 /var/run/pulse/.esd_auth
                	fi
                	if [ -e /var/run/pulse/.pulse-cookie ]; then
                		chown pulse:pulse-access /var/run/pulse/.pulse-cookie
                		chmod 640 /var/run/pulse/.pulse-cookie
                	fi
                	log_end_msg $?
                }
                
                pulseaudio_stop () {
                	log_begin_msg "Stopping PulseAudio Daemon"
                	start-stop-daemon -p $PIDFILE --stop || echo -n "... pulseaudio is not running"
                	log_end_msg $?
                }
                
                case "$1" in
                	start|stop)
                		pulseaudio_${1}
                		;;
                	restart|reload|force-reload)
                		pulseaudio_stop
                		pulseaudio_start
                		;;
                	force-stop)
                		pulseaudio_stop
                		killall pulseaudio || true
                		sleep 2
                		killall -9 pulseaudio || true
                		;;
                	*)
                		echo "Usage: /etc/init.d/pulseaudio {start|stop|force-stop|restart|reload|force-reload}"
                		exit 1
                		;;
                esac
                
                exit 0
                Gruß
                ***censored***

                Kommentar


                  #98
                  Also mit deinem Startscript macht er genauviel wie mit meinem.

                  Bin echt am Verzweifeln.

                  Hier mal mein Startscript
                  Code:
                  #!/bin/sh -e
                  ### BEGIN INIT INFO
                  # Provides:          pulseaudio esound
                  # Required-Start:    $remote_fs $syslog dbus
                  # Required-Stop:     $remote_fs $syslog dbus
                  # Should-Start:      dbus
                  # Should-Stop:       dbus
                  # Default-Start:     2 3 4 5
                  # Default-Stop:      1
                  # Short-Description: Start the PulseAudio sound server
                  # Description:       System mode startup script for
                  #                    the PulseAudio sound server.
                  ### END INIT INFO
                  
                  DAEMON=/usr/bin/pulseaudio
                  PIDFILE=/var/run/pulse/pid 
                  PATH=/sbin:/bin:/usr/sbin:/usr/bin
                  
                  test -x $DAEMON || exit 0
                  
                  . /lib/lsb/init-functions
                  
                  PULSEAUDIO_SYSTEM_START=0
                  DISALLOW_MODULE_LOADING=1
                  test -f /etc/default/pulseaudio && . /etc/default/pulseaudio
                  
                  pulseaudio_start () {
                      test "$PULSEAUDIO_SYSTEM_START" != "1" && exit 0
                      log_begin_msg "Starting PulseAudio Daemon"
                      start-stop-daemon -x $DAEMON -p $PIDFILE --start -- --system --daemonize --high-priority --log-target=syslog --disallow-module-loading=$DISALLOW_MODULE_LOADING
                      status=$?
                      if [ -e /var/run/pulse/.esd_auth ]; then
                          chown pulse:pulse-access /var/run/pulse/.esd_auth
                          chmod 640 /var/run/pulse/.esd_auth
                      fi
                      if [ -e /var/run/pulse/.pulse-cookie ]; then
                          chown pulse:pulse-access /var/run/pulse/.pulse-cookie
                          chmod 640 /var/run/pulse/.pulse-cookie
                      fi
                      log_end_msg ${status}
                  }
                  
                  pulseaudio_stop () {
                      log_begin_msg "Stopping PulseAudio Daemon"
                      start-stop-daemon -p $PIDFILE --stop --retry 5 || echo -n "... pulseaudio is not running"
                      log_end_msg $?
                  }
                  
                  case "$1" in
                      start|stop)
                          pulseaudio_${1}
                          ;;
                      restart|reload|force-reload)
                          pulseaudio_stop
                          pulseaudio_start
                          ;;
                      force-stop)
                          pulseaudio_stop
                          killall pulseaudio || true
                          sleep 2
                          killall -9 pulseaudio || true
                          ;;
                      status)
                          status_of_proc $DAEMON pulseaudio -p $PIDFILE
                          exit $?
                          ;;
                      *)
                          echo "Usage: /etc/init.d/pulseaudio {start|stop|force-stop|restart|reload|force-reload|status}"
                          exit 1
                          ;;
                  esac
                  
                  exit 0
                  default.pa
                  Code:
                  #!/usr/bin/pulseaudio -nF
                  #
                  # This file is part of PulseAudio.
                  #
                  # PulseAudio is free software; you can redistribute it and/or modify it
                  # under the terms of the GNU Lesser General Public License as published by
                  # the Free Software Foundation; either version 2 of the License, or
                  # (at your option) any later version.
                  #
                  # PulseAudio is distributed in the hope that it will be useful, but
                  # WITHOUT ANY WARRANTY; without even the implied warranty of
                  # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
                  # General Public License for more details.
                  #
                  # You should have received a copy of the GNU Lesser General Public License
                  # along with PulseAudio; if not, write to the Free Software Foundation,
                  # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
                  
                  # This startup script is used only if PulseAudio is started in system
                  # mode.
                  
                  
                  ### Esound bei Bedarf laden
                  .ifexists module-esound-protocol-unix.so
                  load-module module-esound-protocol-unix
                  .endif
                  
                  ## Network Audio 
                  ## Die IP's anpassen für die Rechner die keine Pulse-Cookie verwenden sollen
                  #load-module module-native-protocol-unix
                  load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.115.0/24;
                  
                  ## CLI
                  #load-module module-cli-protocol-tcp listen=127.0.0.1 port=4712
                  #load-module module-cli-protocol-tcp
                  
                  
                  ### Automatically restore the volume of streams and devices
                  load-module module-stream-restore
                  load-module module-device-restore
                  
                  ### Automatically restore the default sink/source when changed by the user during runtime
                  load-module module-default-device-restore
                  
                  ### Automatically move streams to the default sink if the sink they are
                  ### connected to dies, similar for sources
                  load-module module-rescue-streams
                  
                  ### Make sure we always have a sink around, even if it is a null sink.
                  load-module module-always-sink
                  
                  ### Automatically suspend sinks/sources that become idle for too long
                  load-module module-suspend-on-idle
                  
                  ### Enable positioned event sounds
                  #load-module module-position-event-sounds
                  
                  ## Default NULL Sink
                  load-module module-null-sink
                  
                  ## ALSA Sinks
                  load-module module-alsa-sink name=GaesteWC sink_name=GaeWC device=kanala channels=2 rate=44100
                  #load-module module-alsa-sink name=WCKeller sink_name=WCK device=kanalc channels=2 rate=44100
                  #load-module module-alsa-sink name=Terasse sink_name=Terrasse device=kanalb channels=2 rate=44100
                  
                  ## per AVAHI veröffentlichen
                  #load-module module-zeroconf-publish
                  #load-module module-zeroconf-discover
                  
                  ## Default auf NULL
                  set-default-sink null
                  daemon.conf
                  Code:
                  # This file is part of PulseAudio.
                  #
                  # PulseAudio is free software; you can redistribute it and/or modify
                  # it under the terms of the GNU Lesser General Public License as published by
                  # the Free Software Foundation; either version 2 of the License, or
                  # (at your option) any later version.
                  #
                  # PulseAudio is distributed in the hope that it will be useful, but
                  # WITHOUT ANY WARRANTY; without even the implied warranty of
                  # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
                  # General Public License for more details.
                  #
                  # You should have received a copy of the GNU Lesser General Public License
                  # along with PulseAudio; if not, write to the Free Software
                  # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
                  # USA.
                  
                  ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
                  ## more information. Default values a commented out.  Use either ; or # for
                  ## commenting.
                  
                  daemonize = yes
                  ; fail = yes
                  ; allow-module-loading = yes
                  ; allow-exit = yes
                  ; use-pid-file = yes
                  system-instance = no
                  ; enable-shm = yes
                  ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
                  ; lock-memory = no
                  ; cpu-limit = no
                  
                  ; high-priority = yes
                  ; nice-level = -11
                  
                  ; realtime-scheduling = yes
                  ; realtime-priority = 5
                  
                  ; exit-idle-time = 20
                  ; scache-idle-time = 20
                  
                  ; dl-search-path = (depends on architecture)
                  
                  ; load-default-script-file = yes
                  ; default-script-file = 
                  
                  ; log-target = auto
                  ; log-level = notice
                  ; log-meta = no
                  ; log-time = no
                  ; log-backtrace = 0
                  
                  ; resample-method = speex-float-3
                  ; enable-remixing = yes
                  ; enable-lfe-remixing = no
                  
                  ; flat-volumes = yes
                  
                  ; rlimit-fsize = -1
                  ; rlimit-data = -1
                  ; rlimit-stack = -1
                  ; rlimit-core = -1
                  ; rlimit-as = -1
                  ; rlimit-rss = -1
                  ; rlimit-nproc = -1
                  ; rlimit-nofile = 256
                  ; rlimit-memlock = -1
                  ; rlimit-locks = -1
                  ; rlimit-sigpending = -1
                  ; rlimit-msgqueue = -1
                  ; rlimit-nice = 31
                  ; rlimit-rtprio = 9
                  ; rlimit-rttime = 1000000
                  
                  ; default-sample-format = s16le
                  ; default-sample-rate = 44100
                  ; default-sample-channels = 6
                  ; default-channel-map = front-left,front-right
                  
                  ; default-fragments = 4
                  ; default-fragment-size-msec = 25
                  /etc/default/pulseaudio
                  Code:
                  # Start the PulseAudio sound server in system mode.
                  # (enables the pulseaudio init script)
                  # System mode is not the recommended way to run PulseAudio as it has some
                  # limitations (such as no shared memory access) and could potentially allow
                  # users to disconnect or redirect each others audio streams. The
                  # recommended way to run PulseAudio is as a per-session daemon. For GNOME
                  # sessions you can install pulseaudio-esound-compat and GNOME will
                  # automatically start PulseAudio on login (if ESD is enabled in
                  # System->Preferences->Sound). For other sessions, you can simply start
                  # PulseAudio with "pulseaudio --daemonize".
                  # 0 = don't start, 1 = start
                  PULSEAUDIO_SYSTEM_START=0
                  
                  # Prevent users from dynamically loading modules into the PulseAudio sound
                  # server. Dynamic module loading enhances the flexibility of the PulseAudio
                  # system, but may pose a security risk.
                  # 0 = no, 1 = yes
                  DISALLOW_MODULE_LOADING=1
                  Und zu guter letzt habe ich da auch noch eine andere Frage.
                  Ich habe eine Audigy 2 ZS die auch erkannt wird und unter aplay-l angezeigt wird.
                  Ich bekomme nur keine musik aus ihr heraus.

                  das sagt mir aplay -l
                  Code:
                  homeserver:/var/lib/linknx# aplay -l
                  **** Liste der Hardware-Geräte (PLAYBACK) ****
                  Karte 0: Intel [HDA Intel], Gerät 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
                    Sub-Geräte: 1/1
                    Sub-Gerät #0: subdevice #0
                  Karte 0: Intel [HDA Intel], Gerät 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
                    Sub-Geräte: 1/1
                    Sub-Gerät #0: subdevice #0
                  Karte 1: Audigy2 [SB Audigy 2 ZS [SB0350]], Gerät 0: emu10k1 [ADC Capture/Standard PCM Playback]
                    Sub-Geräte: 32/32
                    Sub-Gerät #0: subdevice #0
                    Sub-Gerät #1: subdevice #1
                    Sub-Gerät #2: subdevice #2
                    Sub-Gerät #3: subdevice #3
                    Sub-Gerät #4: subdevice #4
                    Sub-Gerät #5: subdevice #5
                    Sub-Gerät #6: subdevice #6
                    Sub-Gerät #7: subdevice #7
                    Sub-Gerät #8: subdevice #8
                    Sub-Gerät #9: subdevice #9
                    Sub-Gerät #10: subdevice #10
                    Sub-Gerät #11: subdevice #11
                    Sub-Gerät #12: subdevice #12
                    Sub-Gerät #13: subdevice #13
                    Sub-Gerät #14: subdevice #14
                    Sub-Gerät #15: subdevice #15
                    Sub-Gerät #16: subdevice #16
                    Sub-Gerät #17: subdevice #17
                    Sub-Gerät #18: subdevice #18
                    Sub-Gerät #19: subdevice #19
                    Sub-Gerät #20: subdevice #20
                    Sub-Gerät #21: subdevice #21
                    Sub-Gerät #22: subdevice #22
                    Sub-Gerät #23: subdevice #23
                    Sub-Gerät #24: subdevice #24
                    Sub-Gerät #25: subdevice #25
                    Sub-Gerät #26: subdevice #26
                    Sub-Gerät #27: subdevice #27
                    Sub-Gerät #28: subdevice #28
                    Sub-Gerät #29: subdevice #29
                    Sub-Gerät #30: subdevice #30
                    Sub-Gerät #31: subdevice #31
                  Karte 1: Audigy2 [SB Audigy 2 ZS [SB0350]], Gerät 2: emu10k1 efx [Multichannel Capture/PT Playback]
                    Sub-Geräte: 8/8
                    Sub-Gerät #0: subdevice #0
                    Sub-Gerät #1: subdevice #1
                    Sub-Gerät #2: subdevice #2
                    Sub-Gerät #3: subdevice #3
                    Sub-Gerät #4: subdevice #4
                    Sub-Gerät #5: subdevice #5
                    Sub-Gerät #6: subdevice #6
                    Sub-Gerät #7: subdevice #7
                  Karte 1: Audigy2 [SB Audigy 2 ZS [SB0350]], Gerät 3: emu10k1 [Multichannel Playback]
                    Sub-Geräte: 1/1
                    Sub-Gerät #0: subdevice #0
                  Karte 1: Audigy2 [SB Audigy 2 ZS [SB0350]], Gerät 4: p16v [p16v]
                    Sub-Geräte: 1/1
                    Sub-Gerät #0: subdevice #0
                  und so siehr meine asound.conf aus
                  Code:
                  pcm_slave.int {
                          pcm "hw:1,0"            # or "hw:0,0" for the first card
                          channels 6
                          rate 44100
                  #        format  "S16_LE"
                  }
                  
                  pcm.kanala {
                          type plug;
                          slave.pcm {
                                  type dshare;
                                  ipc_key 1024;
                                  ipc_key_add_uid false;
                                  ipc_gid audio;
                                  ipc_perm 0660;
                                  slave int;
                                  bindings [ 0 1 ];
                          }
                  }
                  pcm.kanalb {
                          type plug;
                          slave.pcm {
                                  type dshare;
                                  ipc_key 1024;
                                  ipc_key_add_uid false;
                                  ipc_gid audio;
                                  ipc_perm 0660;
                                  slave int;
                                  bindings [ 2 3 ];
                          }
                  }
                  pcm.kanalc {
                          type plug;
                          slave.pcm {
                                  type dshare;
                                  ipc_key 1024;
                                  ipc_key_add_uid false;
                                  ipc_gid audio;
                                  ipc_perm 0660;
                                  slave int;
                                  bindings [ 4 5 ];
                          }
                  }
                  pcm.pulse {
                      type pulse
                  }
                  ctl.pulse {
                      type pulse
                  }
                  pcm.!default {
                      type pulse
                  }
                  ctl.!default {
                      type pulse
                  }
                  Wie bekomme ich denn als Hardware Karte Nr.1 und Gerät Nr.2 in meine asound.conf? Mit pcm "hw:1,2" ???

                  Kommentar


                    #99
                    Die erste karte:
                    hw: 0,0

                    Zweite:

                    hw: 1,0

                    Dritte:

                    hw: 2,0


                    Die erste müsste die interne sein.

                    Gruß

                    Gesendet von meinem Sensation mit Tapatalk

                    Kommentar


                      Ja das ist schon klar mit der ersten und der zweiten karte.

                      Aber ich habe bei Karte 2 mehrerer Geräte wie du uben siehst.
                      Ich bekomme dort nur keinen Ton raus.

                      Aus der internen ja. Aber dann habe ich ja nur einen Stereo kanal.
                      Ich möchte aber gerne 4 haben.

                      Sehen denn die anderen einstellungen alle OK aus oder habe ich da was vergessen um zu stellen??

                      Kommentar


                        An sich sehe ich keine Fehler. Hast du schonmal versucht ohne PA direkt auf die pcm devices zu spielen? Mit mpg123 hast dann einen Ton?
                        Nur die Karte ist noch mit "int" gekennzeichnet. Das wird später mal für Verwirrung sorgen

                        Gruß

                        Gesendet von meinem Sensation mit Tapatalk

                        Kommentar


                          Ich habe es jetzt geschafft pulseaudio im system modus mit einem Startscript zu starten.

                          Ich musste einfach eine system.pa haben im pulse verzeichnis.
                          Als Daemon habe ich es nicht hinbekommen.

                          Und die Audigy habe ich wieder ausgebaut.
                          Werde mir wol auch die Logilink holen die ihr auch habt.

                          Naja wenigstens läuft es erstmal und ich hab auf der Toilette wieder Musik *fg*


                          Vielen dan nochmal vlammers für deine super hilfe:-)

                          Kommentar


                            Die system.pa drauchst du in beiden Fällen. Imho (ersetzt in der neuen Version die default.pa )

                            Eigentlich sollte es mit der audigy genauso funktionieren. Ich hab selbst noch 2 stereo Karten, absoluter noname, die auch funktionieren. Sobald Sie erkannt werden, sollte es gehen.

                            Gruß vlamers

                            Gesendet von meinem Sensation mit Tapatalk

                            Kommentar


                              Hallo,
                              ich bin am verzweifeln. Ich versuche das ganze nach Anleitung auf einem Alix mit Debian Squeeze zusammen mit der Logilink-Soundkarte hinzubekommen, kriegs aber nicht zum Laufen.
                              Bis zum Test mit mpg123 geht alles gut - ich höre was.
                              Wenn ich pulseaudio starte (einfach mit pulseaudio), kommt die bekannte Warnmeldung wegen root. In /var/log/messages steht dann die Meldung:

                              pulseaudio[8725]: alsa-mixer.c: Your kernel driver is broken: it reports a volume range from 0.00 dB to 0.00 dB which makes no sense.

                              Mit mpc oder Relaxx kann ich zwar MP3s zur Playlist hinzufügen, beim Abspielen ist aber nichts zu hören bzw. bei Relaxx ist auch keinerlei Info zu sehen, dass jetzt etwas abgespielt wird.
                              Hat jemand eine Idee?

                              Kommentar


                                Das WG ist Debian lenny (5.0) nicht squeeze (6.0), da liegen 2J dazwischen, das ist iSv PA (0.9.10->0.9.21) eine lange Zeit; ergo: Anleitungen für 5.0 müssen da nicht passen, nur die Vorgehensweise ansich.

                                HW!=HW, es gibt viele Alix und viele Installationsvarianten, da muss man schon auch was einstellen damit erstmal der Alsa geht aber ohne Details kann man da wenig zu sagen.

                                Makki
                                EIB/KNX & WireGate & HS3, Russound,mpd,vdr,DM8000, DALI, DMX
                                -> Bitte KEINE PNs!

                                Kommentar

                                Lädt...
                                X