LBS 19000707 - Beschattungssteuerung-Rollo

starwarsfan antwortet

29.07.2024, 11:23
Hi

Zitat von Marino Beitrag anzeigen

Moin Yves,
ich habe ein wenig mit dem LBS (v0.7) rumgespielt und mir ist aufgefallen, dass er sich dabei immer selber sperrt.

Und wo ist der Screenshot der Beschaltung resp. Logik?
Einen Kommentar schreiben:

Marino antwortet

29.07.2024, 11:13

Moin Yves,

ich habe ein wenig mit dem LBS (v0.7) rumgespielt und mir ist aufgefallen, dass er sich dabei immer selber sperrt.
Der LBS befindet sich im Dämmerungsmodus (A7 = -5 / DAWN_FULL_CLOSED) und das Rollo ist komplett geschlossen. E53 bekommt die Höhe vom LBS 19000148, welcher auch E2 triggert (65% bei OPEN, 90% bei AJAR, 100% bei CLOSED).

Der LBS sperrt sich immer wenn zwischen Höhenposition durch Fensterbewegung gefahren wird:

Wird der Behang verfahren und ist gerade zwischen 65% (OPEN) und 90% (AJAR) und ich stelle das Fenster dann aber doch auf Kipp oder schließe es, da es z.B. rein regnet, stellt der LBS A5=1 und benötigt eine 0 auf E11, damit er wieder entsperrt ist und die richtige Position anfährt.
Gleiches passiert, wenn er schon in OPEN-Position (65%) ist und ich dann das Fenster schließe und verriegele, dann sperrt er sich auch.
Fahre ich von CLOSED (100%) auf AJAR (90%), wieder auf CLOSED (100%) und nochmal auf AJAR (90%), ist er auch gesperrt und fährt nicht mehr. Selbst, wenn ich immer warte, bis der Behang in Endposition ist.

Mir ist also noch ein wenig unbegreiflich, warum der LBS sich sperrt.

Unten ist einmal eine Ausgabe für das folgende Szenario:
Dämmerung, A7 = -5.
Behang auf 100%, Fenster geschlossen (CLOSED).
Ich öffne den Griff (Verriegelung könnte kurz AJAR senden, bevor geöffnet wird) und öffne den Flügel. Behang fährt auf 65% (OPEN), stockt aber einmal kurz bei 90% (AJAR).
Ich schließe das Fenster und verriegele (durch das schließen könnte kurz AJAR gesendet werden, bevor verriegelt wird).
Behang bewegt sich nicht mehr, A5 = 1.
Das ist der Auszug unten. Schreibe ich eine 0 auf E11, wird CLOSED angefahren, wo er sich eben noch gesperrt hat.
In dem Beispiel hatte ich E51=150000 und Beschattung aktiv (E41=50000). Aber auch, wenn ich Beschattung deaktiviere, sperrt der LBS sich, habe ich extra nochmal getestet, da momentan die Helligkeit dazwischen liegt.

Vielleicht kennst Du das Verhalten ja oder weiß, wodurch es ausgelöst wird. Vielleicht ist es auch nicht vorgesehen, bei Dämmerung die Behanghöhe ändert, aber ich habe das früher mit einer älteren LBS-Version mal genau so benutzt gehabt und wieder reaktiviert. Ich wüsste nicht, dass ich damals damit Probleme hatte.
Damals hatte ich die Helligkeit angepasst, um den LBS in Dämmerung zu bekommen, gerade weil dann die Fensterpositionen für AJAR oder OPEN angefahren wurden, was mit Sperren mit bestimmter Höhe nicht möglich war und ist, da eine Änderung nach Sperre dann nicht mehr möglich war/ist.

Ziel des ganzen ist es beim Nachtmodus zwangsweise in Dämmerung zu schalten und zum Lüften trotzdem aus der 100%-Pos. zu fahren. Egal, ob die Sonne scheint oder nicht.

Viele Grüße
Nils

Code:

{EDOMI,CUSTOMLOG_Beschattungssteuerung-Rollo_LBS19000707_3702.log,29.07.2024,11:52:33,637346,20124}{Zeitstempel,ms,PID,LogLevel,Meldung}
2024-07-29 11:52:33 637089 20124 INFO: ======================================================================================
2024-07-29 11:52:33 637940 20124 INFO: ===== === = LBS was triggered (v0.7) = === ==========================================
2024-07-29 11:52:33 638142 20124 INFO: <Input>: <Refreshed>|<Value>
2024-07-29 11:52:33 639296 20124 INFO: Trigger: 0|1 Trigger changed output: 1|1 Brightness: 0|20992 Brightness dawn: 0| Elevation: 0|50.558632198933 Azimut: 0|143.57782108384 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-07-29 11:52:33 639622 20124 INFO: ===== === = General trigger for changed outputs refreshed, starting LBS = ============
2024-07-29 11:52:33 648406 20124 INFO: UpdateAlways == false, previous value of A5 equals new value 0, skipping update
2024-07-29 11:52:33 648801 20124 INFO: No lock state detected, set explicit to unlocked
2024-07-29 11:52:33 652482 20124 INFO: === Validating input values... ===
2024-07-29 11:52:33 652868 20124 INFO: === Finished validation of input values ===
2024-07-29 11:52:33 653067 20124 INFO: === Checking if facade is in sun... ===
2024-07-29 11:52:33 655767 20124 INFO: UpdateAlways == false, previous value of A1 equals new value 1, skipping update
2024-07-29 11:52:33 656169 20124 INFO: Virtual depth and height of sun position in 90° to the facade: 0.59373041259044, 1.2156294029902, effective Elevation: 63.968469394241
2024-07-29 11:52:33 658020 20124 INFO: UpdateAlways == false, previous value of A9 equals new value 63.968469394241, skipping update
2024-07-29 11:52:33 659902 20124 INFO: UpdateAlways == false, previous value of A8 equals new value 1, skipping update
2024-07-29 11:52:33 660219 20124 INFO: === Finished facade check, real azimut 143.57782108384° and facade at 90° -> IN SUN (from 20° to 165°), effective elevation 63.968469394241° for given elevation of 50.558632198933° -> in min-max-range (10-90) ===
2024-07-29 11:52:33 660423 20124 INFO: === Calculating shutter state... ===
2024-07-29 11:52:33 661891 20124 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-07-29 11:52:33 662406 20124 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-07-29 11:52:33 662620 20124 INFO: positionShutter(...), Value for height: 90%
2024-07-29 11:52:33 664721 20124 INFO: UpdateAlways == false, previous value of A2 equals new value 0, skipping update
2024-07-29 11:52:33 669709 20124 INFO: UpdateAlways == false, previous A3: 100, updating with 90
2024-07-29 11:52:33 676846 20124 INFO: UpdateAlways == false, previous A4: 255, updating with 230
2024-07-29 11:52:33 681987 20124 INFO: Timer already finished
2024-07-29 11:52:33 686332 20124 INFO: positionShutter(...) for height 90% finished
2024-07-29 11:52:33 686651 20124 INFO: Storing current shutter state -5 and updating output if necessary
2024-07-29 11:52:33 689982 20124 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-07-29 11:52:33 693583 20124 INFO: ===== === = LBS finished = === ===============================================
2024-07-29 11:52:33 693959 20124 INFO: ===
2024-07-29 11:52:33 694153 20124 INFO: ===
2024-07-29 11:52:33 827250 20124 INFO: ======================================================================================
2024-07-29 11:52:33 827663 20124 INFO: ===== === = LBS was triggered (v0.7) = === ==========================================
2024-07-29 11:52:33 827861 20124 INFO: <Input>: <Refreshed>|<Value>
2024-07-29 11:52:33 828427 20124 INFO: Trigger: 0|1 Trigger changed output: 1|1 Brightness: 0|20992 Brightness dawn: 0| Elevation: 0|50.558632198933 Azimut: 0|143.57782108384 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-07-29 11:52:33 828655 20124 INFO: ===== === = General trigger for changed outputs refreshed, starting LBS = ============
2024-07-29 11:52:33 834917 20124 INFO: UpdateAlways == false, previous value of A5 equals new value 0, skipping update
2024-07-29 11:52:33 835428 20124 INFO: No lock state detected, set explicit to unlocked
2024-07-29 11:52:33 838749 20124 INFO: === Validating input values... ===
2024-07-29 11:52:33 839124 20124 INFO: === Finished validation of input values ===
2024-07-29 11:52:33 839319 20124 INFO: === Checking if facade is in sun... ===
2024-07-29 11:52:33 841042 20124 INFO: UpdateAlways == false, previous value of A1 equals new value 1, skipping update
2024-07-29 11:52:33 841583 20124 INFO: Virtual depth and height of sun position in 90° to the facade: 0.59373041259044, 1.2156294029902, effective Elevation: 63.968469394241
2024-07-29 11:52:33 847634 20124 INFO: UpdateAlways == false, previous value of A9 equals new value 63.968469394241, skipping update
2024-07-29 11:52:33 851063 20124 INFO: UpdateAlways == false, previous value of A8 equals new value 1, skipping update
2024-07-29 11:52:33 851547 20124 INFO: === Finished facade check, real azimut 143.57782108384° and facade at 90° -> IN SUN (from 20° to 165°), effective elevation 63.968469394241° for given elevation of 50.558632198933° -> in min-max-range (10-90) ===
2024-07-29 11:52:33 851815 20124 INFO: === Calculating shutter state... ===
2024-07-29 11:52:33 853395 20124 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-07-29 11:52:33 853764 20124 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-07-29 11:52:33 853957 20124 INFO: positionShutter(...), Value for height: 65%
2024-07-29 11:52:33 858304 20124 INFO: UpdateAlways == false, previous value of A2 equals new value 0, skipping update
2024-07-29 11:52:33 863194 20124 INFO: UpdateAlways == false, previous A3: 90, updating with 65
2024-07-29 11:52:33 870781 20124 INFO: UpdateAlways == false, previous A4: 230, updating with 166
2024-07-29 11:52:33 876003 20124 INFO: Timer already finished
2024-07-29 11:52:33 880237 20124 INFO: positionShutter(...) for height 65% finished
2024-07-29 11:52:33 880553 20124 INFO: Storing current shutter state -5 and updating output if necessary
2024-07-29 11:52:33 884219 20124 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-07-29 11:52:33 887618 20124 INFO: ===== === = LBS finished = === ===============================================
2024-07-29 11:52:33 887969 20124 INFO: ===
2024-07-29 11:52:33 888159 20124 INFO: ===
2024-07-29 11:52:36 483066 20124 INFO: ======================================================================================
2024-07-29 11:52:36 483464 20124 INFO: ===== === = LBS was triggered (v0.7) = === ==========================================
2024-07-29 11:52:36 483664 20124 INFO: <Input>: <Refreshed>|<Value>
2024-07-29 11:52:36 484227 20124 INFO: Trigger: 0|1 Trigger changed output: 0|1 Brightness: 0|20992 Brightness dawn: 0| Elevation: 0|50.558632198933 Azimut: 0|143.57782108384 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-07-29 11:52:36 493221 20124 INFO: UpdateAlways == false, previous A5: 0, updating with 1
2024-07-29 11:52:36 495951 20124 INFO: LBS disabled through external height change (89.803921568627 vs 60/70)
2024-07-29 11:52:36 499326 20124 INFO: ===== === = Nothing refreshed, nothing to do = === ===================================
2024-07-29 11:52:43 232930 20124 INFO: ======================================================================================
2024-07-29 11:52:43 233444 20124 INFO: ===== === = LBS was triggered (v0.7) = === ==========================================
2024-07-29 11:52:43 233669 20124 INFO: <Input>: <Refreshed>|<Value>
2024-07-29 11:52:43 234585 20124 INFO: Trigger: 0|1 Trigger changed output: 0|1 Brightness: 0|20992 Brightness dawn: 0| Elevation: 0|50.558632198933 Azimut: 0|143.57782108384 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-07-29 11:52:43 238517 20124 INFO: ===== === = Nothing refreshed, nothing to do = === ===================================
2024-07-29 11:52:45 299134 20124 INFO: ======================================================================================
2024-07-29 11:52:45 299644 20124 INFO: ===== === = LBS was triggered (v0.7) = === ==========================================
2024-07-29 11:52:45 299844 20124 INFO: <Input>: <Refreshed>|<Value>
2024-07-29 11:52:45 300955 20124 INFO: Trigger: 0|1 Trigger changed output: 1|1 Brightness: 0|20992 Brightness dawn: 0| Elevation: 0|50.558632198933 Azimut: 0|143.57782108384 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-07-29 11:52:45 301351 20124 INFO: ===== === = General trigger for changed outputs refreshed, starting LBS = ============
2024-07-29 11:52:45 303783 20124 INFO: ===== === = LBS locked, disabling update of position outputs = === ===================
2024-07-29 11:52:45 305799 20124 INFO: === Validating input values... ===
2024-07-29 11:52:45 306158 20124 INFO: === Finished validation of input values ===
2024-07-29 11:52:45 306354 20124 INFO: === Checking if facade is in sun... ===
2024-07-29 11:52:45 307928 20124 INFO: UpdateAlways == false, previous value of A1 equals new value 1, skipping update
2024-07-29 11:52:45 308473 20124 INFO: Virtual depth and height of sun position in 90° to the facade: 0.59373041259044, 1.2156294029902, effective Elevation: 63.968469394241
2024-07-29 11:52:45 313592 20124 INFO: UpdateAlways == false, previous value of A9 equals new value 63.968469394241, skipping update
2024-07-29 11:52:45 316663 20124 INFO: UpdateAlways == false, previous value of A8 equals new value 1, skipping update
2024-07-29 11:52:45 317053 20124 INFO: === Finished facade check, real azimut 143.57782108384° and facade at 90° -> IN SUN (from 20° to 165°), effective elevation 63.968469394241° for given elevation of 50.558632198933° -> in min-max-range (10-90) ===
2024-07-29 11:52:45 317384 20124 INFO: === Calculating shutter state... ===
2024-07-29 11:52:45 319247 20124 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-07-29 11:52:45 320561 20124 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-07-29 11:52:45 320776 20124 INFO: positionShutter(...), Value for height: 90%
2024-07-29 11:52:45 321800 20124 INFO: LBS locked, not updating outputs
2024-07-29 11:52:45 326534 20124 INFO: Timer already finished
2024-07-29 11:52:45 338768 20124 INFO: positionShutter(...) for height 90% finished
2024-07-29 11:52:45 339140 20124 INFO: Storing current shutter state -5 and updating output if necessary
2024-07-29 11:52:45 343827 20124 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-07-29 11:52:45 347843 20124 INFO: ===== === = LBS finished = === ===============================================
2024-07-29 11:52:45 348234 20124 INFO: ===
2024-07-29 11:52:45 348939 20124 INFO: ===
2024-07-29 11:52:45 476159 20124 INFO: ======================================================================================
2024-07-29 11:52:45 476569 20124 INFO: ===== === = LBS was triggered (v0.7) = === ==========================================
2024-07-29 11:52:45 476769 20124 INFO: <Input>: <Refreshed>|<Value>
2024-07-29 11:52:45 477683 20124 INFO: Trigger: 0|1 Trigger changed output: 1|1 Brightness: 0|20992 Brightness dawn: 0| Elevation: 0|50.558632198933 Azimut: 0|143.57782108384 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-07-29 11:52:45 478025 20124 INFO: ===== === = General trigger for changed outputs refreshed, starting LBS = ============
2024-07-29 11:52:45 480561 20124 INFO: ===== === = LBS locked, disabling update of position outputs = === ===================
2024-07-29 11:52:45 482721 20124 INFO: === Validating input values... ===
2024-07-29 11:52:45 483403 20124 INFO: === Finished validation of input values ===
2024-07-29 11:52:45 483654 20124 INFO: === Checking if facade is in sun... ===
2024-07-29 11:52:45 485551 20124 INFO: UpdateAlways == false, previous value of A1 equals new value 1, skipping update
2024-07-29 11:52:45 486229 20124 INFO: Virtual depth and height of sun position in 90° to the facade: 0.59373041259044, 1.2156294029902, effective Elevation: 63.968469394241
2024-07-29 11:52:45 488466 20124 INFO: UpdateAlways == false, previous value of A9 equals new value 63.968469394241, skipping update
2024-07-29 11:52:45 490597 20124 INFO: UpdateAlways == false, previous value of A8 equals new value 1, skipping update
2024-07-29 11:52:45 490940 20124 INFO: === Finished facade check, real azimut 143.57782108384° and facade at 90° -> IN SUN (from 20° to 165°), effective elevation 63.968469394241° for given elevation of 50.558632198933° -> in min-max-range (10-90) ===
2024-07-29 11:52:45 491194 20124 INFO: === Calculating shutter state... ===
2024-07-29 11:52:45 492708 20124 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-07-29 11:52:45 493042 20124 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-07-29 11:52:45 493331 20124 INFO: positionShutter(...), Value for height: 100%
2024-07-29 11:52:45 494194 20124 INFO: LBS locked, not updating outputs
2024-07-29 11:52:45 497735 20124 INFO: Timer already finished
2024-07-29 11:52:45 506011 20124 INFO: positionShutter(...) for height 100% finished
2024-07-29 11:52:45 506403 20124 INFO: Storing current shutter state -5 and updating output if necessary
2024-07-29 11:52:45 514204 20124 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-07-29 11:52:45 517710 20124 INFO: ===== === = LBS finished = === ===============================================
2024-07-29 11:52:45 518119 20124 INFO: ===
2024-07-29 11:52:45 518361 20124 INFO: ===
2024-07-29 11:53:00 606477 20124 INFO: ======================================================================================
2024-07-29 11:53:00 606926 20124 INFO: ===== === = LBS was triggered (v0.7) = === ==========================================
2024-07-29 11:53:00 607161 20124 INFO: <Input>: <Refreshed>|<Value>
2024-07-29 11:53:00 608617 20124 INFO: Trigger: 0|1 Trigger changed output: 0|1 Brightness: 0|20992 Brightness dawn: 0| Elevation: 0|50.558632198933 Azimut: 1|143.92472160593 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-07-29 11:53:00 609323 20124 INFO: ===== === = Azimut refreshed, starting LBS = === =====================================
2024-07-29 11:53:00 612034 20124 INFO: ===== === = LBS locked, disabling update of position outputs = === ===================
2024-07-29 11:53:00 612409 20124 INFO: ===== === = Brightness, Elevation or Azimut changed = === ====================
2024-07-29 11:53:00 614731 20124 INFO: === Validating input values... ===
2024-07-29 11:53:00 615181 20124 INFO: === Finished validation of input values ===
2024-07-29 11:53:00 615449 20124 INFO: === Checking if facade is in sun... ===
2024-07-29 11:53:00 620354 20124 INFO: UpdateAlways == false, previous value of A1 equals new value 1, skipping update
2024-07-29 11:53:00 620853 20124 INFO: Virtual depth and height of sun position in 90° to the facade: 0.5888476763606, 1.2156294029902, effective Elevation: 64.154574671954
2024-07-29 11:53:00 628465 20124 INFO: UpdateAlways == false, previous A9: 63.968469394241, updating with 64.154574671954
2024-07-29 11:53:00 637407 20124 INFO: UpdateAlways == false, previous value of A8 equals new value 1, skipping update
2024-07-29 11:53:00 638066 20124 INFO: === Finished facade check, real azimut 143.92472160593° and facade at 90° -> IN SUN (from 20° to 165°), effective elevation 64.154574671954° for given elevation of 50.558632198933° -> in min-max-range (10-90) ===
2024-07-29 11:53:00 638299 20124 INFO: === Calculating shutter state... ===
2024-07-29 11:53:00 652571 20124 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-07-29 11:53:00 653013 20124 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-07-29 11:53:00 653332 20124 INFO: positionShutter(...), Value for height: 100%
2024-07-29 11:53:00 657990 20124 INFO: LBS locked, not updating outputs
2024-07-29 11:53:00 662878 20124 INFO: Timer already finished
2024-07-29 11:53:00 668659 20124 INFO: positionShutter(...) for height 100% finished
2024-07-29 11:53:00 669210 20124 INFO: Storing current shutter state -5 and updating output if necessary
2024-07-29 11:53:00 674922 20124 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-07-29 11:53:00 678881 20124 INFO: ===== === = LBS finished = === ===============================================
2024-07-29 11:53:00 679263 20124 INFO: ===
2024-07-29 11:53:00 679485 20124 INFO: ===
2024-07-29 11:53:00 916235 20124 INFO: ======================================================================================
2024-07-29 11:53:00 916618 20124 INFO: ===== === = LBS was triggered (v0.7) = === ==========================================
2024-07-29 11:53:00 916841 20124 INFO: <Input>: <Refreshed>|<Value>
2024-07-29 11:53:00 918293 20124 INFO: Trigger: 0|1 Trigger changed output: 0|1 Brightness: 0|20992 Brightness dawn: 0| Elevation: 1|50.646359992044 Azimut: 0|143.92472160593 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-07-29 11:53:00 918700 20124 INFO: ===== === = Elevation refreshed, starting LBS = === ==================================
2024-07-29 11:53:00 921096 20124 INFO: ===== === = LBS locked, disabling update of position outputs = === ===================
2024-07-29 11:53:00 921534 20124 INFO: ===== === = Brightness, Elevation or Azimut changed = === ====================
2024-07-29 11:53:00 923470 20124 INFO: === Validating input values... ===
2024-07-29 11:53:00 923844 20124 INFO: === Finished validation of input values ===
2024-07-29 11:53:00 924046 20124 INFO: === Checking if facade is in sun... ===
2024-07-29 11:53:00 925813 20124 INFO: UpdateAlways == false, previous value of A1 equals new value 1, skipping update
2024-07-29 11:53:00 926350 20124 INFO: Virtual depth and height of sun position in 90° to the facade: 0.5888476763606, 1.2194302671671, effective Elevation: 64.224682461714
2024-07-29 11:53:00 931427 20124 INFO: UpdateAlways == false, previous A9: 64.154574671954, updating with 64.224682461714
2024-07-29 11:53:00 936681 20124 INFO: UpdateAlways == false, previous value of A8 equals new value 1, skipping update
2024-07-29 11:53:00 937040 20124 INFO: === Finished facade check, real azimut 143.92472160593° and facade at 90° -> IN SUN (from 20° to 165°), effective elevation 64.224682461714° for given elevation of 50.646359992044° -> in min-max-range (10-90) ===
2024-07-29 11:53:00 937374 20124 INFO: === Calculating shutter state... ===
2024-07-29 11:53:00 938922 20124 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-07-29 11:53:00 939281 20124 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-07-29 11:53:00 939471 20124 INFO: positionShutter(...), Value for height: 100%
2024-07-29 11:53:00 943089 20124 INFO: LBS locked, not updating outputs
2024-07-29 11:53:00 947948 20124 INFO: Timer already finished
2024-07-29 11:53:00 952863 20124 INFO: positionShutter(...) for height 100% finished
2024-07-29 11:53:00 953885 20124 INFO: Storing current shutter state -5 and updating output if necessary
2024-07-29 11:53:00 958584 20124 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-07-29 11:53:00 962117 20124 INFO: ===== === = LBS finished = === ===============================================
2024-07-29 11:53:00 962537 20124 INFO: ===
2024-07-29 11:53:00 962758 20124 INFO: ===

Einen Kommentar schreiben:

sipiyou antwortet

09.05.2024, 09:40
starwarsfan:

Hallo Yves,

wie angekündigt, meine sehr späte Rückmeldung

Die 0.6er hat das gleiche Problem, was ich mit der 0.7er hatte. Das Problem ist jedoch, dass ich per Zeitschaltuhr einige Rolladen rauf/runterfahre. (Abends werden diese runtergefahren, damit früh keiner hier geweckt wird, wenn die Sonne scheint).

Das führt dazu, dass der LBS - weshalb auch immer - dann nicht den Status neu setzt.

Ich nutze jetzt E1 für den Trigger und damit läuft es. Hab jetzt die 0.7er eben installiert und werde das die Tage beobachten. Ich gehe allerdings davon aus, dass alles jetzt so läuft, wie es soll.
Einen Kommentar schreiben:
Evolution100 antwortet

19.01.2024, 20:57
Hi Yves,

ich muss nochmal fragen.. du konntest das Verhalten ja nachstellen... das ich mit dem 0.6er und 0.7er Baustein habe nach einem Reboot.... Hast du eine Idee wie man das lösen kann?
Einen Kommentar schreiben:
starwarsfan antwortet

17.01.2024, 22:51
Hi

Zitat von Evolution100 Beitrag anzeigen

hab gerade mal den 0.7er LBS für ein Zimmer eingefügt. Wenn ich hier nichts falsch gemacht habe, dann verhält er sich genau so wie der 0.6er oben beschrieben.

Alles andere hätte mich auch sehr erstaunt, weil sich am Handling der Sperren nichts geändert hat.
Einen Kommentar schreiben:
Evolution100 antwortet

17.01.2024, 20:53
gelöscht.. geht so doch nicht :-( sorry..

Zuletzt geändert von Evolution100; 17.01.2024, 20:57.
Einen Kommentar schreiben:
Evolution100 antwortet

14.01.2024, 15:05
Hi Yves,
genau so ist es. Jetzt kommt aber noch was neues dazu.. das Ganze verhält sich nur so, wenn es Nachts ist. Am Eingang E5 = 0 ist.
Ich hatte es gerade versucht und da ist das Verhalten ganz anders... (hab dann extra mal auf E5 ne 0 und dann ist es wie von Dir beschrieben). Wenn an E5 was anliegt (bei mir gerade 3000) dann klappt alles. Nach dem Reboot wird A5 initialisiert... bei Veränderungen der LBS gesperrt etc.

Eines wäre für mich da nur merkwürdig... Alles funktioniert.. LBS nicht gesperrt, wenn ich dann den Behang manuell verstelle, deaktiviert sich der LBS, dann mach ich einen Reboot und dann initialisiert er sich nicht mehr.

P.S: hab gerade mal den 0.7er LBS für ein Zimmer eingefügt. Wenn ich hier nichts falsch gemacht habe, dann verhält er sich genau so wie der 0.6er oben beschrieben.

Zuletzt geändert von Evolution100; 14.01.2024, 20:46.
Einen Kommentar schreiben:
starwarsfan antwortet

13.01.2024, 21:35
Hallo Markus,

also Dein Problem ist nicht das Verhalten des Verfahrens des Behangs (oder eben auch des nicht-Verfahrens), sondern dass der A5 nach einem Edomi-Neustart nicht initialisiert wird. Genauer gesagt: A5 wird nur dann initialisiert, wenn explizit auf E11 geschrieben wurde. Zumindest konnte ich das so gerade eben in meinem Test-Setup nachstellen.

Nachdem A5 via E11 einmal initialisiert wurde, wird der Ausgang aber korrekt beschrieben. Sprich, nach dem Reboot ist A5 leer. Bewege ich den Behang manuell, bleibt A5 leer. Schreibe ich "0" auf E11, wird auch A5 mit "0" aktualisiert. Wenn ich jetzt den Behang manuell verfahre, wird A5 korrekt auf 1 gesetzt (weil sich der LBS ja jetzt sperrt).

Entspricht das Deiner Beobachtung?
Einen Kommentar schreiben:
Evolution100 antwortet

13.01.2024, 20:46
Hallo Yves ( starwarsfan),

ich glaub ich hab noch immer ein Verständnisproblem oder ein technisches Problem.
Wenn der LBS nicht gesperrt ist und so schön vor sich automatisch hindümpelt... ich dann das Projekt aktiviere, dann sieht es im Logikeditor erstmal so aus als würde alles noch automatisch laufen. E11 ist laut Anzeige auf 0, der Eingang E1 wurde getriggert... meine Variable sagt, LBS nicht gesperrt. Wenn ich nun aber die Jalousien manuell verfahre.. ändert sich an der Statusvariable nix... auch das Triggern an E1 ändert nix.. er fährt weder zu noch stellt er sich auf gesperrt um. Erst wenn ich zu E11 eine 0 schicke, und der Trigger kommt, geht fährt er zu.

Also irgendwie passt dann die Statusanzeige bei mir nicht mehr... vielleicht mach ich auch nur da was falsch?

viele Grüße
Markus
Einen Kommentar schreiben:
Marino antwortet

11.01.2024, 10:02
Du könntest den Code nehmen und Dir einen eigenen LBS mit anderer Nummer erstellen und damit temporär testen. Der alte bleibt dann aktiv und wird nicht überschrieben. Oder eine andere Edomi-Instanz...

Viele Grüße
Nils
Einen Kommentar schreiben:
Evolution100 antwortet

11.01.2024, 09:48
Ok, ich prüf das mal für mich durch..

noch eine Frage zwecks neuer Version. Wie geht man da am Besten vor? Ich würde gerne nur an einem Fenster mit dem neuen LBS testen, das geht aber nicht oder?
Und wie kommt man einfach wieder zurück wenns nicht geht?

Vielen dank fürs helfen
Markus
Einen Kommentar schreiben:
starwarsfan antwortet

10.01.2024, 23:33
Hallo Markus

Zitat von Evolution100 Beitrag anzeigen

So, hier nun alles. Ich hatte den LBS manuell verfahren... dann eine Aktivierung und ab da läuft auch das Logging.
und hier das Bild nach dem Reboot

Ok, das passt alles soweit.

Zitat von Evolution100 Beitrag anzeigen

Trigger an E1 war da, 1912 hab ich nicht geschrieben

Passt auch.

Zitat von Evolution100 Beitrag anzeigen

...
2024-01-10 21:05:18 329381 971866 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:05:18 329469 971866 INFO: Trigger: 0|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|-42.744719667381 Azimut: 0|287.2791125663 Lockstate: 1|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:05:18 329495 971866 INFO: ===== === = Lock refreshed, starting LBS = === =======================================
2024-01-10 21:05:18 330280 971866 INFO: UpdateAlways == false, previous A5: 1, updating with 0
2024-01-10 21:05:18 330821 971866 INFO: === Validating input values... ===
2024-01-10 21:05:18 330848 971866 INFO: === Finished validation of input values ===
2024-01-10 21:05:18 330868 971866 INFO: === Checking if facade is in sun... ===
2024-01-10 21:05:18 330904 971866 INFO: Virtual depth and height of sun position in 90° to the facade: -0.41118207511032, -0.92421959720341, effective Elevation: 66.015885514888
2024-01-10 21:05:18 330926 971866 INFO: UpdateAlways == true, updating A1 with value 0 even if same values than previous ones
2024-01-10 21:05:18 331334 971866 INFO: UpdateAlways == true, updating A8 with value 1 even if same values than previous ones
...

Hier wird der Baustein entsperrt und ab da werden dann auch die Ausgänge wieder beschrieben. Works as designed. Da Du ihn durch das vorherige manuelle Verfahren dazu gebracht hast, dass er sich sperrt, bleibt er das auch nach dem Edomi-Neustart. Das hat mit E1 nichts zu tun oder besser gesagt, die Sperre übersteuert E1, da sie Edomi-Neustarts überleben muss.

Es war extrem nervig, als das noch nicht so war denn das führte dazu, dass bei abendlichen Experimenten mit dem Baustein und einem Edomi-Neustart sich erstmal der gesamte Behang im Haus bewegt hat. Damit fällt der WAF steiler als die Eiger-Nordwand...

Zitat von Evolution100 Beitrag anzeigen

Ich hoffe so passt es besser...

Noch nicht so ganz. Logs, Codeschnipsel etc. gehören in Code-Tags! Oben der Button mit der Raute...
Einen Kommentar schreiben:
Evolution100 antwortet

10.01.2024, 21:18
So, hier nun alles. Ich hatte den LBS manuell verfahren... dann eine Aktivierung und ab da läuft auch das Logging.
und hier das Bild nach dem Reboot

382.jpg

Trigger an E1 war da, 1912 hab ich nicht geschrieben

383.jpg
und hier hab ich dann 1912 mit 0 geschrieben

Und hier das Log
2024-01-10 21:00:38 934204 971268 INFO: ================================================== ====================================
2024-01-10 21:00:38 934302 971268 INFO: ===== === = LBS was triggered (v0.6) = === ==========================================
2024-01-10 21:00:38 934324 971268 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:00:38 934457 971268 INFO: Trigger: 0|1 Trigger changed output: 0| Brightness: 1|0 Brightness dawn: 0| Elevation: 0|-41.967149248531 Azimut: 0|286.1159567125 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:00:38 934493 971268 INFO: ===== === = Brightness refreshed, starting LBS = === =================================
2024-01-10 21:00:38 934751 971268 INFO: ===== === = LBS locked, disabling update of position outputs = === ===================
2024-01-10 21:00:38 934787 971268 INFO: ===== === = Brightness, Elevation or Azimut changed = === ====================
2024-01-10 21:00:38 934946 971268 INFO: === Validating input values... ===
2024-01-10 21:00:38 934974 971268 INFO: === Finished validation of input values ===
2024-01-10 21:00:38 934993 971268 INFO: === Checking if facade is in sun... ===
2024-01-10 21:00:38 935019 971268 INFO: Virtual depth and height of sun position in 90° to the facade: -0.39259326907004, -0.89936639245723, effective Elevation: 66.417669220215
2024-01-10 21:00:38 935206 971268 INFO: UpdateAlways == false, previous value of A1 equals new value 0, skipping update
2024-01-10 21:00:38 935535 971268 INFO: UpdateAlways == false, previous value of A8 equals new value 1, skipping update
2024-01-10 21:00:38 935561 971268 INFO: === Finished facade check, real azimut 286.1159567125° and facade at 173° -> NOT IN SUN (shadow side, at sun from 83° to 263°), effective elevation 66.417669220215° for given elevation of -41.967149248531° -> in min-max-range (0-90) ===
2024-01-10 21:00:38 935583 971268 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:00:38 936142 971268 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-01-10 21:00:38 936178 971268 INFO: === Calculating shutter state... ===
2024-01-10 21:00:38 936364 971268 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-01-10 21:00:38 936393 971268 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-01-10 21:00:38 936412 971268 INFO: positionShutter(...), Value for height: 100%
2024-01-10 21:00:38 936764 971268 INFO: LBS locked, not updating outputs
2024-01-10 21:00:38 937149 971268 INFO: Timer already finished
2024-01-10 21:00:38 937778 971268 INFO: positionShutter(...) for height 100% finished
2024-01-10 21:00:38 937813 971268 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:00:38 938308 971268 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-01-10 21:00:38 938669 971268 INFO: ===== === = LBS finished = === ===============================================
2024-01-10 21:00:38 938697 971268 INFO: ===
2024-01-10 21:00:38 938714 971268 INFO: ===
2024-01-10 21:01:13 779139 971866 INFO: ================================================== ====================================
2024-01-10 21:01:13 779184 971866 INFO: ===== === = LBS was triggered (v0.6) = === ==========================================
2024-01-10 21:01:13 779206 971866 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:01:13 779309 971866 INFO: Trigger: 0|0 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|45 Azimut: 0|180 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:01:13 779375 971866 INFO: ===== === = Nothing refreshed, nothing to do = === ===================================
2024-01-10 21:01:43 133136 971866 INFO: ================================================== ====================================
2024-01-10 21:01:43 133198 971866 INFO: ===== === = LBS was triggered (v0.6) = === ==========================================
2024-01-10 21:01:43 133219 971866 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:01:43 133347 971866 INFO: Trigger: 0|0 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|45 Azimut: 0|180 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:01:43 134372 971866 INFO: UpdateAlways == false, previous value of A5 equals new value 1, skipping update
2024-01-10 21:01:43 134407 971866 INFO: LBS disabled through external height change (87.843137254902 vs -8/8)
2024-01-10 21:01:43 134587 971866 INFO: ===== === = Nothing refreshed, nothing to do = === ===================================
2024-01-10 21:04:05 409213 971866 INFO: ================================================== ====================================
2024-01-10 21:04:05 409276 971866 INFO: ===== === = LBS was triggered (v0.6) = === ==========================================
2024-01-10 21:04:05 409298 971866 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:04:05 409424 971866 INFO: Trigger: 1|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|45 Azimut: 0|180 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:04:05 409460 971866 INFO: ===== === = General trigger refreshed, starting LBS = === ============================
2024-01-10 21:04:05 409665 971866 INFO: ===== === = LBS locked, disabling update of position outputs = === ===================
2024-01-10 21:04:05 409821 971866 INFO: ===== === = Initial LBS run, updating all outputs = === ======================
2024-01-10 21:04:05 409948 971866 INFO: === Validating input values... ===
2024-01-10 21:04:05 409976 971866 INFO: === Finished validation of input values ===
2024-01-10 21:04:05 409995 971866 INFO: === Checking if facade is in sun... ===
2024-01-10 21:04:05 410021 971866 INFO: Virtual depth and height of sun position in 90° to the facade: 0.99254615164132, 1, effective Elevation: 45.214334839661
2024-01-10 21:04:05 410043 971866 INFO: UpdateAlways == true, updating A1 with value 1 even if same values than previous ones
2024-01-10 21:04:05 410820 971866 INFO: UpdateAlways == true, updating A8 with value 1 even if same values than previous ones
2024-01-10 21:04:05 411422 971866 INFO: === Finished facade check, real azimut 180° and facade at 173° -> IN SUN (from 83° to 263°), effective elevation 45.214334839661° for given elevation of 45° -> in min-max-range (0-90) ===
2024-01-10 21:04:05 411459 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:04:05 411803 971866 INFO: UpdateAlways == true, updating A7 with value -5 even if same values than previous ones
2024-01-10 21:04:05 412352 971866 INFO: === Calculating shutter state... ===
2024-01-10 21:04:05 412587 971866 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-01-10 21:04:05 412616 971866 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-01-10 21:04:05 412636 971866 INFO: positionShutter(...), Value for height: 100%
2024-01-10 21:04:05 412815 971866 INFO: Initial LBS run, not updating outputs
2024-01-10 21:04:05 413252 971866 INFO: Timer already finished
2024-01-10 21:04:05 413790 971866 INFO: positionShutter(...) for height 100% finished
2024-01-10 21:04:05 413816 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:04:05 414084 971866 INFO: UpdateAlways == true, updating A7 with value -5 even if same values than previous ones
2024-01-10 21:04:05 414817 971866 INFO: ===== === = LBS finished = === ===============================================
2024-01-10 21:04:05 414841 971866 INFO: ===
2024-01-10 21:04:05 414860 971866 INFO: ===
2024-01-10 21:04:05 512267 971866 INFO: ================================================== ====================================
2024-01-10 21:04:05 512314 971866 INFO: ===== === = LBS was triggered (v0.6) = === ==========================================
2024-01-10 21:04:05 512343 971866 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:04:05 512398 971866 INFO: Trigger: 0|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|45 Azimut: 0|180 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:04:05 512454 971866 INFO: ===== === = Nothing refreshed, nothing to do = === ===================================
2024-01-10 21:05:00 291666 971866 INFO: ================================================== ====================================
2024-01-10 21:05:00 291707 971866 INFO: ===== === = LBS was triggered (v0.6) = === ==========================================
2024-01-10 21:05:00 291728 971866 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:05:00 291821 971866 INFO: Trigger: 1|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|45 Azimut: 0|180 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:05:00 291847 971866 INFO: ===== === = General trigger refreshed, starting LBS = === ============================
2024-01-10 21:05:00 292041 971866 INFO: ===== === = LBS locked, disabling update of position outputs = === ===================
2024-01-10 21:05:00 292195 971866 INFO: === Validating input values... ===
2024-01-10 21:05:00 292222 971866 INFO: === Finished validation of input values ===
2024-01-10 21:05:00 292242 971866 INFO: === Checking if facade is in sun... ===
2024-01-10 21:05:00 292265 971866 INFO: Virtual depth and height of sun position in 90° to the facade: 0.99254615164132, 1, effective Elevation: 45.214334839661
2024-01-10 21:05:00 292289 971866 INFO: UpdateAlways == true, updating A1 with value 1 even if same values than previous ones
2024-01-10 21:05:00 292877 971866 INFO: UpdateAlways == true, updating A8 with value 1 even if same values than previous ones
2024-01-10 21:05:00 293293 971866 INFO: === Finished facade check, real azimut 180° and facade at 173° -> IN SUN (from 83° to 263°), effective elevation 45.214334839661° for given elevation of 45° -> in min-max-range (0-90) ===
2024-01-10 21:05:00 293323 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:05:00 293596 971866 INFO: UpdateAlways == true, updating A7 with value -5 even if same values than previous ones
2024-01-10 21:05:00 294045 971866 INFO: === Calculating shutter state... ===
2024-01-10 21:05:00 294208 971866 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-01-10 21:05:00 294234 971866 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-01-10 21:05:00 294253 971866 INFO: positionShutter(...), Value for height: 100%
2024-01-10 21:05:00 294528 971866 INFO: LBS locked, not updating outputs
2024-01-10 21:05:00 294904 971866 INFO: Timer already finished
2024-01-10 21:05:00 295376 971866 INFO: positionShutter(...) for height 100% finished
2024-01-10 21:05:00 295399 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:05:00 295665 971866 INFO: UpdateAlways == true, updating A7 with value -5 even if same values than previous ones
2024-01-10 21:05:00 296269 971866 INFO: ===== === = LBS finished = === ===============================================
2024-01-10 21:05:00 296293 971866 INFO: ===
2024-01-10 21:05:00 296310 971866 INFO: ===
2024-01-10 21:05:00 407166 971866 INFO: ================================================== ====================================
2024-01-10 21:05:00 407200 971866 INFO: ===== === = LBS was triggered (v0.6) = === ==========================================
2024-01-10 21:05:00 407221 971866 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:05:00 407306 971866 INFO: Trigger: 0|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|45 Azimut: 1|287.2791125663 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:05:00 407331 971866 INFO: ===== === = Azimut refreshed, starting LBS = === =====================================
2024-01-10 21:05:00 407563 971866 INFO: ===== === = LBS locked, disabling update of position outputs = === ===================
2024-01-10 21:05:00 407599 971866 INFO: ===== === = Brightness, Elevation or Azimut changed = === ====================
2024-01-10 21:05:00 407783 971866 INFO: === Validating input values... ===
2024-01-10 21:05:00 407812 971866 INFO: === Finished validation of input values ===
2024-01-10 21:05:00 407831 971866 INFO: === Checking if facade is in sun... ===
2024-01-10 21:05:00 407855 971866 INFO: Virtual depth and height of sun position in 90° to the facade: -0.41118207511032, 1, effective Elevation: -67.648413642475
2024-01-10 21:05:00 408226 971866 INFO: UpdateAlways == false, previous A1: 1, updating with 0
2024-01-10 21:05:00 408878 971866 INFO: UpdateAlways == false, previous value of A8 equals new value 0, skipping update
2024-01-10 21:05:00 408911 971866 INFO: === Finished facade check, real azimut 287.2791125663° and facade at 173° -> NOT IN SUN (shadow side, at sun from 83° to 263°), effective elevation -67.648413642475° for given elevation of 45° -> NOT in min-max-range (0-90) ===
2024-01-10 21:05:00 408935 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:05:00 409307 971866 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-01-10 21:05:00 409332 971866 INFO: === Calculating shutter state... ===
2024-01-10 21:05:00 409480 971866 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-01-10 21:05:00 409504 971866 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-01-10 21:05:00 409529 971866 INFO: positionShutter(...), Value for height: 100%
2024-01-10 21:05:00 409841 971866 INFO: LBS locked, not updating outputs
2024-01-10 21:05:00 410274 971866 INFO: Timer already finished
2024-01-10 21:05:00 410744 971866 INFO: positionShutter(...) for height 100% finished
2024-01-10 21:05:00 410769 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:05:00 411137 971866 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-01-10 21:05:00 411380 971866 INFO: ===== === = LBS finished = === ===============================================
2024-01-10 21:05:00 411402 971866 INFO: ===
2024-01-10 21:05:00 411421 971866 INFO: ===
2024-01-10 21:05:00 486545 971866 INFO: ================================================== ====================================
2024-01-10 21:05:00 486576 971866 INFO: ===== === = LBS was triggered (v0.6) = === ==========================================
2024-01-10 21:05:00 486596 971866 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:05:00 486645 971866 INFO: Trigger: 0|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 1|-42.744719667381 Azimut: 0|287.2791125663 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:05:00 486671 971866 INFO: ===== === = Elevation refreshed, starting LBS = === ==================================
2024-01-10 21:05:00 486861 971866 INFO: ===== === = LBS locked, disabling update of position outputs = === ===================
2024-01-10 21:05:00 486886 971866 INFO: ===== === = Brightness, Elevation or Azimut changed = === ====================
2024-01-10 21:05:00 487061 971866 INFO: === Validating input values... ===
2024-01-10 21:05:00 487090 971866 INFO: === Finished validation of input values ===
2024-01-10 21:05:00 487108 971866 INFO: === Checking if facade is in sun... ===
2024-01-10 21:05:00 487131 971866 INFO: Virtual depth and height of sun position in 90° to the facade: -0.41118207511032, -0.92421959720341, effective Elevation: 66.015885514888
2024-01-10 21:05:00 487260 971866 INFO: UpdateAlways == false, previous value of A1 equals new value 0, skipping update
2024-01-10 21:05:00 487488 971866 INFO: UpdateAlways == false, previous value of A8 equals new value 1, skipping update
2024-01-10 21:05:00 487513 971866 INFO: === Finished facade check, real azimut 287.2791125663° and facade at 173° -> NOT IN SUN (shadow side, at sun from 83° to 263°), effective elevation 66.015885514888° for given elevation of -42.744719667381° -> in min-max-range (0-90) ===
2024-01-10 21:05:00 487534 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:05:00 487929 971866 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-01-10 21:05:00 487960 971866 INFO: === Calculating shutter state... ===
2024-01-10 21:05:00 488106 971866 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-01-10 21:05:00 488131 971866 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-01-10 21:05:00 488148 971866 INFO: positionShutter(...), Value for height: 100%
2024-01-10 21:05:00 488414 971866 INFO: LBS locked, not updating outputs
2024-01-10 21:05:00 488842 971866 INFO: Timer already finished
2024-01-10 21:05:00 489345 971866 INFO: positionShutter(...) for height 100% finished
2024-01-10 21:05:00 489371 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:05:00 489737 971866 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-01-10 21:05:00 490010 971866 INFO: ===== === = LBS finished = === ===============================================
2024-01-10 21:05:00 490042 971866 INFO: ===
2024-01-10 21:05:00 490062 971866 INFO: ===
2024-01-10 21:05:00 554399 971866 INFO: ================================================== ====================================
2024-01-10 21:05:00 554431 971866 INFO: ===== === = LBS was triggered (v0.6) = === ==========================================
2024-01-10 21:05:00 554452 971866 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:05:00 554503 971866 INFO: Trigger: 0|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|-42.744719667381 Azimut: 0|287.2791125663 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:05:00 554558 971866 INFO: ===== === = Nothing refreshed, nothing to do = === ===================================
2024-01-10 21:05:18 329324 971866 INFO: ================================================== ====================================
2024-01-10 21:05:18 329360 971866 INFO: ===== === = LBS was triggered (v0.6) = === ==========================================
2024-01-10 21:05:18 329381 971866 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:05:18 329469 971866 INFO: Trigger: 0|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|-42.744719667381 Azimut: 0|287.2791125663 Lockstate: 1|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:05:18 329495 971866 INFO: ===== === = Lock refreshed, starting LBS = === =======================================
2024-01-10 21:05:18 330280 971866 INFO: UpdateAlways == false, previous A5: 1, updating with 0
2024-01-10 21:05:18 330821 971866 INFO: === Validating input values... ===
2024-01-10 21:05:18 330848 971866 INFO: === Finished validation of input values ===
2024-01-10 21:05:18 330868 971866 INFO: === Checking if facade is in sun... ===
2024-01-10 21:05:18 330904 971866 INFO: Virtual depth and height of sun position in 90° to the facade: -0.41118207511032, -0.92421959720341, effective Elevation: 66.015885514888
2024-01-10 21:05:18 330926 971866 INFO: UpdateAlways == true, updating A1 with value 0 even if same values than previous ones
2024-01-10 21:05:18 331334 971866 INFO: UpdateAlways == true, updating A8 with value 1 even if same values than previous ones
2024-01-10 21:05:18 331645 971866 INFO: === Finished facade check, real azimut 287.2791125663° and facade at 173° -> NOT IN SUN (shadow side, at sun from 83° to 263°), effective elevation 66.015885514888° for given elevation of -42.744719667381° -> in min-max-range (0-90) ===
2024-01-10 21:05:18 331670 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:05:18 331914 971866 INFO: UpdateAlways == true, updating A7 with value -5 even if same values than previous ones
2024-01-10 21:05:18 332331 971866 INFO: === Calculating shutter state... ===
2024-01-10 21:05:18 332489 971866 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-01-10 21:05:18 332540 971866 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-01-10 21:05:18 332573 971866 INFO: positionShutter(...), Value for height: 100%
2024-01-10 21:05:18 332847 971866 INFO: UpdateAlways == true, updating A2 with value 0 even if same values than previous ones
2024-01-10 21:05:18 333585 971866 INFO: UpdateAlways == true, updating A3 with value 100 even if same values than previous ones
2024-01-10 21:05:18 334193 971866 INFO: UpdateAlways == true, updating A4 with value 255 even if same values than previous ones
2024-01-10 21:05:18 335067 971866 INFO: Timer already finished
2024-01-10 21:05:18 335535 971866 INFO: positionShutter(...) for height 100% finished
2024-01-10 21:05:18 335560 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:05:18 335870 971866 INFO: UpdateAlways == true, updating A7 with value -5 even if same values than previous ones
2024-01-10 21:05:18 336544 971866 INFO: ===== === = LBS finished = === ===============================================
2024-01-10 21:05:18 336586 971866 INFO: ===
2024-01-10 21:05:18 336605 971866 INFO: ===
2024-01-10 21:05:18 346071 971866 INFO: ================================================== ====================================
2024-01-10 21:05:18 346101 971866 INFO: ===== === = LBS was triggered (v0.6) = === ==========================================
2024-01-10 21:05:18 346122 971866 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:05:18 346208 971866 INFO: Trigger: 0|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|-42.744719667381 Azimut: 0|287.2791125663 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:05:18 346270 971866 INFO: ===== === = Nothing refreshed, nothing to do = === ===================================
2024-01-10 21:05:38 829787 971866 INFO: ================================================== ====================================
2024-01-10 21:05:38 829832 971866 INFO: ===== === = LBS was triggered (v0.6) = === ==========================================
2024-01-10 21:05:38 829854 971866 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:05:38 829987 971866 INFO: Trigger: 0|1 Trigger changed output: 0| Brightness: 1|0 Brightness dawn: 0| Elevation: 0|-42.744719667381 Azimut: 0|287.2791125663 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:05:38 830023 971866 INFO: ===== === = Brightness refreshed, starting LBS = === =================================
2024-01-10 21:05:38 830756 971866 INFO: UpdateAlways == false, previous value of A5 equals new value 0, skipping update
2024-01-10 21:05:38 830952 971866 INFO: ===== === = Brightness, Elevation or Azimut changed = === ====================
2024-01-10 21:05:38 831136 971866 INFO: === Validating input values... ===
2024-01-10 21:05:38 831167 971866 INFO: === Finished validation of input values ===
2024-01-10 21:05:38 831187 971866 INFO: === Checking if facade is in sun... ===
2024-01-10 21:05:38 831212 971866 INFO: Virtual depth and height of sun position in 90° to the facade: -0.41118207511032, -0.92421959720341, effective Elevation: 66.015885514888
2024-01-10 21:05:38 831340 971866 INFO: UpdateAlways == false, previous value of A1 equals new value 0, skipping update
2024-01-10 21:05:38 831568 971866 INFO: UpdateAlways == false, previous value of A8 equals new value 1, skipping update
2024-01-10 21:05:38 831592 971866 INFO: === Finished facade check, real azimut 287.2791125663° and facade at 173° -> NOT IN SUN (shadow side, at sun from 83° to 263°), effective elevation 66.015885514888° for given elevation of -42.744719667381° -> in min-max-range (0-90) ===
2024-01-10 21:05:38 831614 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:05:38 832061 971866 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-01-10 21:05:38 832084 971866 INFO: === Calculating shutter state... ===
2024-01-10 21:05:38 832271 971866 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-01-10 21:05:38 832295 971866 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-01-10 21:05:38 832314 971866 INFO: positionShutter(...), Value for height: 100%
2024-01-10 21:05:38 832828 971866 INFO: UpdateAlways == false, previous value of A2 equals new value 0, skipping update
2024-01-10 21:05:38 833122 971866 INFO: UpdateAlways == false, previous value of A3 equals new value 100, skipping update
2024-01-10 21:05:38 833314 971866 INFO: UpdateAlways == false, previous value of A4 equals new value 255, skipping update
2024-01-10 21:05:38 833789 971866 INFO: Timer already finished
2024-01-10 21:05:38 834270 971866 INFO: positionShutter(...) for height 100% finished
2024-01-10 21:05:38 834295 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:05:38 834666 971866 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-01-10 21:05:38 834912 971866 INFO: ===== === = LBS finished = === ===============================================
2024-01-10 21:05:38 834934 971866 INFO: ===
2024-01-10 21:05:38 834953 971866 INFO: ===
2024-01-10 21:05:53 636971 971866 INFO: ================================================== ====================================
2024-01-10 21:05:53 637032 971866 INFO: ===== === = LBS was triggered (v0.6) = === ==========================================
2024-01-10 21:05:53 637053 971866 INFO: <Input>: <Refreshed>|<Value>
2024-01-10 21:05:53 637175 971866 INFO: Trigger: 0|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|-42.744719667381 Azimut: 0|287.2791125663 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0
2024-01-10 21:05:53 637516 971866 INFO: ===== === = Input height refreshed, starting LBS = === ===============================
2024-01-10 21:05:53 638086 971866 INFO: UpdateAlways == false, previous value of A5 equals new value 0, skipping update
2024-01-10 21:05:53 638601 971866 INFO: === Validating input values... ===
2024-01-10 21:05:53 638639 971866 INFO: === Finished validation of input values ===
2024-01-10 21:05:53 638662 971866 INFO: === Checking if facade is in sun... ===
2024-01-10 21:05:53 638685 971866 INFO: Virtual depth and height of sun position in 90° to the facade: -0.41118207511032, -0.92421959720341, effective Elevation: 66.015885514888
2024-01-10 21:05:53 638909 971866 INFO: UpdateAlways == false, previous value of A1 equals new value 0, skipping update
2024-01-10 21:05:53 639348 971866 INFO: UpdateAlways == false, previous value of A8 equals new value 1, skipping update
2024-01-10 21:05:53 639383 971866 INFO: === Finished facade check, real azimut 287.2791125663° and facade at 173° -> NOT IN SUN (shadow side, at sun from 83° to 263°), effective elevation 66.015885514888° for given elevation of -42.744719667381° -> in min-max-range (0-90) ===
2024-01-10 21:05:53 639406 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:05:53 639908 971866 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-01-10 21:05:53 639942 971866 INFO: === Calculating shutter state... ===
2024-01-10 21:05:53 640105 971866 INFO: Handling current shutter state DAWN_FULL_CLOSED (-5)
2024-01-10 21:05:53 640141 971866 INFO: Recalculating shutter position out of state DAWN_FULL_CLOSED
2024-01-10 21:05:53 640161 971866 INFO: positionShutter(...), Value for height: 100%
2024-01-10 21:05:53 640685 971866 INFO: UpdateAlways == false, previous value of A2 equals new value 0, skipping update
2024-01-10 21:05:53 641055 971866 INFO: UpdateAlways == false, previous value of A3 equals new value 100, skipping update
2024-01-10 21:05:53 641319 971866 INFO: UpdateAlways == false, previous value of A4 equals new value 255, skipping update
2024-01-10 21:05:53 642005 971866 INFO: Timer already finished
2024-01-10 21:05:53 642633 971866 INFO: positionShutter(...) for height 100% finished
2024-01-10 21:05:53 642663 971866 INFO: Storing current shutter state -5 and updating output if necessary
2024-01-10 21:05:53 643071 971866 INFO: UpdateAlways == false, previous value of A7 equals new value -5, skipping update
2024-01-10 21:05:53 643321 971866 INFO: ===== === = LBS finished = === ===============================================
2024-01-10 21:05:53 643343 971866 INFO: ===
2024-01-10 21:05:53 643362 971866 INFO: ===

Ich hoffe so passt es besser...
Danke fürs helfen!
Markus
Einen Kommentar schreiben:
starwarsfan antwortet

10.01.2024, 08:32
Hi

Zitat von Evolution100 Beitrag anzeigen

Hier nochmal das gleiche Bild mit E1
3333.jpg

Sorry aber das nützt mir nicht viel. Ich muss die ganze Logik sehen. Ohne zu wissen, was da noch so auf den Eingängen los ist, sagt das nicht viel aus.

Zitat von Evolution100 Beitrag anzeigen

Ich hab das logging noch aktiviert und hier eingebunden (ich hoffe, das Format ist so ok?)

Nein, ist es nicht. Wer soll das denn lesen? Logs niemals als html sondern immer in Textform bitte.
Einen Kommentar schreiben:

Evolution100 antwortet

09.01.2024, 23:20

Hallo Yves,

danke für die schnelle Rückmeldung.

Also an E1 hängt das SystemKO 25 (Trigger alle 5 min) über ein Oder Gatter. Da hab ich noch eine Schaltung dahinter, die morgens (in einer bestimmten Zeit) öfter triggert und vorher die Helligkeitswerte von der Wetterstation abholt, damit ich nicht so einen starken Verzug am morgen hab.
Das obere Bild war bereits mit einem Trigger (1) auf dem E1.

Hier nochmal das gleiche Bild mit E1
3333.jpg

Ich hab das logging noch aktiviert und hier eingebunden (ich hoffe, das Format ist so ok?)

Code:

  [TABLE="border: 0, cellpadding: 0, cellspacing: 0"]
  [TR]
  [TD]Zeitstempel[/TD]
  [TD]ms[/TD]
  [TD]PID[/TD]
  [TD]LogLevel[/TD]
  [TD]Meldung[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:11:52[/TD]
  [TD]707793[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]======================================================================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:11:52[/TD]
  [TD]707879[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS was triggered (v0.6) = === ==========================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:11:52[/TD]
  [TD]707905[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]<Input>: <Refreshed>|<Value>[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:11:52[/TD]
  [TD]708013[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Trigger: 0|0 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|45 Azimut: 0|180 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:11:52[/TD]
  [TD]708077[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = Nothing refreshed, nothing to do = === ===================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:12:22[/TD]
  [TD]083358[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]======================================================================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:12:22[/TD]
  [TD]083419[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS was triggered (v0.6) = === ==========================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:12:22[/TD]
  [TD]083441[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]<Input>: <Refreshed>|<Value>[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:12:22[/TD]
  [TD]083570[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Trigger: 0|0 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|45 Azimut: 0|180 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:12:22[/TD]
  [TD]084647[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == false, previous value of A5 equals new value 1, skipping update[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:12:22[/TD]
  [TD]084683[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]LBS disabled through external height change (100 vs -8/8)[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:12:22[/TD]
  [TD]084952[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = Nothing refreshed, nothing to do = === ===================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]198719[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]======================================================================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]198779[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS was triggered (v0.6) = === ==========================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]198801[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]<Input>: <Refreshed>|<Value>[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]198916[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Trigger: 1|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|45 Azimut: 0|180 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]198956[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = General trigger refreshed, starting LBS = === ============================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]199202[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS locked, disabling update of position outputs = === ===================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]199387[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = Initial LBS run, updating all outputs = === ======================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]199424[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Validating input values... ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]199446[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Finished validation of input values ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]199465[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Checking if facade is in sun... ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]199490[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Virtual depth and height of sun position in 90° to the facade: 0.99254615164132, 1, effective Elevation: 45.214334839661[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]199512[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == true, updating A1 with value 1 even if same values than previous ones[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]200158[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == true, updating A8 with value 1 even if same values than previous ones[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]200654[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Finished facade check, real azimut 180° and facade at 173° -> IN SUN (from 83° to 263°), effective elevation 45.214334839661° for given elevation of 45° -> in min-max-range (0-90) ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]200691[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Storing current shutter state -5 and updating output if necessary[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]200998[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == true, updating A7 with value -5 even if same values than previous ones[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]201572[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Calculating shutter state... ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]201751[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Handling current shutter state DAWN_FULL_CLOSED (-5)[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]201780[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Recalculating shutter position out of state DAWN_FULL_CLOSED[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]201798[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]positionShutter(...), Value for height: 100%[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]201947[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Initial LBS run, not updating outputs[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]202393[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Timer already finished[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]202971[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]positionShutter(...) for height 100% finished[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]202996[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Storing current shutter state -5 and updating output if necessary[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]203242[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == true, updating A7 with value -5 even if same values than previous ones[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]203938[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS finished = === ===============================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]203973[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]203994[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]352540[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]======================================================================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]352587[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS was triggered (v0.6) = === ==========================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]352608[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]<Input>: <Refreshed>|<Value>[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]352734[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Trigger: 0|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|45 Azimut: 0|180 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:13:47[/TD]
  [TD]352804[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = Nothing refreshed, nothing to do = === ===================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]154330[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]======================================================================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]154371[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS was triggered (v0.6) = === ==========================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]154395[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]<Input>: <Refreshed>|<Value>[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]154484[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Trigger: 1|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|45 Azimut: 0|180 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]154511[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = General trigger refreshed, starting LBS = === ============================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]154699[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS locked, disabling update of position outputs = === ===================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]154854[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Validating input values... ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]154881[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Finished validation of input values ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]154900[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Checking if facade is in sun... ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]154922[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Virtual depth and height of sun position in 90° to the facade: 0.99254615164132, 1, effective Elevation: 45.214334839661[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]154943[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == true, updating A1 with value 1 even if same values than previous ones[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]155379[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == true, updating A8 with value 1 even if same values than previous ones[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]155721[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Finished facade check, real azimut 180° and facade at 173° -> IN SUN (from 83° to 263°), effective elevation 45.214334839661° for given elevation of 45° -> in min-max-range (0-90) ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]155749[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Storing current shutter state -5 and updating output if necessary[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]156018[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == true, updating A7 with value -5 even if same values than previous ones[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]156438[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Calculating shutter state... ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]156672[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Handling current shutter state DAWN_FULL_CLOSED (-5)[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]156708[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Recalculating shutter position out of state DAWN_FULL_CLOSED[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]156730[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]positionShutter(...), Value for height: 100%[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]157063[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]LBS locked, not updating outputs[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]157442[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Timer already finished[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]157988[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]positionShutter(...) for height 100% finished[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]158020[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Storing current shutter state -5 and updating output if necessary[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]158273[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == true, updating A7 with value -5 even if same values than previous ones[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]158901[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS finished = === ===============================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]158926[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]158945[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]287285[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]======================================================================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]287318[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS was triggered (v0.6) = === ==========================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]287339[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]<Input>: <Refreshed>|<Value>[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]287427[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Trigger: 0|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|45 Azimut: 1|328.523028065 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]287453[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = Azimut refreshed, starting LBS = === =====================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]287647[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS locked, disabling update of position outputs = === ===================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]287672[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = Brightness, Elevation or Azimut changed = === ====================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]287821[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Validating input values... ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]287847[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Finished validation of input values ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]287880[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Checking if facade is in sun... ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]287904[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Virtual depth and height of sun position in 90° to the facade: -0.91012786904087, 1, effective Elevation: -47.693798254038[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]288263[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == false, previous A1: 1, updating with 0[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]288886[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == false, previous value of A8 equals new value 0, skipping update[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]288911[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Finished facade check, real azimut 328.523028065° and facade at 173° -> NOT IN SUN (shadow side, at sun from 83° to 263°), effective elevation -47.693798254038° for given elevation of 45° -> NOT in min-max-range (0-90) ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]288932[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Storing current shutter state -5 and updating output if necessary[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]289309[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == false, previous value of A7 equals new value -5, skipping update[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]289333[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Calculating shutter state... ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]289482[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Handling current shutter state DAWN_FULL_CLOSED (-5)[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]289505[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Recalculating shutter position out of state DAWN_FULL_CLOSED[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]289524[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]positionShutter(...), Value for height: 100%[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]289794[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]LBS locked, not updating outputs[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]290230[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Timer already finished[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]290705[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]positionShutter(...) for height 100% finished[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]290735[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Storing current shutter state -5 and updating output if necessary[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]291225[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == false, previous value of A7 equals new value -5, skipping update[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]291527[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS finished = === ===============================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]291553[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]291573[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]372293[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]======================================================================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]372329[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS was triggered (v0.6) = === ==========================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]372351[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]<Input>: <Refreshed>|<Value>[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]372404[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Trigger: 0|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 1|-59.679813258606 Azimut: 0|328.523028065 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]372431[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = Elevation refreshed, starting LBS = === ==================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]372662[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS locked, disabling update of position outputs = === ===================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]372689[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = Brightness, Elevation or Azimut changed = === ====================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]372843[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Validating input values... ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]372869[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Finished validation of input values ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]372889[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Checking if facade is in sun... ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]372911[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Virtual depth and height of sun position in 90° to the facade: -0.91012786904087, -1.7099116162568, effective Elevation: 61.97514379532[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]373044[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == false, previous value of A1 equals new value 0, skipping update[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]373285[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == false, previous value of A8 equals new value 1, skipping update[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]373308[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Finished facade check, real azimut 328.523028065° and facade at 173° -> NOT IN SUN (shadow side, at sun from 83° to 263°), effective elevation 61.97514379532° for given elevation of -59.679813258606° -> in min-max-range (0-90) ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]373328[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Storing current shutter state -5 and updating output if necessary[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]373739[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == false, previous value of A7 equals new value -5, skipping update[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]373765[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]=== Calculating shutter state... ===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]373918[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Handling current shutter state DAWN_FULL_CLOSED (-5)[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]373941[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Recalculating shutter position out of state DAWN_FULL_CLOSED[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]373970[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]positionShutter(...), Value for height: 100%[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]374308[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]LBS locked, not updating outputs[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]374728[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Timer already finished[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]375224[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]positionShutter(...) for height 100% finished[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]375247[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Storing current shutter state -5 and updating output if necessary[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]375669[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]UpdateAlways == false, previous value of A7 equals new value -5, skipping update[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]375998[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS finished = === ===============================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]376025[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]376045[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]445054[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]======================================================================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]445086[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = LBS was triggered (v0.6) = === ==========================================[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]445107[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]<Input>: <Refreshed>|<Value>[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]445159[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]Trigger: 0|1 Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0| Elevation: 0|-59.679813258606 Azimut: 0|328.523028065 Lockstate: 0|0 Lockstate with position: 0|0 Internal timer: 0[/TD]
  [/TR]
  [TR]
  [TD]2024-01-09 23:15:00[/TD]
  [TD]445213[/TD]
  [TD]877682[/TD]
  [TD]INFO:[/TD]
  [TD]===== === = Nothing refreshed, nothing to do = === ===================================[/TD]
  [/TR]
  [/TABLE]

Noch ein Beispiel angehängt..

4444.jpg
Erst wenn ich nochmal eine 0 auf E11 schicke, arbeitet der Baustein und fährt in diesem Beispiel ganz zu (vorher 81,96%)

Zuletzt geändert von Evolution100; 09.01.2024, 23:26.

Einen Kommentar schreiben:

Vorherige 1 2 3 4 5 12 21 template Weiter

Ankündigung

LBS 19000707 - Beschattungssteuerung-Rollo

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben: