Ankündigung

Einklappen
Keine Ankündigung bisher.

LBS 19000145 - Beschattungssteuerung-NG

Einklappen
X
Einklappen
 
  • Seite von 95
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
Vorherige 1 39 46 47 48 49 50 51 52 59 95 template Weiter
  • hartwigm
    antwortet
    Hallo Yves,

    ich habe mit der tief stehenden Sonne bei der Beschattung nun auch ein Problem?

    Auf E7 kommt 17° an

    E23: min Elevation steht auf 6
    E24: max. Elevation steht auf 20

    Azimut passt, denn Ausgang A1 geht auf 1

    nun wird der Debug die folgende mir unverständliche Meldung raus:
    Real azimut 221� and facade at 291� -> IN SUN (from 219� to 291�), effective elevation 43.531248601969� for given elevation of 18� -> NOT in min-max-range (6-20)

    Wenn ich die Range verändere und E24 auf 50 setze geht die Beschattung.

    Hier wird in der Bewertung die Elevation Range x 2,55 gerechnet!

    Das macht aber m.E. hier keine Sinn, oder ich verstehe es nicht?

    ​​​​​​​

    Einen Kommentar schreiben:

  • starwarsfan
    antwortet
    Hi Stefan,

    nein, hatte ich leider nicht. Irgendwie bemerkt man schon, dass sich das Jahresende nähert. Auf einmal muss dies und jenes unbedingt noch erledigt werden, Server sterben ohne Vorankündigung und wollen ersetzt werden etc. pp. Bin also gerade anderweitig ziemlich stark unterwegs. Aber keine Sorge, wird schon werden...

    Einen Kommentar schreiben:

  • g0bi
    antwortet
    Moin Yves,
    hattest du schon Gelegenheit dir das Log mal anzusehen?

    Grüße Stefan

    Einen Kommentar schreiben:

  • g0bi
    antwortet
    Kein Thema, erhohl dich

    Einen Kommentar schreiben:

  • starwarsfan
    antwortet
    Hallo Stefan,

    bin bis Ende Monat im Urlaub. Wird also noch etwas dauern, bis ich mir das anschauen kann...

    Einen Kommentar schreiben:

  • g0bi
    antwortet
    starwarsfan
    Ich bitte nochmal gnädig um deine Hilfe, damit ich das endlich mal zum Laufen bekomme.

    Folgendes Phänomen: Ich habe deinen Baustein mit meinen Fensterkontakten verbunden. Wenn Status Fenster offen, sperr ich den Baustein, damit die Jalousie nach oben fährt. Soweit sogut. Wenn sie nach oben fährt und ich mittendrin das Fenster schließe, bewegt sich die Jalousie nicht mehr aber die Lamellen stellen auf Durchsicht. Mach ich wieder auf, fährt die Jalousie weiter nach oben. (Problem 1: Ich hätte gerne dass sich die Jalousie wieder nach unten bewegt, wenn ich wieder schließe)

    Ist die Jalousie oben, also der Vorgang eigentlich abgeschlossen und ich schließe kurz danach das Fenster, bewegt sich die Jalousie kurz ein Stück nach unten bzw. die Lamellen, die Jalousie fährt aber selbst nicht runter. Erst beim dritten Versuch fährt sie endlich nach unten (Problem 2: Timing Problem meinerseits?)

    Und nun nochmal zum ersten Problem. Fährt die Jalousie wieder erfolgreich nach unten, kann ich sie jederzeit mit öffnen des Fensters wieder nach oben fahren lassen, aber eben nicht umgekehrt (Siehe Problem 1)

    Anbei ein Log mit der Hoffnung auf Hilfe

    Code:
     [TABLE="border: 0, cellpadding: 0, cellspacing: 0"]
[TR]
[TD="colspan: 5"]{EDOMI,CUSTOMLOG_Beschattungssteuerung-NG_LBS19000145_399.htm,21.09.2017,20:18:46,230104,12740}[/TD]
 		[/TR]
[TR]
[TD]Zeitstempel[/TD]
 			[TD]ms[/TD]
 			[TD]PID[/TD]
 			[TD]LogLevel[/TD]
 			[TD]Meldung[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]230061[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = Unlocked, starting LBS with short timers (v3.10) = === ============[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]230253[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS was triggered = === ==========================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]230304[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]<Input>: <Refreshed>|<Value>[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]230418[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Trigger: 1| Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0|0 Elevation: 0|-8.6799449920654 Azimut: 0|280.38619995117 Activationstate: 0|1 Lockstate: 1|0 Internal timer: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]230689[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Virtual depth and height of sun position in 90� to the facade: -0.79214266307562, -0.15266330017244, effective Elevation: 10.908415532551[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]230765[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A1 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]231156[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Real azimut 280.38619995117� and facade at 138� -> NOT IN SUN (shadow side, at sun from 48� to 228�), effective elevation 10.908415532551� for given elevation of -8.6799449920654� -> in min-max-range (0-90)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]231225[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]231395[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A10 with value -5 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]231961[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Handling current shutter state DAWN_FULL_CLOSED (-5)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]232036[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Recalculating shutter position out of state DAWN_FULL_CLOSED[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]232081[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 100%/100%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]232187[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A2 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]232815[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A3 with value 100 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]233186[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A5 with value 255 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]234093[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A4 with value 100 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]234468[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A6 with value 255 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]234996[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 100% = 90�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]235068[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A7 with value 90 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]235902[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]236397[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]236584[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A10 with value -5 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:46[/TD]
 			[TD]237035[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS finished = === ===============================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:47[/TD]
 			[TD]263350[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS set to locked, using lock position (v3.10) = === ==============[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:47[/TD]
 			[TD]263433[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 0%/0%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:47[/TD]
 			[TD]263830[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A2 equals new value 0, skipping update of A2[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:47[/TD]
 			[TD]264398[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A3 with value 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:47[/TD]
 			[TD]264945[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A5 with value 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:47[/TD]
 			[TD]265860[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Height change detected, angle will be updated as well. Previous value of updateAlways var: [/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:47[/TD]
 			[TD]265942[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A4 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:47[/TD]
 			[TD]266310[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A6 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:47[/TD]
 			[TD]267077[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 0% = 0�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:47[/TD]
 			[TD]267155[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A7 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:18:47[/TD]
 			[TD]268039[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:01[/TD]
 			[TD]892231[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS is locked, doing nothing (v3.10) = === ===============================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:01[/TD]
 			[TD]915030[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS is locked, doing nothing (v3.10) = === ===============================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]127876[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = Unlocked, starting LBS with short timers (v3.10) = === ============[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]127980[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS was triggered = === ==========================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]128030[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]<Input>: <Refreshed>|<Value>[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]128221[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Trigger: 1| Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0|0 Elevation: 0|-9.1743288040161 Azimut: 0|280.95751953125 Activationstate: 0|1 Lockstate: 1|0 Internal timer: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]128499[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Virtual depth and height of sun position in 90� to the facade: -0.79818909044907, -0.16150489114937, effective Elevation: 11.43874223366[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]128576[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A1 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]128957[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Real azimut 280.95751953125� and facade at 138� -> NOT IN SUN (shadow side, at sun from 48� to 228�), effective elevation 11.43874223366� for given elevation of -9.1743288040161� -> in min-max-range (0-90)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]129024[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]129195[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A10 with value -5 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]129772[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Handling current shutter state DAWN_FULL_CLOSED (-5)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]129846[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Recalculating shutter position out of state DAWN_FULL_CLOSED[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]129893[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 100%/100%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]130000[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A2 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]130628[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A3 with value 100 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]131321[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A5 with value 255 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]132366[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Height change detected, angle will be updated as well. Previous value of updateAlways var: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]132441[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A4 with value 100 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]132817[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A6 with value 255 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]133368[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 100% = 90�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]133440[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A7 with value 90 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]134296[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]134778[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]135118[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A10 equals new value -5, skipping update of A10[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:15[/TD]
 			[TD]135309[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS finished = === ===============================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:23[/TD]
 			[TD]932018[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS set to locked, using lock position (v3.10) = === ==============[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:23[/TD]
 			[TD]932105[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 0%/0%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:23[/TD]
 			[TD]932523[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A2 equals new value 0, skipping update of A2[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:23[/TD]
 			[TD]933001[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A3 with value 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:23[/TD]
 			[TD]933562[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A5 with value 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:23[/TD]
 			[TD]934477[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Height change detected, angle will be updated as well. Previous value of updateAlways var: [/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:23[/TD]
 			[TD]934552[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A4 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:23[/TD]
 			[TD]934922[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A6 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:23[/TD]
 			[TD]935465[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 0% = 0�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:23[/TD]
 			[TD]935535[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A7 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:19:23[/TD]
 			[TD]936404[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]267090[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = Unlocked, starting LBS with short timers (v3.10) = === ============[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]267195[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS was triggered = === ==========================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]267256[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]<Input>: <Refreshed>|<Value>[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]267446[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Trigger: 1| Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0|0 Elevation: 0|-9.1743288040161 Azimut: 0|280.95751953125 Activationstate: 0|1 Lockstate: 1|0 Internal timer: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]267724[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Virtual depth and height of sun position in 90� to the facade: -0.79818909044907, -0.16150489114937, effective Elevation: 11.43874223366[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]267802[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A1 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]268188[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Real azimut 280.95751953125� and facade at 138� -> NOT IN SUN (shadow side, at sun from 48� to 228�), effective elevation 11.43874223366� for given elevation of -9.1743288040161� -> in min-max-range (0-90)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]268259[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]268429[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A10 with value -5 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]269005[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Handling current shutter state DAWN_FULL_CLOSED (-5)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]269076[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Recalculating shutter position out of state DAWN_FULL_CLOSED[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]269128[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 100%/100%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]269236[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A2 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]269855[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A3 with value 100 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]270314[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A5 with value 255 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]271353[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Height change detected, angle will be updated as well. Previous value of updateAlways var: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]271428[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A4 with value 100 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]271804[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A6 with value 255 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]272355[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 100% = 90�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]272427[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A7 with value 90 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]273294[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]273785[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]274133[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A10 equals new value -5, skipping update of A10[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:07[/TD]
 			[TD]274323[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS finished = === ===============================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:16[/TD]
 			[TD]278531[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS set to locked, using lock position (v3.10) = === ==============[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:16[/TD]
 			[TD]278615[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 0%/0%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:16[/TD]
 			[TD]279026[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A2 equals new value 0, skipping update of A2[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:16[/TD]
 			[TD]279489[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A3 with value 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:16[/TD]
 			[TD]280038[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A5 with value 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:16[/TD]
 			[TD]280956[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Height change detected, angle will be updated as well. Previous value of updateAlways var: [/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:16[/TD]
 			[TD]281029[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A4 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:16[/TD]
 			[TD]281409[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A6 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:16[/TD]
 			[TD]281944[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 0% = 0�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:16[/TD]
 			[TD]282013[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A7 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:16[/TD]
 			[TD]282871[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]855633[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = Unlocked, starting LBS with short timers (v3.10) = === ============[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]855730[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS was triggered = === ==========================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]855777[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]<Input>: <Refreshed>|<Value>[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]855964[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Trigger: 1| Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0|0 Elevation: 0|-9.1743288040161 Azimut: 0|280.95751953125 Activationstate: 0|1 Lockstate: 1|0 Internal timer: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]856247[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Virtual depth and height of sun position in 90� to the facade: -0.79818909044907, -0.16150489114937, effective Elevation: 11.43874223366[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]856326[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A1 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]856698[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Real azimut 280.95751953125� and facade at 138� -> NOT IN SUN (shadow side, at sun from 48� to 228�), effective elevation 11.43874223366� for given elevation of -9.1743288040161� -> in min-max-range (0-90)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]856765[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]856936[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A10 with value -5 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]857500[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Handling current shutter state DAWN_FULL_CLOSED (-5)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]857570[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Recalculating shutter position out of state DAWN_FULL_CLOSED[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]857616[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 100%/100%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]857722[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A2 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]858352[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A3 with value 100 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]858751[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A5 with value 255 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]859786[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Height change detected, angle will be updated as well. Previous value of updateAlways var: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]859882[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A4 with value 100 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]860266[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A6 with value 255 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]860800[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 100% = 90�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]860869[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A7 with value 90 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]861728[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]862235[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]862580[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A10 equals new value -5, skipping update of A10[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:24[/TD]
 			[TD]862762[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS finished = === ===============================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:33[/TD]
 			[TD]459878[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS set to locked, using lock position (v3.10) = === ==============[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:33[/TD]
 			[TD]459961[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 0%/0%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:33[/TD]
 			[TD]460370[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A2 equals new value 0, skipping update of A2[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:33[/TD]
 			[TD]460815[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A3 with value 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:33[/TD]
 			[TD]461368[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A5 with value 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:33[/TD]
 			[TD]462287[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Height change detected, angle will be updated as well. Previous value of updateAlways var: [/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:33[/TD]
 			[TD]462363[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A4 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:33[/TD]
 			[TD]462727[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A6 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:33[/TD]
 			[TD]463274[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 0% = 0�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:33[/TD]
 			[TD]463346[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A7 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:33[/TD]
 			[TD]464215[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:42[/TD]
 			[TD]538247[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS is locked, doing nothing (v3.10) = === ===============================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:42[/TD]
 			[TD]541991[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS is locked, doing nothing (v3.10) = === ===============================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]464745[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = Unlocked, starting LBS with short timers (v3.10) = === ============[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]464843[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS was triggered = === ==========================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]464893[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]<Input>: <Refreshed>|<Value>[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]465078[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Trigger: 1| Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0|0 Elevation: 0|-9.1743288040161 Azimut: 0|280.95751953125 Activationstate: 0|1 Lockstate: 1|0 Internal timer: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]465368[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Virtual depth and height of sun position in 90� to the facade: -0.79818909044907, -0.16150489114937, effective Elevation: 11.43874223366[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]465445[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A1 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]465837[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Real azimut 280.95751953125� and facade at 138� -> NOT IN SUN (shadow side, at sun from 48� to 228�), effective elevation 11.43874223366� for given elevation of -9.1743288040161� -> in min-max-range (0-90)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]465905[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]466078[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A10 with value -5 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]466658[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Handling current shutter state DAWN_FULL_CLOSED (-5)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]466727[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Recalculating shutter position out of state DAWN_FULL_CLOSED[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]466773[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 100%/100%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]466881[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A2 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]467520[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A3 with value 100 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]467921[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A5 with value 255 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]468961[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Height change detected, angle will be updated as well. Previous value of updateAlways var: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]469034[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A4 with value 100 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]469424[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A6 with value 255 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]469966[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 100% = 90�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]470035[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A7 with value 90 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]470897[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]471429[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]471766[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A10 equals new value -5, skipping update of A10[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:20:44[/TD]
 			[TD]471957[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS finished = === ===============================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:04[/TD]
 			[TD]048367[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS set to locked, using lock position (v3.10) = === ==============[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:04[/TD]
 			[TD]048465[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 0%/0%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:04[/TD]
 			[TD]048876[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A2 equals new value 0, skipping update of A2[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:04[/TD]
 			[TD]049412[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A3 with value 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:04[/TD]
 			[TD]049962[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A5 with value 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:04[/TD]
 			[TD]050874[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Height change detected, angle will be updated as well. Previous value of updateAlways var: [/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:04[/TD]
 			[TD]050952[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A4 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:04[/TD]
 			[TD]051323[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A6 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:04[/TD]
 			[TD]051872[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 0% = 0�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:04[/TD]
 			[TD]051944[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A7 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:04[/TD]
 			[TD]052818[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:04[/TD]
 			[TD]365287[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS is locked, doing nothing (v3.10) = === ===============================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:04[/TD]
 			[TD]369128[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS is locked, doing nothing (v3.10) = === ===============================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:05[/TD]
 			[TD]982866[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS is locked, doing nothing (v3.10) = === ===============================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:05[/TD]
 			[TD]986895[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS is locked, doing nothing (v3.10) = === ===============================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]838720[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = Unlocked, starting LBS with short timers (v3.10) = === ============[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]838818[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS was triggered = === ==========================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]838867[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]<Input>: <Refreshed>|<Value>[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]839055[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Trigger: 1| Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0|0 Elevation: 0|-9.1743288040161 Azimut: 0|280.95751953125 Activationstate: 0|1 Lockstate: 1|0 Internal timer: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]839344[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Virtual depth and height of sun position in 90� to the facade: -0.79818909044907, -0.16150489114937, effective Elevation: 11.43874223366[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]839422[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A1 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]839802[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Real azimut 280.95751953125� and facade at 138� -> NOT IN SUN (shadow side, at sun from 48� to 228�), effective elevation 11.43874223366� for given elevation of -9.1743288040161� -> in min-max-range (0-90)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]839870[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]840043[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A10 with value -5 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]840614[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Handling current shutter state DAWN_FULL_CLOSED (-5)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]840684[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Recalculating shutter position out of state DAWN_FULL_CLOSED[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]840732[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 100%/100%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]840837[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A2 with value 0 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]841471[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A3 with value 100 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]841864[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A5 with value 255 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]842911[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Height change detected, angle will be updated as well. Previous value of updateAlways var: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]842988[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A4 with value 100 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]843384[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A6 with value 255 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]843925[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 100% = 90�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]843997[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Updating A7 with value 90 even if same values than previous ones[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]844844[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]845345[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]845683[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A10 equals new value -5, skipping update of A10[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:11[/TD]
 			[TD]845865[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS finished = === ===============================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]845606[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = Brightness, Elevation or Azimut changed and LBS is active, starting it (v3.10) = ===[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]845695[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS was triggered = === ==========================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]845745[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]<Input>: <Refreshed>|<Value>[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]845936[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Trigger: 0| Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0|0 Elevation: 0|-9.1743288040161 Azimut: 1|281.33905029297 Activationstate: 0|1 Lockstate: 0|0 Internal timer: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]846200[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Virtual depth and height of sun position in 90� to the facade: -0.80218277310823, -0.16150489114937, effective Elevation: 11.383284580156[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]846474[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A1 equals new value 0, skipping update of A1[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]846544[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Real azimut 281.33905029297� and facade at 138� -> NOT IN SUN (shadow side, at sun from 48� to 228�), effective elevation 11.383284580156� for given elevation of -9.1743288040161� -> in min-max-range (0-90)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]846595[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]846976[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A10 equals new value -5, skipping update of A10[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]847213[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Handling current shutter state DAWN_FULL_CLOSED (-5)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]847280[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Recalculating shutter position out of state DAWN_FULL_CLOSED[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]847326[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 100%/100%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]847593[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A2 equals new value 0, skipping update of A2[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]847973[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A3 equals new value 100, skipping update of A3[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]848201[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A5 equals new value 255, skipping update of A5[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]848766[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A4 equals new value 100, skipping update of A4[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]848992[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A6 equals new value 255, skipping update of A6[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]849066[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 100% = 90�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]849268[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A7 equals new value 90, skipping update of A7[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]849827[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]850327[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]850569[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A10 equals new value -5, skipping update of A10[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]850752[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS finished = === ===============================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]975177[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = Brightness, Elevation or Azimut changed and LBS is active, starting it (v3.10) = ===[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]975271[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS was triggered = === ==========================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]975317[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]<Input>: <Refreshed>|<Value>[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]975421[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Trigger: 0| Trigger changed output: 0| Brightness: 0|0 Brightness dawn: 0|0 Elevation: 1|-9.5032453536987 Azimut: 0|281.33905029297 Activationstate: 0|1 Lockstate: 0|0 Internal timer: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]975569[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Virtual depth and height of sun position in 90� to the facade: -0.80218277310823, -0.16740083792087, effective Elevation: 11.787415420239[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]975694[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A1 equals new value 0, skipping update of A1[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]975760[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Real azimut 281.33905029297� and facade at 138� -> NOT IN SUN (shadow side, at sun from 48� to 228�), effective elevation 11.787415420239� for given elevation of -9.5032453536987� -> in min-max-range (0-90)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]975809[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]976047[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A10 equals new value -5, skipping update of A10[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]976175[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Handling current shutter state DAWN_FULL_CLOSED (-5)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]976231[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Recalculating shutter position out of state DAWN_FULL_CLOSED[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]976273[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 100%/100%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]976421[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A2 equals new value 0, skipping update of A2[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]976578[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A3 equals new value 100, skipping update of A3[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]976692[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A5 equals new value 255, skipping update of A5[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]977065[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A4 equals new value 100, skipping update of A4[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]977188[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A6 equals new value 255, skipping update of A6[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]977243[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 100% = 90�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]977341[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A7 equals new value 90, skipping update of A7[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]977812[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]978307[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]978547[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A10 equals new value -5, skipping update of A10[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]978724[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS finished = === ===============================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]995517[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = Brightness, Elevation or Azimut changed and LBS is active, starting it (v3.10) = ===[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]995601[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS was triggered = === ==========================================[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]995647[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]<Input>: <Refreshed>|<Value>[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]995750[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Trigger: 0| Trigger changed output: 0| Brightness: 1|0 Brightness dawn: 1|0 Elevation: 0|-9.5032453536987 Azimut: 0|281.33905029297 Activationstate: 0|1 Lockstate: 0|0 Internal timer: 0[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]995898[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Virtual depth and height of sun position in 90� to the facade: -0.80218277310823, -0.16740083792087, effective Elevation: 11.787415420239[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]996031[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A1 equals new value 0, skipping update of A1[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]996093[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Real azimut 281.33905029297� and facade at 138� -> NOT IN SUN (shadow side, at sun from 48� to 228�), effective elevation 11.787415420239� for given elevation of -9.5032453536987� -> in min-max-range (0-90)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]996139[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]996370[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A10 equals new value -5, skipping update of A10[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]996498[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Handling current shutter state DAWN_FULL_CLOSED (-5)[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]996553[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Recalculating shutter position out of state DAWN_FULL_CLOSED[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]996597[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Values to write to outputs for height and angle: 100%/100%[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]996742[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A2 equals new value 0, skipping update of A2[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]996900[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A3 equals new value 100, skipping update of A3[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]997019[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A5 equals new value 255, skipping update of A5[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]997380[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A4 equals new value 100, skipping update of A4[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]997500[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A6 equals new value 255, skipping update of A6[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]997558[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Shutter angle 100% = 90�[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]997654[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A7 equals new value 90, skipping update of A7[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]998121[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Timer already finished[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]998610[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Storing current shutter state -5 and updating output if necessary[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]998866[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]Previous value of A10 equals new value -5, skipping update of A10[/TD]
 		[/TR]
[TR]
[TD]2017-09-21 20:21:49[/TD]
 			[TD]999048[/TD]
 			[TD]12740[/TD]
 			[TD]INFO: [/TD]
 			[TD]===== === = LBS finished = === ===============================================[/TD]
 		[/TR]
[/TABLE]

    Nun zum Problem 3, welches ich einfach mal erwähnen möchte, jedoch kein Log habe.

    Wir hatten eines Morgens Windalarm an den Jalousien (JAL Aktor fährt Jalousien nach oben und sperrt bis Wind wieder weniger)
    Das ganze war während die Jalousien noch im Dämmerungsmodus waren (geschlossen durch deinen LBS) Während es hell wurde, hat irgendwann um 10 Uhr der Wind nachgelassen und der JAL Aktor hat die Jalousien auf die letzte Position bewegt von der er sie geholt hatte (Also geschlossen, da Dämmerungsmodus) Da es kein Mega sonniger Tag war, haben sich die Jalousien stundenlang anschließend nicht bewegt, wohl weil dein LBS die Position nicht als Rückmeldung hatte, ist das möglich? Sollte doch, wenn ich die aktuelle Position rückmelde und die Toleranz jeweils auf 100 setze das nächste Mal funktionieren?

    Danke und Grüße

    Stefan

    Einen Kommentar schreiben:

  • ak68
    antwortet
    Zitat von rene.z Beitrag anzeigen

    ... das ist derzeit so - korrekt.

    Aber genau darum geht es bzw. will Yves eben dieses Verhalten so ändern, dass A10 auch bei gesperrtem Baustein weiter berechnet und ausgegeben, aber der Behang nicht angesteuert wird.
    o.K., wenn bei Deaktivierung/ Sperre nur die Ausgabe von Position und Lamellenstellung verhindert werden soll, aber z.B. A10 weiterhin aktiv bleiben und Änderungen sendet, wäre das perfekt- habe ich zunächst anders verstanden !

    Einen Kommentar schreiben:

  • starwarsfan
    antwortet
    Hallo miteinander

    Zitat von rene.z Beitrag anzeigen
    Aber genau darum geht es bzw. will Yves eben dieses Verhalten so ändern, dass A10 auch bei gesperrtem Baustein weiter berechnet und ausgegeben, aber der Behang nicht angesteuert wird.
    Danke für die nochmalige Klarstellung. Genau so ist es.

    Einen Kommentar schreiben:

  • rene.z
    antwortet
    Zitat von ak68 Beitrag anzeigen

    ... aber A10 wird bei DEaktiviertem Baustein (zumindest bei MIR) nicht ausgegeben- auch nicht bei Änderung.
    ... das ist derzeit so - korrekt.

    Aber genau darum geht es bzw. will Yves eben dieses Verhalten so ändern, dass A10 auch bei gesperrtem Baustein weiter berechnet und ausgegeben, aber der Behang nicht angesteuert wird.

    Einen Kommentar schreiben:

  • ak68
    antwortet
    Zitat von starwarsfan Beitrag anzeigen
    Hi



    Ja und? Wo liegt nun das Problem? Genau das hab ich doch geschrieben!?
    ... aber A10 wird bei DEaktiviertem Baustein (zumindest bei MIR) nicht ausgegeben- auch nicht bei Änderung.

    Einen Kommentar schreiben:

  • starwarsfan
    antwortet
    Hi

    Zitat von ak68 Beitrag anzeigen
    Aber bei meiner Konstellation würde ich genau dann (nämlich bei Deaktivierung) auch den Status auf A10 benötigen, um bei der nächsten Status-Änderung den (deaktivierten) Baustein wieder zu aktivieren.
    Ja und? Wo liegt nun das Problem? Genau das hab ich doch geschrieben!?

    Einen Kommentar schreiben:

  • ak68
    antwortet
    Zitat von starwarsfan Beitrag anzeigen
    Moin



    Das wird auf jeden Fall so sein, da der Baustein sonst ja nicht weiterrechnen kann. Das heisst, der Baustein wird bei entsprechendem Trigger immer rechnen, die Positionsausgänge des Behangs jedoch nur dann aktualisieren, wenn er nicht gesperrt oder deaktiviert ist. Zumindest wenn es technisch so funktioniert, wie ich es mir im Moment vorstelle...
    Aber bei meiner Konstellation würde ich genau dann (nämlich bei Deaktivierung) auch den Status auf A10 benötigen, um bei der nächsten Status-Änderung den (deaktivierten) Baustein wieder zu aktivieren. Eine Aktivierung über ZSU oder Zeitsteuerung halte ich nicht für sinnvoll

    Beispiel: Jalousienbehang wird manuell oder über Wetterstation (Wind/ Frost etc.) hochgefahren (ist dann Deaktiv !), soll aber bei der nächsten Statusänderung (z.B. Dämmerungsbeginn) wieder aktiviert werden und dann wieder im Automatikmodus "weiterfahren"- ich hoffe, ich habe dies verständlich erklärt !

    Danke
    Andreas

    Einen Kommentar schreiben:

  • starwarsfan
    antwortet
    Moin

    Zitat von ak68 Beitrag anzeigen
    in diesem Zusammenhang wäre aus meiner Sicht auch zu überlegen, ob der LBS trotz Sperre, den A10 (Status) trotzdem ausgeben sollte.
    Das wird auf jeden Fall so sein, da der Baustein sonst ja nicht weiterrechnen kann. Das heisst, der Baustein wird bei entsprechendem Trigger immer rechnen, die Positionsausgänge des Behangs jedoch nur dann aktualisieren, wenn er nicht gesperrt oder deaktiviert ist. Zumindest wenn es technisch so funktioniert, wie ich es mir im Moment vorstelle...

    Einen Kommentar schreiben:

  • ak68
    antwortet
    Zitat von starwarsfan Beitrag anzeigen
    Hallo miteinander



    Ich gehe gerade einer Idee nach, wie ich den Baustein basierend auf der momentanen Implementierung so umbauen kann, dass er auch bei Deaktivierung oder Sperre weiter wie gehabt rechnet und lediglich das Update der Ausgänge verhindert wird. Wenn das so funktioniert wie ich es mir im Moment vorstelle, dann sollte es möglich sein, dass nach Reaktivierung sofort der aktuell gültige Status vorhanden ist und unnötiges Auf-/Zu- bzw. Zu-/Auf-fahren vermieden wird.
    Hallo Yves,

    in diesem Zusammenhang wäre aus meiner Sicht auch zu überlegen, ob der LBS trotz Sperre, den A10 (Status) trotzdem ausgeben sollte.

    Ich verwende z.B. die Statusändung, um nach manueller Fahrt wieder in den Automatikmodus zu gehen (z.B. bei Dämmerung). Dies mache ich zur Zeit mit einem zweiten Baustein, der immer aktiv ist.


    Danke für Deine Bemühungen
    Andreas

    Einen Kommentar schreiben:

  • rene.z
    antwortet
    Zitat von starwarsfan Beitrag anzeigen
    Hallo miteinander



    Ich gehe gerade einer Idee nach, wie ich den Baustein basierend auf der momentanen Implementierung so umbauen kann, dass er auch bei Deaktivierung oder Sperre weiter wie gehabt rechnet und lediglich das Update der Ausgänge verhindert wird. Wenn das so funktioniert wie ich es mir im Moment vorstelle, dann sollte es möglich sein, dass nach Reaktivierung sofort der aktuell gültige Status vorhanden ist und unnötiges Auf-/Zu- bzw. Zu-/Auf-fahren vermieden wird.
    Das klingt doch hervorragend

    Einen Kommentar schreiben:

Vorherige 1 39 46 47 48 49 50 51 52 59 95 template Weiter
Lädt...
X

Wir verarbeiten personenbezogene Daten über die Nutzer unserer Website mithilfe von Cookies und anderen Technologien, um unsere Dienste bereitzustellen. Weitere Informationen findest Du in unserer Datenschutzerklärung.

Indem Du unten auf "ICH stimme zu" klickst, stimmst Du unserer Datenschutzerklärung und unseren persönlichen Datenverarbeitungs- und Cookie-Praktiken zu, wie darin beschrieben. Du erkennst außerdem an, dass dieses Forum möglicherweise außerhalb Deines Landes gehostet wird und bist damit einverstanden, dass Deine Daten in dem Land, in dem dieses Forum gehostet wird, gesammelt, gespeichert und verarbeitet werden.

Ich stimme zu