Hallo,
Ich versuche gerade das aktuelle knxd stable v14 zu bauen, allerdings schlägt es immer an der selben stelle fehl.
Hab es testweise auch mit dem Master Branch probiert, da kommt die gleiche Fehlermeldung.
System ist ein Raspberry Pi 3 mit aktuellem Raspbian Stretch.
Fehlt mir hier evtl. noch ein Paket oder was kann den Fehler verursachen.
Finde leider im Internet keine passende Lösung zu der Fehlerausgabe.
Hier die Shell Ausgabe nach "dpkg-buildpackage -b -uc"
(soweit ich im Putty zurückscrollen konnte)
Ich versuche gerade das aktuelle knxd stable v14 zu bauen, allerdings schlägt es immer an der selben stelle fehl.
Hab es testweise auch mit dem Master Branch probiert, da kommt die gleiche Fehlermeldung.
Code:
debian/rules:14: die Regel für Ziel „binary“ scheiterte make: *** [binary] Fehler 2 dpkg-buildpackage: Fehler: Fehler-Exitstatus von fakeroot debian/rules binary war 2
Fehlt mir hier evtl. noch ein Paket oder was kann den Fehler verursachen.
Finde leider im Internet keine passende Lösung zu der Fehlerausgabe.
Hier die Shell Ausgabe nach "dpkg-buildpackage -b -uc"
(soweit ich im Putty zurückscrollen konnte)
Code:
mkdir -p gen
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/opentconnection.c
echo '#include "eibclient-int.h"' > gen/getapdusrc.c
echo '#include "def/'`basename gen/opentconnection.c|sed -e "s/\.c/.inc/g"`'"' >> gen/opentconnection.c
echo '#include "eibclient-int.h"' > gen/mcauthorize.c
echo '#include "def/'`basename gen/getapdusrc.c|sed -e "s/\.c/.inc/g"`'"' >> gen/getapdusrc.c
echo '#include "def/'`basename gen/mcauthorize.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcauthorize.c
echo '#include "eibclient-int.h"' > gen/mcpropertyscan.c
mkdir -p gen
echo '#include "def/'`basename gen/mcpropertyscan.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcpropertyscan.c
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/mprogmodeon.c
mkdir -p gen
mkdir -p gen
echo '#include "def/'`basename gen/mprogmodeon.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mprogmodeon.c
echo '#include "eibclient-int.h"' > gen/opentgroup.c
echo '#include "eibclient-int.h"' > gen/getbusmonitorpacket.c
echo '#include "def/'`basename gen/opentgroup.c|sed -e "s/\.c/.inc/g"`'"' >> gen/opentgroup.c
echo '#include "eibclient-int.h"' > gen/mcconnect.c
echo '#include "def/'`basename gen/getbusmonitorpacket.c|sed -e "s/\.c/.inc/g"`'"' >> gen/getbusmonitorpacket.c
mkdir -p gen
echo '#include "def/'`basename gen/mcconnect.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcconnect.c
echo '#include "eibclient-int.h"' > gen/mcpropertywrite.c
mkdir -p gen
mkdir -p gen
echo '#include "def/'`basename gen/mcpropertywrite.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcpropertywrite.c
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/mprogmodestatus.c
echo '#include "eibclient-int.h"' > gen/opentindividual.c
echo '#include "def/'`basename gen/mprogmodestatus.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mprogmodestatus.c
echo '#include "eibclient-int.h"' > gen/getgroupsrc.c
echo '#include "def/'`basename gen/opentindividual.c|sed -e "s/\.c/.inc/g"`'"' >> gen/opentindividual.c
mkdir -p gen
echo '#include "def/'`basename gen/getgroupsrc.c|sed -e "s/\.c/.inc/g"`'"' >> gen/getgroupsrc.c
echo '#include "eibclient-int.h"' > gen/mcgetmaskversion.c
mkdir -p gen
echo '#include "def/'`basename gen/mcgetmaskversion.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcgetmaskversion.c
mkdir -p gen
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/mcreadadc.c
echo '#include "eibclient-int.h"' > gen/mprogmodetoggle.c
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/openttpdu.c
echo '#include "def/'`basename gen/mcreadadc.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcreadadc.c
echo '#include "def/'`basename gen/mprogmodetoggle.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mprogmodetoggle.c
echo '#include "def/'`basename gen/openttpdu.c|sed -e "s/\.c/.inc/g"`'"' >> gen/openttpdu.c
echo '#include "eibclient-int.h"' > gen/groupcacheclear.c
mkdir -p gen
echo '#include "def/'`basename gen/groupcacheclear.c|sed -e "s/\.c/.inc/g"`'"' >> gen/groupcacheclear.c
mkdir -p gen
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/mcgetpeitype.c
echo '#include "eibclient-int.h"' > gen/mcread.c
echo '#include "eibclient-int.h"' > gen/mreadindividualaddresses.c
echo '#include "def/'`basename gen/mcgetpeitype.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcgetpeitype.c
mkdir -p gen
echo '#include "def/'`basename gen/mcread.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcread.c
echo '#include "def/'`basename gen/mreadindividualaddresses.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mreadindividualaddresses.c
echo '#include "eibclient-int.h"' > gen/openvbusmonitor.c
mkdir -p gen
echo '#include "def/'`basename gen/openvbusmonitor.c|sed -e "s/\.c/.inc/g"`'"' >> gen/openvbusmonitor.c
mkdir -p gen
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/groupcachedisable.c
echo '#include "eibclient-int.h"' > gen/mcrestart.c
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/mcprogmodeoff.c
echo '#include "def/'`basename gen/groupcachedisable.c|sed -e "s/\.c/.inc/g"`'"' >> gen/groupcachedisable.c
echo '#include "def/'`basename gen/mcrestart.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcrestart.c
echo '#include "def/'`basename gen/mcprogmodeoff.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcprogmodeoff.c
echo '#include "eibclient-int.h"' > gen/mwriteindividualaddress.c
mkdir -p gen
echo '#include "def/'`basename gen/mwriteindividualaddress.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mwriteindividualaddress.c
mkdir -p gen
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/openvbusmonitortext.c
echo '#include "def/'`basename gen/openvbusmonitortext.c|sed -e "s/\.c/.inc/g"`'"' >> gen/openvbusmonitortext.c
echo '#include "eibclient-int.h"' > gen/groupcacheenable.c
echo '#include "eibclient-int.h"' > gen/mcprogmodeon.c
mkdir -p gen
echo '#include "def/'`basename gen/mcprogmodeon.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcprogmodeon.c
echo '#include "def/'`basename gen/groupcacheenable.c|sed -e "s/\.c/.inc/g"`'"' >> gen/groupcacheenable.c
echo '#include "eibclient-int.h"' > gen/mcsetkey.c
mkdir -p gen
echo '#include "def/'`basename gen/mcsetkey.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcsetkey.c
mkdir -p gen
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/openbusmonitor.c
echo '#include "eibclient-int.h"' > gen/reset.c
mkdir -p gen
echo '#include "def/'`basename gen/openbusmonitor.c|sed -e "s/\.c/.inc/g"`'"' >> gen/openbusmonitor.c
echo '#include "def/'`basename gen/reset.c|sed -e "s/\.c/.inc/g"`'"' >> gen/reset.c
echo '#include "eibclient-int.h"' > gen/groupcacheread.c
echo '#include "eibclient-int.h"' > gen/mcprogmodestatus.c
echo '#include "def/'`basename gen/groupcacheread.c|sed -e "s/\.c/.inc/g"`'"' >> gen/groupcacheread.c
echo '#include "def/'`basename gen/mcprogmodestatus.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcprogmodestatus.c
mkdir -p gen
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/mcwrite.c
echo '#include "eibclient-int.h"' > gen/openbusmonitortext.c
mkdir -p gen
mkdir -p gen
echo '#include "def/'`basename gen/mcwrite.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcwrite.c
echo '#include "def/'`basename gen/openbusmonitortext.c|sed -e "s/\.c/.inc/g"`'"' >> gen/openbusmonitortext.c
echo '#include "eibclient-int.h"' > gen/sendapdu.c
echo '#include "eibclient-int.h"' > gen/groupcachereadsync.c
mkdir -p gen
echo '#include "def/'`basename gen/sendapdu.c|sed -e "s/\.c/.inc/g"`'"' >> gen/sendapdu.c
mkdir -p gen
echo '#include "def/'`basename gen/groupcachereadsync.c|sed -e "s/\.c/.inc/g"`'"' >> gen/groupcachereadsync.c
echo '#include "eibclient-int.h"' > gen/mcprogmodetoggle.c
echo '#include "eibclient-int.h"' > gen/mcwriteplain.c
echo '#include "def/'`basename gen/mcprogmodetoggle.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcprogmodetoggle.c
echo '#include "def/'`basename gen/mcwriteplain.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcwriteplain.c
mkdir -p gen
mkdir -p gen
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/opengroupsocket.c
echo '#include "eibclient-int.h"' > gen/sendgroup.c
mkdir -p gen
echo '#include "def/'`basename gen/opengroupsocket.c|sed -e "s/\.c/.inc/g"`'"' >> gen/opengroupsocket.c
echo '#include "eibclient-int.h"' > gen/groupcacheremove.c
echo '#include "def/'`basename gen/sendgroup.c|sed -e "s/\.c/.inc/g"`'"' >> gen/sendgroup.c
echo '#include "eibclient-int.h"' > gen/mcpropertydesc.c
echo '#include "def/'`basename gen/groupcacheremove.c|sed -e "s/\.c/.inc/g"`'"' >> gen/groupcacheremove.c
mkdir -p gen
echo '#include "def/'`basename gen/mcpropertydesc.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcpropertydesc.c
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/mgetmaskversion.c
mkdir -p gen
mkdir -p gen
echo '#include "def/'`basename gen/mgetmaskversion.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mgetmaskversion.c
echo '#include "eibclient-int.h"' > gen/opentbroadcast.c
echo '#include "eibclient-int.h"' > gen/gettpdu.c
echo '#include "eibclient-int.h"' > gen/sendtpdu.c
echo '#include "def/'`basename gen/opentbroadcast.c|sed -e "s/\.c/.inc/g"`'"' >> gen/opentbroadcast.c
echo '#include "def/'`basename gen/gettpdu.c|sed -e "s/\.c/.inc/g"`'"' >> gen/gettpdu.c
echo '#include "def/'`basename gen/sendtpdu.c|sed -e "s/\.c/.inc/g"`'"' >> gen/sendtpdu.c
mkdir -p gen
echo '#include "eibclient-int.h"' > gen/mcindividual.c
mkdir -p gen
mkdir -p gen
mkdir -p gen
echo '#include "def/'`basename gen/mcindividual.c|sed -e "s/\.c/.inc/g"`'"' >> gen/mcindividual.c
echo '#include "eibclient-int.h"' > gen/groupcachelastupdates.c
echo '#include "eibclient-int.h"' > gen/openvbusmonitorts.c
echo '#include "eibclient-int.h"' > gen/openbusmonitorts.c
echo '#include "def/'`basename gen/groupcachelastupdates.c|sed -e "s/\.c/.inc/g"`'"' >> gen/groupcachelastupdates.c
echo '#include "def/'`basename gen/openvbusmonitorts.c|sed -e "s/\.c/.inc/g"`'"' >> gen/openvbusmonitorts.c
mkdir -p gen
echo '#include "def/'`basename gen/openbusmonitorts.c|sed -e "s/\.c/.inc/g"`'"' >> gen/openbusmonitorts.c
echo '#include "eibclient-int.h"' > gen/getbusmonitorpacketts.c
echo '#include "def/'`basename gen/getbusmonitorpacketts.c|sed -e "s/\.c/.inc/g"`'"' >> gen/getbusmonitorpacketts.c
make all-am
make[6]: Verzeichnis „/home/pi/knxd/src/client/c“ wird betreten
CC close.lo
CC closesync.lo
CC io.lo
CC complete.lo
CC openremote.lo
CC openlocal.lo
CC openurl.lo
CC pollcomplete.lo
CC pollfd.lo
CC gen/getapdu.lo
CC gen/loadimage.lo
CC gen/mcpropertyread.lo
CC gen/mprogmodeoff.lo
CC gen/opentconnection.lo
CC gen/getapdusrc.lo
CC gen/mcauthorize.lo
CC gen/mcpropertyscan.lo
CC gen/mprogmodeon.lo
CC gen/opentgroup.lo
CC gen/getbusmonitorpacket.lo
CC gen/mcconnect.lo
CC gen/mcpropertywrite.lo
CC gen/mprogmodestatus.lo
CC gen/opentindividual.lo
CC gen/getgroupsrc.lo
CC gen/mcgetmaskversion.lo
CC gen/mcreadadc.lo
CC gen/mprogmodetoggle.lo
CC gen/openttpdu.lo
CC gen/groupcacheclear.lo
CC gen/mcgetpeitype.lo
CC gen/mcread.lo
CC gen/mreadindividualaddresses.lo
CC gen/openvbusmonitor.lo
CC gen/groupcachedisable.lo
CC gen/mcprogmodeoff.lo
CC gen/mcrestart.lo
CC gen/mwriteindividualaddress.lo
CC gen/openvbusmonitortext.lo
CC gen/groupcacheenable.lo
CC gen/mcprogmodeon.lo
CC gen/mcsetkey.lo
CC gen/openbusmonitor.lo
CC gen/reset.lo
CC gen/groupcacheread.lo
CC gen/mcprogmodestatus.lo
CC gen/mcwrite.lo
CC gen/openbusmonitortext.lo
CC gen/sendapdu.lo
CC gen/groupcachereadsync.lo
CC gen/mcprogmodetoggle.lo
CC gen/mcwriteplain.lo
CC gen/opengroupsocket.lo
CC gen/sendgroup.lo
CC gen/groupcacheremove.lo
CC gen/mcpropertydesc.lo
CC gen/mgetmaskversion.lo
CC gen/opentbroadcast.lo
CC gen/sendtpdu.lo
CC gen/gettpdu.lo
CC gen/mcindividual.lo
CC gen/groupcachelastupdates.lo
CC gen/openbusmonitorts.lo
CC gen/openvbusmonitorts.lo
CC gen/getbusmonitorpacketts.lo
CCLD libeibclient.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[6]: Verzeichnis „/home/pi/knxd/src/client/c“ wird verlassen
make[5]: Verzeichnis „/home/pi/knxd/src/client/c“ wird verlassen
Making all in php
make[5]: Verzeichnis „/home/pi/knxd/src/client/php“ wird betreten
sed -ne 's/#define \(IMG_[A-Z_0-9]\+\) \+\([0-9]\+\)/ const \1 = \2;/p' ../../../src/common/eibloadresult.h > result.inc
CXX dummy.o
if gcc -E -I../../../src/include -I../../../src/client -I../../../src/client -D__cplusplus -MT EIBConnection.post -MD -MP -MF ".deps/EIBConnection.Tpo" -P -x c -O0 -o EIBConnection.post EIBConnection.pre; \
then mv -f ".deps/EIBConnection.Tpo" ".deps/EIBConnection.Po"; else rm -f ".deps/EIBConnection.Tpo"; exit 1; fi
cat EIBConnection.post > EIBConnection.php
no EIBConnection.php || /bin/true
/bin/bash: no: Kommando nicht gefunden.
sed -i -e 's/== =/===/g' EIBConnection.php
AR libdummy.a
ar: `u' modifier ignored since `D' is the default (see `U')
sed -i -e 's/= &/=\& /g' EIBConnection.php
cat lic.inc EIBConnection.php end.inc > eibclient.php
make[5]: Verzeichnis „/home/pi/knxd/src/client/php“ wird verlassen
Making all in perl
make[5]: Verzeichnis „/home/pi/knxd/src/client/perl“ wird betreten
sed -ne 's/#define \(IMG_[A-Z_0-9]\+\) \+\([0-9]\+\)/ use constant \1 => \2;/p' ../../../src/common/eibloadresult.h > result.inc
CXX dummy.o
if gcc -E -I../../../src/include -I../../../src/client -I../../../src/client -I. -D__cplusplus -MT EIBConnection.post -MD -MP -MF ".deps/EIBConnection.Tpo" -P -x c -O0 -o EIBConnection.post EIBConnection.pre; \
then mv -f ".deps/EIBConnection.Tpo" ".deps/EIBConnection.Po"; else rm -f ".deps/EIBConnection.Tpo"; exit 1; fi
sed -e 's/ARRAY \?(\([A-Za-z][A-Za-z0-9_]*\))/@\1/g' EIBConnection.post > EIBConnection.p1
perl -MO=Deparse EIBConnection.p1 > EIBConnection.p
AR libdummy.a
ar: `u' modifier ignored since `D' is the default (see `U')
EIBConnection.p1 syntax OK
cat lic.inc EIBConnection.p > EIBConnection.pm
make[5]: Verzeichnis „/home/pi/knxd/src/client/perl“ wird verlassen
Making all in cs
make[5]: Verzeichnis „/home/pi/knxd/src/client/cs“ wird betreten
sed -ne 's/#define \(IMG_[A-Z_0-9]\+\) \+\([0-9]\+\)/public const int \1 = \2;/p' ../../../src/common/eibloadresult.h > result.inc
if gcc -E -I../../../src/include -I../../../src/client -I../../../src/client -D__cplusplus -MT EIBConnection.post -MD -MP -MF ".deps/EIBConnection.Tpo" -P -x c -O0 -o EIBConnection.post EIBConnection.pre; \
then mv -f ".deps/EIBConnection.Tpo" ".deps/EIBConnection.Po"; else rm -f ".deps/EIBConnection.Tpo"; exit 1; fi
cat lic.inc EIBConnection.post > EIBConnection.cs
no EIBConnection.cs || /bin/true
/bin/bash: no: Kommando nicht gefunden.
make all-am
make[6]: Verzeichnis „/home/pi/knxd/src/client/cs“ wird betreten
CXX dummy.o
AR libdummy.a
ar: `u' modifier ignored since `D' is the default (see `U')
make[6]: Verzeichnis „/home/pi/knxd/src/client/cs“ wird verlassen
make[5]: Verzeichnis „/home/pi/knxd/src/client/cs“ wird verlassen
Making all in python
make[5]: Verzeichnis „/home/pi/knxd/src/client/python“ wird betreten
sed -ne 's/#define \(IMG_[A-Z_0-9]\+\) \+\([0-9]\+\)/\1 = \2/p' ../../../src/common/eibloadresult.h > result.inc
CC gen.o
CCLD gen
./gen > gen.inc
cat io.inc gen.inc result.inc > EIBConnection.py
make[5]: Verzeichnis „/home/pi/knxd/src/client/python“ wird verlassen
Making all in pascal
make[5]: Verzeichnis „/home/pi/knxd/src/client/pascal“ wird betreten
sed -ne 's/#define \(IMG_[A-Z_0-9]\+\) \+\([0-9]\+\)/Const \1 = \2;\n/p' ../../../src/common/eibloadresult.h > result.inc
CC genh.o
CC gen.o
CCLD genh
./genh > genh.inc
CCLD gen
./gen > gen.inc
cat header1.inc result.inc header2.inc genh.inc body1.inc gen.inc body2.inc > EIBD.pas
make[5]: Verzeichnis „/home/pi/knxd/src/client/pascal“ wird verlassen
Making all in ruby
make[5]: Verzeichnis „/home/pi/knxd/src/client/ruby“ wird betreten
sed -ne 's/#define \(IMG_[A-Z_0-9]\+\) \+\([0-9]\+\)/\1 = \2/p' ../../../src/common/eibloadresult.h > result.inc
CC gen.o
CCLD gen
./gen > gen.inc
cat io.inc gen.inc result.inc footer.inc > EIBConnection.rb
make[5]: Verzeichnis „/home/pi/knxd/src/client/ruby“ wird verlassen
Making all in lua
make[5]: Verzeichnis „/home/pi/knxd/src/client/lua“ wird betreten
sed -ne 's/#define \(IMG_[A-Z_0-9]\+\) \+\([0-9]\+\)/\1 = \2/p' ../../../src/common/eibloadresult.h > result.inc
CC gen.o
CCLD gen
./gen > gen.inc
cat io.inc gen.inc result.inc > EIBConnection.lua
make[5]: Verzeichnis „/home/pi/knxd/src/client/lua“ wird verlassen
Making all in go
make[5]: Verzeichnis „/home/pi/knxd/src/client/go“ wird betreten
sed -ne 's/#define \(IMG_[A-Z_0-9]\+\) \+\([0-9]\+\)/const \1 = \2/p' ../../../src/common/eibloadresult.h > result.inc
CC gen.o
CCLD gen
./gen > gen.inc
cat io.inc gen.inc result.inc > EIBConnection.go
make[5]: Verzeichnis „/home/pi/knxd/src/client/go“ wird verlassen
Making all in .
make[5]: Verzeichnis „/home/pi/knxd/src/client“ wird betreten
make[5]: Für das Ziel „all-am“ ist nichts zu tun.
make[5]: Verzeichnis „/home/pi/knxd/src/client“ wird verlassen
make[4]: Verzeichnis „/home/pi/knxd/src/client“ wird verlassen
Making all in usb
make[4]: Verzeichnis „/home/pi/knxd/src/usb“ wird betreten
CXX usb.o
CXX dummy.o
CXX findknxusb.o
CXXLD findknxusb
AR libusb.a
ar: `u' modifier ignored since `D' is the default (see `U')
make[4]: Verzeichnis „/home/pi/knxd/src/usb“ wird verlassen
Making all in libserver
make[4]: Verzeichnis „/home/pi/knxd/src/libserver“ wird betreten
CXX common.o
CXX trace.o
CXX emi.o
CXX ipsupport.o
CXX lowlevel.o
CXX router.o
CXX layer4.o
CXX link.o
CXX lpdu.o
CXX tpdu.o
CXX apdu.o
CXX eibnetip.o
CXX client.o
CXX connection.o
CXX groupcache.o
CXX groupcacheclient.o
CXX busmonitor.o
CXX server.o
CXX localserver.o
CXX inetserver.o
CXX systemdserver.o
CXX eibnetserver.o
CXX emi_common.o
CXX emi1.o
CXX emi2.o
CXX cemi.o
CXX eibusb.o
CXX usblowlevel.o
CXX llserial.o
CXX lltcp.o
CXX lowlatency.o
AR libeibstack.a
ar: `u' modifier ignored since `D' is the default (see `U')
AR libserver.a
ar: `u' modifier ignored since `D' is the default (see `U')
make[4]: Verzeichnis „/home/pi/knxd/src/libserver“ wird verlassen
Making all in backend
make[4]: Verzeichnis „/home/pi/knxd/src/backend“ wird betreten
CXX ft12.o
CXX tpuart.o
CXX ncn5120.o
CXX eibnetrouter.o
CXX eibnettunnel.o
CXX log.o
CXX dummy.o
CXX nat.o
CXX fqueue.o
CXX fpace.o
AR libbackend.a
ar: `u' modifier ignored since `D' is the default (see `U')
make[4]: Verzeichnis „/home/pi/knxd/src/backend“ wird verlassen
Making all in server
make[4]: Verzeichnis „/home/pi/knxd/src/server“ wird betreten
CXX knxd-knxd.o
CXX knxd_args.o
CXXLD knxd
CXXLD knxd_args
make[4]: Verzeichnis „/home/pi/knxd/src/server“ wird verlassen
Making all in tools
make[4]: Verzeichnis „/home/pi/knxd/src/tools“ wird betreten
CC common.o
CC eibread-cgi.o
CC eibwrite-cgi.o
CC knxtool.o
CCLD eibwrite-cgi
CCLD eibread-cgi
CCLD knxtool
make[4]: Verzeichnis „/home/pi/knxd/src/tools“ wird verlassen
Making all in examples
make[4]: Verzeichnis „/home/pi/knxd/src/examples“ wird betreten
make[4]: Für das Ziel „all“ ist nichts zu tun.
make[4]: Verzeichnis „/home/pi/knxd/src/examples“ wird verlassen
make[4]: Verzeichnis „/home/pi/knxd/src“ wird betreten
make[4]: Für das Ziel „all-am“ ist nichts zu tun.
make[4]: Verzeichnis „/home/pi/knxd/src“ wird verlassen
make[3]: Verzeichnis „/home/pi/knxd/src“ wird verlassen
Making all in systemd
make[3]: Verzeichnis „/home/pi/knxd/systemd“ wird betreten
make[3]: Für das Ziel „all“ ist nichts zu tun.
make[3]: Verzeichnis „/home/pi/knxd/systemd“ wird verlassen
make[2]: Verzeichnis „/home/pi/knxd“ wird verlassen
make[1]: Verzeichnis „/home/pi/knxd“ wird verlassen
rm -f debian/*.debhelper.log
debian/rules override_dh_auto_test
make[1]: Verzeichnis „/home/pi/knxd“ wird betreten
bash tools/test.sh
++ pwd
++ pwd
++ pwd
++ pwd
++ pwd
+ export PATH=/home/pi/knxd/src/tools/.libs:/home/pi/knxd/src/tools:/home/pi/knxd/src/server/.libs:/home/pi/knxd/src/server:/home/pi/knxd/src/server:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
+ PATH=/home/pi/knxd/src/tools/.libs:/home/pi/knxd/src/tools:/home/pi/knxd/src/server/.libs:/home/pi/knxd/src/server:/home/pi/knxd/src/server:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
++ tempfile
+ EF=/tmp/filehgaNT3
+ knxd -e 1.2.3 --stop-right-now
+ knxd -e 1.2.3 --stop-right-now -b dummy:
+ knxd -B log -e 1.2.3 --stop-right-now -b dummy: -b dummy:
+ knxd -e 1.2.3 --stop-right-now -b dummy: -b dummy: --tpuarts-disch-reset
+ knxd -e 1.2.3 --stop-right-now -b dummy: --tpuarts-disch-reset -b dummy:
+ knxd -e 1.2.3 --stop-right-now -T -b dummy: -b dummy:
+ knxd -e 1.2.3 --stop-right-now -c -b dummy: -b dummy:
++ tempfile
+ S1=/tmp/fileZo5Uye
+ rm /tmp/fileZo5Uye
++ tempfile
+ S2=/tmp/file3x5LCc
+ rm /tmp/file3x5LCc
++ tempfile
+ S3=/tmp/filedokFdg
+ rm /tmp/filedokFdg
++ tempfile
+ L1=/tmp/fileNt69of
++ tempfile
+ L2=/tmp/fileI4W2Uf
++ tempfile
+ L3=/tmp/filexWnpPi
++ tempfile
+ L4=/tmp/fileu82Vsi
++ tempfile
+ L5=/tmp/filehR1hXi
++ tempfile
+ E1=/tmp/fileIKjMth
++ tempfile
+ E2=/tmp/fileHZh5Zh
++ tempfile
+ E3=/tmp/fileiUXR8k
++ tempfile
+ E4=/tmp/filetV33El
++ tempfile
+ E5=/tmp/fileyPDE7j
+ PORT=34849
+ PORT2=34848
+ KNX1=24887
+ trap 'echo T1; rm -f $L1 $L2 $E1 $E2 $EF; kill $KNX1; wait' 0 1 2
+ knxd -n K1 -B log -t 0xfffc -f 9 -e 4.1.0 -E 4.1.1:5 -B log -c -B log -u/tmp/fileZo5Uye --multi-port -D -B log -A delay=200 -B pace -R -B log -T --Server=224.99.98.97:34849 -bdummy:
+ sleep 2
K1: Layer 4 [ 1:main 0.000] initialized
K1: I00000000: [ 1:main] 0.14.18:5e707fd: knxd -n K1 -B log -t 0xfffc -f 9 -e 4.1.0 -E 4.1.1:5 -B log -c -B log -u/tmp/fileZo5Uye --multi-port -D -B log -A delay=200 -B pace -R -B log -T --Server=224.99.98.97:34849 -bdummy:
K1: Layer 4 [ 1:main 0.000] setting up
K1: Layer 4 [ 5:A.cache/G 0.000] GroupCacheInit
K1: Layer 0 [ 6:log/A.cache 0.000] State setup
K1: Layer 3 [ 4:A.cache/Conn 0.000] registerLink: 4:A.cache
K1: Layer 0 [ 7:log/main 0.000] State setup
K1: Layer 0 [11:log/B.unix 0.001] State setup
K1: Layer 3 [ 8:B.unix/local 0.001] registerLink: 8:B.unix
K1: Layer 0 [15:log/tunnel 0.001] State setup
K1: Layer 0 [18:log/router 0.001] State setup
K1: N00000000: [19:C.pace] The 'pace' filter without a queue acts globally.
K1: Layer 3 [12:server/Server 0.002] registerLink: 12:server
K1: Layer 3 [20:D.dummy/Conn 0.002] registerLink: 20:D.dummy
K1: I00000055: [ 1:main] Connected: cfg:D.dummy.
K1: I00000055: [ 1:main] Connected: cfg:server.
K1: I00000055: [ 1:main] Connected: cfg:B.unix.
K1: I00000055: [ 1:main] Connected: cfg:A.cache.
K1: Layer 4 [ 1:main 0.003] setup OK
K1: W00000000: [ 1:main] Consider using a config file.
K1: Layer 4 [ 1:main 0.003] trigger going up
K1: Layer 0 [ 7:log/main 0.003] State start
K1: Layer 3 [20:D.dummy/Conn 0.003] Start: cfg:D.dummy
K1: Layer 5 [20:D.dummy/Conn 0.003] down => >up
K1: Layer 5 [20:D.dummy/Conn 0.004] Starting
K1: Layer 5 [20:D.dummy/Conn 0.004] >up => up
K1: Layer 4 [20:D.dummy/Conn 0.004] up
K1: Layer 5 [20:D.dummy/Conn 0.004] Started
K1: Layer 4 [20:D.dummy/Conn 0.004] up
K1: Layer 3 [12:server/Server 0.004] Start: cfg:server
K1: Layer 5 [12:server/Server 0.004] down => >up
K1: Layer 8 [12:server/Server 0.005] Open
K1: Layer 8 [23:router/driver 0.005] OpenD
K1: Layer 8 [23:router/driver 0.006] OpenedD
K1: Layer 0 [24:log/router 0.006] State setup
K1: N00000000: [25:C.pace] The 'pace' filter without a queue acts globally.
K1: Layer 3 [22:router/ConnC 0.007] registerLink: 22:router_22
K1: Layer 3 [22:router/ConnC 0.007] Start: cfg:router
K1: Layer 5 [22:router/ConnC 0.007] down => >up
K1: Layer 5 [22:router/ConnC 0.007] Starting
K1: Layer 0 [24:log/router 0.007] State start
K1: Layer 0 [24:log/router 0.007] State started
K1: Layer 5 [22:router/ConnC 0.008] >up => up
K1: Layer 4 [22:router/ConnC 0.008] up
K1: Layer 5 [22:router/ConnC 0.008] Started
K1: Layer 4 [22:router/ConnC 0.008] up
K1: Layer 8 [12:server/Server 0.008] Opened
K1: Layer 5 [12:server/Server 0.008] >up => up
K1: Layer 4 [12:server/Server 0.008] up
K1: Layer 5 [12:server/Server 0.008] Started
K1: Layer 4 [12:server/Server 0.009] up
K1: Layer 3 [ 4:A.cache/Conn 0.009] Start: cfg:A.cache
K1: Layer 5 [ 4:A.cache/Conn 0.009] down => >up
K1: Layer 5 [ 4:A.cache/Conn 0.009] Starting
K1: Layer 0 [ 6:log/A.cache 0.009] State start
K1: Layer 0 [ 6:log/A.cache 0.009] State started
K1: Layer 5 [ 4:A.cache/Conn 0.009] >up => up
K1: Layer 4 [ 4:A.cache/Conn 0.009] up
K1: Layer 5 [ 4:A.cache/Conn 0.010] Started
K1: Layer 4 [ 4:A.cache/Conn 0.010] up
K1: Layer 3 [ 8:B.unix/local 0.010] Start: cfg:B.unix
K1: Layer 5 [ 8:B.unix/local 0.010] down => >up
K1: Layer 8 [ 8:B.unix/local 0.010] OpenLocalSocket /tmp/fileZo5Uye
K1: Layer 8 [ 8:B.unix/local 0.010] LocalSocket opened
K1: Layer 5 [ 8:B.unix/local 0.010] >up => up
K1: Layer 4 [ 8:B.unix/local 0.010] up
K1: Layer 5 [ 8:B.unix/local 0.010] Started
K1: Layer 4 [ 8:B.unix/local 0.010] up
K1: Layer 4 [ 1:main 0.011] going up triggered
K1: Layer 4 [ 1:main 0.011] check start
K1: Layer 4 [ 1:main 0.011] check end: want_up 1 some 1>1 all 0>1, going 0 up 5 down 0
K1: Layer 0 [ 7:log/main 0.011] State started
K1: Layer 4 [ 1:main 0.011] all drivers up
K1: Layer 4 [ 1:main 0.011] up
+ KNX2=24890
+ sleep 2
+ knxd -n K2 -B log -t 0xfffc -f 9 -e 4.2.0 -E 4.2.1:5 -D -B log -T -B log -R --Server=224.99.98.96:34848 -B log -u/tmp/file3x5LCc -B log -b ip:224.99.98.97:34849
K2: Layer 4 [ 1:main 0.000] initialized
K2: I00000000: [ 1:main] 0.14.18:5e707fd: knxd -n K2 -B log -t 0xfffc -f 9 -e 4.2.0 -E 4.2.1:5 -D -B log -T -B log -R --Server=224.99.98.96:34848 -B log -u/tmp/file3x5LCc -B log -b ip:224.99.98.97:34849
K2: Layer 4 [ 1:main 0.000] setting up
K2: Layer 0 [ 4:log/main 0.000] State setup
K2: Layer 0 [ 8:log/tunnel 0.000] State setup
K2: Layer 0 [11:log/router 0.000] State setup
K2: Layer 3 [ 5:server/Server 0.000] registerLink: 5:server
K2: Layer 0 [15:log/A.unix 0.001] State setup
K2: Layer 3 [12:A.unix/local 0.001] registerLink: 12:A.unix
K2: Layer 0 [18:log/B.ip 0.001] State setup
K2: N00000000: [19:ip.pace_] The 'pace' filter without a queue acts globally.
K2: Layer 3 [16:B.ip/Conn 0.001] registerLink: 16:B.ip
K2: I00000055: [ 1:main] Connected: cfg:B.ip.
K2: I00000055: [ 1:main] Connected: cfg:A.unix.
K2: I00000055: [ 1:main] Connected: cfg:server.
K2: Layer 4 [ 1:main 0.001] setup OK
K2: W00000000: [ 1:main] Consider using a config file.
K2: Layer 4 [ 1:main 0.001] trigger going up
K2: Layer 0 [ 4:log/main 0.001] State start
K2: Layer 3 [16:B.ip/Conn 0.001] Start: cfg:B.ip
K2: Layer 5 [16:B.ip/Conn 0.001] down => >up
K2: Layer 5 [16:B.ip/Conn 0.001] Starting
K2: Layer 0 [18:log/B.ip 0.001] State start
K2: Layer 2 [17:B.ip/ip 0.001] Open
K2: Layer 2 [17:B.ip/ip 0.002] Opened
K2: Layer 0 [18:log/B.ip 0.002] State started
K2: Layer 5 [16:B.ip/Conn 0.002] >up => up
K2: Layer 4 [16:B.ip/Conn 0.002] up
K2: Layer 5 [16:B.ip/Conn 0.002] Started
K2: Layer 4 [16:B.ip/Conn 0.002] up
K2: Layer 3 [12:A.unix/local 0.002] Start: cfg:A.unix
K2: Layer 5 [12:A.unix/local 0.002] down => >up
K2: Layer 8 [12:A.unix/local 0.002] OpenLocalSocket /tmp/file3x5LCc
K2: Layer 8 [12:A.unix/local 0.002] LocalSocket opened
K2: Layer 5 [12:A.unix/local 0.002] >up => up
K2: Layer 4 [12:A.unix/local 0.002] up
K2: Layer 5 [12:A.unix/local 0.002] Started
K2: Layer 4 [12:A.unix/local 0.002] up
K2: Layer 3 [ 5:server/Server 0.002] Start: cfg:server
K2: Layer 5 [ 5:server/Server 0.002] down => >up
K2: Layer 8 [ 5:server/Server 0.002] Open
K2: Layer 8 [21:router/driver 0.003] OpenD
K2: Layer 8 [21:router/driver 0.003] OpenedD
K2: Layer 0 [22:log/router 0.003] State setup
K2: N00000000: [23:router.pace_] The 'pace' filter without a queue acts globally.
K2: Layer 3 [20:router/ConnC 0.003] registerLink: 20:router_20
K2: Layer 3 [20:router/ConnC 0.003] Start: cfg:router
K2: Layer 5 [20:router/ConnC 0.003] down => >up
K2: Layer 5 [20:router/ConnC 0.003] Starting
K2: Layer 0 [22:log/router 0.003] State start
K2: Layer 0 [22:log/router 0.003] State started
K2: Layer 5 [20:router/ConnC 0.003] >up => up
K2: Layer 4 [20:router/ConnC 0.003] up
K2: Layer 5 [20:router/ConnC 0.003] Started
K2: Layer 4 [20:router/ConnC 0.003] up
K2: Layer 8 [ 5:server/Server 0.004] Opened
K2: Layer 5 [ 5:server/Server 0.004] >up => up
K2: Layer 4 [ 5:server/Server 0.004] up
K2: Layer 5 [ 5:server/Server 0.004] Started
K2: Layer 4 [ 5:server/Server 0.004] up
K2: Layer 4 [ 1:main 0.004] going up triggered
K2: Layer 4 [ 1:main 0.004] check start
K2: Layer 4 [ 1:main 0.004] check end: want_up 1 some 1>1 all 0>1, going 0 up 4 down 0
K2: Layer 0 [ 4:log/main 0.004] State started
K2: Layer 4 [ 1:main 0.004] all drivers up
K2: Layer 4 [ 1:main 0.004] up
+ KNX3=24894
+ trap 'echo T2; rm -f $L1 $L2 $E1 $E2 $EF; kill $KNX1 $KNX2 $KNX3; wait' 0 1 2
+ sleep 1
+ knxd -n K3 -B log -t 0xfffc -f 9 -e 4.3.0 -E 4.3.1:5 -B log -u/tmp/filedokFdg -B log -b ipt:localhost:34848:34851
K3: Layer 4 [ 1:main 0.000] initialized
K3: I00000000: [ 1:main] 0.14.18:5e707fd: knxd -n K3 -B log -t 0xfffc -f 9 -e 4.3.0 -E 4.3.1:5 -B log -u/tmp/filedokFdg -B log -b ipt:localhost:34848:34851
K3: Layer 4 [ 1:main 0.000] setting up
K3: Layer 0 [ 4:log/main 0.000] State setup
K3: Layer 0 [ 8:log/A.unix 0.000] State setup
K3: Layer 3 [ 5:A.unix/local 0.000] registerLink: 5:A.unix
K3: Layer 0 [11:log/B.ipt 0.000] State setup
K3: Layer 3 [ 9:B.ipt/Conn 0.001] registerLink: 9:B.ipt
K3: I00000055: [ 1:main] Connected: cfg:B.ipt.
K3: I00000055: [ 1:main] Connected: cfg:A.unix.
K3: Layer 4 [ 1:main 0.001] setup OK
K3: W00000000: [ 1:main] Consider using a config file.
K3: Layer 4 [ 1:main 0.001] trigger going up
K3: Layer 0 [ 4:log/main 0.001] State start
K3: Layer 3 [ 9:B.ipt/Conn 0.001] Start: cfg:B.ipt
K3: Layer 5 [ 9:B.ipt/Conn 0.001] down => >up
K3: Layer 5 [ 9:B.ipt/Conn 0.001] Starting
K3: Layer 0 [11:log/B.ipt 0.001] State start
K3: Layer 2 [10:B.ipt/ipt 0.001] Open
K3: Layer 2 [10:B.ipt/ipt 0.003] Opened
K3: Layer 4 [ 9:B.ipt/Conn 0.003] >up
K3: Layer 3 [ 5:A.unix/local 0.003] Start: cfg:A.unix
K3: Layer 5 [ 5:A.unix/local 0.003] down => >up
K3: Layer 8 [ 5:A.unix/local 0.003] OpenLocalSocket /tmp/filedokFdg
K3: Layer 8 [ 5:A.unix/local 0.003] LocalSocket opened
K3: Layer 5 [ 5:A.unix/local 0.003] >up => up
K3: Layer 4 [ 5:A.unix/local 0.003] up
K3: Layer 5 [ 5:A.unix/local 0.003] Started
K3: Layer 4 [ 5:A.unix/local 0.003] up
K3: Layer 4 [ 1:main 0.003] going up triggered
K3: Layer 4 [ 1:main 0.003] check start
K3: Layer 4 [ 9:B.ipt/Conn 0.004] is >up
K3: Layer 4 [ 1:main 0.004] check end: want_up 1 some 1>1 all 0>0, going 1 up 1 down 0
K2: Layer 3 [ 5:server/Server 2.012] Allocate 4.2.1
K2: Layer 8 [ 5:server/Server 2.012] Tunnel CONNECTION_REQ with 4.2.1
K2: Layer 9 [25:tunnel/4.2.1 2.012] has 4.2.1
K2: Layer 0 [26:log/tunnel 2.012] State setup
K2: Layer 8 [25:tunnel/4.2.1 2.012] Start Conn 1
K2: Layer 3 [24:tunnel/ConnC 2.012] registerLink: 24:tunnel_24
K2: Layer 3 [24:tunnel/ConnC 2.012] Start: cfg:tunnel
K2: Layer 5 [24:tunnel/ConnC 2.012] down => >up
K2: Layer 5 [24:tunnel/ConnC 2.012] Starting
K2: Layer 0 [26:log/tunnel 2.012] State start
K2: Layer 0 [26:log/tunnel 2.012] State started
K2: Layer 5 [24:tunnel/ConnC 2.012] >up => up
K2: Layer 4 [24:tunnel/ConnC 2.012] up
K2: Layer 5 [24:tunnel/ConnC 2.012] Started
K2: Layer 4 [24:tunnel/ConnC 2.012] up
K2: Layer 4 [ 1:main 2.013] check start
K2: Layer 4 [ 1:main 2.013] check end: want_up 1 some 1>1 all 0>1, going 0 up 4 down 0
K3: Layer 0 [11:log/B.ipt 0.005] State started
K3: Layer 5 [ 9:B.ipt/Conn 0.005] >up => up
K3: Layer 4 [ 9:B.ipt/Conn 0.005] up
K3: Layer 5 [ 9:B.ipt/Conn 0.005] Started
K3: Layer 4 [ 1:main 0.005] check start
K3: Layer 4 [ 1:main 0.005] check end: want_up 1 some 1>1 all 0>1, going 0 up 2 down 0
K3: Layer 0 [ 4:log/main 0.005] State started
K3: Layer 4 [ 1:main 0.005] all drivers up
K3: Layer 4 [ 1:main 0.005] up
+ PL1=24897
+ PL2=24898
+ knxtool vbusmonitor1 local:/tmp/fileZo5Uye
+ PL3=24899
+ knxtool vbusmonitor1 local:/tmp/filedokFdg
+ PL5=24900
+ sleep 1
+ knxtool grouplisten local:/tmp/file3x5LCc 1/2/3
+ knxtool vbusmonitor1 local:/tmp/file3x5LCc
K3: Layer 8 [ 5:A.unix/local 0.982] New Connection
K3: Layer 8 [13:A.unix/CConn 0.982] ClientConnection Init
K3: Layer 3 [13:A.unix/CConn 0.982] Allocate 4.3.1
K3: Layer 7 [15:A.unix/BusMon 0.983] Open A_Busmonitor
K3: Layer 3 [ 1:main 0.983] registerVBusmonitor
K2: Layer 8 [12:A.unix/local 2.993] New Connection
K2: Layer 8 [28:A.unix/CConn 2.993] ClientConnection Init
K2: Layer 3 [28:A.unix/CConn 2.994] Allocate 4.2.2
K2: Layer 7 [30:A.unix/BusMon 2.994] Open A_Busmonitor
K2: Layer 3 [ 1:main 2.994] registerVBusmonitor
K2: Layer 8 [12:A.unix/local 2.995] New Connection
K1: Layer 8 [ 8:B.unix/local 5.005] New Connection
K1: Layer 8 [26:B.unix/CConn 5.005] ClientConnection Init
K1: Layer 3 [26:B.unix/CConn 5.005] Allocate 4.1.1
K2: Layer 8 [31:A.unix/CConn 2.996] ClientConnection Init
K1: Layer 7 [28:B.unix/BusMon 5.006] Open A_Busmonitor
K1: Layer 3 [ 1:main 5.006] registerVBusmonitor
K2: Layer 3 [31:A.unix/CConn 2.996] Allocate 4.2.3
K2: Layer 7 [32:A.unix@4.2.3/Group 2.997] OpenGroup
K2: Layer 4 [34:A.unix/TGr 2.997] OpenGroup 1/2/3 RW
K2: Layer 0 [35:log/A.unix 2.997] State setup
K2: Layer 7 [32:A.unix@4.2.3/Group 2.998] OpenGroup complete
K2: Layer 3 [33:A.unix/ConnS 2.998] registerLink: 33:A.unix_33
K2: Layer 3 [33:A.unix/ConnS 2.998] Start: cfg:A.unix
K2: Layer 5 [33:A.unix/ConnS 2.998] down => >up
K2: Layer 5 [33:A.unix/ConnS 2.998] Starting
K2: Layer 0 [35:log/A.unix 2.998] State start
K2: Layer 0 [35:log/A.unix 2.999] State started
K2: Layer 5 [33:A.unix/ConnS 2.999] >up => up
K2: Layer 4 [33:A.unix/ConnS 2.999] up
K2: Layer 5 [33:A.unix/ConnS 2.999] Started
K2: Layer 4 [33:A.unix/ConnS 2.999] up
K2: Layer 4 [ 1:main 3.000] check start
K2: Layer 4 [ 1:main 3.000] check end: want_up 1 some 1>1 all 0>1, going 0 up 4 down 0
+ PL4=24902
+ sleep 2
+ knxtool groupcachereadsync local:/tmp/fileZo5Uye 1/2/3 3
K1: Layer 8 [ 8:B.unix/local 6.019] New Connection
K1: Layer 8 [29:B.unix/CConn 6.019] ClientConnection Init
K1: Layer 3 [29:B.unix/CConn 6.019] Allocate 4.1.2
K1: Layer 4 [ 5:A.cache/G 6.019] GroupCacheRead 1/2/3 1 3
K1: Layer 0 [ 6:log/A.cache 6.019] Recv L_Data low from 0.0.0 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Read
K1: Layer 0 [ 7:log/main 6.019] Recv L_Data low from 4.1.0 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Read
K1: Layer 0 [ 7:log/main 6.020] Send L_Data low from 4.1.0 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Read
K1: Layer 6 [22:router/ConnC 6.020] sending, send_more clear
K1: Layer 0 [24:log/router 6.020] Send L_Data low from 4.1.0 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Read
K1: Layer 2 [25:C.pace/router 6.020] out 1/2: delay for 0.202 sec
K1: Layer 6 [ 4:A.cache/Conn 6.020] sending, send_more clear
K1: Layer 0 [ 6:log/A.cache 6.020] Send L_Data low from 4.1.0 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Read
K1: Layer 6 [ 6:log/A.cache 6.020] send next
K1: Layer 6 [ 4:A.cache/Conn 6.020] sendNext called, send_more set
K1: Layer 6 [ 1:main 6.020] sending set
K1: Layer 6 [20:D.dummy/Conn 6.021] sending, send_more clear
K1: Layer 6 [20:D.dummy/Conn 6.021] sendNext called, send_more set
K1: Layer 6 [ 1:main 6.021] sending set
K1: Layer 6 [22:router/ConnC 6.021] still waiting
K1: Layer 6 [ 1:main 6.021] wait L
K2: Layer 0 [18:log/B.ip 4.011] Recv L_Data low from 4.1.0 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Read
K2: Layer 8 [ 1:main 4.012] unknown addr 4.1.0
K2: Layer 0 [ 4:log/main 4.012] Recv L_Data low from 4.1.0 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Read
K2: Layer 0 [ 4:log/main 4.012] Send L_Data low from 4.1.0 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Read
K2: Layer 6 [33:A.unix/ConnS 4.013] sending, send_more clear
K2: Layer 0 [35:log/A.unix 4.013] Send L_Data low from 4.1.0 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Read
K2: Layer 7 [31:A.unix/CConn 4.013] Recv(002): 00 00
K2: Layer 6 [35:log/A.unix 4.013] send next
K2: Layer 6 [33:A.unix/ConnS 4.013] sendNext called, send_more set
K2: Layer 6 [ 1:main 4.014] sending set
K2: Layer 6 [24:tunnel/ConnC 4.014] sending, send_more clear
K2: Layer 6 [24:tunnel/ConnC 4.014] sendNext called, send_more set
K2: Layer 6 [ 1:main 4.014] sending set
K2: Layer 6 [20:router/ConnC 4.014] sending, send_more clear
K2: Layer 0 [22:log/router 4.015] Send L_Data low from 4.1.0 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Read
K2: Layer 2 [23:router.pace_/router 4.015] out 1/2: delay for 0.017 sec
K2: Layer 6 [33:A.unix/ConnS 4.015] is OK
K2: Layer 6 [24:tunnel/ConnC 4.015] is OK
K2: Layer 6 [20:router/ConnC 4.015] still waiting
K2: Layer 6 [ 1:main 4.015] wait L
K2: Layer 0 [26:log/tunnel 4.016] Send L_Data low from 4.1.0 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Read
K3: Layer 0 [11:log/B.ipt 2.009] Recv L_Data low from 4.1.0 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Read
K3: Layer 8 [ 1:main 2.009] unknown addr 4.1.0
K3: Layer 0 [ 4:log/main 2.009] Recv L_Data low from 4.1.0 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Read
K3: Layer 0 [ 4:log/main 2.009] Send L_Data low from 4.1.0 to 1/2/3 hops: 03 T_DATA_XXX_REQ A_GroupValue_Read
K3: Layer 6 [ 9:B.ipt/Conn 2.009] is OK
K3: Layer 6 [ 5:A.unix/local 2.010] is OK
K3: Layer 6 [ 1:main 2.010] OK
K3: Layer 6 [ 4:log/main 2.010] send next
K3: Layer 6 [ 2:main/L 2.010] OK L
K2: Layer 8 [25:tunnel/4.2.1 4.019] TUNNEL_ACK
K2: Layer 6 [26:log/tunnel 4.019] send next
K2: Layer 2 [23:router.pace_/router 4.029] delay done
K2: Layer 6 [22:log/router 4.029] send next
K2: Layer 6 [20:router/ConnC 4.029] sendNext called, send_more set
K2: Layer 6 [33:A.unix/ConnS 4.030] is OK
K2: Layer 6 [24:tunnel/ConnC 4.030] is OK
K2: Layer 6 [20:router/ConnC 4.030] is OK
K2: Layer 6 [12:A.unix/local 4.030] is OK
K2: Layer 6 [ 5:server/Server 4.030] is OK
K2: Layer 6 [16:B.ip/Conn 4.030] is OK
K2: Layer 6 [ 1:main 4.031] OK
K2: Layer 6 [ 4:log/main 4.031] send next
K2: Layer 6 [ 2:main/L 4.031] OK L
K1: Layer 2 [25:C.pace/router 6.222] delay done
K1: Layer 6 [24:log/router 6.222] send next
K1: Layer 6 [22:router/ConnC 6.222] sendNext called, send_more set
K1: Layer 6 [22:router/ConnC 6.222] is OK
K1: Layer 6 [ 4:A.cache/Conn 6.222] is OK
K1: Layer 6 [ 8:B.unix/local 6.222] is OK
K1: Layer 6 [12:server/Server 6.222] is OK
K1: Layer 6 [20:D.dummy/Conn 6.222] is OK
K1: Layer 6 [ 1:main 6.222] OK
K1: Layer 6 [ 7:log/main 6.222] send next
K1: Layer 6 [ 2:main/L 6.222] OK L
K1: Layer 4 [ 5:A.cache/G 7.020] GroupCache reread timeout
K1: Layer 8 [29:B.unix/CConn 7.021] ClientConnection 4.1.2 closing
K1: Layer 3 [ 1:main 7.021] Release 4.1.2
+ echo xmit 1
xmit 1
+ knxtool groupswrite local:/tmp/fileZo5Uye 1/2/3 4
K1: Layer 8 [ 8:B.unix/local 8.025] New Connection
K1: Layer 8 [30:B.unix/CConn 8.026] ClientConnection Init
K1: Layer 3 [30:B.unix/CConn 8.026] Allocate 4.1.3
K1: Layer 7 [31:B.unix@4.1.3/Group 8.026] OpenGroup
K1: Layer 4 [33:B.unix/TGr 8.026] OpenGroup 1/2/3 WO
K1: Layer 0 [34:log/B.unix 8.026] State setup
K1: Layer 7 [31:B.unix@4.1.3/Group 8.026] OpenGroup complete
K1: Layer 3 [32:B.unix/ConnS 8.026] registerLink: 32:B.unix_32
K1: Layer 3 [32:B.unix/ConnS 8.026] Start: cfg:B.unix
K1: Layer 5 [32:B.unix/ConnS 8.026] down => >up
K1: Layer 5 [32:B.unix/ConnS 8.026] Starting
K1: Layer 0 [34:log/B.unix 8.026] State start
K1: Layer 0 [34:log/B.unix 8.026] State started
K1: Layer 5 [32:B.unix/ConnS 8.027] >up => up
K1: Layer 4 [32:B.unix/ConnS 8.027] up
K1: Layer 5 [32:B.unix/ConnS 8.027] Started
K1: Layer 4 [32:B.unix/ConnS 8.027] up
K1: Layer 4 [ 1:main 8.027] check start
K1: Layer 4 [ 1:main 8.027] check end: want_up 1 some 1>1 all 0>1, going 0 up 5 down 0
K1: Layer 7 [30:B.unix/CConn 8.027] recv Group(002): 00 84
K1: Layer 4 [33:B.unix/TGr 8.027] Recv Group T_DATA_XXX_REQ A_GroupValue_Write (small) 04
K1: Layer 0 [34:log/B.unix 8.027] Recv L_Data low from 0.0.0 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
Send request
K1: Layer 8 [32:B.unix/ConnS 8.027] found addr 4.1.3
K1: Layer 0 [ 7:log/main 8.028] Recv L_Data low from 4.1.3 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
+ sleep 1
K1: Layer 0 [ 7:log/main 8.029] Send L_Data low from 4.1.3 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
K1: Layer 6 [22:router/ConnC 8.029] sending, send_more clear
K1: Layer 0 [24:log/router 8.030] Send L_Data low from 4.1.3 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
K1: Layer 2 [25:C.pace/router 8.030] out 1/2: delay for 0.202 sec
K1: Layer 6 [ 4:A.cache/Conn 8.030] sending, send_more clear
K1: Layer 0 [ 6:log/A.cache 8.030] Send L_Data low from 4.1.3 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
K1: Layer 6 [ 6:log/A.cache 8.030] send next
K1: Layer 6 [ 4:A.cache/Conn 8.030] sendNext called, send_more set
K1: Layer 6 [ 1:main 8.030] sending set
K1: Layer 6 [20:D.dummy/Conn 8.030] sending, send_more clear
K1: Layer 6 [20:D.dummy/Conn 8.030] sendNext called, send_more set
K1: Layer 6 [ 1:main 8.030] sending set
K1: Layer 6 [32:B.unix/ConnS 8.030] is OK
K1: Layer 6 [22:router/ConnC 8.030] still waiting
K1: Layer 6 [ 1:main 8.030] wait L
K1: Layer 8 [30:B.unix/CConn 8.030] ClientConnection 4.1.3 closing
K1: Layer 3 [ 1:main 8.031] Release 4.1.3
K1: Layer 3 [32:B.unix/ConnS 8.031] unregisterLink: B.unix_32
K1: Layer 8 [30:B.unix/CConn 8.031] Exiting
K1: Layer 7 [30:B.unix/CConn 8.031] CloseGroup
K1: Layer 4 [33:B.unix/TGr 8.031] CloseGroup
K1: Layer 4 [ 1:main 8.031] check start
K1: Layer 4 [ 1:main 8.031] check end: want_up 1 some 1>1 all 1>1, going 0 up 5 down 0
K2: Layer 0 [18:log/B.ip 6.021] Recv L_Data low from 4.1.3 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
K2: Layer 8 [ 1:main 6.022] unknown addr 4.1.3
K2: Layer 0 [ 4:log/main 6.022] Recv L_Data low from 4.1.3 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
K2: Layer 0 [ 4:log/main 6.022] Send L_Data low from 4.1.3 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
K2: Layer 6 [33:A.unix/ConnS 6.022] sending, send_more clear
K2: Layer 0 [35:log/A.unix 6.022] Send L_Data low from 4.1.3 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
K2: Layer 7 [31:A.unix/CConn 6.022] Recv(002): 00 84
K2: Layer 6 [35:log/A.unix 6.022] send next
K2: Layer 6 [33:A.unix/ConnS 6.022] sendNext called, send_more set
K2: Layer 6 [ 1:main 6.022] sending set
K2: Layer 6 [24:tunnel/ConnC 6.022] sending, send_more clear
K2: Layer 6 [24:tunnel/ConnC 6.022] sendNext called, send_more set
K2: Layer 6 [ 1:main 6.022] sending set
K2: Layer 6 [20:router/ConnC 6.022] sending, send_more clear
K2: Layer 0 [22:log/router 6.022] Send L_Data low from 4.1.3 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
K2: Layer 2 [23:router.pace_/router 6.022] out 1/2: delay for 0.017 sec
K2: Layer 6 [33:A.unix/ConnS 6.022] is OK
K2: Layer 6 [24:tunnel/ConnC 6.022] is OK
K2: Layer 6 [20:router/ConnC 6.022] still waiting
K2: Layer 6 [ 1:main 6.022] wait L
K2: Layer 0 [26:log/tunnel 6.022] Send L_Data low from 4.1.3 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
K3: Layer 0 [11:log/B.ipt 4.015] Recv L_Data low from 4.1.3 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
K3: Layer 8 [ 1:main 4.015] unknown addr 4.1.3
K3: Layer 0 [ 4:log/main 4.015] Recv L_Data low from 4.1.3 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
K3: Layer 0 [ 4:log/main 4.015] Send L_Data low from 4.1.3 to 1/2/3 hops: 03 T_DATA_XXX_REQ A_GroupValue_Write (small) 04
K3: Layer 6 [ 9:B.ipt/Conn 4.015] is OK
K3: Layer 6 [ 5:A.unix/local 4.015] is OK
K3: Layer 6 [ 1:main 4.015] OK
K3: Layer 6 [ 4:log/main 4.015] send next
K3: Layer 6 [ 2:main/L 4.015] OK L
K2: Layer 8 [25:tunnel/4.2.1 6.024] TUNNEL_ACK
K2: Layer 6 [26:log/tunnel 6.024] send next
K2: Layer 2 [23:router.pace_/router 6.039] delay done
K2: Layer 6 [22:log/router 6.039] send next
K2: Layer 6 [20:router/ConnC 6.039] sendNext called, send_more set
K2: Layer 6 [33:A.unix/ConnS 6.039] is OK
K2: Layer 6 [24:tunnel/ConnC 6.039] is OK
K2: Layer 6 [20:router/ConnC 6.039] is OK
K2: Layer 6 [12:A.unix/local 6.039] is OK
K2: Layer 6 [ 5:server/Server 6.039] is OK
K2: Layer 6 [16:B.ip/Conn 6.039] is OK
K2: Layer 6 [ 1:main 6.039] OK
K2: Layer 6 [ 4:log/main 6.039] send next
K2: Layer 6 [ 2:main/L 6.039] OK L
K1: Layer 2 [25:C.pace/router 8.231] delay done
K1: Layer 6 [24:log/router 8.231] send next
K1: Layer 6 [22:router/ConnC 8.231] sendNext called, send_more set
K1: Layer 6 [22:router/ConnC 8.232] is OK
K1: Layer 6 [ 4:A.cache/Conn 8.232] is OK
K1: Layer 6 [ 8:B.unix/local 8.232] is OK
K1: Layer 6 [12:server/Server 8.232] is OK
K1: Layer 6 [20:D.dummy/Conn 8.232] is OK
K1: Layer 6 [ 1:main 8.232] OK
K1: Layer 6 [ 7:log/main 8.232] send next
K1: Layer 6 [ 2:main/L 8.233] OK L
+ echo xmit 2
xmit 2
+ knxtool groupswrite local:/tmp/file3x5LCc 1/2/3 5
K2: Layer 8 [12:A.unix/local 7.033] New Connection
K2: Layer 8 [36:A.unix/CConn 7.034] ClientConnection Init
K2: Layer 3 [36:A.unix/CConn 7.034] Allocate 4.2.4
K2: Layer 7 [37:A.unix@4.2.4/Group 7.035] OpenGroup
K2: Layer 4 [39:A.unix/TGr 7.035] OpenGroup 1/2/3 WO
K2: Layer 0 [40:log/A.unix 7.036] State setup
K2: Layer 7 [37:A.unix@4.2.4/Group 7.036] OpenGroup complete
Send request
K2: Layer 3 [38:A.unix/ConnS 7.036] registerLink: 38:A.unix_38
K2: Layer 3 [38:A.unix/ConnS 7.037] Start: cfg:A.unix
K2: Layer 5 [38:A.unix/ConnS 7.037] down => >up
K2: Layer 5 [38:A.unix/ConnS 7.037] Starting
K2: Layer 0 [40:log/A.unix 7.037] State start
K2: Layer 0 [40:log/A.unix 7.037] State started
K2: Layer 5 [38:A.unix/ConnS 7.037] >up => up
K2: Layer 4 [38:A.unix/ConnS 7.037] up
K2: Layer 5 [38:A.unix/ConnS 7.037] Started
K2: Layer 4 [38:A.unix/ConnS 7.037] up
K2: Layer 4 [ 1:main 7.037] check start
K2: Layer 4 [ 1:main 7.037] check end: want_up 1 some 1>1 all 0>1, going 0 up 4 down 0
K2: Layer 7 [36:A.unix/CConn 7.037] recv Group(002): 00 85
K2: Layer 4 [39:A.unix/TGr 7.037] Recv Group T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K2: Layer 0 [40:log/A.unix 7.037] Recv L_Data low from 0.0.0 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K2: Layer 8 [38:A.unix/ConnS 7.037] found addr 4.2.4
K2: Layer 0 [ 4:log/main 7.037] Recv L_Data low from 4.2.4 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K2: Layer 0 [ 4:log/main 7.037] Send L_Data low from 4.2.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K2: Layer 6 [33:A.unix/ConnS 7.037] sending, send_more clear
K2: Layer 0 [35:log/A.unix 7.037] Send L_Data low from 4.2.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K2: Layer 7 [31:A.unix/CConn 7.037] Recv(002): 00 85
K2: Layer 6 [35:log/A.unix 7.038] send next
K2: Layer 6 [33:A.unix/ConnS 7.038] sendNext called, send_more set
K2: Layer 6 [ 1:main 7.038] sending set
K2: Layer 6 [24:tunnel/ConnC 7.038] sending, send_more clear
K2: Layer 6 [24:tunnel/ConnC 7.038] sendNext called, send_more set
K2: Layer 6 [ 1:main 7.038] sending set
K2: Layer 6 [20:router/ConnC 7.038] sending, send_more clear
K2: Layer 0 [22:log/router 7.038] Send L_Data low from 4.2.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K2: Layer 2 [23:router.pace_/router 7.038] out 1/2: delay for 0.017 sec
K2: Layer 6 [16:B.ip/Conn 7.038] sending, send_more clear
K2: Layer 0 [18:log/B.ip 7.038] Send L_Data low from 4.2.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K2: Layer 2 [19:ip.pace_/B.ip 7.038] out 1/2: delay for 0.017 sec
K2: Layer 6 [33:A.unix/ConnS 7.038] is OK
K2: Layer 6 [24:tunnel/ConnC 7.038] is OK
K2: Layer 6 [20:router/ConnC 7.038] still waiting
K2: Layer 6 [ 1:main 7.038] wait L
K2: Layer 0 [26:log/tunnel 7.038] Send L_Data low from 4.2.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K3: Layer 0 [11:log/B.ipt 5.031] Recv L_Data low from 4.2.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K3: Layer 8 [ 1:main 5.031] unknown addr 4.2.4
K3: Layer 0 [ 4:log/main 5.031] Recv L_Data low from 4.2.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K3: Layer 0 [ 4:log/main 5.031] Send L_Data low from 4.2.4 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K3: Layer 6 [ 9:B.ipt/Conn 5.031] is OK
K3: Layer 6 [ 5:A.unix/local 5.031] is OK
K3: Layer 6 [ 1:main 5.031] OK
K3: Layer 6 [ 4:log/main 5.031] send next
K3: Layer 6 [ 2:main/L 5.031] OK L
K2: Layer 8 [25:tunnel/4.2.1 7.039] TUNNEL_ACK
K2: Layer 6 [26:log/tunnel 7.039] send next
K1: Layer 0 [24:log/router 9.049] Recv L_Data low from 4.2.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K1: Layer 8 [ 1:main 9.049] unknown addr 4.2.4
K1: Layer 0 [ 7:log/main 9.050] Recv L_Data low from 4.2.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K1: Layer 0 [ 7:log/main 9.050] Send L_Data low from 4.2.4 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K1: Layer 6 [ 4:A.cache/Conn 9.050] sending, send_more clear
K1: Layer 0 [ 6:log/A.cache 9.050] Send L_Data low from 4.2.4 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 05
K1: Layer 6 [ 6:log/A.cache 9.050] send next
K1: Layer 6 [ 4:A.cache/Conn 9.050] sendNext called, send_more set
K1: Layer 6 [ 1:main 9.050] sending set
K1: Layer 6 [20:D.dummy/Conn 9.050] sending, send_more clear
K1: Layer 6 [20:D.dummy/Conn 9.050] sendNext called, send_more set
K1: Layer 6 [ 1:main 9.050] sending set
K1: Layer 6 [22:router/ConnC 9.050] is OK
K1: Layer 6 [ 4:A.cache/Conn 9.050] is OK
K1: Layer 6 [ 8:B.unix/local 9.050] is OK
K1: Layer 6 [12:server/Server 9.051] is OK
K1: Layer 6 [20:D.dummy/Conn 9.051] is OK
K2: Layer 8 [36:A.unix/CConn 7.041] ClientConnection 4.2.4 closing
K1: Layer 6 [ 1:main 9.051] OK
K1: Layer 6 [ 7:log/main 9.051] send next
K2: Layer 3 [ 1:main 7.041] Release 4.2.4
K2: Layer 3 [38:A.unix/ConnS 7.041] unregisterLink: A.unix_38
K1: Layer 6 [ 2:main/L 9.051] OK L
K2: Layer 8 [36:A.unix/CConn 7.041] Exiting
K2: Layer 7 [36:A.unix/CConn 7.041] CloseGroup
K2: Layer 4 [39:A.unix/TGr 7.042] CloseGroup
K2: Layer 4 [ 1:main 7.042] check start
+ sleep 1
K2: Layer 4 [ 1:main 7.042] check end: want_up 1 some 1>1 all 1>1, going 0 up 4 down 0
K2: Layer 2 [23:router.pace_/router 7.054] delay done
K2: Layer 6 [22:log/router 7.054] send next
K2: Layer 6 [20:router/ConnC 7.055] sendNext called, send_more set
K2: Layer 6 [33:A.unix/ConnS 7.055] is OK
K2: Layer 6 [24:tunnel/ConnC 7.055] is OK
K2: Layer 6 [20:router/ConnC 7.055] is OK
K2: Layer 6 [12:A.unix/local 7.055] is OK
K2: Layer 6 [ 5:server/Server 7.055] is OK
K2: Layer 6 [16:B.ip/Conn 7.055] still waiting
K2: Layer 2 [19:ip.pace_/B.ip 7.055] in 2/2: delay more, for 0.024 sec
K2: Layer 2 [19:ip.pace_/B.ip 7.078] delay done
K2: Layer 6 [18:log/B.ip 7.078] send next
K2: Layer 6 [16:B.ip/Conn 7.079] sendNext called, send_more set
K2: Layer 6 [33:A.unix/ConnS 7.079] is OK
K2: Layer 6 [24:tunnel/ConnC 7.079] is OK
K2: Layer 6 [20:router/ConnC 7.079] is OK
K2: Layer 6 [12:A.unix/local 7.079] is OK
K2: Layer 6 [ 5:server/Server 7.079] is OK
K2: Layer 6 [16:B.ip/Conn 7.079] is OK
K2: Layer 6 [ 1:main 7.079] OK
K2: Layer 6 [ 4:log/main 7.079] send next
K2: Layer 6 [ 2:main/L 7.079] OK L
+ echo xmit 3
xmit 3
+ knxtool groupswrite local:/tmp/filedokFdg 1/2/3 6
K3: Layer 8 [ 5:A.unix/local 6.047] New Connection
K3: Layer 8 [16:A.unix/CConn 6.048] ClientConnection Init
K3: Layer 3 [16:A.unix/CConn 6.048] Allocate 4.3.2
K3: Layer 7 [17:A.unix@4.3.2/Group 6.048] OpenGroup
K3: Layer 4 [19:A.unix/TGr 6.048] OpenGroup 1/2/3 WO
K3: Layer 0 [20:log/A.unix 6.048] State setup
K3: Layer 7 [17:A.unix@4.3.2/Group 6.048] OpenGroup complete
K3: Layer 3 [18:A.unix/ConnS 6.048] registerLink: 18:A.unix_18
K3: Layer 3 [18:A.unix/ConnS 6.048] Start: cfg:A.unix
K3: Layer 5 [18:A.unix/ConnS 6.048] down => >up
K3: Layer 5 [18:A.unix/ConnS 6.048] Starting
K3: Layer 0 [20:log/A.unix 6.048] State start
K3: Layer 0 [20:log/A.unix 6.048] State started
K3: Layer 5 [18:A.unix/ConnS 6.048] >up => up
K3: Layer 4 [18:A.unix/ConnS 6.048] up
K3: Layer 5 [18:A.unix/ConnS 6.048] Started
K3: Layer 4 [18:A.unix/ConnS 6.048] up
K3: Layer 4 [ 1:main 6.048] check start
K3: Layer 4 [ 1:main 6.049] check end: want_up 1 some 1>1 all 0>1, going 0 up 2 down 0
K3: Layer 7 [16:A.unix/CConn 6.049] recv Group(002): 00 86
K3: Layer 4 [19:A.unix/TGr 6.049] Recv Group T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K3: Layer 0 [20:log/A.unix 6.049] Recv L_Data low from 0.0.0 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K3: Layer 8 [18:A.unix/ConnS 6.049] found addr 4.3.2
K3: Layer 0 [ 4:log/main 6.049] Recv L_Data low from 4.3.2 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K3: Layer 0 [ 4:log/main 6.049] Send L_Data low from 4.3.2 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K3: Layer 6 [ 9:B.ipt/Conn 6.049] sending, send_more clear
K3: Layer 6 [ 9:B.ipt/Conn 6.049] sendNext called, send_more set
K3: Layer 6 [ 1:main 6.049] sending set
K3: Layer 6 [18:A.unix/ConnS 6.049] is OK
K3: Layer 6 [ 9:B.ipt/Conn 6.049] is OK
K3: Layer 6 [ 5:A.unix/local 6.049] is OK
K3: Layer 6 [ 1:main 6.049] OK
K3: Layer 6 [ 4:log/main 6.049] send next
K3: Layer 6 [ 2:main/L 6.049] OK L
K3: Layer 0 [11:log/B.ipt 6.049] Send L_Data low from 4.3.2 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
Send request
K2: Layer 8 [25:tunnel/4.2.1 8.058] TUNNEL_REQ
K2: Layer 0 [26:log/tunnel 8.058] Recv L_Data low from 4.3.2 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K2: Layer 8 [ 1:main 8.058] unknown addr 4.3.2
K2: Layer 0 [ 4:log/main 8.058] Recv L_Data low from 4.3.2 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K2: Layer 0 [ 4:log/main 8.058] Send L_Data low from 4.3.2 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K2: Layer 6 [33:A.unix/ConnS 8.058] sending, send_more clear
K2: Layer 0 [35:log/A.unix 8.058] Send L_Data low from 4.3.2 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K2: Layer 7 [31:A.unix/CConn 8.058] Recv(002): 00 86
K2: Layer 6 [35:log/A.unix 8.058] send next
K2: Layer 6 [33:A.unix/ConnS 8.058] sendNext called, send_more set
K2: Layer 6 [ 1:main 8.059] sending set
K2: Layer 6 [20:router/ConnC 8.059] sending, send_more clear
K2: Layer 0 [22:log/router 8.059] Send L_Data low from 4.3.2 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K2: Layer 2 [23:router.pace_/router 8.059] out 1/2: delay for 0.017 sec
K2: Layer 6 [16:B.ip/Conn 8.059] sending, send_more clear
K2: Layer 0 [18:log/B.ip 8.059] Send L_Data low from 4.3.2 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K2: Layer 2 [19:ip.pace_/B.ip 8.059] out 1/2: delay for 0.017 sec
K2: Layer 6 [33:A.unix/ConnS 8.059] is OK
K2: Layer 6 [24:tunnel/ConnC 8.059] is OK
K2: Layer 6 [20:router/ConnC 8.059] still waiting
K2: Layer 6 [ 1:main 8.059] wait L
K1: Layer 0 [24:log/router 10.069] Recv L_Data low from 4.3.2 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K1: Layer 8 [ 1:main 10.069] unknown addr 4.3.2
K1: Layer 0 [ 7:log/main 10.069] Recv L_Data low from 4.3.2 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K1: Layer 0 [ 7:log/main 10.069] Send L_Data low from 4.3.2 to 1/2/3 hops: 03 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K1: Layer 6 [ 4:A.cache/Conn 10.070] sending, send_more clear
+ sleep 1
K1: Layer 0 [ 6:log/A.cache 10.070] Send L_Data low from 4.3.2 to 1/2/3 hops: 03 T_DATA_XXX_REQ A_GroupValue_Write (small) 06
K1: Layer 6 [ 6:log/A.cache 10.070] send next
K1: Layer 6 [ 4:A.cache/Conn 10.070] sendNext called, send_more set
K1: Layer 6 [ 1:main 10.070] sending set
K3: Layer 6 [11:log/B.ipt 6.052] send next
K1: Layer 6 [20:D.dummy/Conn 10.070] sending, send_more clear
K3: Layer 8 [16:A.unix/CConn 6.052] ClientConnection 4.3.2 closing
K1: Layer 6 [20:D.dummy/Conn 10.070] sendNext called, send_more set
K1: Layer 6 [ 1:main 10.070] sending set
K3: Layer 3 [ 1:main 6.052] Release 4.3.2
K1: Layer 6 [22:router/ConnC 10.070] is OK
K3: Layer 3 [18:A.unix/ConnS 6.052] unregisterLink: A.unix_18
K1: Layer 6 [ 4:A.cache/Conn 10.070] is OK
K1: Layer 6 [ 8:B.unix/local 10.070] is OK
K1: Layer 6 [12:server/Server 10.070] is OK
K1: Layer 6 [20:D.dummy/Conn 10.070] is OK
K1: Layer 6 [ 1:main 10.070] OK
K3: Layer 8 [16:A.unix/CConn 6.052] Exiting
K1: Layer 6 [ 7:log/main 10.070] send next
K1: Layer 6 [ 2:main/L 10.070] OK L
K3: Layer 7 [16:A.unix/CConn 6.052] CloseGroup
K3: Layer 4 [19:A.unix/TGr 6.052] CloseGroup
K3: Layer 4 [ 1:main 6.053] check start
K3: Layer 4 [ 1:main 6.053] check end: want_up 1 some 1>1 all 1>1, going 0 up 2 down 0
K2: Layer 8 [25:tunnel/4.2.1 8.061] TUNNEL_ACK
K2: Layer 2 [23:router.pace_/router 8.075] delay done
K2: Layer 6 [22:log/router 8.075] send next
K2: Layer 6 [20:router/ConnC 8.075] sendNext called, send_more set
K2: Layer 6 [33:A.unix/ConnS 8.075] is OK
K2: Layer 6 [24:tunnel/ConnC 8.075] is OK
K2: Layer 6 [20:router/ConnC 8.075] is OK
K2: Layer 6 [12:A.unix/local 8.075] is OK
K2: Layer 6 [ 5:server/Server 8.075] is OK
K2: Layer 6 [16:B.ip/Conn 8.075] still waiting
K2: Layer 2 [19:ip.pace_/B.ip 8.076] delay done
K2: Layer 6 [18:log/B.ip 8.076] send next
K2: Layer 6 [16:B.ip/Conn 8.076] sendNext called, send_more set
K2: Layer 6 [33:A.unix/ConnS 8.076] is OK
K2: Layer 6 [24:tunnel/ConnC 8.076] is OK
K2: Layer 6 [20:router/ConnC 8.076] is OK
K2: Layer 6 [12:A.unix/local 8.076] is OK
K2: Layer 6 [ 5:server/Server 8.076] is OK
K2: Layer 6 [16:B.ip/Conn 8.076] is OK
K2: Layer 6 [ 1:main 8.076] OK
K2: Layer 6 [ 4:log/main 8.076] send next
K2: Layer 6 [ 2:main/L 8.076] OK L
+ echo xmit 1
xmit 1
+ knxtool groupswrite local:/tmp/fileZo5Uye 1/2/3 7
K1: Layer 8 [ 8:B.unix/local 11.082] New Connection
K1: Layer 8 [35:B.unix/CConn 11.083] ClientConnection Init
K1: Layer 3 [35:B.unix/CConn 11.083] Allocate 4.1.4
K1: Layer 7 [36:B.unix@4.1.4/Group 11.084] OpenGroup
K1: Layer 4 [38:B.unix/TGr 11.084] OpenGroup 1/2/3 WO
K1: Layer 0 [39:log/B.unix 11.084] State setup
K1: Layer 7 [36:B.unix@4.1.4/Group 11.085] OpenGroup complete
Send request
K1: Layer 3 [37:B.unix/ConnS 11.085] registerLink: 37:B.unix_37
K1: Layer 3 [37:B.unix/ConnS 11.085] Start: cfg:B.unix
K1: Layer 5 [37:B.unix/ConnS 11.086] down => >up
K1: Layer 5 [37:B.unix/ConnS 11.086] Starting
K1: Layer 0 [39:log/B.unix 11.086] State start
K1: Layer 0 [39:log/B.unix 11.086] State started
K1: Layer 5 [37:B.unix/ConnS 11.086] >up => up
K1: Layer 4 [37:B.unix/ConnS 11.086] up
K1: Layer 5 [37:B.unix/ConnS 11.086] Started
K1: Layer 4 [37:B.unix/ConnS 11.086] up
K1: Layer 4 [ 1:main 11.086] check start
K1: Layer 4 [ 1:main 11.086] check end: want_up 1 some 1>1 all 0>1, going 0 up 5 down 0
K1: Layer 7 [35:B.unix/CConn 11.086] recv Group(002): 00 87
K1: Layer 4 [38:B.unix/TGr 11.086] Recv Group T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K1: Layer 0 [39:log/B.unix 11.086] Recv L_Data low from 0.0.0 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K1: Layer 8 [37:B.unix/ConnS 11.086] found addr 4.1.4
K1: Layer 0 [ 7:log/main 11.086] Recv L_Data low from 4.1.4 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K1: Layer 0 [ 7:log/main 11.086] Send L_Data low from 4.1.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K1: Layer 6 [22:router/ConnC 11.086] sending, send_more clear
K1: Layer 0 [24:log/router 11.086] Send L_Data low from 4.1.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K1: Layer 2 [25:C.pace/router 11.086] out 1/2: delay for 0.202 sec
K1: Layer 6 [ 4:A.cache/Conn 11.086] sending, send_more clear
K1: Layer 0 [ 6:log/A.cache 11.086] Send L_Data low from 4.1.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K1: Layer 6 [ 6:log/A.cache 11.087] send next
K1: Layer 6 [ 4:A.cache/Conn 11.087] sendNext called, send_more set
K1: Layer 6 [ 1:main 11.087] sending set
K1: Layer 6 [20:D.dummy/Conn 11.087] sending, send_more clear
K1: Layer 6 [20:D.dummy/Conn 11.087] sendNext called, send_more set
K1: Layer 6 [ 1:main 11.087] sending set
K1: Layer 6 [22:router/ConnC 11.087] still waiting
K1: Layer 6 [ 1:main 11.087] wait L
K1: Layer 8 [35:B.unix/CConn 11.087] ClientConnection 4.1.4 closing
K1: Layer 3 [ 1:main 11.087] Release 4.1.4
K1: Layer 3 [37:B.unix/ConnS 11.087] unregisterLink: B.unix_37
K1: Layer 8 [35:B.unix/CConn 11.087] Exiting
K1: Layer 7 [35:B.unix/CConn 11.087] CloseGroup
K1: Layer 4 [38:B.unix/TGr 11.087] CloseGroup
K1: Layer 4 [ 1:main 11.087] check start
K1: Layer 4 [ 1:main 11.087] check end: want_up 1 some 1>1 all 1>1, going 0 up 5 down 0
K2: Layer 0 [18:log/B.ip 9.078] Recv L_Data low from 4.1.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K2: Layer 8 [ 1:main 9.078] unknown addr 4.1.4
K2: Layer 0 [ 4:log/main 9.079] Recv L_Data low from 4.1.4 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
+ sleep 1
K2: Layer 0 [ 4:log/main 9.079] Send L_Data low from 4.1.4 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K2: Layer 6 [33:A.unix/ConnS 9.080] sending, send_more clear
K2: Layer 0 [35:log/A.unix 9.080] Send L_Data low from 4.1.4 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K2: Layer 7 [31:A.unix/CConn 9.080] Recv(002): 00 87
K2: Layer 6 [35:log/A.unix 9.080] send next
K2: Layer 6 [33:A.unix/ConnS 9.080] sendNext called, send_more set
K2: Layer 6 [ 1:main 9.080] sending set
K2: Layer 6 [24:tunnel/ConnC 9.080] sending, send_more clear
K2: Layer 6 [24:tunnel/ConnC 9.080] sendNext called, send_more set
K2: Layer 6 [ 1:main 9.080] sending set
K2: Layer 6 [20:router/ConnC 9.080] sending, send_more clear
K2: Layer 0 [22:log/router 9.080] Send L_Data low from 4.1.4 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K2: Layer 2 [23:router.pace_/router 9.080] out 1/2: delay for 0.017 sec
K2: Layer 6 [33:A.unix/ConnS 9.080] is OK
K2: Layer 6 [24:tunnel/ConnC 9.080] is OK
K2: Layer 6 [20:router/ConnC 9.080] still waiting
K2: Layer 6 [ 1:main 9.080] wait L
K2: Layer 0 [26:log/tunnel 9.080] Send L_Data low from 4.1.4 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K3: Layer 0 [11:log/B.ipt 7.072] Recv L_Data low from 4.1.4 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K3: Layer 8 [ 1:main 7.073] unknown addr 4.1.4
K3: Layer 0 [ 4:log/main 7.073] Recv L_Data low from 4.1.4 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K3: Layer 0 [ 4:log/main 7.073] Send L_Data low from 4.1.4 to 1/2/3 hops: 03 T_DATA_XXX_REQ A_GroupValue_Write (small) 07
K3: Layer 6 [ 9:B.ipt/Conn 7.073] is OK
K3: Layer 6 [ 5:A.unix/local 7.073] is OK
K3: Layer 6 [ 1:main 7.073] OK
K3: Layer 6 [ 4:log/main 7.073] send next
K3: Layer 6 [ 2:main/L 7.073] OK L
K2: Layer 8 [25:tunnel/4.2.1 9.081] TUNNEL_ACK
K2: Layer 6 [26:log/tunnel 9.081] send next
K2: Layer 2 [23:router.pace_/router 9.096] delay done
K2: Layer 6 [22:log/router 9.097] send next
K2: Layer 6 [20:router/ConnC 9.097] sendNext called, send_more set
K2: Layer 6 [33:A.unix/ConnS 9.097] is OK
K2: Layer 6 [24:tunnel/ConnC 9.097] is OK
K2: Layer 6 [20:router/ConnC 9.097] is OK
K2: Layer 6 [12:A.unix/local 9.097] is OK
K2: Layer 6 [ 5:server/Server 9.097] is OK
K2: Layer 6 [16:B.ip/Conn 9.097] is OK
K2: Layer 6 [ 1:main 9.097] OK
K2: Layer 6 [ 4:log/main 9.097] send next
K2: Layer 6 [ 2:main/L 9.097] OK L
K1: Layer 2 [25:C.pace/router 11.288] in 2/2: delay more, for 0.302 sec
K1: Layer 2 [25:C.pace/router 11.590] delay done
K1: Layer 6 [24:log/router 11.590] send next
K1: Layer 6 [22:router/ConnC 11.590] sendNext called, send_more set
K1: Layer 6 [22:router/ConnC 11.590] is OK
K1: Layer 6 [ 4:A.cache/Conn 11.590] is OK
K1: Layer 6 [ 8:B.unix/local 11.590] is OK
K1: Layer 6 [12:server/Server 11.591] is OK
K1: Layer 6 [20:D.dummy/Conn 11.591] is OK
K1: Layer 6 [ 1:main 11.591] OK
K1: Layer 6 [ 7:log/main 11.591] send next
K1: Layer 6 [ 2:main/L 11.591] OK L
+ echo xmit 3
xmit 3
+ knxtool groupswrite local:/tmp/filedokFdg 1/2/3 8
K3: Layer 8 [ 5:A.unix/local 8.086] New Connection
K3: Layer 8 [21:A.unix/CConn 8.086] ClientConnection Init
K3: Layer 3 [21:A.unix/CConn 8.087] Allocate 4.3.3
K3: Layer 7 [22:A.unix@4.3.3/Group 8.087] OpenGroup
K3: Layer 4 [24:A.unix/TGr 8.088] OpenGroup 1/2/3 WO
K3: Layer 0 [25:log/A.unix 8.088] State setup
K3: Layer 7 [22:A.unix@4.3.3/Group 8.088] OpenGroup complete
Send request
K3: Layer 3 [23:A.unix/ConnS 8.089] registerLink: 23:A.unix_23
K3: Layer 3 [23:A.unix/ConnS 8.089] Start: cfg:A.unix
K3: Layer 5 [23:A.unix/ConnS 8.089] down => >up
K3: Layer 5 [23:A.unix/ConnS 8.089] Starting
K3: Layer 0 [25:log/A.unix 8.089] State start
K3: Layer 0 [25:log/A.unix 8.089] State started
K3: Layer 5 [23:A.unix/ConnS 8.089] >up => up
K3: Layer 4 [23:A.unix/ConnS 8.089] up
K3: Layer 5 [23:A.unix/ConnS 8.089] Started
K3: Layer 4 [23:A.unix/ConnS 8.089] up
K3: Layer 4 [ 1:main 8.089] check start
K3: Layer 4 [ 1:main 8.089] check end: want_up 1 some 1>1 all 0>1, going 0 up 2 down 0
K3: Layer 7 [21:A.unix/CConn 8.089] recv Group(002): 00 88
K3: Layer 4 [24:A.unix/TGr 8.089] Recv Group T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K3: Layer 0 [25:log/A.unix 8.089] Recv L_Data low from 0.0.0 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K3: Layer 8 [23:A.unix/ConnS 8.089] found addr 4.3.3
K3: Layer 0 [ 4:log/main 8.089] Recv L_Data low from 4.3.3 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K3: Layer 0 [ 4:log/main 8.090] Send L_Data low from 4.3.3 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K3: Layer 6 [ 9:B.ipt/Conn 8.090] sending, send_more clear
K3: Layer 6 [ 9:B.ipt/Conn 8.090] sendNext called, send_more set
K3: Layer 6 [ 1:main 8.090] sending set
K3: Layer 6 [23:A.unix/ConnS 8.090] is OK
K3: Layer 6 [ 9:B.ipt/Conn 8.090] is OK
K3: Layer 6 [ 5:A.unix/local 8.090] is OK
K3: Layer 6 [ 1:main 8.090] OK
K3: Layer 6 [ 4:log/main 8.090] send next
K3: Layer 6 [ 2:main/L 8.090] OK L
K3: Layer 0 [11:log/B.ipt 8.090] Send L_Data low from 4.3.3 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K2: Layer 8 [25:tunnel/4.2.1 10.098] TUNNEL_REQ
K3: Layer 8 [21:A.unix/CConn 8.090] ClientConnection 4.3.3 closing
K3: Layer 3 [ 1:main 8.090] Release 4.3.3
K3: Layer 3 [23:A.unix/ConnS 8.090] unregisterLink: A.unix_23
K3: Layer 8 [21:A.unix/CConn 8.090] Exiting
K3: Layer 7 [21:A.unix/CConn 8.090] CloseGroup
K2: Layer 0 [26:log/tunnel 10.098] Recv L_Data low from 4.3.3 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K3: Layer 4 [24:A.unix/TGr 8.090] CloseGroup
K2: Layer 8 [ 1:main 10.099] unknown addr 4.3.3
K3: Layer 4 [ 1:main 8.091] check start
K3: Layer 4 [ 1:main 8.091] check end: want_up 1 some 1>1 all 1>1, going 0 up 2 down 0
K2: Layer 0 [ 4:log/main 10.099] Recv L_Data low from 4.3.3 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K2: Layer 0 [ 4:log/main 10.099] Send L_Data low from 4.3.3 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K2: Layer 6 [33:A.unix/ConnS 10.099] sending, send_more clear
K2: Layer 0 [35:log/A.unix 10.099] Send L_Data low from 4.3.3 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K2: Layer 7 [31:A.unix/CConn 10.099] Recv(002): 00 88
K2: Layer 6 [35:log/A.unix 10.099] send next
K2: Layer 6 [33:A.unix/ConnS 10.099] sendNext called, send_more set
K2: Layer 6 [ 1:main 10.099] sending set
K2: Layer 6 [20:router/ConnC 10.100] sending, send_more clear
K2: Layer 0 [22:log/router 10.100] Send L_Data low from 4.3.3 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K2: Layer 2 [23:router.pace_/router 10.100] out 1/2: delay for 0.017 sec
K2: Layer 6 [16:B.ip/Conn 10.100] sending, send_more clear
K2: Layer 0 [18:log/B.ip 10.100] Send L_Data low from 4.3.3 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K2: Layer 2 [19:ip.pace_/B.ip 10.100] out 1/2: delay for 0.017 sec
K2: Layer 6 [33:A.unix/ConnS 10.100] is OK
+ sleep 1
K2: Layer 6 [24:tunnel/ConnC 10.100] is OK
K2: Layer 6 [20:router/ConnC 10.100] still waiting
K2: Layer 6 [ 1:main 10.100] wait L
K3: Layer 6 [11:log/B.ipt 8.093] send next
K1: Layer 0 [24:log/router 12.110] Recv L_Data low from 4.3.3 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K1: Layer 8 [ 1:main 12.111] unknown addr 4.3.3
K1: Layer 0 [ 7:log/main 12.111] Recv L_Data low from 4.3.3 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K1: Layer 0 [ 7:log/main 12.111] Send L_Data low from 4.3.3 to 1/2/3 hops: 03 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K1: Layer 6 [ 4:A.cache/Conn 12.111] sending, send_more clear
K1: Layer 0 [ 6:log/A.cache 12.111] Send L_Data low from 4.3.3 to 1/2/3 hops: 03 T_DATA_XXX_REQ A_GroupValue_Write (small) 08
K1: Layer 6 [ 6:log/A.cache 12.111] send next
K1: Layer 6 [ 4:A.cache/Conn 12.111] sendNext called, send_more set
K1: Layer 6 [ 1:main 12.111] sending set
K1: Layer 6 [20:D.dummy/Conn 12.111] sending, send_more clear
K1: Layer 6 [20:D.dummy/Conn 12.111] sendNext called, send_more set
K1: Layer 6 [ 1:main 12.112] sending set
K1: Layer 6 [22:router/ConnC 12.112] is OK
K1: Layer 6 [ 4:A.cache/Conn 12.112] is OK
K1: Layer 6 [ 8:B.unix/local 12.112] is OK
K1: Layer 6 [12:server/Server 12.112] is OK
K1: Layer 6 [20:D.dummy/Conn 12.112] is OK
K1: Layer 6 [ 1:main 12.112] OK
K1: Layer 6 [ 7:log/main 12.112] send next
K1: Layer 6 [ 2:main/L 12.112] OK L
K2: Layer 8 [25:tunnel/4.2.1 10.102] TUNNEL_ACK
K2: Layer 2 [23:router.pace_/router 10.116] delay done
K2: Layer 6 [22:log/router 10.116] send next
K2: Layer 6 [20:router/ConnC 10.116] sendNext called, send_more set
K2: Layer 6 [33:A.unix/ConnS 10.116] is OK
K2: Layer 6 [24:tunnel/ConnC 10.116] is OK
K2: Layer 6 [20:router/ConnC 10.116] is OK
K2: Layer 6 [12:A.unix/local 10.116] is OK
K2: Layer 6 [ 5:server/Server 10.116] is OK
K2: Layer 6 [16:B.ip/Conn 10.116] still waiting
K2: Layer 2 [19:ip.pace_/B.ip 10.116] in 1/2: delay more, for 0.013 sec
K2: Layer 2 [19:ip.pace_/B.ip 10.129] delay done
K2: Layer 6 [18:log/B.ip 10.129] send next
K2: Layer 6 [16:B.ip/Conn 10.129] sendNext called, send_more set
K2: Layer 6 [33:A.unix/ConnS 10.129] is OK
K2: Layer 6 [24:tunnel/ConnC 10.129] is OK
K2: Layer 6 [20:router/ConnC 10.129] is OK
K2: Layer 6 [12:A.unix/local 10.129] is OK
K2: Layer 6 [ 5:server/Server 10.129] is OK
K2: Layer 6 [16:B.ip/Conn 10.129] is OK
K2: Layer 6 [ 1:main 10.129] OK
K2: Layer 6 [ 4:log/main 10.129] send next
K2: Layer 6 [ 2:main/L 10.129] OK L
+ echo xmit 2
xmit 2
+ knxtool groupwrite local:/tmp/file3x5LCc 1/2/3 4 5 6
K2: Layer 8 [12:A.unix/local 11.114] New Connection
K2: Layer 8 [41:A.unix/CConn 11.114] ClientConnection Init
K2: Layer 3 [41:A.unix/CConn 11.114] Allocate 4.2.5
K2: Layer 7 [42:A.unix@4.2.5/Group 11.114] OpenGroup
K2: Layer 4 [44:A.unix/TGr 11.114] OpenGroup 1/2/3 WO
K2: Layer 0 [45:log/A.unix 11.114] State setup
K2: Layer 7 [42:A.unix@4.2.5/Group 11.114] OpenGroup complete
K2: Layer 3 [43:A.unix/ConnS 11.114] registerLink: 43:A.unix_43
Send request
K2: Layer 3 [43:A.unix/ConnS 11.114] Start: cfg:A.unix
K2: Layer 5 [43:A.unix/ConnS 11.114] down => >up
K2: Layer 5 [43:A.unix/ConnS 11.114] Starting
K2: Layer 0 [45:log/A.unix 11.114] State start
K2: Layer 0 [45:log/A.unix 11.114] State started
K2: Layer 5 [43:A.unix/ConnS 11.114] >up => up
K2: Layer 4 [43:A.unix/ConnS 11.114] up
K2: Layer 5 [43:A.unix/ConnS 11.114] Started
K2: Layer 4 [43:A.unix/ConnS 11.114] up
K2: Layer 4 [ 1:main 11.114] check start
K2: Layer 4 [ 1:main 11.114] check end: want_up 1 some 1>1 all 0>1, going 0 up 4 down 0
K2: Layer 7 [41:A.unix/CConn 11.115] recv Group(005): 00 80 04 05 06
K2: Layer 4 [44:A.unix/TGr 11.115] Recv Group T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K2: Layer 0 [45:log/A.unix 11.115] Recv L_Data low from 0.0.0 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K2: Layer 8 [43:A.unix/ConnS 11.115] found addr 4.2.5
K2: Layer 0 [ 4:log/main 11.115] Recv L_Data low from 4.2.5 to 1/2/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K2: Layer 0 [ 4:log/main 11.115] Send L_Data low from 4.2.5 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K2: Layer 6 [33:A.unix/ConnS 11.115] sending, send_more clear
K2: Layer 0 [35:log/A.unix 11.115] Send L_Data low from 4.2.5 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K2: Layer 7 [31:A.unix/CConn 11.115] Recv(005): 00 80 04 05 06
K2: Layer 6 [35:log/A.unix 11.115] send next
K2: Layer 6 [33:A.unix/ConnS 11.115] sendNext called, send_more set
K2: Layer 6 [ 1:main 11.115] sending set
K2: Layer 6 [24:tunnel/ConnC 11.115] sending, send_more clear
K2: Layer 6 [24:tunnel/ConnC 11.115] sendNext called, send_more set
K2: Layer 6 [ 1:main 11.115] sending set
+ sleep 1
K2: Layer 6 [20:router/ConnC 11.116] sending, send_more clear
K2: Layer 0 [22:log/router 11.116] Send L_Data low from 4.2.5 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K2: Layer 2 [23:router.pace_/router 11.116] out 1/5: delay for 0.020 sec
K2: Layer 6 [16:B.ip/Conn 11.116] sending, send_more clear
K2: Layer 0 [18:log/B.ip 11.116] Send L_Data low from 4.2.5 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K2: Layer 2 [19:ip.pace_/B.ip 11.116] out 1/5: delay for 0.020 sec
K2: Layer 6 [43:A.unix/ConnS 11.116] is OK
K2: Layer 6 [33:A.unix/ConnS 11.116] is OK
K2: Layer 6 [24:tunnel/ConnC 11.116] is OK
K2: Layer 6 [20:router/ConnC 11.116] still waiting
K2: Layer 6 [ 1:main 11.116] wait L
K2: Layer 8 [41:A.unix/CConn 11.116] ClientConnection 4.2.5 closing
K2: Layer 3 [ 1:main 11.116] Release 4.2.5
K2: Layer 3 [43:A.unix/ConnS 11.116] unregisterLink: A.unix_43
K2: Layer 8 [41:A.unix/CConn 11.116] Exiting
K2: Layer 7 [41:A.unix/CConn 11.116] CloseGroup
K2: Layer 4 [44:A.unix/TGr 11.116] CloseGroup
K2: Layer 4 [ 1:main 11.116] check start
K2: Layer 4 [ 1:main 11.117] check end: want_up 1 some 1>1 all 1>1, going 0 up 4 down 0
K2: Layer 0 [26:log/tunnel 11.117] Send L_Data low from 4.2.5 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K3: Layer 0 [11:log/B.ipt 9.109] Recv L_Data low from 4.2.5 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K1: Layer 0 [24:log/router 13.127] Recv L_Data low from 4.2.5 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K3: Layer 8 [ 1:main 9.109] unknown addr 4.2.5
K1: Layer 8 [ 1:main 13.127] unknown addr 4.2.5
K1: Layer 0 [ 7:log/main 13.127] Recv L_Data low from 4.2.5 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K3: Layer 0 [ 4:log/main 9.109] Recv L_Data low from 4.2.5 to 1/2/3 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K1: Layer 0 [ 7:log/main 13.127] Send L_Data low from 4.2.5 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K1: Layer 6 [ 4:A.cache/Conn 13.127] sending, send_more clear
K1: Layer 0 [ 6:log/A.cache 13.127] Send L_Data low from 4.2.5 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K1: Layer 6 [ 6:log/A.cache 13.127] send next
K1: Layer 6 [ 4:A.cache/Conn 13.128] sendNext called, send_more set
K1: Layer 6 [ 1:main 13.128] sending set
K1: Layer 6 [20:D.dummy/Conn 13.128] sending, send_more clear
K1: Layer 6 [20:D.dummy/Conn 13.128] sendNext called, send_more set
K1: Layer 6 [ 1:main 13.128] sending set
K1: Layer 6 [22:router/ConnC 13.128] is OK
K1: Layer 6 [ 4:A.cache/Conn 13.128] is OK
K1: Layer 6 [ 8:B.unix/local 13.128] is OK
K1: Layer 6 [12:server/Server 13.128] is OK
K1: Layer 6 [20:D.dummy/Conn 13.128] is OK
K1: Layer 6 [ 1:main 13.128] OK
K1: Layer 6 [ 7:log/main 13.128] send next
K1: Layer 6 [ 2:main/L 13.128] OK L
K3: Layer 0 [ 4:log/main 9.110] Send L_Data low from 4.2.5 to 1/2/3 hops: 04 T_DATA_XXX_REQ A_GroupValue_Write 04 05 06
K3: Layer 6 [ 9:B.ipt/Conn 9.110] is OK
K3: Layer 6 [ 5:A.unix/local 9.110] is OK
K3: Layer 6 [ 1:main 9.110] OK
K3: Layer 6 [ 4:log/main 9.110] send next
K3: Layer 6 [ 2:main/L 9.110] OK L
K2: Layer 8 [25:tunnel/4.2.1 11.119] TUNNEL_ACK
K2: Layer 6 [26:log/tunnel 11.119] send next
K2: Layer 2 [23:router.pace_/router 11.135] delay done
K2: Layer 6 [22:log/router 11.135] send next
K2: Layer 6 [20:router/ConnC 11.135] sendNext called, send_more set
K2: Layer 6 [33:A.unix/ConnS 11.135] is OK
K2: Layer 6 [24:tunnel/ConnC 11.135] is OK
K2: Layer 6 [20:router/ConnC 11.135] is OK
K2: Layer 6 [12:A.unix/local 11.135] is OK
K2: Layer 6 [ 5:server/Server 11.135] is OK
K2: Layer 6 [16:B.ip/Conn 11.135] still waiting
K2: Layer 2 [19:ip.pace_/B.ip 11.135] delay done
K2: Layer 6 [18:log/B.ip 11.135] send next
K2: Layer 6 [16:B.ip/Conn 11.135] sendNext called, send_more set
K2: Layer 6 [33:A.unix/ConnS 11.135] is OK
K2: Layer 6 [24:tunnel/ConnC 11.135] is OK
K2: Layer 6 [20:router/ConnC 11.135] is OK
K2: Layer 6 [12:A.unix/local 11.135] is OK
K2: Layer 6 [ 5:server/Server 11.135] is OK
K2: Layer 6 [16:B.ip/Conn 11.135] is OK
K2: Layer 6 [ 1:main 11.135] OK
K2: Layer 6 [ 4:log/main 11.135] send next
K2: Layer 6 [ 2:main/L 11.135] OK L
+ kill 24902
tools/test.sh: Zeile 119: kill: (24902) - Kein passender Prozess gefunden
+ true
+ knxtool groupcacheread local:/tmp/fileZo5Uye 1/2/3
K1: Layer 8 [ 8:B.unix/local 14.143] New Connection
K1: Layer 8 [40:B.unix/CConn 14.144] ClientConnection Init
K1: Layer 3 [40:B.unix/CConn 14.144] Allocate 4.1.5
K1: Layer 4 [ 5:A.cache/G 14.145] GroupCacheRead 1/2/3 0 0
K1: Layer 4 [ 5:A.cache/G 14.145] GroupCache found: 4.2.5
K1: Layer 8 [40:B.unix/CConn 14.146] ClientConnection 4.1.5 closing
K1: Layer 3 [ 1:main 14.146] Release 4.1.5
+ knxtool groupcachelastupdates local:/tmp/fileZo5Uye 3 1
K1: Layer 8 [ 8:B.unix/local 14.153] New Connection
K1: Layer 8 [41:B.unix/CConn 14.154] ClientConnection Init
K1: Layer 3 [41:B.unix/CConn 14.154] Allocate 4.1.2
K1: Layer 8 [ 5:A.cache/G 15.155] LastUpdates start: x3 pos: x6
K1: Layer 8 [41:B.unix/CConn 15.158] ClientConnection 4.1.2 closing
K1: Layer 3 [ 1:main 15.158] Release 4.1.2
+ kill 24887 24890 24894
+ sleep 1
K2: N00000000: [ 1:main] Shutting down.
K3: N00000000: [ 1:main] Shutting down.
K2: Layer 4 [ 1:main 13.150] trigger Going down
K3: Layer 4 [ 1:main 11.142] trigger Going down
K2: Layer 0 [ 4:log/main 13.150] State stop
K3: Layer 0 [ 4:log/main 11.142] State stop
K2: Layer 4 [33:A.unix/ConnS 13.150] Stopping
K3: Layer 4 [ 9:B.ipt/Conn 11.142] Stopping
K2: Layer 5 [33:A.unix/ConnS 13.150] up => >down
K3: Layer 5 [ 9:B.ipt/Conn 11.142] up => >down
K2: Layer 5 [33:A.unix/ConnS 13.150] Stopping
K3: Layer 5 [ 9:B.ipt/Conn 11.142] Stopping
K2: Layer 0 [35:log/A.unix 13.150] State stop
K3: Layer 0 [11:log/B.ipt 11.142] State stop
K2: Layer 0 [35:log/A.unix 13.150] State stopped
K2: Layer 5 [33:A.unix/ConnS 13.150] >down => down
K2: Layer 4 [33:A.unix/ConnS 13.150] down
K3: Layer 0 [11:log/B.ipt 11.142] State stopped
K1: N00000000: [ 1:main] Shutting down.
K1: Layer 4 [ 1:main 15.160] trigger Going down
K3: Layer 5 [ 9:B.ipt/Conn 11.142] >down => down
K2: Layer 4 [33:A.unix/ConnS 13.150] down
K2: Layer 4 [24:tunnel/ConnC 13.150] Stopping
K3: Layer 4 [ 9:B.ipt/Conn 11.142] down
K1: Layer 0 [ 7:log/main 15.160] State stop
K1: Layer 4 [22:router/ConnC 15.160] Stopping
K3: Layer 4 [ 9:B.ipt/Conn 11.143] down
K2: Layer 5 [24:tunnel/ConnC 13.151] up => >down
K2: Layer 5 [24:tunnel/ConnC 13.151] Stopping
K3: Layer 4 [ 5:A.unix/local 11.143] Stopping
K1: Layer 5 [22:router/ConnC 15.160] up => >down
K1: Layer 5 [22:router/ConnC 15.161] Stopping
K3: Layer 5 [ 5:A.unix/local 11.143] up => >down
K2: Layer 0 [26:log/tunnel 13.151] State stop
K2: Layer 8 [25:tunnel/4.2.1 13.151] Stop Conn 1
K2: Layer 3 [ 1:main 13.151] Release 4.2.1
K2: Layer 0 [26:log/tunnel 13.151] State stopped
K2: Layer 5 [24:tunnel/ConnC 13.151] >down => down
K2: Layer 4 [24:tunnel/ConnC 13.151] down
K2: Layer 4 [24:tunnel/ConnC 13.151] down
K2: Layer 4 [20:router/ConnC 13.151] Stopping
K2: Layer 5 [20:router/ConnC 13.151] up => >down
K2: Layer 5 [20:router/ConnC 13.151] Stopping
K2: Layer 0 [22:log/router 13.151] State stop
K2: Layer 0 [22:log/router 13.151] State stopped
K2: Layer 5 [20:router/ConnC 13.151] >down => down
K2: Layer 4 [20:router/ConnC 13.151] down
K2: Layer 4 [20:router/ConnC 13.151] down
K2: Layer 4 [12:A.unix/local 13.151] Stopping
K3: Layer 8 [ 5:A.unix/local 11.143] StopServer
K1: Layer 0 [24:log/router 15.161] State stop
K1: Layer 0 [24:log/router 15.161] State stopped
K3: Layer 8 [13:A.unix/CConn 11.143] ClientConnection 4.3.1 closing
K2: Layer 5 [12:A.unix/local 13.151] up => >down
K3: Layer 3 [ 1:main 11.144] Release 4.3.1
K3: Layer 3 [ 1:main 11.144] deregisterVBusmonitor
K2: Layer 8 [12:A.unix/local 13.152] StopServer
K3: Layer 8 [13:A.unix/CConn 11.144] Exiting
K1: Layer 5 [22:router/ConnC 15.161] >down => down
K3: Layer 7 [15:A.unix/TBusMon 11.144] Close A_Busmonitor
K2: Layer 8 [28:A.unix/CConn 13.152] ClientConnection 4.2.2 closing
K2: Layer 3 [ 1:main 13.152] Release 4.2.2
K2: Layer 3 [ 1:main 13.152] deregisterVBusmonitor
K2: Layer 8 [28:A.unix/CConn 13.152] Exiting
K2: Layer 7 [30:A.unix/TBusMon 13.152] Close A_Busmonitor
K2: Layer 8 [31:A.unix/CConn 13.152] ClientConnection 4.2.3 closing
K2: Layer 3 [ 1:main 13.152] Release 4.2.3
K3: Layer 5 [ 5:A.unix/local 11.144] >down => down
K1: Layer 4 [22:router/ConnC 15.161] down
K3: Layer 4 [ 5:A.unix/local 11.144] down
K2: Layer 3 [33:A.unix/ConnS 13.152] unregisterLink: A.unix_33
K2: Layer 8 [31:A.unix/CConn 13.152] Exiting
K3: Layer 4 [ 5:A.unix/local 11.144] down
K1: Layer 4 [22:router/ConnC 15.162] down
K1: Layer 4 [ 4:A.cache/Conn 15.162] Stopping
K1: Layer 5 [ 4:A.cache/Conn 15.162] up => >down
K1: Layer 5 [ 4:A.cache/Conn 15.162] Stopping
K3: Layer 4 [ 1:main 11.144] check start
K2: Layer 7 [31:A.unix/CConn 13.152] CloseGroup
K2: Layer 0 [35:log/A.unix 13.152] State stopped
K3: Layer 4 [ 9:B.ipt/Conn 11.144] is down
K3: Layer 4 [ 5:A.unix/local 11.144] is down
K3: Layer 4 [ 1:main 11.145] check end: want_up 0 some 1>0 all 0>0, going 0 up 0 down 2
K3: Layer 0 [ 4:log/main 11.145] State stopped
K3: Layer 4 [ 1:main 11.145] down
K3: Layer 4 [ 1:main 11.145] deleting
K3: Layer 2 [10:B.ipt/ipt 11.145] Close
K3: Layer 4 [ 1:main 11.145] deleted.
K1: Layer 0 [ 6:log/A.cache 15.162] State stop
K2: Layer 5 [12:A.unix/local 13.153] >down => down
K2: Layer 4 [12:A.unix/local 13.154] down
K2: Layer 4 [12:A.unix/local 13.155] down
K2: Layer 4 [ 5:server/Server 13.155] Stopping
K2: Layer 5 [ 5:server/Server 13.155] up => >down
K2: Layer 8 [25:tunnel/4.2.1 13.155] Stop Conn 1
K2: Layer 0 [26:log/tunnel 13.155] State stopped
K2: Layer 5 [20:router/ConnC 13.155] Stopping
K2: Layer 0 [22:log/router 13.155] State stop
K2: Layer 0 [22:log/router 13.155] State stopped
K2: Layer 3 [20:router/ConnC 13.155] unregisterLink: router_20
K2: Layer 5 [ 5:server/Server 13.155] >down => down
K2: Layer 4 [ 5:server/Server 13.155] down
K2: Layer 4 [ 5:server/Server 13.155] down
K2: Layer 4 [16:B.ip/Conn 13.156] Stopping
K2: Layer 5 [16:B.ip/Conn 13.156] up => >down
K2: Layer 5 [16:B.ip/Conn 13.156] Stopping
K2: Layer 0 [18:log/B.ip 13.156] State stop
K2: Layer 0 [18:log/B.ip 13.156] State stopped
K2: Layer 5 [16:B.ip/Conn 13.156] >down => down
K2: Layer 4 [16:B.ip/Conn 13.156] down
K2: Layer 4 [16:B.ip/Conn 13.156] down
K2: Layer 4 [ 1:main 13.156] check start
K2: Layer 4 [34:A.unix/TGr 13.156] CloseGroup
K2: Layer 8 [21:router/driver 13.156] CloseD
K2: Layer 4 [12:A.unix/local 13.156] is down
K2: Layer 4 [ 5:server/Server 13.156] is down
K2: Layer 4 [16:B.ip/Conn 13.157] is down
K2: Layer 4 [ 1:main 13.157] check end: want_up 0 some 1>0 all 0>0, going 0 up 0 down 3
K2: Layer 0 [ 4:log/main 13.157] State stopped
K2: Layer 4 [ 1:main 13.157] down
K2: Layer 4 [ 1:main 13.157] deleting
K2: Layer 2 [17:B.ip/ip 13.157] Destroy
K2: Layer 4 [ 1:main 13.157] deleted.
K1: Layer 0 [ 6:log/A.cache 15.168] State stopped
K1: Layer 5 [ 4:A.cache/Conn 15.168] >down => down
K1: Layer 4 [ 4:A.cache/Conn 15.168] down
K1: Layer 4 [ 4:A.cache/Conn 15.168] down
K1: Layer 4 [ 8:B.unix/local 15.168] Stopping
K1: Layer 5 [ 8:B.unix/local 15.168] up => >down
K1: Layer 8 [ 8:B.unix/local 15.168] StopServer
K1: Layer 8 [26:B.unix/CConn 15.168] ClientConnection 4.1.1 closing
K1: Layer 3 [ 1:main 15.168] Release 4.1.1
K1: Layer 3 [ 1:main 15.168] deregisterVBusmonitor
K1: Layer 8 [26:B.unix/CConn 15.168] Exiting
K1: Layer 7 [28:B.unix/TBusMon 15.168] Close A_Busmonitor
K1: Layer 5 [ 8:B.unix/local 15.168] >down => down
K1: Layer 4 [ 8:B.unix/local 15.168] down
K1: Layer 4 [ 8:B.unix/local 15.168] down
K1: Layer 4 [12:server/Server 15.168] Stopping
K1: Layer 5 [12:server/Server 15.168] up => >down
K1: Layer 5 [22:router/ConnC 15.169] Stopping
K1: Layer 0 [24:log/router 15.169] State stop
K1: Layer 0 [24:log/router 15.169] State stopped
K1: Layer 3 [22:router/ConnC 15.169] unregisterLink: router_22
K1: Layer 5 [12:server/Server 15.169] >down => down
K1: Layer 4 [12:server/Server 15.169] down
K1: Layer 4 [12:server/Server 15.169] down
K1: Layer 4 [20:D.dummy/Conn 15.169] Stopping
K1: Layer 5 [20:D.dummy/Conn 15.169] up => >down
K1: Layer 5 [20:D.dummy/Conn 15.169] Stopping
K1: Layer 5 [20:D.dummy/Conn 15.169] >down => down
K1: Layer 4 [20:D.dummy/Conn 15.169] down
K1: Layer 4 [20:D.dummy/Conn 15.169] down
K1: Layer 4 [ 1:main 15.169] check start
K1: Layer 8 [23:router/driver 15.169] CloseD
K1: Layer 4 [ 4:A.cache/Conn 15.169] is down
K1: Layer 4 [ 8:B.unix/local 15.169] is down
K1: Layer 4 [12:server/Server 15.169] is down
K1: Layer 4 [20:D.dummy/Conn 15.169] is down
K1: Layer 4 [ 1:main 15.169] check end: want_up 0 some 1>0 all 0>0, going 0 up 0 down 4
K1: Layer 0 [ 7:log/main 15.169] State stopped
K1: Layer 4 [ 1:main 15.169] down
K1: Layer 4 [ 1:main 15.169] deleting
K1: Layer 4 [ 5:A.cache/G 15.169] GroupCacheDestroy
K1: Layer 4 [ 5:A.cache/G 15.169] GroupCacheClear
K1: Layer 8 [12:server/Server 15.169] Close
K1: Layer 4 [ 1:main 15.169] deleted.
+ kill 24897 24898 24899 24900
tools/test.sh: Zeile 127: kill: (24897) - Kein passender Prozess gefunden
tools/test.sh: Zeile 127: kill: (24898) - Kein passender Prozess gefunden
tools/test.sh: Zeile 127: kill: (24899) - Kein passender Prozess gefunden
tools/test.sh: Zeile 127: kill: (24900) - Kein passender Prozess gefunden
+ true
+ trap 'echo T3; rm -f $L1 $L2 $L3 $L4 $L5 $E1 $E2 $E3 $E4 $E5 $EF' 0 1 2
+ sleep 1
+ sed -e 's/^/E vbusmonitor 1: /'
E vbusmonitor 1: Read failed: Connection reset by peer
+ sed -e 's/^/E vbusmonitor 2: /'
E vbusmonitor 2: Read failed: Connection reset by peer
+ sed -e 's/^/E vbusmonitor 3: /'
E vbusmonitor 3: Read failed: Connection reset by peer
+ sed -e 's/^/E groupcacheread: /'
E groupcacheread: Read failed: No such file or directory
+ sed -e 's/^/E grouplisten: /'
E grouplisten: Read failed: Connection reset by peer
+ E=
++ dirname tools/test.sh
+ diff -u tools/logs/monitor1 /tmp/fileNt69of
++ dirname tools/test.sh
+ diff -u tools/logs/monitor2 /tmp/fileI4W2Uf
++ dirname tools/test.sh
+ diff -u tools/logs/monitor3 /tmp/filexWnpPi
++ dirname tools/test.sh
+ diff -u tools/logs/cache /tmp/fileu82Vsi
++ dirname tools/test.sh
+ diff -u tools/logs/listen /tmp/filehR1hXi
+ test -z ''
+ set +ex
DONE OK
make[1]: Verzeichnis „/home/pi/knxd“ wird verlassen
create-stamp debian/debhelper-build-stamp
fakeroot debian/rules binary
dh binary
dh_testroot
dh_prep
rm -f debian/knxd.substvars
rm -f debian/knxd.*.debhelper
rm -rf debian/knxd/
rm -f debian/knxd-tools.substvars
rm -f debian/knxd-tools.*.debhelper
rm -rf debian/knxd-tools/
rm -f debian/knxd-dev.substvars
rm -f debian/knxd-dev.*.debhelper
rm -rf debian/knxd-dev/
dh_auto_install
install -d debian/knxd
install -d debian/knxd-tools
install -d debian/knxd-dev
make -j4 install DESTDIR=/home/pi/knxd/debian/tmp AM_UPDATE_INFO_DIR=no
make[1]: Verzeichnis „/home/pi/knxd“ wird betreten
echo "#define REAL_VERSION \"0.14.18:5e707fd\"" >>version.h.new
cmp -s version.h.new version.h && rm version.h.new || mv version.h.new version.h
make install-recursive
make[2]: Verzeichnis „/home/pi/knxd“ wird betreten
Making install in .
make[3]: Verzeichnis „/home/pi/knxd“ wird betreten
make[4]: Verzeichnis „/home/pi/knxd“ wird betreten
make[4]: Für das Ziel „install-exec-am“ ist nichts zu tun.
make[4]: Für das Ziel „install-data-am“ ist nichts zu tun.
make[4]: Verzeichnis „/home/pi/knxd“ wird verlassen
make[3]: Verzeichnis „/home/pi/knxd“ wird verlassen
Making install in src
make[3]: Verzeichnis „/home/pi/knxd/src“ wird betreten
Making install in common
make[4]: Verzeichnis „/home/pi/knxd/src/common“ wird betreten
make[5]: Verzeichnis „/home/pi/knxd/src/common“ wird betreten
make[5]: Für das Ziel „install-exec-am“ ist nichts zu tun.
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/include'
/usr/bin/install -c -m 644 eibloadresult.h '/home/pi/knxd/debian/tmp/usr/include'
make[5]: Verzeichnis „/home/pi/knxd/src/common“ wird verlassen
make[4]: Verzeichnis „/home/pi/knxd/src/common“ wird verlassen
Making install in include
make[4]: Verzeichnis „/home/pi/knxd/src/include“ wird betreten
make[5]: Verzeichnis „/home/pi/knxd/src/include“ wird betreten
make[5]: Für das Ziel „install-exec-am“ ist nichts zu tun.
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/include'
/usr/bin/install -c -m 644 eibclient.h eibtypes.h '/home/pi/knxd/debian/tmp/usr/include'
make[5]: Verzeichnis „/home/pi/knxd/src/include“ wird verlassen
make[4]: Verzeichnis „/home/pi/knxd/src/include“ wird verlassen
Making install in client
make[4]: Verzeichnis „/home/pi/knxd/src/client“ wird betreten
Making install in def
make[5]: Verzeichnis „/home/pi/knxd/src/client/def“ wird betreten
make[6]: Verzeichnis „/home/pi/knxd/src/client/def“ wird betreten
make[6]: Für das Ziel „install-exec-am“ ist nichts zu tun.
make[6]: Für das Ziel „install-data-am“ ist nichts zu tun.
make[6]: Verzeichnis „/home/pi/knxd/src/client/def“ wird verlassen
make[5]: Verzeichnis „/home/pi/knxd/src/client/def“ wird verlassen
Making install in c
make[5]: Verzeichnis „/home/pi/knxd/src/client/c“ wird betreten
make install-am
make[6]: Verzeichnis „/home/pi/knxd/src/client/c“ wird betreten
make[7]: Verzeichnis „/home/pi/knxd/src/client/c“ wird betreten
make[7]: Für das Ziel „install-data-am“ ist nichts zu tun.
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/lib/arm-linux-gnueabihf'
/bin/bash ../../../libtool --mode=install /usr/bin/install -c libeibclient.la '/home/pi/knxd/debian/tmp/usr/lib/arm-linux-gnueabihf'
libtool: install: /usr/bin/install -c .libs/libeibclient.so.0.0.0 /home/pi/knxd/debian/tmp/usr/lib/arm-linux-gnueabihf/libeibclient.so.0.0.0
libtool: install: (cd /home/pi/knxd/debian/tmp/usr/lib/arm-linux-gnueabihf && { ln -s -f libeibclient.so.0.0.0 libeibclient.so.0 || { rm -f libeibclient.so.0 && ln -s libeibclient.so.0.0.0 libeibclient.so.0; }; })
libtool: install: (cd /home/pi/knxd/debian/tmp/usr/lib/arm-linux-gnueabihf && { ln -s -f libeibclient.so.0.0.0 libeibclient.so || { rm -f libeibclient.so && ln -s libeibclient.so.0.0.0 libeibclient.so; }; })
libtool: install: /usr/bin/install -c .libs/libeibclient.lai /home/pi/knxd/debian/tmp/usr/lib/arm-linux-gnueabihf/libeibclient.la
libtool: install: /usr/bin/install -c .libs/libeibclient.a /home/pi/knxd/debian/tmp/usr/lib/arm-linux-gnueabihf/libeibclient.a
libtool: install: chmod 644 /home/pi/knxd/debian/tmp/usr/lib/arm-linux-gnueabihf/libeibclient.a
libtool: install: ranlib /home/pi/knxd/debian/tmp/usr/lib/arm-linux-gnueabihf/libeibclient.a
libtool: warning: remember to run 'libtool --finish /usr/lib/arm-linux-gnueabihf'
make[7]: Verzeichnis „/home/pi/knxd/src/client/c“ wird verlassen
make[6]: Verzeichnis „/home/pi/knxd/src/client/c“ wird verlassen
make[5]: Verzeichnis „/home/pi/knxd/src/client/c“ wird verlassen
Making install in php
make[5]: Verzeichnis „/home/pi/knxd/src/client/php“ wird betreten
make[6]: Verzeichnis „/home/pi/knxd/src/client/php“ wird betreten
make[6]: Für das Ziel „install-exec-am“ ist nichts zu tun.
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/share/knxd'
/usr/bin/install -c -m 644 eibclient.php '/home/pi/knxd/debian/tmp/usr/share/knxd'
make[6]: Verzeichnis „/home/pi/knxd/src/client/php“ wird verlassen
make[5]: Verzeichnis „/home/pi/knxd/src/client/php“ wird verlassen
Making install in perl
make[5]: Verzeichnis „/home/pi/knxd/src/client/perl“ wird betreten
make[6]: Verzeichnis „/home/pi/knxd/src/client/perl“ wird betreten
make[6]: Für das Ziel „install-exec-am“ ist nichts zu tun.
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/share/knxd'
/usr/bin/install -c -m 644 EIBConnection.pm '/home/pi/knxd/debian/tmp/usr/share/knxd'
make[6]: Verzeichnis „/home/pi/knxd/src/client/perl“ wird verlassen
make[5]: Verzeichnis „/home/pi/knxd/src/client/perl“ wird verlassen
Making install in cs
make[5]: Verzeichnis „/home/pi/knxd/src/client/cs“ wird betreten
make install-am
make[6]: Verzeichnis „/home/pi/knxd/src/client/cs“ wird betreten
make[7]: Verzeichnis „/home/pi/knxd/src/client/cs“ wird betreten
make[7]: Für das Ziel „install-exec-am“ ist nichts zu tun.
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/share/knxd'
/usr/bin/install -c -m 644 EIBConnection.cs '/home/pi/knxd/debian/tmp/usr/share/knxd'
make[7]: Verzeichnis „/home/pi/knxd/src/client/cs“ wird verlassen
make[6]: Verzeichnis „/home/pi/knxd/src/client/cs“ wird verlassen
make[5]: Verzeichnis „/home/pi/knxd/src/client/cs“ wird verlassen
Making install in python
make[5]: Verzeichnis „/home/pi/knxd/src/client/python“ wird betreten
make[6]: Verzeichnis „/home/pi/knxd/src/client/python“ wird betreten
make[6]: Für das Ziel „install-exec-am“ ist nichts zu tun.
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/share/knxd'
/usr/bin/install -c -m 644 EIBConnection.py '/home/pi/knxd/debian/tmp/usr/share/knxd'
make[6]: Verzeichnis „/home/pi/knxd/src/client/python“ wird verlassen
make[5]: Verzeichnis „/home/pi/knxd/src/client/python“ wird verlassen
Making install in pascal
make[5]: Verzeichnis „/home/pi/knxd/src/client/pascal“ wird betreten
make[6]: Verzeichnis „/home/pi/knxd/src/client/pascal“ wird betreten
make[6]: Für das Ziel „install-exec-am“ ist nichts zu tun.
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/share/knxd'
/usr/bin/install -c -m 644 EIBD.pas '/home/pi/knxd/debian/tmp/usr/share/knxd'
make[6]: Verzeichnis „/home/pi/knxd/src/client/pascal“ wird verlassen
make[5]: Verzeichnis „/home/pi/knxd/src/client/pascal“ wird verlassen
Making install in ruby
make[5]: Verzeichnis „/home/pi/knxd/src/client/ruby“ wird betreten
make[6]: Verzeichnis „/home/pi/knxd/src/client/ruby“ wird betreten
make[6]: Für das Ziel „install-exec-am“ ist nichts zu tun.
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/share/knxd'
/usr/bin/install -c -m 644 EIBConnection.rb '/home/pi/knxd/debian/tmp/usr/share/knxd'
make[6]: Verzeichnis „/home/pi/knxd/src/client/ruby“ wird verlassen
make[5]: Verzeichnis „/home/pi/knxd/src/client/ruby“ wird verlassen
Making install in lua
make[5]: Verzeichnis „/home/pi/knxd/src/client/lua“ wird betreten
make[6]: Verzeichnis „/home/pi/knxd/src/client/lua“ wird betreten
make[6]: Für das Ziel „install-exec-am“ ist nichts zu tun.
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/share/knxd'
/usr/bin/install -c -m 644 EIBConnection.lua '/home/pi/knxd/debian/tmp/usr/share/knxd'
make[6]: Verzeichnis „/home/pi/knxd/src/client/lua“ wird verlassen
make[5]: Verzeichnis „/home/pi/knxd/src/client/lua“ wird verlassen
Making install in go
make[5]: Verzeichnis „/home/pi/knxd/src/client/go“ wird betreten
make[6]: Verzeichnis „/home/pi/knxd/src/client/go“ wird betreten
make[6]: Für das Ziel „install-exec-am“ ist nichts zu tun.
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/share/knxd'
/usr/bin/install -c -m 644 EIBConnection.go '/home/pi/knxd/debian/tmp/usr/share/knxd'
make[6]: Verzeichnis „/home/pi/knxd/src/client/go“ wird verlassen
make[5]: Verzeichnis „/home/pi/knxd/src/client/go“ wird verlassen
Making install in .
make[5]: Verzeichnis „/home/pi/knxd/src/client“ wird betreten
make[6]: Verzeichnis „/home/pi/knxd/src/client“ wird betreten
make[6]: Für das Ziel „install-exec-am“ ist nichts zu tun.
make[6]: Für das Ziel „install-data-am“ ist nichts zu tun.
make[6]: Verzeichnis „/home/pi/knxd/src/client“ wird verlassen
make[5]: Verzeichnis „/home/pi/knxd/src/client“ wird verlassen
make[4]: Verzeichnis „/home/pi/knxd/src/client“ wird verlassen
Making install in usb
make[4]: Verzeichnis „/home/pi/knxd/src/usb“ wird betreten
make[5]: Verzeichnis „/home/pi/knxd/src/usb“ wird betreten
make[5]: Für das Ziel „install-data-am“ ist nichts zu tun.
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c findknxusb '/home/pi/knxd/debian/tmp/usr/bin'
libtool: install: /usr/bin/install -c findknxusb /home/pi/knxd/debian/tmp/usr/bin/findknxusb
make[5]: Verzeichnis „/home/pi/knxd/src/usb“ wird verlassen
make[4]: Verzeichnis „/home/pi/knxd/src/usb“ wird verlassen
Making install in libserver
make[4]: Verzeichnis „/home/pi/knxd/src/libserver“ wird betreten
make[5]: Verzeichnis „/home/pi/knxd/src/libserver“ wird betreten
make[5]: Für das Ziel „install-exec-am“ ist nichts zu tun.
make[5]: Für das Ziel „install-data-am“ ist nichts zu tun.
make[5]: Verzeichnis „/home/pi/knxd/src/libserver“ wird verlassen
make[4]: Verzeichnis „/home/pi/knxd/src/libserver“ wird verlassen
Making install in backend
make[4]: Verzeichnis „/home/pi/knxd/src/backend“ wird betreten
make[5]: Verzeichnis „/home/pi/knxd/src/backend“ wird betreten
make[5]: Für das Ziel „install-exec-am“ ist nichts zu tun.
make[5]: Für das Ziel „install-data-am“ ist nichts zu tun.
make[5]: Verzeichnis „/home/pi/knxd/src/backend“ wird verlassen
make[4]: Verzeichnis „/home/pi/knxd/src/backend“ wird verlassen
Making install in server
make[4]: Verzeichnis „/home/pi/knxd/src/server“ wird betreten
make[5]: Verzeichnis „/home/pi/knxd/src/server“ wird betreten
make[5]: Für das Ziel „install-data-am“ ist nichts zu tun.
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/bin'
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c knxd '/home/pi/knxd/debian/tmp/usr/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c knxd_args '/home/pi/knxd/debian/tmp/usr/lib'
libtool: install: /usr/bin/install -c knxd /home/pi/knxd/debian/tmp/usr/bin/knxd
libtool: install: /usr/bin/install -c knxd_args /home/pi/knxd/debian/tmp/usr/lib/knxd_args
make[5]: Verzeichnis „/home/pi/knxd/src/server“ wird verlassen
make[4]: Verzeichnis „/home/pi/knxd/src/server“ wird verlassen
Making install in tools
make[4]: Verzeichnis „/home/pi/knxd/src/tools“ wird betreten
make[5]: Verzeichnis „/home/pi/knxd/src/tools“ wird betreten
mkdir -p /home/pi/knxd/debian/tmp//usr/lib/knxd
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/bin'
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/lib/knxd'
for L in busmonitor1 busmonitor2 readindividual progmodeon progmodeoff progmodetoggle progmodestatus maskver writeaddress vbusmonitor1 vbusmonitor2 mprogmodeon mprogmodeoff mprogmodetoggle mprogmodestatus mmaskver mpeitype madcread mread mwrite mpropread mpropwrite mpropdesc mpropscan groupread groupswrite groupwrite msetkey grouplisten groupresponse groupsresponse groupsocketlisten groupsocketread mpropscanpoll vbusmonitor1poll groupreadresponse groupcacheenable groupcachedisable groupcacheclear groupcacheremove groupcachereadsync groupcacheread mwriteplain mrestart groupsocketwrite groupsocketswrite xpropread xpropwrite groupcachelastupdates busmonitor3 vbusmonitor3 vbusmonitor1time; do ln -sf ../../bin/knxtool /home/pi/knxd/debian/tmp//usr/lib/knxd/$L; done
/bin/bash ../../libtool --mode=install /usr/bin/install -c knxtool '/home/pi/knxd/debian/tmp/usr/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c eibread-cgi eibwrite-cgi '/home/pi/knxd/debian/tmp/usr/lib/knxd'
libtool: warning: '../client/c/libeibclient.la' has not been installed in '/usr/lib/arm-linux-gnueabihf'
libtool: warning: '../client/c/libeibclient.la' has not been installed in '/usr/lib/arm-linux-gnueabihf'
libtool: install: /usr/bin/install -c .libs/knxtool /home/pi/knxd/debian/tmp/usr/bin/knxtool
libtool: install: /usr/bin/install -c .libs/eibread-cgi /home/pi/knxd/debian/tmp/usr/lib/knxd/eibread-cgi
libtool: warning: '../client/c/libeibclient.la' has not been installed in '/usr/lib/arm-linux-gnueabihf'
libtool: install: /usr/bin/install -c .libs/eibwrite-cgi /home/pi/knxd/debian/tmp/usr/lib/knxd/eibwrite-cgi
make[5]: Verzeichnis „/home/pi/knxd/src/tools“ wird verlassen
make[4]: Verzeichnis „/home/pi/knxd/src/tools“ wird verlassen
Making install in examples
make[4]: Verzeichnis „/home/pi/knxd/src/examples“ wird betreten
make[5]: Verzeichnis „/home/pi/knxd/src/examples“ wird betreten
make[5]: Für das Ziel „install-exec-am“ ist nichts zu tun.
make[5]: Verzeichnis „/home/pi/knxd/src/examples“ wird verlassen
make[4]: Verzeichnis „/home/pi/knxd/src/examples“ wird verlassen
make[4]: Verzeichnis „/home/pi/knxd/src“ wird betreten
make[5]: Verzeichnis „/home/pi/knxd/src“ wird betreten
make[5]: Für das Ziel „install-exec-am“ ist nichts zu tun.
make[5]: Für das Ziel „install-data-am“ ist nichts zu tun.
make[5]: Verzeichnis „/home/pi/knxd/src“ wird verlassen
make[4]: Verzeichnis „/home/pi/knxd/src“ wird verlassen
make[3]: Verzeichnis „/home/pi/knxd/src“ wird verlassen
Making install in systemd
make[3]: Verzeichnis „/home/pi/knxd/systemd“ wird betreten
make[4]: Verzeichnis „/home/pi/knxd/systemd“ wird betreten
/bin/mkdir -p '/home/pi/knxd/debian/tmp/etc'
/bin/mkdir -p '/home/pi/knxd/debian/tmp/lib/systemd/system'
/bin/mkdir -p '/home/pi/knxd/debian/tmp/usr/lib/sysusers.d'
/usr/bin/install -c -m 644 knxd.conf '/home/pi/knxd/debian/tmp/etc'
/usr/bin/install -c -m 644 knxd.service knxd.socket '/home/pi/knxd/debian/tmp/lib/systemd/system'
/usr/bin/install -c -m 644 sysusers.d/knxd.conf '/home/pi/knxd/debian/tmp/usr/lib/sysusers.d'
make[4]: Verzeichnis „/home/pi/knxd/systemd“ wird verlassen
make[3]: Verzeichnis „/home/pi/knxd/systemd“ wird verlassen
make[2]: Verzeichnis „/home/pi/knxd“ wird verlassen
make[1]: Verzeichnis „/home/pi/knxd“ wird verlassen
rm -f debian/*.debhelper.log
debian/rules override_dh_install
make[1]: Verzeichnis „/home/pi/knxd“ wird betreten
cp debian/knxd.install.in debian/knxd.install
grep -qs 'HAVE_SYSTEMD_TRUE.*#' config.status || cat debian/knxd.install.systemd >> debian/knxd.install
test -e systemd/knxd.socket && cp systemd/knxd.socket debian/knxd.socket
test -e systemd/knxd.service && cp systemd/knxd.service debian/knxd.service
dh_install
/home/pi/knxd/debian/knxd.install: 1: /home/pi/knxd/debian/knxd.install: /usr/bin/knxd: not found
/home/pi/knxd/debian/knxd.install: 2: /home/pi/knxd/debian/knxd.install: /usr/lib/knxd_args: not found
/home/pi/knxd/debian/knxd.install: 3: /home/pi/knxd/debian/knxd.install: /lib/arm-linux-gnueabihf: Permission denied
/home/pi/knxd/debian/knxd.install: 4: /home/pi/knxd/debian/knxd.install: /etc/knxd.conf: not found
/home/pi/knxd/debian/knxd.install: 5: /home/pi/knxd/debian/knxd.install: /usr/lib/sysusers.d: not found
dh_install: debian/knxd.install (executable config) returned exit code 127
debian/rules:27: die Regel für Ziel „override_dh_install“ scheiterte
make[1]: *** [override_dh_install] Fehler 127
make[1]: Verzeichnis „/home/pi/knxd“ wird verlassen
debian/rules:14: die Regel für Ziel „binary“ scheiterte
make: *** [binary] Fehler 2
dpkg-buildpackage: Fehler: Fehler-Exitstatus von fakeroot debian/rules binary war 2
Kommentar