schalten mit knxtool will nicht ... komme nicht weiter

[robertmo]

Hallo, nachdem mein FS4 abgeraucht ist, dachte ich, ich installiere mal eben etwas auf dem RP3. Hatte erst eibd installiert und das lief ohne Probleme. Ich konnte über eibd auch die Beleuchtung schalten. Habe dann beim lesen verstanden, dass eibd nicht weiter entwickelt wird und mich auf knxd konzentriert. Installation lief problemlos. Ich habe eine IP Schnittstelle und eine USB Interface von Gira.

Die IP-Schnittstelle läuft, ich sehe was im Bus passiert. Wenn ich mit knxtool die Beleuchtung schalten will bekomme ich die Bestätigung "Send reuest", aber nichts passiert.

knxtool groupswrite ip:localhost 2/1/101 1

KNXD_OPTS="-f9 -t1023 -e 1.0.20 -E 1.0.21:8 -D -T -R -S --listen-local=/tmp/knx -b ipt:10.0.1.62"

Im log wird mir folgendes angezeigt:

Jan 08 13:54:26 piknx knxd[861]: Layer 6 [ 2:main/L 10.591] OK L
Jan 08 13:54:28 piknx knxd[861]: Layer 8 [ 8:systemd_/systemd 13.144] New Connection
Jan 08 13:54:28 piknx knxd[861]: Layer 8 [30:systemd_/CConn 13.144] ClientConnection Init
Jan 08 13:54:28 piknx knxd[861]: Layer 3 [30:systemd_/CConn 13.144] Allocate 1.0.21
Jan 08 13:54:28 piknx knxd[861]: Layer 0 [30:systemd_/CConn 13.144] ReadMessage(005): 00 22 11 65 FF
Jan 08 13:54:28 piknx knxd[861]: Layer 7 [31:systemd_@1.0.21/Group 13.144] OpenGroup
Jan 08 13:54:28 piknx knxd[861]: Layer 4 [33:systemd_/TGr 13.144] OpenGroup 2/1/101 WO
Jan 08 13:54:28 piknx knxd[861]: Layer 0 [30:systemd_/CConn 13.144] Send(002): 00 22
Jan 08 13:54:28 piknx knxd[861]: Layer 7 [31:systemd_@1.0.21/Group 13.145] OpenGroup complete
Jan 08 13:54:28 piknx knxd[861]: Layer 3 [32:systemd_/ConnS 13.145] registerLink: 32:systemd__32
Jan 08 13:54:28 piknx knxd[861]: Layer 3 [32:systemd_/ConnS 13.145] Start: cfg:systemd_
Jan 08 13:54:28 piknx knxd[861]: Layer 5 [32:systemd_/ConnS 13.145] down => >up
Jan 08 13:54:28 piknx knxd[861]: Layer 5 [32:systemd_/ConnS 13.145] Starting
Jan 08 13:54:28 piknx knxd[861]: Layer 5 [32:systemd_/ConnS 13.145] >up => up
Jan 08 13:54:28 piknx knxd[861]: Layer 4 [32:systemd_/ConnS 13.145] link state changed: up
Jan 08 13:54:28 piknx knxd[861]: Layer 5 [32:systemd_/ConnS 13.145] Started
Jan 08 13:54:28 piknx knxd[861]: Layer 4 [32:systemd_/ConnS 13.145] link state changed: up
Jan 08 13:54:28 piknx knxd[861]: Layer 4 [ 1:main 13.145] check start
Jan 08 13:54:28 piknx knxd[861]: Layer 4 [ 1:main 13.145] check end: want_up 1 some 1>1 all 0>1, going 0 up 6 down 0
Jan 08 13:54:28 piknx knxd[861]: Layer 0 [30:systemd_/CConn 13.146] ReadMessage(004): 00 25 00 81
Jan 08 13:54:28 piknx knxd[861]: Layer 7 [30:systemd_/CConn 13.146] recv Group(002): 00 81
Jan 08 13:54:28 piknx knxd[861]: Layer 4 [33:systemd_/TGr 13.146] Recv Group T_Data_Group A_GroupValue_Write (small) 01
Jan 08 13:54:28 piknx knxd[861]: Layer 8 [32:systemd_/ConnS 13.146] found addr 1.0.21
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [27:router/ConnC 13.146] sending, send_more clear
Jan 08 13:54:28 piknx knxd[861]: Layer 1 [12:server/Server 13.146] Send(011): 29 00 BC D0 10 15 11 65 01 00 81
Jan 08 13:54:28 piknx knxd[861]: Layer 2 [29:router.pace_/router 13.146] out 1/2: delay for 0.017 sec
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [23:B.ipt/Conn 13.146] sending, send_more clear
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [23:B.ipt/Conn 13.146] sendNext called, send_more set
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [ 1:main 13.146] sending set
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [27:router/ConnC 13.146] still waiting
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [ 1:main 13.146] wait L
Jan 08 13:54:28 piknx knxd[861]: Layer 8 [30:systemd_/CConn 13.146] ClientConnection 1.0.21 closing
Jan 08 13:54:28 piknx knxd[861]: Layer 3 [ 1:main 13.146] Release 1.0.21
Jan 08 13:54:28 piknx knxd[861]: Layer 3 [32:systemd_/ConnS 13.146] unregisterLink: systemd__32
Jan 08 13:54:28 piknx knxd[861]: Layer 8 [30:systemd_/CConn 13.146] Exiting
Jan 08 13:54:28 piknx knxd[861]: Layer 7 [30:systemd_/CConn 13.146] CloseGroup
Jan 08 13:54:28 piknx knxd[861]: Layer 4 [33:systemd_/TGr 13.146] CloseGroup
Jan 08 13:54:28 piknx knxd[861]: Layer 4 [ 1:main 13.147] check start
Jan 08 13:54:28 piknx knxd[861]: Layer 4 [ 1:main 13.147] check end: want_up 1 some 1>1 all 1>1, going 0 up 6 down 0
Jan 08 13:54:28 piknx knxd[861]: Layer 0 [12:server/Server 13.147] Send(017): 06 10 05 30 00 11 29 00 BC D0 10 15 11 65 01 00 81
Jan 08 13:54:28 piknx knxd[861]: Layer 1 [24:B.ipt/ipt 13.147] SendTunnel(015): 04 01 00 00 11 00 BC D0 10 15 11 65 01 00 81
Jan 08 13:54:28 piknx knxd[861]: Layer 1 [24:B.ipt/ipt 13.147] Send(015): 04 01 00 00 11 00 BC D0 10 15 11 65 01 00 81
Jan 08 13:54:28 piknx knxd[861]: Layer 0 [12:server/Server 13.147] Dropped(017): 06 10 05 30 00 11 29 00 BC D0 10 15 11 65 01 00 81
Jan 08 13:54:28 piknx knxd[861]: Layer 0 [24:B.ipt/ipt 13.148] Send(021): 06 10 04 20 00 15 04 01 00 00 11 00 BC D0 10 15 11 65 01 00 81
Jan 08 13:54:28 piknx knxd[861]: Layer 0 [24:B.ipt/ipt 13.149] Recv(010): 06 10 04 21 00 0A 04 01 00 00
Jan 08 13:54:28 piknx knxd[861]: Layer 2 [29:router.pace_/router 13.163] delay done
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [27:router/ConnC 13.163] sendNext called, send_more set
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [27:router/ConnC 13.163] is OK
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [23:B.ipt/Conn 13.163] is OK
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [19:A.unix/local 13.163] is OK
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [12:server/Server 13.163] is OK
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [ 8:systemd_/systemd 13.163] is OK
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [ 4:systemd_/systemd 13.163] is OK
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [ 1:main 13.163] OK
Jan 08 13:54:28 piknx knxd[861]: Layer 6 [ 2:main/L 13.163] OK L

Die USB-Schnittstelle habe ich als tpuarts konfiguriert. Hier habe ich das Problem, dass knxd immer wieder abstürtzt. Das steht etwas von error, aber ich weiß nicht weiter. Habe alle möglichen webseiten und dokus gelesen. Ich würde mich über eine Hilfestellung sehr freuen. DANKE 🙏

KNXD_OPTS="-f9 -t1023 -e 1.0.20 -E 1.0.21:8 -D -T -R -S --listen-local=/tmp/knx -b tpuarts:/dev/ttyKNX1"

Jan 08 12:47:23 piknx systemd[1]: knxd.service: Scheduled restart job, restart counter is at 18.
Jan 08 12:47:23 piknx systemd[1]: Stopped KNX Daemon.
Jan 08 12:47:23 piknx systemd[1]: Starting KNX Daemon...
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [ 1:main 0.000] initialized
Jan 08 12:47:23 piknx knxd[623]: I00000131: [ 1:main] 0.14.53: /usr/bin/knxd -f9 -t1023 -e 1.0.2 -E 1.0.3:6 -D -T -R -S --listen-local=/tmp/knx -b tpuarts:/dev/ttyKNX1
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [ 1:main 0.000] setting up
Jan 08 12:47:23 piknx knxd[623]: Layer 3 [ 4:systemd_/systemd 0.000] registerLink: 4:systemd_
Jan 08 12:47:23 piknx knxd[623]: Layer 3 [ 8:systemd_/systemd 0.001] registerLink: 8:systemd_
Jan 08 12:47:23 piknx knxd[623]: Layer 3 [12:server/Server 0.001] registerLink: 12:server
Jan 08 12:47:23 piknx knxd[623]: Layer 3 [19:A.unix/local 0.001] registerLink: 19:A.unix
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [26:B.tpuarts/log 0.001] Insert 25:LowF / 24:tpuart
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [26:B.tpuarts/log 0.001] Setup
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [28:B.tpuarts/log 0.001] Insert 27:TPU_ser / 25:LowF
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [26:B.tpuarts/log 0.001] Filter single not found
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [28:B.tpuarts/log 0.001] Setup
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [28:B.tpuarts/log 0.001] Setup OK: yes
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [26:B.tpuarts/log 0.001] Setup OK: yes
Jan 08 12:47:23 piknx knxd[623]: Layer 3 [23:B.tpuarts/Conn 0.001] registerLink: 23:B.tpuarts
Jan 08 12:47:23 piknx knxd[623]: I00000129: [ 1:main] Connected: cfg:B.tpuarts.
Jan 08 12:47:23 piknx knxd[623]: I00000129: [ 1:main] Connected: cfg:A.unix.
Jan 08 12:47:23 piknx knxd[623]: I00000129: [ 1:main] Connected: cfg:server.
Jan 08 12:47:23 piknx knxd[623]: I00000129: [ 1:main] Connected: cfg:systemd_.
Jan 08 12:47:23 piknx knxd[623]: I00000129: [ 1:main] Connected: cfg:systemd_.
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [ 1:main 0.001] setup OK
Jan 08 12:47:23 piknx knxd[623]: W00000125: [ 1:main] Consider using a config file.
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [ 1:main 0.001] trigger going up
Jan 08 12:47:23 piknx knxd[623]: Layer 3 [23:B.tpuarts/Conn 0.001] Start: cfg:B.tpuarts
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [23:B.tpuarts/Conn 0.001] down => >up
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [23:B.tpuarts/Conn 0.002] Starting
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [26:B.tpuarts/log 0.002] Start
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [28:B.tpuarts/log 0.002] Start
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [27:B.tpuarts/TPU_ser 0.003] Opened /dev/ttyKNX1 with baud 19200
Jan 08 12:47:23 piknx knxd[623]: Layer 2 [27:B.tpuarts/TPU_ser 0.003] Opened
Jan 08 12:47:23 piknx knxd[623]: Layer 2 [27:B.tpuarts/TPU_ser 0.003] Buffer Setup on fd 6
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [28:B.tpuarts/log 0.003] Started
Jan 08 12:47:23 piknx knxd[623]: Layer 8 [25:B.tpuarts/LowF 0.003] state: new > start
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [25:B.tpuarts/LowF 0.003] SendReset 01
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [28:B.tpuarts/log 0.003] Send(001): 01
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [23:B.tpuarts/Conn 0.003] link state changed: >up
Jan 08 12:47:23 piknx knxd[623]: Layer 3 [19:A.unix/local 0.003] Start: cfg:A.unix
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [19:A.unix/local 0.003] down => >up
Jan 08 12:47:23 piknx knxd[623]: Layer 8 [19:A.unix/local 0.003] OpenLocalSocket /tmp/knx
Jan 08 12:47:23 piknx knxd[623]: Layer 8 [19:A.unix/local 0.007] LocalSocket opened
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [19:A.unix/local 0.007] >up => up
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [19:A.unix/local 0.007] link state changed: up
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [19:A.unix/local 0.007] Started
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [19:A.unix/local 0.007] link state changed: up
Jan 08 12:47:23 piknx knxd[623]: Layer 3 [12:server/Server 0.007] Start: cfg:server
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [12:server/Server 0.007] down => >up
Jan 08 12:47:23 piknx knxd[623]: Layer 8 [12:server/Server 0.007] Open
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [12:server/Server 0.007] Open
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [12:server/Server 0.007] Opened
Jan 08 12:47:23 piknx knxd[623]: Layer 8 [31:router/driver 0.007] OpenD
Jan 08 12:47:23 piknx knxd[623]: Layer 8 [31:router/driver 0.008] OpenedD
Jan 08 12:47:23 piknx knxd[623]: N00000127: [32:router.pace_] The 'pace' filter without a queue acts globally.
Jan 08 12:47:23 piknx knxd[623]: Layer 3 [30:router/ConnC 0.008] registerLink: 30:router_30
Jan 08 12:47:23 piknx knxd[623]: Layer 3 [30:router/ConnC 0.008] Start: cfg:router
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [30:router/ConnC 0.008] down => >up
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [30:router/ConnC 0.008] Starting
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [30:router/ConnC 0.008] >up => up
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [30:router/ConnC 0.009] link state changed: up
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [30:router/ConnC 0.009] Started
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [30:router/ConnC 0.009] link state changed: up
Jan 08 12:47:23 piknx knxd[623]: Layer 8 [12:server/Server 0.009] Opened
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [12:server/Server 0.009] >up => up
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [12:server/Server 0.009] link state changed: up
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [12:server/Server 0.009] Started
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [12:server/Server 0.009] link state changed: up
Jan 08 12:47:23 piknx knxd[623]: Layer 3 [ 8:systemd_/systemd 0.009] Start: cfg:systemd_
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [ 8:systemd_/systemd 0.009] down => >up
Jan 08 12:47:23 piknx knxd[623]: Layer 8 [ 8:systemd_/systemd 0.009] OpenSystemdSocket 4
Jan 08 12:47:23 piknx knxd[623]: Layer 8 [ 8:systemd_/systemd 0.009] SystemdSocket 4 opened
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [ 8:systemd_/systemd 0.009] >up => up
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [ 8:systemd_/systemd 0.009] link state changed: up
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [ 8:systemd_/systemd 0.009] Started
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [ 8:systemd_/systemd 0.009] link state changed: up
Jan 08 12:47:23 piknx knxd[623]: Layer 3 [ 4:systemd_/systemd 0.009] Start: cfg:systemd_
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [ 4:systemd_/systemd 0.009] down => >up
Jan 08 12:47:23 piknx systemd[1]: Started KNX Daemon.
Jan 08 12:47:23 piknx knxd[623]: Layer 8 [ 4:systemd_/systemd 0.009] OpenSystemdSocket 3
Jan 08 12:47:23 piknx knxd[623]: Layer 8 [ 4:systemd_/systemd 0.009] SystemdSocket 3 opened
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [ 4:systemd_/systemd 0.009] >up => up
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [ 4:systemd_/systemd 0.009] link state changed: up
Jan 08 12:47:23 piknx knxd[623]: Layer 5 [ 4:systemd_/systemd 0.009] Started
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [ 4:systemd_/systemd 0.009] link state changed: up
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [ 1:main 0.009] going up triggered
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [ 1:main 0.010] check start
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [23:B.tpuarts/Conn 0.010] state is >up
Jan 08 12:47:23 piknx knxd[623]: Layer 4 [ 1:main 0.010] check end: want_up 1 some 1>1 all 0>0, going 1 up 5 down 0
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [25:B.tpuarts/LowF 0.485] SendReset 01
Jan 08 12:47:23 piknx knxd[623]: Layer 0 [28:B.tpuarts/log 0.485] Send(001): 01
Jan 08 12:47:24 piknx knxd[623]: Layer 0 [25:B.tpuarts/LowF 0.986] SendReset 01
Jan 08 12:47:24 piknx knxd[623]: Layer 0 [28:B.tpuarts/log 0.986] Send(001): 01
Jan 08 12:47:24 piknx knxd[623]: Layer 8 [25:B.tpuarts/LowF 1.486] state: in_reset > error
Jan 08 12:47:25 piknx knxd[623]: Layer 0 [28:B.tpuarts/log 2.487] Stop
Jan 08 12:47:25 piknx knxd[623]: Layer 0 [28:B.tpuarts/log 2.487] Errored
Jan 08 12:47:25 piknx knxd[623]: Layer 8 [25:B.tpuarts/LowF 2.487] state: error > new
Jan 08 12:47:25 piknx knxd[623]: Layer 0 [26:B.tpuarts/log 2.488] Errored
Jan 08 12:47:25 piknx knxd[623]: Layer 5 [23:B.tpuarts/Conn 2.488] >up => error
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [23:B.tpuarts/Conn 2.488] link state changed: error
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 1:main 2.488] check start
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 1:main 2.488] check end: want_up 1 some 1>1 all 0>0, going 0 up 5 down 1
Jan 08 12:47:25 piknx knxd[623]: F00000105: [23:B.tpuarts] Link down, terminating
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 1:main 2.488] trigger Going down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [23:B.tpuarts/Conn 2.488] R Stopping
Jan 08 12:47:25 piknx knxd[623]: Layer 5 [23:B.tpuarts/Conn 2.488] error => >down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [23:B.tpuarts/Conn 2.488] link state changed: error
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [19:A.unix/local 2.488] R Stopping
Jan 08 12:47:25 piknx knxd[623]: Layer 5 [19:A.unix/local 2.488] up => >down
Jan 08 12:47:25 piknx knxd[623]: Layer 8 [19:A.unix/local 2.488] StopServer
Jan 08 12:47:25 piknx knxd[623]: Layer 5 [19:A.unix/local 2.488] >down => down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [19:A.unix/local 2.488] link state changed: down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [19:A.unix/local 2.488] link state changed: down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [12:server/Server 2.488] R Stopping
Jan 08 12:47:25 piknx knxd[623]: Layer 5 [12:server/Server 2.488] up => >down
Jan 08 12:47:25 piknx knxd[623]: Layer 5 [30:router/ConnC 2.488] L Stopping
Jan 08 12:47:25 piknx knxd[623]: Layer 5 [30:router/ConnC 2.488] up => down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [30:router/ConnC 2.488] link state changed: down
Jan 08 12:47:25 piknx knxd[623]: Layer 3 [30:router/ConnC 2.488] unregisterLink: router_30
Jan 08 12:47:25 piknx knxd[623]: Layer 0 [12:server/Server 2.488] Close D
Jan 08 12:47:25 piknx knxd[623]: Layer 5 [12:server/Server 2.489] >down => down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [12:server/Server 2.489] link state changed: down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [12:server/Server 2.489] link state changed: down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 8:systemd_/systemd 2.489] R Stopping
Jan 08 12:47:25 piknx knxd[623]: Layer 5 [ 8:systemd_/systemd 2.489] up => >down
Jan 08 12:47:25 piknx knxd[623]: Layer 8 [ 8:systemd_/systemd 2.489] StopServer
Jan 08 12:47:25 piknx knxd[623]: Layer 5 [ 8:systemd_/systemd 2.489] >down => down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 8:systemd_/systemd 2.489] link state changed: down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 8:systemd_/systemd 2.489] link state changed: down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 4:systemd_/systemd 2.489] R Stopping
Jan 08 12:47:25 piknx knxd[623]: Layer 5 [ 4:systemd_/systemd 2.489] up => >down
Jan 08 12:47:25 piknx knxd[623]: Layer 8 [ 4:systemd_/systemd 2.489] StopServer
Jan 08 12:47:25 piknx knxd[623]: Layer 5 [ 4:systemd_/systemd 2.489] >down => down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 4:systemd_/systemd 2.489] link state changed: down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 4:systemd_/systemd 2.489] link state changed: down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 1:main 2.489] check start
Jan 08 12:47:25 piknx knxd[623]: Layer 8 [31:router/driver 2.489] CloseD
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [19:A.unix/local 2.489] is down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [12:server/Server 2.490] is down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 8:systemd_/systemd 2.490] is down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 4:systemd_/systemd 2.490] is down
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 1:main 2.490] check end: want_up 0 some 1>0 all 0>0, going 0 up 0 down 5
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 1:main 2.490] down
Jan 08 12:47:25 piknx knxd[623]: N00000128: [ 1:main] Shutting down.
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 1:main 2.490] deleting
Jan 08 12:47:25 piknx knxd[623]: Layer 0 [26:B.tpuarts/log 2.490] Closing
Jan 08 12:47:25 piknx knxd[623]: Layer 2 [25:B.tpuarts/LowF 2.490] Close C
Jan 08 12:47:25 piknx knxd[623]: Layer 0 [28:B.tpuarts/log 2.490] Closing
Jan 08 12:47:25 piknx knxd[623]: Layer 2 [27:B.tpuarts/TPU_ser 2.490] Close F
Jan 08 12:47:25 piknx knxd[623]: Layer 8 [19:A.unix/local 2.490] StopServer
Jan 08 12:47:25 piknx knxd[623]: Layer 8 [12:server/Server 2.490] Close E
Jan 08 12:47:25 piknx knxd[623]: Layer 8 [ 8:systemd_/systemd 2.490] StopServer
Jan 08 12:47:25 piknx knxd[623]: Layer 8 [ 4:systemd_/systemd 2.491] StopServer
Jan 08 12:47:25 piknx knxd[623]: Layer 4 [ 1:main 2.491] deleted.
Jan 08 12:47:25 piknx systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Jan 08 12:47:25 piknx systemd[1]: knxd.service: Failed with result 'exit-code'.

[robertmo]

Ok, hatte gerade eine Eingebung 😊