Erstellen der knxd.ini bei einem seriellen Gateway

[roadrunnerv2]

Hallo!

Trotz zahlreicher Beiträge komme ich beim erstellen der knxd.ini nicht weiter. Ich habe es auf einem BeagleBone Black installiert und ist mit einem Weinzierl Tiny serial verbaut.

knxd.service

[Unit]
Description=KNX Daemon
After=network.target knxd.socket
Requires=knxd.socket

[Service]
EnvironmentFile=/etc/knxd.conf
ExecStart=/usr/bin/knxd $KNXD_OPTS
User=knxd
Group=knxd
Type=notify

Restart=on-failure
RestartSec=10

[Install]
WantedBy=multi-user.target network-online.target
Also=knxd.socket

knxd.ini

# configuration for knxd.service
[main]
addr = 1.1.200
client-addrs = 1.1.201:5
connections = server,B.tpuarts
systemd = systemd
name = Beagle KNX

[B.tpuarts]
device = /dev/ttyS1
driver = tpuart

[server]
server = ets_router
discover = true
debug = debug-server
router = router
tunnel = tunnel
interface = eth0
multicast-address = 224.0.23.12

[debug-server]
name = mcast:knxd

[router]
filters = A.pace

[A.pace]
delay = 50
filter = pace

[tunnel]
filters = log

[systemd]
debug = debug-systemd
filters = log

[debug-systemd]
error-level = 0x0
trace-mask = 0xfc
​

knxd.conf

KNXD_OPTS=/etc/knxd.ini
​

journalctl -uknxd -n30

Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 3 [ 9:systemd_/systemd     0.005] registerLink: 9:systemd_
Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 0 [17:log/tunnel           0.005] State setup
Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 3 [ 9:systemd_/systemd     0.017] Start: cfg:systemd_
Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 5 [ 9:systemd_/systemd     0.019] down => >up
Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 5 [ 9:systemd_/systemd     0.021] >up => up
Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 4 [ 9:systemd_/systemd     0.021] link state changed: up
Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 5 [ 9:systemd_/systemd     0.021] Started
Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 4 [ 9:systemd_/systemd     0.021] link state changed: up
Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 3 [ 4:systemd_/systemd     0.021] Start: cfg:systemd_
Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 5 [ 4:systemd_/systemd     0.021] down => >up
Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 5 [ 4:systemd_/systemd     0.021] >up => up
Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 4 [ 4:systemd_/systemd     0.021] link state changed: up
Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 5 [ 4:systemd_/systemd     0.021] Started
Jul 29 13:37:10 beagle knxd[1950]: Beagle KNX: Layer 4 [ 4:systemd_/systemd     0.021] link state changed: up
Jul 29 13:37:10 beagle systemd[1]: Started KNX Daemon.
Jul 29 13:37:13 beagle knxd[1950]: Beagle KNX: F00000105: [23:B.tpuarts] Link down, terminating
Jul 29 13:37:13 beagle knxd[1950]: Beagle KNX: Layer 4 [ 9:systemd_/systemd     2.509] R Stopping
Jul 29 13:37:13 beagle knxd[1950]: Beagle KNX: Layer 5 [ 9:systemd_/systemd     2.509] up => >down
Jul 29 13:37:13 beagle knxd[1950]: Beagle KNX: Layer 5 [ 9:systemd_/systemd     2.509] >down => down
Jul 29 13:37:13 beagle knxd[1950]: Beagle KNX: Layer 4 [ 9:systemd_/systemd     2.509] link state changed: down
Jul 29 13:37:13 beagle knxd[1950]: Beagle KNX: Layer 4 [ 9:systemd_/systemd     2.509] link state changed: down
Jul 29 13:37:13 beagle knxd[1950]: Beagle KNX: Layer 4 [ 4:systemd_/systemd     2.509] R Stopping
Jul 29 13:37:13 beagle knxd[1950]: Beagle KNX: Layer 5 [ 4:systemd_/systemd     2.509] up => >down
Jul 29 13:37:13 beagle knxd[1950]: Beagle KNX: Layer 5 [ 4:systemd_/systemd     2.510] >down => down
Jul 29 13:37:13 beagle knxd[1950]: Beagle KNX: Layer 4 [ 4:systemd_/systemd     2.510] link state changed: down
Jul 29 13:37:13 beagle knxd[1950]: Beagle KNX: Layer 4 [ 4:systemd_/systemd     2.510] link state changed: down
Jul 29 13:37:13 beagle knxd[1950]: Beagle KNX: Layer 4 [ 9:systemd_/systemd     2.510] is down
Jul 29 13:37:13 beagle knxd[1950]: Beagle KNX: Layer 4 [ 4:systemd_/systemd     2.510] is down
Jul 29 13:37:13 beagle systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Jul 29 13:37:13 beagle systemd[1]: knxd.service: Failed with result 'exit-code'.
​

ls -lh /dev/ttyS1

crw-rw---- 1 root dialout 4, 65 Jul 29 13:40 /dev/ttyS1

Ist da ein Problem mit der Verbindung zum Weinzierl Tiny Serial?

[roadrunnerv2]

Hallo!

Klappt nun. War scheinbar ein Hardwareproblem.