Making first setup work ...

[tuxedo]

Good news, beta3 WILL contain I18N --> https://github.com/KONNEKTING/Konnek..._US.properties

Regarding the sample sketch: Good idea. Pls. create an issue for this request: https://github.com/KONNEKTING/Konnek...Library/issues

[fluppie]

Ok, just done that.
I just received my Arduino Micro from Antratek, so I'll test that one tonight.

[Eugenius]

Simple sketch, but not hardcoded: https://github.com/KONNEKTING/Konnek...tch_Konnekting

• listen on first GA an toggle ProgLED on an off
• sends every 1000ms true or false to the second GA

i try to make "hardcoded" version too.

[fluppie]

// Definition of the Communication Objects attached to the device
KnxComObject KnxDevice::_comObjectsList[] = {
    /* don't change this */ Tools.createProgComObject(),
                            
    // Currently, Sketch Index and Suite Index differ for ComObjects :-(
                            
    /* Sketch-Index 1, Suite-Index 0 : */ KnxComObject(KNX_DPT_1_001, "0/0/1"),
    /* Sketch-Index 2, Suite-Index 1 : */ KnxComObject(KNX_DPT_1_001, "0/0/2"),
};

Will this work? Or is it "0,0,1"?

[tuxedo]

This is with beta3 now obsolete.

GAs are programmed via Suite and no longer provided via sketch.

New example:

/* Sketch-Index 1, Suite-Index 0 : */ KnxComObject(KNX_DPT_1_001, COM_OBJ_LOGIC_IN),

There's a "dirty hack" to set GA without the suite:

You have to write the GA + a settings-byte to the EEPROM before you run Knx.init(...).

Eugen will test this and provide an example...

btw: checkout beta3 we just released: https://knx-user-forum.de/forum/proj...-beta-3-ist-da

[Eugenius]

Sketch for communication test is ready

https://github.com/KONNEKTING/Konnek...unication_test

you don't need Suite to use it.

if need another PA/GA, pls. use knx_address_calculator.html from here: https://github.com/KONNEKTING/KonnektingDeviceLibrary

[fluppie]

Thanks Eugenius! Sketch is working, so my BCU is ok and the comm. arduino<=>BCU is also working.

[Eugenius]

you can also send true or false 0/0/1 to turn on or off ProgLED

[fluppie]

Hmm, weird. So I tried to program the Temp RH sketch with the new b3 suite. But when I press the red button (or one of the other three colored buttons) I don't get the pop-up screen with "press the program button". I'm using the Windows 64 bit version of the suite. Do I miss some component?

[tuxedo]

I'm sorry. There's a bug in beta3 ... stay tuned. Will fix it.

[tuxedo]

bugfixed beta3 is now uploading to github. Just download again and replace existing beta3 download.

[fluppie]

I'll check it tonight. When I click the button the pop-up appears. So hopefully I'll be able to program my first Konnekting device .
My goal is to create an input device for my Niko pushbuttons. This input device will be equipped with a DS18B20 and Bosch BME280. I'm also looking to integrate a CO2 sensor like the Senseair S8. But I think that will not be possible in a single wallbox...

Interesting links regaring CO2 monitoring with a Sensair S8:

https://github.com/experimental-platform/example-co2
http://www.co2meter.com/collections/co2-sensors/products/s8-miniature-co2-sensor
https://cdn.shopify.com/s/files/1/0019/5952/files/Senseair-Arduino.pdf
https://www.m.nu/co2matare-fran-senseair-p-1440.html
http://www.senseair.com/wp-content/uploads/2012/06/PSP107.pdf

[Eugenius]

I have allready working Sketch for DS18B20, i can share it with you.
BME280 is similar to HTU21D=DemoSketch

[tuxedo]

The senseair sensor is quite expensive?!

We use the AMS iAQ Core: http://ams.com/eng/Products/Environm...ors/iAQ-core-C (there's also a pulse version available).

It's about 35EUR and meausres VOC. Pure co2 values are not that interesting I think. VOC "smells" bad air quality, so that you can trigger to boost your ventilation system to improve the air quality... (that's exactly my use-case). WIth just co2 value, this is not that easy.

[fluppie]

Hmm ok, didn't know. I also came across the Bosche BME680, also a VOC sensor. https://www.bosch-sensortec.com/bst/...roducts/bme680
But I can't find it anywhere. Anyone knows where to get it?