Probleme mit Diagrammen -> nur Loading ...

[larsknx]

Hallo zusammen, ich probiere seit Tagen, meine Diagramme wieder ans Laufen zu bekommen.

Ich erhalte beim Aufrufen nicht mehr die Diagramme, sondern nur noch "Loading" (siehe Screenshot. Ich kann mir nicht erklären, woran es liegen könnte.

Die Cometvisu ist in der aktuellen svn Version installiert.

Hier mein Setup:

<diagram_inline rrd="Aussen_temp" width="600" height="250" unit="C" series="day" period="7" datasource="AVERAGE" refresh="300">Aussentemperatur </diagram_inline>

Die rdd's werden richtig angelegt:

multihome:/etc/apache2/sites-available# ls -la /var/www/rrd
insgesamt 11400
drwxrwxrwx 2 www-data www-data 4096 18. Sep 20:08 .
drwxrwxrwx 24 root smbusers 4096 19. Sep 13:42 ..
-rw-rw-rw- 1 root root 382244 18. Sep 20:05 28.Aussen_temp.rdd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 Aussen_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 Buero1_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 Buero2_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 BueroKueche_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 BueroWC_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 Diele_temp.rrd
-rw-rw-rw- 1 root root 763020 20. Sep 08:55 eib_traffic.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 Elternbad_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 Eltern_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 GaesteWC_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 Galerie_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 HWR_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 Kinderbad_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 Kueche_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 wiregated_cstime.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 wiregated_cutime.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 wiregated_mem.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:57 wiregated-ow_cstime.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:57 wiregated-ow_cutime.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:57 wiregated-ow_mem.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:57 wiregated-ow_stime.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:57 wiregated-ow_utime.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 wiregated_stime.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 wiregated_utime.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 WohnenEssen_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 Zimmer1_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 Zimmer2_temp.rrd
-rw-rw-rw- 1 root root 382244 20. Sep 08:55 Zimmer3_temp.rrd

Ein Ausführen von rrdtool fetch /var/www/rrd/Aussen_temp.rrd AVERAGE -s-24h ergibt:

1348120800: 8,2144743020e+00
1348121100: 8,2432200893e+00
1348121400: 8,1434219683e+00
1348121700: 8,1562040627e+00
1348122000: 8,2558043217e+00
1348122300: 8,8022231450e+00
1348122600: 9,1442920883e+00
1348122900: 8,9337963920e+00
1348123200: 9,0197212947e+00
1348123500: 9,6365831467e+00
1348123800: 1,0162546558e+01
1348124100: 1,0625027842e+01
1348124400: 1,1286637835e+01 usw.

Ein cat /etc/wiregate/eibga.conf |grep Aussen

[1/1/20]
DPTId=9
DPTSubId=9.001
name=Aussen_temp

Bugzilla gibt folgendes aus:

http://192.168.2.111/cgi-bin/rrdfetc...nd=now&res=300


Parameter

ds AVERAGE
end now
res 300
rrd Aussen_temp.rrd
start end-7day

Header

Antwort-Header
Connection Keep-Alive
Content-Encoding gzip
Content-Type application/json
Date Thu, 20 Sep 2012 06:55:23 GMT
Keep-Alive timeout=15, max=81
Server Apache/2.2.16 (Debian)
Transfer-Encoding chunked
Anfrage-Header
Accept application/json, text/javascript, */*; q=0.01
Accept-Encoding gzip, deflate
Accept-Language de-de,de;q=0.8,en-us;q=0.5,en;q=0.3
Connection keep-alive
Host 192.168.2.111
Referer http://192.168.2.111/visu_svn/visu/?
User-Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:15.0) Gecko/20100101 Firefox/15.0.1
X-Requested-With XMLHttpRequest

Antwort

1347526800: 1.8800000000e+01
1347527100: 1.8800000000e+01
1347527400: 2.0149810574e+01

Rufe ich das rrdtool auf der Konsole auf, kommt folgende Ausgabe:

multihome:/home# /usr/bin/rrdtool fetch /var/www/rrd/Aussen_temp.rrd AVERAGE -send-7day -enow -r300
1347526500: 1,8800000000e+01
1347526800: 1,8800000000e+01
1347527100: 1,8800000000e+01
1347527400: 2,0149810574e+01
1347527700: 2,0200000000e+01
1347528000: 2,1259032931e+01
1347528300: 2,1876064532e+01
1347528600: 2,3719749915e+01
1347528900: 2,6189964250e+01
1347529200: 2,6585347746e+01
1347529500: 2,6884351120e+01
1347529800: 2,6332299094e+01
1347530100: 2,6866697544e+01

Ich weiss mir einfach keinen Rat mehr, worans liegen könnte :

Spielt die owsensors.conf beim Generieren der Grafiken über die get_widget_diagram.php eine Rolle, da steht bisher nur folgendes drinne:

udp_port =
udp_ip = localhost
vpn_mgmnt_active_ga = 14/5/144
vpn_server_active_ga = 14/5/145
sendtime_ga_time = 0/7/101
sendtime_ga_date = 0/7/100
sendtime_cycle = 300
cycle = 300
eib_logging = 1

Laut get_widget_diagram.php wird hier aus der owsensors.conf ein Array gebildet. Muss ich dort meine Aussentemperatur noch reinbringen.

$arrOW = array();
if (true === file_exists(FILE_OW)) {
$arrOW = parse_ini_file(FILE_OW, true);
}

$arrGA = array();
if (true === file_exists(FILE_GA)) {
$arrGA = parse_ini_file(FILE_GA, true);
}

$arrAdresses = array();

foreach (glob(DIR_RRD) as $filename) {
$filebase = basename($filename);
$arrRRDParts = explode("_", $filebase, 2);
$arrRRDtype = explode(".", $arrRRDParts[1], 2);
$arrAdresses[$filebase] = array(
"address" => $arrOW[$arrRRDParts[0]]['eib_ga_'.$arrRRDtype[0]],
"name" => utf8_encode($arrOW[$arrRRDParts[0]]['name']),
"dpt" => $arrGA[$arrOW[$arrRRDParts[0]]['eib_ga_'.$arrRRDtype[0]]]['DPTSubId']
);
break;
}

Rufe ich http://XXX.XXX.XXX.XXX/visu_svn/visu...et_diagram.php im Browser auf, erhalte ich leider folgende Ausgabe:

{"Aussen_temp.rrd":{"address":null,"name":"","dpt" :null}

{"Aussen_temp.rrd":{"address":null,"name":"","dpt" :null},"Buero1_temp.rrd":{"address":null,"name":"" ,"dpt":null},"Buero2_temp.rrd":{"address":null,"na me":"","dpt":null},"BueroKueche_temp.rrd":{"addres s":null,"name":"","dpt":null},"BueroWC_temp.rrd":{ "address":null,"name":"","dpt":null},"Diele_temp.r rd":{"address":null,"name":"","dpt":null},"Eltern_ temp.rrd":{"address":null,"name":"","dpt":null},"E lternbad_temp.rrd":{"address":null,"name":"","dpt" :null},"GaesteWC_temp.rrd":{"address":null,"name": "","dpt":null},"Galerie_temp.rrd":{"address":null, "name":"","dpt":null},"HWR_temp.rrd":{"address":nu ll,"name":"","dpt":null},"Kinderbad_temp.rrd":{"ad dress":null,"name":"","dpt":null},"Kueche_temp.rrd ":{"address":null,"name":"","dpt":null},"WohnenEss en_temp.rrd":{"address":null,"name":"","dpt":null} ,"Zimmer1_temp.rrd":{"address":null,"name":"","dpt ":null},"Zimmer2_temp.rrd":{"address":null,"name": "","dpt":null},"Zimmer3_temp.rrd":{"address":null, "name":"","dpt":null},"eib_traffic.rrd":{"address" :null,"name":"","dpt":null},"wiregated-ow_cstime.rrd":{"address":null,"name":"","dpt":nul l},"wiregated-ow_cutime.rrd":{"address":null,"name":"","dpt":nul l},"wiregated-ow_mem.rrd":{"address":null,"name":"","dpt":null}, "wiregated-ow_stime.rrd":{"address":null,"name":"","dpt":null },"wiregated-ow_utime.rrd":{"address":null,"name":"","dpt":null },"wiregated_cstime.rrd":{"address":null,"name":"" ,"dpt":null},"wiregated_cutime.rrd":{"address":nul l,"name":"","dpt":null},"wiregated_mem.rrd":{"addr ess":null,"name":"","dpt":null},"wiregated_stime.r rd":{"address":null,"name":"","dpt":null},"wiregat ed_utime.rrd":{"address":null,"name":"","dpt":null }}

Ich denke mal, dass mir hier was in der owsensors.conf fehlt.

PS: Hab ein Clonegate, aber in vorigen Versionen vom Wiregate gingen meine Diagramme.

[greentux]

Soweit ich weiss, braucht es einen Patch im rrdtool. Gibts irgendwo im WG Repo...

[larsknx]

Danke dir .-)

genau das wars, habs neu kompiliert, Binaries ausgetauscht und funktioniert. Klasse