Ankündigung

Einklappen
Keine Ankündigung bisher.

- √ - Illuminating only when it is dark

Einklappen
X
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge

    HS/FS - √ - Illuminating only when it is dark

    Hi,

    I'm willing to illuminate my drive way when a car enters the property.
    I've no wheather station or light sensor.

    I would like to illuminate only when it's dark.
    I could do this with the UZSU but I want a variable time, i.e. days are getting shorter in the winter and longer in spring.
    Any suggestion about how to do that ?

    I know there are several Baustein about sun position, could the "Sonnenuntergang" do the trick ?
    If yes, what about the "Versatz" ? is it a delay after the sun goes down ?

    Thank you for any hint

    #2
    Hello Raymond,

    in Aviation ^night ops start +30mins after Sunset. Sunset would be available via SunPosition, elevation <= 0.

    Best regards
    2 Objekte, 6 Linien + KNX/IP-Bereich, HS 3 SW 2.8, Visu mit 2x 15"-Touch, Softwaregateway KNX/IP für 2x Novelan Wärmepumpe, viele Ideen und wenig Zeit

    Kommentar


      #3
      Zitat von swenga Beitrag anzeigen
      in Aviation ^night ops start +30mins after Sunset. Sunset would be available via SunPosition, elevation <= 0
      OK, fine
      Which Baustein would you recommend to do the trick ?

      Kommentar


        #4
        19820 SonnePur from MatthiasS. It even has a customizable Twilight-Output, where you can parametrize the angle below zero.

        mfg
        2 Objekte, 6 Linien + KNX/IP-Bereich, HS 3 SW 2.8, Visu mit 2x 15"-Touch, Softwaregateway KNX/IP für 2x Novelan Wärmepumpe, viele Ideen und wenig Zeit

        Kommentar


          #5
          Hi Raymond,

          you don't need any logic module for this, the UZSU will do the job. I add some screenshots, so you will know where to do the settings.
          Sunset, sunrise, offset, with random - all included. Let there be light!
          Angehängte Dateien
          Gruß, Rainer

          Kommentar


            #6
            Zitat von Taxus Beitrag anzeigen
            I add some screenshots, so you will know where to do the settings.
            Sorry, you lost me.
            I don't even recognize the menus you are showing.
            I'm using 2.5 standard, no QC.
            Are those menus specific to the QC ? or did you add some features ?

            Kommentar


              #7
              I don't use the QC. The design might be incidentally similar .
              Just create a new symbol and assign the action 'Universal-Zeitschaltuhr öffnen'.
              Angehängte Dateien
              Gruß, Rainer

              Kommentar


                #8
                Hallo Rainer,

                danke fuer die Info. Was die UZSU so alles kann, man lernt nie aus ;-)

                mfg
                2 Objekte, 6 Linien + KNX/IP-Bereich, HS 3 SW 2.8, Visu mit 2x 15"-Touch, Softwaregateway KNX/IP für 2x Novelan Wärmepumpe, viele Ideen und wenig Zeit

                Kommentar


                  #9
                  Hi Rainer,

                  Zitat von Taxus Beitrag anzeigen
                  Just create a new symbol and assign the action 'Universal-Zeitschaltuhr öffnen'.
                  Sorry to be a pain
                  I can indeed create a new symbol and assign the action 'Universal-Zeitschaltuhr öffnen' .... but there it stops
                  I don't see the relation with your previous screenshots
                  Should I create a new entry there ? (you might guess I'm not using the UZSU every day )

                  Thank you for your patience

                  Kommentar


                    #10
                    Did you assign an existing UZSU in the Tabsheet "Universal-Zeitschaltuhr", e.g. "UZSU WWSLT" ?
                    Then upload your Project and klick the newly created symbol. Voilà!
                    Gruß, Rainer

                    Kommentar


                      #11
                      What about adding WWSLT to the List of Abbreviations???

                      Cheers Stefan
                      p.s.: just kidding
                      Mein Sammelsurium: TS2, Zennio Z38, Siemens LOGO!, Medeodata 140 S, Weinzierl KNX ENO 620, Eibmarkt IP Router, MDT KNX IP IF, Wiregate, Node-Red mit KNX Ultimate, MDT Smart II, diverse Aktoren verschiedener Hersteller ...

                      Kommentar


                        #12
                        Zitat von Taxus Beitrag anzeigen
                        Did you assign an existing UZSU in the Tabsheet "Universal-Zeitschaltuhr", e.g. "UZSU WWSLT" ?
                        Then upload your Project and klick the newly created symbol. Voilà!
                        I'm happy to know it works for you.
                        For me, it's like doing a puzzle with pieces from another play, obviously they will never fit.

                        I give up !

                        Kommentar


                          #13
                          Zitat von swenga Beitrag anzeigen
                          19820 SonnePur from MatthiasS. It even has a customizable Twilight-Output, where you can parametrize the angle below zero.
                          Do you have a pointer to the help file of that Baustein, please ?

                          Kommentar


                            #14
                            Real programmers don't do documentation

                            Sorry, there is none.

                            But it is quite easy: It shows the location of the sun (azimuth and elevation).

                            Regarding elevation, there is a trigger output: Normally its getting dark if sun sets There are different grades of darkness according to the angle of the sun below the horizon. These angles are called:

                            Crépuscule nautique [modifier]




                            Près du crépuscule au Mexique.


                            Le crépuscule nautique est la période où le centre du Soleil est situé entre et 12° sous l'horizon.
                            Il s'agit du moment où les étoiles de deuxième grandeur deviennent visibles ; en même temps, en mer, la ligne d'horizon est toujours visible permettant ainsi de faire un point astronomique avec les étoiles. À la fin de cette période, en soirée, ou à son début, en matinée, les dernières ou premières lueurs peuvent être discernées dans la direction du Soleil.
                            Crépuscule astronomique [modifier]

                            Le crépuscule astronomique est la période où le centre du Soleil est situé entre 12° et 18° sous l'horizon.
                            Pendant le crépuscule astronomique, et dans le cas d'un ciel dégagé de toute pollution lumineuse, les étoiles les plus faibles visibles à l'œil nu, vers la magnitude apparente 6, apparaissent. Du point de vue astronomique, il subsiste cependant suffisamment de lumière pour que les objets diffus comme les nébuleuses ou les galaxies ne puissent pas être observés dans des conditions satisfaisantes, même si cette lumière est imperceptible à l'œil nu.
                            Le soir, la fin du crépuscule astronomique marque le début de la nuit complète ; le matin, c'est la fin de la nuit, l'apparition des toutes premières lueurs de l'aube.


                            Zitat Wikipedia


                            So the trigger output in my logic module is set to 6° by default. Depending on your location it could be necessary to enter a differnt angle.
                            Gruß Matthias
                            EIB übersetzt meine Frau mit "Ehepaar Ist Beschäftigt"
                            - PN nur für PERSÖNLICHES!

                            Kommentar


                              #15
                              Zitat von MatthiasS Beitrag anzeigen
                              Real programmers don't do documentation.
                              Grmbl, I think I've heard this before

                              Zitat von MatthiasS Beitrag anzeigen
                              But it is quite easy:.
                              It might be me being more dumb then the average

                              All I want is to enable the light be switched on when it is dark (so depending on the sun's position.

                              Do you think the output "Höhe" will do the job ?
                              If there is any postive number there, the sun is present and I disable the lights on.
                              If there is 0 or any negative number there, the sun is absent and I enable the lights on.
                              Is that correct ?

                              I see there are 2 other Baustein Sonneuntergang and Sonneaufgang, which have to be combined for a 24Hr cycle.
                              Any chance the logic below is correct ?
                              Angehängte Dateien

                              Kommentar

                              Lädt...
                              X