Night/day lights

[eyalpel]

Hi All
Sorry again for my Englisch...
May be someone can help me and give some guidelines how to do the following simple scene:
I have terrasse und Garten lampen, and i like to switch them on at 18:00 (for example) and turn them off at 06:00.
I have in my system (MDT) also Clock master (SCN-LCDGW.01) that can give me the time for the scene, but i still do not know how to use it.

Thanks a lot
Eyal

[KNXMane]

Hello Eyal

See http://www.mdt.de/download/MDT_TM_Gl...ation_Unit.pdf Page 106. You don't need a scene.

Markus

[eyalpel]

Thanks Markus
i hope that i understand it right, so actually i have to set 2 time switches from the Glass operation unit:
one for turn on and the second to turn off .
do i have to associate this function to the Aktor switch ?
here i attached small picture from my setup.

Thanks
Eyal

[PhilW]

Hey Eyal,

it's not that correct.
The Glassunit identifies two "switch functions", means Button C & and Button D (corresponding to the touch buttons C & D)
You chooses C=off and D=on.
In the timer-switch menue you define the time (here 18 and 6 o'clock). By choosing "Action aplies to" you connect the time to the action.
You choose twice Button C, so on 18 and 6 o'clock it sends an one bit value (here '0', because Button C=off).
To switch correct you have choose button D (D=on=Value '1') in 18 o'clock.
And then, for sure associate the "Timer 1" to the aktor like a normal Switch.

It's a little bit confusing with the glass unit but once you realize how to use it, it becomes logic..

PhilW

[eyalpel]

Thanks PhilW
So, if now i understand it right:
If C=on D=off
Time switch 1 refer to C (18:00 send ON to the switch)
Time switch 2 refer to D (06:00 send Off to the switch)
Am I right ?

Thanks
Eyal

[PhilW]

Yep...