Fehler: IrTrans does not send/learn commands

[Dries]

Hi,
(my apologies I'm writing this in English - feel free to respond in German).

I'm trying to connect my IRTrans with Edomi.
I have adapted edomi.ini to enable the IRTrans module and to specify the IP address.
I believe I have done it correctly, because I am able to reboot the IRTrans from Edomi.

However, I am unable to learn and IR command.
In "Konfiguration" => "IR-Befehle" I create a new command and click "Lernen". The outcome is always "Timeout oder fehler".
When I learn a command via the IRTrans software, it works fine.

I also tried to copy/paste an IR command from a generated REM file (see attach).
I have pasted IR code "0103033003210" in Edomi's field "IR Code". Nothing happens when I send the code.



What am I doing wrong?

[Robby]

1.png

Hast Du das Modul in der Konfiguration auch eingestellt? IP....Port usw.

[Brick]

Sending an IR Code is quite easy if you have the code in your irtrans database ...
try to send a http request .. i don't know the url out of my mind.. but its like
http://irtransip&remote&command

look in your manual..

[jonofe]

Have you tried to activate the Button "Raw/Binär Modus"?
You can activate it even it looks like it's grayed out. That worked for me.

[Brick]

so,

thats my config:

Bereich.png

works well...

[Dries]

Hi,
Thanks for the replies!

I think I did the proper configurations in edomi.ini:

# Modul: IRtrans
#    Aktiviert oder deaktiviert das Modul "IRtrans" (Konfiguration des Moduls erforderlich!)
#    true = aktiviert
#    false = deaktiviert
global_irGatewayActive=true

# ---------------------------------------------------------------------
# Modul-Konfiguration: IRtrans
# ---------------------------------------------------------------------

# IRtrans: IP-Adresse
global_irIp='192.168.3.14'

# Telnet/UDP-Port
#    Port zur Kommunikation mit dem IRtrans.
global_irPort=21000

# Maximale Wartezeit beim Anlernen eines IR-Codes
#    Innerhalb dieser Zeit muss während des Anlernens ein IR-Code empfangen werden.
#    1..oo = Wartezeit in Sekunden
global_irTimeout=5

I played around with the buttons "Long-IR code", "RAW/Binär Modus", without success.

Maybe I should indeed not configure an "IF-befehl" but an HTTP-GET request. This seems to work fine:
http://192.168.3.14/send.htm?remote=telenet&command=on

But I wonder, why does Edomi have the build-in IR-module then? Any advantages?