SmartHome.py 1.0 Release & SmartHome.Pi 2.1

[macflei]

want to update read only item

hast Du noch visu = yes im item?
änder das mal in visu_acl = rw

[Oscarchen]

want to update read only item

hast Du noch visu = yes im item?
änder das mal in visu_acl = rw

Super!!! Das wars - alles funktioniert prima!!!
Macht immer wieder Spaß mit Profis zusammenzuarbeiten....
Besten Dank
bis bald

[callidomus]

Hallo Michael,

das benutzt noch jemand? Ich freue mich zwar, habe aber nicht damit gerechnet.

gibt es in der neuen Version den Generator für die HTML5 Seiten nicht mehr ?

Ein Wechsel auf smartVISU scheidet aus? Das ist die Zukunft der GUI.
Wie fit bist Du mit Python? Es sollte relativ einfach möglich sein, das wieder einzubauen.

Bis bald

Marcus

[clown]

Hallo Markus,

ja, fand die "alte" Methode ohne schnickschnack besser, werde mich dann halt dran machen meine Sachen umzustellen.

Macht ja keinen Sinn wenn Du es nicht weiter supportest, dann habe ich immer eine Sonderlocke.

Trotzdem danke für Deine unglaublich tolle Software.

Gruß
Michael

[Oscarchen]

Hallo nochmal,

habe mal noch eine Frage. Wie lege ich die Nachkommastellen bei den Temperaturwerten fest?? Möchte gerne nur eine Stelle nach dem Komma haben (0,1)
wenn möglich auch nicht dynamisch, sondern fest (z.B. 30,0)
Gruß
Heiko

[callidomus]

Hallo Heiko,

erstens solltest Du die Sufu benutzen, die Frage wurde schon öfter gestellt. Zweitens wäre dafür ein eigener Thread sinnvoll, wenn Du nichts findest.

Bis bald

Marcus

[sirgalahad4]

Hallo,

auch von mir noch ein Dankeschön für das gelungene 1.0.

Enrico

[valleyman]

Bedanken möchte ich mich natürlich auch !!!
Darüberhinaus kämpfe ich allerdings mit einem Problem welches ich derzeit immer noch nicht genau zuordnen kann (entweder liegt die Ursache bei mir, beim Russound Plugin oder im neuen Image. Kann natürlich auch eine Mischung sein.

Um Doppelposts zu vermeiden:
https://knx-user-forum.de/354835-post40.html

Wäre toll wenn mir jemand einen Hinweis oder gar die Lösung zum Fehler sagt.

Danke vorab

Sven

[geertg]

Not able to write KNX telegrams

Hi,

I don't know what's wrong. When I start up
/usr/smarthome/bin/smarthome.py --start I can see the read commands at ETS bus monitor. Every 60 sec Smarthome send the time and date but I am UNABLE to switch or dim lights. What could be the problem?

Thanks,



Geert

[2ndsky]

Hi Geert,

start sh.py in debug mode "smarthome.py -d" and post the output here.

BR
Niko

[geertg]

Hi Geert,

start sh.py in debug mode "smarthome.py -d" and post the output here.

BR
Niko

Hi Niko,

Thanks for your help. What I see is that there seems to be no connection between the Smartvisu and smarthome.py. I use a demo project and changed some groupsadresses.

login as: admin
admin@192.168.0.156's password:
Linux smarthome.local 3.10.18+ #594 PREEMPT Wed Nov 13 17:59:34 GMT 2013 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Thu Nov 21 07:30:53 2013 from hp-elitebook.local
admin@smarthome:/usr/smarthome$ /usr/smarthome/bin/smarthome.py --stop
admin@smarthome:/usr/smarthome$ /usr/smarthome/bin/smarthome.py -d
2013-11-21 09:05:35,378 INFO Main Start SmartHome.py 1.0-1-g478b5cb+ -- smarthome.py:__init__:231
2013-11-21 09:05:35,383 DEBUG Main Python 3.2.3 -- smarthome.py:__init__:232
2013-11-21 09:05:35,389 INFO Main Init Scheduler -- scheduler.py:__init__:86
2013-11-21 09:05:35,396 INFO Main Init Plugins -- smarthome.py:start:274
2013-11-21 09:05:35,408 DEBUG Scheduler creating 5 workers -- scheduler.py:run:93
2013-11-21 09:05:35,418 DEBUG Main Plugin: knx -- plugin.py:__init__:43
2013-11-21 09:05:35,452 DEBUG Main KNX time next time: 2013-11-21 09:05:50+01:00 -- scheduler.py:_next_time:289
2013-11-21 09:05:35,461 DEBUG Main Plugin: visu -- plugin.py:__init__:43
2013-11-21 09:05:35,546 DEBUG Main Plugin: cli -- plugin.py:__init__:43
2013-11-21 09:05:35,558 DEBUG Main Plugin: sql -- plugin.py:__init__:43
2013-11-21 09:05:35,591 DEBUG Main SQLite 3.7.13 -- __init__.py:__init__:62
2013-11-21 09:05:35,721 DEBUG Main SQLite: database integrity ok -- __init__.py:__init__:78
2013-11-21 09:05:35,748 DEBUG Main SQLite pack next time: 2013-11-22 03:02:00+01:00 -- scheduler.py:_next_time:289
2013-11-21 09:05:35,754 INFO Main Init Items -- smarthome.py:start:280
2013-11-21 09:05:35,815 DEBUG Main KNX: EG.Raum00.1.dimmen listen on 0/4/17 -- __init__.pyarse_item:235
2013-11-21 09:05:35,819 DEBUG Main KNX: EG.Raum00.1.dimmen listen on and init with 0/4/17 -- __init__.pyarse_item:244
2013-11-21 09:05:35,824 DEBUG Main KNX: EG.Raum00.1 listen on 0/3/17 -- __init__.pyarse_item:235
2013-11-21 09:05:35,828 DEBUG Main KNX: EG.Raum00.1 listen on and init with 0/3/17 -- __init__.pyarse_item:244
2013-11-21 09:05:35,838 DEBUG Main KNX: EG.Raum00.2 listen on 0/0/4 -- __init__.pyarse_item:235
2013-11-21 09:05:35,843 DEBUG Main KNX: EG.Raum00.2 listen on and init with 0/0/4 -- __init__.pyarse_item:244
2013-11-21 09:05:35,848 DEBUG Main Item EG.Raum00: no type specified. -- item.py:__init__:242
2013-11-21 09:05:35,853 DEBUG Main Item EG: no type specified. -- item.py:__init__:242
2013-11-21 09:05:35,903 DEBUG Main Item env.core.memory = 12420657.049397152 via SQLite None None -- item.py:set:457
2013-11-21 09:05:35,942 DEBUG Main Item env.core.threads = 7.0 via SQLite None None -- item.py:set:457
2013-11-21 09:05:35,980 DEBUG Main Item env.core.garbage = 0.0 via SQLite None None -- item.py:set:457
2013-11-21 09:05:35,987 DEBUG Main Item env.core: no type specified. -- item.py:__init__:242
2013-11-21 09:05:36,027 DEBUG Main Item env.location: no type specified. -- item.py:__init__:242
2013-11-21 09:05:36,069 DEBUG Main Item env.system.load = 0.23698689551331192 via SQLite None None -- item.py:set:457
2013-11-21 09:05:36,080 DEBUG Main Item env.system: no type specified. -- item.py:__init__:242
2013-11-21 09:05:36,085 DEBUG Main Item env: no type specified. -- item.py:__init__:242
2013-11-21 09:05:36,092 INFO Main Start Plugins -- plugin.py:start:65
2013-11-21 09:05:36,143 INFO Main Start Logics -- logic.py:__init__:33
2013-11-21 09:05:36,148 DEBUG Main Reading Logics from /usr/smarthome/lib/env/logic_conf -- logic.py:_read_logics:64
2013-11-21 09:05:36,169 DEBUG Main Reading Logics from /usr/smarthome/etc/logic.conf -- logic.py:_read_logics:64
2013-11-21 09:05:36,204 DEBUG Main Logic: dummy -- logic.py:__init__:44
2013-11-21 09:05:36,211 WARNING Main dummy: Could not access logic file (/usr/smarthome/logics/dummy_series.py) => ignoring. -- logic.py:generate_bytecode:114
2013-11-21 09:05:36,225 DEBUG Main Logic: hello -- logic.py:__init__:44
2013-11-21 09:05:36,266 DEBUG Main Logic: env_init -- logic.py:__init__:44
2013-11-21 09:05:36,280 DEBUG Main Logic: env_stat -- logic.py:__init__:44
2013-11-21 09:05:36,295 DEBUG Main env_stat next time: 2013-11-21 09:05:47+01:00 -- scheduler.py:_next_time:289
2013-11-21 09:05:36,300 DEBUG Main Logic: env_loc -- logic.py:__init__:44
2013-11-21 09:05:36,558 DEBUG Connections KNX: connected to 127.0.0.1:6720 -- connection.py:connect:384
2013-11-21 09:05:36,564 DEBUG Connections KNX: enable group monitor -- __init__.py:handle_connect:117
2013-11-21 09:05:36,568 DEBUG Connections KNX: init read -- __init__.py:handle_connect:123
2013-11-21 09:05:36,576 DEBUG Connections WebSocket: binding to 0.0.0.0:2424 (TCP) -- connection.py:connect:160
2013-11-21 09:05:36,583 DEBUG Connections CLI: binding to 0.0.0.0:2323 (TCP) -- connection.py:connect:160
2013-11-21 09:05:37,324 DEBUG Main KNX: 0.0.0 read 0/4/17 -- __init__.pyarse_telegram:203
2013-11-21 09:05:37,336 DEBUG Main KNX: 0.0.0 read 0/3/17 -- __init__.pyarse_telegram:203
2013-11-21 09:05:37,343 DEBUG Main KNX: 0.0.0 read 0/0/4 -- __init__.pyarse_telegram:203
2013-11-21 09:05:37,381 DEBUG Main knx: 1.1.3 set 0/4/17 to 0 -- __init__.pyarse_telegram:190
2013-11-21 09:05:37,442 DEBUG Main knx: 1.1.1 set 0/0/17 to 00 -- __init__.pyarse_telegram:181
2013-11-21 09:05:37,464 DEBUG Main knx: 1.1.3 set 0/3/17 to False -- __init__.pyarse_telegram:190
2013-11-21 09:05:37,484 DEBUG Main knx: 1.1.1 set 0/0/17 to 00 -- __init__.pyarse_telegram:181
2013-11-21 09:05:37,509 DEBUG Main knx: 1.1.1 set 0/0/4 to True -- __init__.pyarse_telegram:190
2013-11-21 09:05:37,516 DEBUG Main Item EG.Raum00.2 = True via KNX 1.1.1 0/0/4 -- item.py:__update:363
2013-11-21 09:05:41,577 DEBUG env_loc Item env.location.sunrise = 2013-11-22 07:46:11.369335+01:00 via Logic None None -- item.py:__update:363
2013-11-21 09:05:41,580 DEBUG sh.gc Garbage collector: collected 0 objects. -- smarthome.py:_garbage_collection:498
2013-11-21 09:05:41,584 DEBUG env_init Item env.core.version = 1.0-1-g478b5cb+ via Logic None None -- item.py:__update:363
2013-11-21 09:05:41,579 INFO hello Hello World! -- hello.py:<module>:3
2013-11-21 09:05:41,614 DEBUG env_init Item env.core.start = 2013-11-21 09:05:41.610858+01:00 via Logic None None -- item.py:__update:363
2013-11-21 09:05:41,643 DEBUG env_loc Item env.location.sunset = 2013-11-21 16:23:07.783942+01:00 via Logic None None -- item.py:__update:363
2013-11-21 09:05:41,663 DEBUG env_init Item env.system.name = smarthome.local via Logic None None -- item.py:__update:363
2013-11-21 09:05:41,704 DEBUG env_init Item env.system.start = 2013-11-21 09:01:11.700526+01:00 via Logic None None -- item.py:__update:363
2013-11-21 09:05:41,762 DEBUG env_loc Item env.location.moonrise = 2013-11-21 19:46:41.011596+01:00 via Logic None None -- item.py:__update:363
2013-11-21 09:05:41,839 DEBUG env_loc Item env.location.moonset = 2013-11-21 10:39:14.958530+01:00 via Logic None None -- item.py:__update:363
2013-11-21 09:05:41,870 DEBUG env_loc Item env.location.moonphase = 5 via Logic None None -- item.py:__update:363
2013-11-21 09:05:41,935 DEBUG sh.gc Object references: 8960 -- smarthome.py:_maintenance:490
2013-11-21 09:05:41,940 DEBUG env_loc Item env.location.day = True via Logic None None -- item.py:__update:363
2013-11-21 09:05:42,132 DEBUG Scheduler env_loc next time: 2013-11-21 09:35:42+01:00 -- scheduler.py:_next_time:289
2013-11-21 09:05:42,154 DEBUG Scheduler sh.gc next time: 2013-11-22 02:04:00+01:00 -- scheduler.py:_next_time:289
2013-11-21 09:05:47,245 DEBUG env_stat Item env.core.memory = 13348864 via Logic None None -- item.py:__update:363
2013-11-21 09:05:47,254 DEBUG env_stat Item env.system.load = 0.28 via Logic None None -- item.py:__update:363
2013-11-21 09:05:47,263 DEBUG env_stat Item env.location.moonlight = 88 via Logic None None -- item.py:__update:363
2013-11-21 09:05:47,697 DEBUG Scheduler env_stat next time: 2013-11-21 09:10:47+01:00 -- scheduler.py:_next_time:289
2013-11-21 09:05:50,220 DEBUG Main knx: 0.0.0 set 1/1/1 to 890532 -- __init__.pyarse_telegram:181
2013-11-21 09:05:50,234 DEBUG Main knx: 0.0.0 set 1/1/2 to 150b0d -- __init__.pyarse_telegram:181
2013-11-21 09:05:50,728 DEBUG Scheduler KNX time next time: 2013-11-21 09:06:50+01:00 -- scheduler.py:_next_time:289
2013-11-21 09:05:54,333 DEBUG Main knx: 1.1.27 set 2/0/7 to 0669 -- __init__.pyarse_telegram:181
2013-11-21 09:05:54,594 DEBUG Main knx: 1.1.20 set 2/0/0 to 07f8 -- __init__.pyarse_telegram:181
2013-11-21 09:06:01,050 DEBUG Main knx: 1.1.28 set 2/0/4 to 0715 -- __init__.pyarse_telegram:181
2013-11-21 09:06:01,366 DEBUG Main knx: 1.1.23 set 2/0/5 to 06c7 -- __init__.pyarse_telegram:181
2013-11-21 09:06:05,624 DEBUG Main knx: 1.1.21 set 2/0/1 to 0c06 -- __init__.pyarse_telegram:181
2013-11-21 09:06:29,753 DEBUG Main knx: 1.1.20 set 2/1/4 to 01 -- __init__.pyarse_telegram:181
2013-11-21 09:06:30,582 DEBUG Main knx: 1.1.20 set 2/0/0 to 0c01 -- __init__.pyarse_telegram:181
2013-11-21 09:06:50,503 DEBUG Main knx: 0.0.0 set 1/1/1 to 890632 -- __init__.pyarse_telegram:181
2013-11-21 09:06:50,515 DEBUG Main knx: 0.0.0 set 1/1/2 to 150b0d -- __init__.pyarse_telegram:181
2013-11-21 09:06:51,010 DEBUG Scheduler KNX time next time: 2013-11-21 09:07:51+01:00 -- scheduler.py:_next_time:289
2013-11-21 09:07:00,423 DEBUG Main knx: 1.1.24 set 2/0/3 to 07f3 -- __init__.pyarse_telegram:181
2013-11-21 09:07:05,856 DEBUG Main knx: 1.1.25 set 2/0/2 to 0782 -- __init__.pyarse_telegram:181
admin@smarthome:/usr/smarthome$ /usr/smarthome/bin/smarthome.py -d
2013-11-21 09:05:35,378 INFO Main Start SmartHome.py 1.0-1-g478b5cb+ -- smarthome.py:__init__:231
2013-11-21 09:05:35,383 DEBUG Main Python 3.2.3 -- smarthome.py:__init__:232
2013-11-21 09:05:35,389 INFO Main Init Scheduler -- scheduler.py:__init__:86
2013-11-21 09:05:35,396 INFO Main Init Plugins -- smarthome.py:start:274
2013-11-21 09:05:35,408 DEBUG Scheduler creating 5 workers -- scheduler.py:run:93
2013-11-21 09:05:35,418 DEBUG Main Plugin: knx -- plugin.py:__init__:43
2013-11-21 09:05:35,452 DEBUG Main KNX time next time: 2013-11-21 09:05:50+01:00 -- scheduler.py:_next_time:289
2013-11-21 09:05:35,461 DEBUG Main Plugin: visu -- plugin.py:__init__:43
2013-11-21 09:05:35,546 DEBUG Main Plugin: cli -- plugin.py:__init__:43
2013-11-21 09:05:35,558 DEBUG Main Plugin: sql -- plugin.py:__init__:43
2013-11-21 09:05:35,591 DEBUG Main SQLite 3.7.13 -- __init__.py:__init__:62
2013-11-21 09:05:35,721 DEBUG Main SQLite: database integrity ok -- __init__.py:__init__:78
2013-11-21 09:05:35,748 DEBUG Main SQLite pack next time: 2013-11-22 03:02:00+01:00 -- scheduler.py:_next_time:289
2013-11-21 09:05:35,754 INFO Main Init Items -- smarthome.py:start:280
2013-11-21 09:05:35,815 DEBUG Main KNX: EG.Raum00.1.dimmen listen on 0/4/17 -- __init__.pyarse_item:235
2013-11-21 09:05:35,819 DEBUG Main KNX: EG.Raum00.1.dimmen listen on and init with 0/4/17 -- __init__.pyarse_item:244
2013-11-21 09:05:35,824 DEBUG Main KNX: EG.Raum00.1 listen on 0/3/17 -- __init__.pyarse_item:235
2013-11-21 09:05:35,828 DEBUG Main KNX: EG.Raum00.1 listen on and init with 0/3/17 -- __init__.pyarse_item:244
2013-11-21 09:05:35,838 DEBUG Main KNX: EG.Raum00.2 listen on 0/0/4 -- __init__.pyarse_item:235
2013-11-21 09:05:35,843 DEBUG Main KNX: EG.Raum00.2 listen on and init with 0/0/4 -- __init__.pyarse_item:244
2013-11-21 09:05:35,848 DEBUG Main Item EG.Raum00: no type specified. -- item.py:__init__:242
2013-11-21 09:05:35,853 DEBUG Main Item EG: no type specified. -- item.py:__init__:242
2013-11-21 09:05:35,903 DEBUG Main Item env.core.memory = 12420657.049397152 via SQLite None None -- item.py:set:457
2013-11-21 09:05:35,942 DEBUG Main Item env.core.threads = 7.0 via SQLite None None -- item.py:set:457
2013-11-21 09:05:35,980 DEBUG Main Item env.core.garbage = 0.0 via SQLite None None -- item.py:set:457
2013-11-21 09:05:35,987 DEBUG Main Item env.core: no type specified. -- item.py:__init__:242
2013-11-21 09:05:36,027 DEBUG Main Item env.location: no type specified. -- item.py:__init__:242
2013-11-21 09:05:36,069 DEBUG Main Item env.system.load = 0.23698689551331192 via SQLite None None -- item.py:set:457
2013-11-21 09:05:36,080 DEBUG Main Item env.system: no type specified. -- item.py:__init__:242
2013-11-21 09:05:36,085 DEBUG Main Item env: no type specified. -- item.py:__init__:242
2013-11-21 09:05:36,092 INFO Main Start Plugins -- plugin.py:start:65
2013-11-21 09:05:36,143 INFO Main Start Logics -- logic.py:__init__:33
2013-11-21 09:05:36,148 DEBUG Main Reading Logics from /usr/smarthome/lib/env/logic_conf -- logic.py:_read_logics:64
2013-11-21 09:05:36,169 DEBUG Main Reading Logics from /usr/smarthome/etc/logic.conf -- logic.py:_read_logics:64
2013-11-21 09:05:36,204 DEBUG Main Logic: dummy -- logic.py:__init__:44
2013-11-21 09:05:36,211 WARNING Main dummy: Could not access logic file (/usr/smarthome/logics/dummy_series.py) => ignoring. -- logic.py:generate_bytecode:114
2013-11-21 09:05:36,225 DEBUG Main Logic: hello -- logic.py:__init__:44
2013-11-21 09:05:36,266 DEBUG Main Logic: env_init -- logic.py:__init__:44
2013-11-21 09:05:36,280 DEBUG Main Logic: env_2013-11-21 09:07:42,754 DEBUG Main knx: 1.1.20 set 2/0/0 to 07f8 -- __init__.pyarse_telegram:181
2013-11-21 09:07:51,279 DEBUG Main knx: 0.0.0 set 1/1/1 to 890733 -- __init__.pyarse_telegram:181
2013-11-21 09:07:51,291 DEBUG Main knx: 0.0.0 set 1/1/2 to 150b0d -- __init__.pyarse_telegram:181
2013-11-21 09:07:51,786 DEBUG Scheduler KNX time next time: 2013-11-21 09:08:51+01:00 -- scheduler.py:_next_time:289
2013-11-21 09:07:57,496 DEBUG Main knx: 1.1.20 set 2/1/0 to 0c1a -- __init__.pyarse_telegram:181
2013-11-21 09:07:57,867 DEBUG Main knx: 1.1.20 set 2/0/0 to 0c01 -- __init__.pyarse_telegram:181
2013-11-21 09:08:42,867 DEBUG Main knx: 1.1.20 set 2/1/4 to 01 -- __init__.pyarse_telegram:181
2013-11-21 09:08:51,049 DEBUG Main knx: 0.0.0 set 1/1/1 to 890833 -- __init__.pyarse_telegram:181
2013-11-21 09:08:51,060 DEBUG Main knx: 0.0.0 set 1/1/2 to 150b0d -- __init__.pyarse_telegram:181
2013-11-21 09:08:51,556 DEBUG Scheduler KNX time next time: 2013-11-21 09:09:51+01:00 -- scheduler.py:_next_time:289

[Chefkoch81]

Hi,

Ich habe mir bei der Ankündigung, dass jetzt alles fertig ist das Image vom 14.11.2013 runtergeladen.

Ich habe jetzt bemerkt, dass bei mir nicht Versiojn 1.0 drauf ist, sondern:
2013-11-21 17:17:15,471 INFO Main Start SmartHome.py 0.9-515-ge828b6c -- smarthome.py:__init__:231

Kann ich mit einem GIT oder SVN Befehl updaten?

lg

[Giraz]

I downloaded 14/11/2013 image, and I was going to install it, but now I see two more version here:
2013-11-16.img.zip
and
2013-11-16_2.img.zip

Which is the last and which difference are there?

Thank you

[callidomus]

Hi Stefano,

just take the latest 2013-11-16_2.img.zip

so long

Marcus

[geertg]

Hi Geert,

start sh.py in debug mode "smarthome.py -d" and post the output here.

BR
Niko

HI,

EIBD is running but no connection between Smarthome Visu and the smarthome loge. If we use EIBD what does we set for the IP and port on the configuration port.