"OR KNX" App für das IPhone?!

[Brick]

vpncfg {
connections {
enabled = yes;
conn_type = conntype_user;
name = "xxx@gmail.com";
always_renew = no;
reject_not_encrypted = no;
dont_filter_netbios = yes;
localip = 0.0.0.0;
local_virtualip = 0.0.0.0;
remoteip = 0.0.0.0;
remote_virtualip = 192.168.1.202;
remoteid {
key_id = "xxx@gmail.com";
}
mode = phase1_mode_aggressive;
phase1ss = "all/all/all";
keytype = connkeytype_pre_shared;
key = "mykey";
cert_do_server_auth = no;
use_nat_t = yes;
use_xauth = yes;
use_cfgmode = no;
xauth {
valid = yes;
username = "myusername";
passwd = "mypassword";
}
phase2localid {
ipnet {
ipaddr = 0.0.0.0;
mask = 0.0.0.0;
}
}
phase2remoteid {
ipaddr = 192.168.1.202;
}
phase2ss = "esp-all-all/ah-none/comp-all/no-pfs";
accesslist =
"permit ip 0.0.0.0 0.0.0.0 192.168.1.202 255.255.255.255";
}
ike_forward_rules = "udp 0.0.0.0:500 0.0.0.0:500",
"udp 0.0.0.0:4500 0.0.0.0:4500";

Irgendwie sieht mein Config File auch anders aus.. !?!?

*/

vpncfg {
connections {
enabled = yes;
conn_type = conntype_user;
name = "myname";
always_renew = no;
reject_not_encrypted = no;
dont_filter_netbios = yes;
localip = 0.0.0.0;
local_virtualip = 0.0.0.0;
remoteip = 0.0.0.0;
remote_virtualip = 192.168.178.24;
remoteid {
user_fqdn = "myname";
}
mode = phase1_mode_aggressive;
phase1ss = "all/all/all";
keytype = connkeytype_pre_shared;
key = "mykey";
cert_do_server_auth = no;
use_nat_t = yes;
use_xauth = no;
use_cfgmode = no;
phase2localid {
ipnet {
ipaddr = 192.168.178.1;
mask = 255.255.255.255;
}
}
phase2remoteid {
ipaddr = 192.168.178.24;
}
phase2ss = "esp-all-all/ah-none/comp-all/pfs";
accesslist =
"permit ip 192.168.178.1 255.255.255.255 192.168.178.24 255.255.255.255";
}
ike_forward_rules = "udp 0.0.0.0:500 0.0.0.0:500",
"udp 0.0.0.0:4500 0.0.0.0:4500";
}


// EOF

außerdem irriteren mich die 255.255.255.255 .. irgendwie

[Brick]

So.. jetzt gehts... es lag tatsächlich an der 255.255.255.255..

wie doof.. das wurde als standardeinstellung im AVM Fernzugang eingestellt.. musst das ganze Profil neu machen... mit manueller eingabe... !!

jetzt kann ich ma auch die Fullversion zulegen.. super.. )