Jung LS 5094 TSM - 2 channel operation

[sx3]

Hello,

I'm using Jung LS 5094 TSM in my project and just found out that the 2-channel operation is pretty useless compared to other brands. I'm missing the 4-bit dimming operation i 2-channel mode.
In my experience this i common feature when talking 2-channel operation. especially in a modern and top-of-the-line push button.

I want to recall scenes with short press, and dim with long press without storage. I know it's possible to solve with some logic functions, but I like to keep functions simple and not use more external logic than needed =/.

Anyone know if there's FW/database update comming soon for the LS50? Perhaps this function will be implemented in this otherwise very powerful pushbutton!

Thanks!

[Henk]

Hello

no!

you Can use The two-Button funktion

short press Switch 1bit
long press dimm 4 bit

and with two Buttons (left and right at the same time) call a Szene 1byte

the funktions are permantly set in swich, dimm, shutter ...

bye

[sx3]

Thanks, that's what I found out aswell that theres a "Full Surface" option.. But it seems like I can't do what I intend to do with 2 scenes and dimming..
I might have to solve it with Logic operation. Sending a 1 bit that translates to a 1 byte value. But I really don't want the Project to depend on the logic module, because if it gets broken the whole house will go down, which is pretty bad.

I really can't understand why Jung doesn't have the 4-bit option in 2 channel operation, it's such a basic feature.

[8ball]

Hi,

It looks like I have ran into same issue.
I use Jung 419x TSM switches and MDT dimmers.
What would be the easiest way to get scenes and dimming on same button?