homebridge-knx 0.3.0 alpha (Apple HomeKit interface)

[christian7]

okay danke ich werde mir mal was einfallen lassen.

aber Trotzdem Vielen Vielen Dank für deine Hilfe!

[tunneltruppe]

Ehrlich gesagt:
Ne lieber nicht!!! Ich hab es leider nicht mir aufgeschrieben, aber hier im Forumsbeitrag
musst Du noch mal lesen!!
ABER mach Dir immer schön image nach jedem Step!!!!
Dann ist es nicht sooo schlimm....
Aber der link ist auf jeden Fall eine wichtige Richtung!!!

Ach ja: Du Ordnerinstallation ist wichtig!!!!

[tunneltruppe]

Nur mal was zu den Kameras.
Ich konnte folgende Kameras einbinden:
1.) INSTAR Typ: IN5905HD und IN-6012HD
2.) ABUS TVIP21552, TV7240, TVIP11502..
Vielleicht hilft es jemanden...

[christian7]

okay dann werde ich mal von neuen anfangen müssen.

kannst du mir einen tipp für die "Richtige" und auch aktuell Anleitung geben?

https://www.boernyblog.de/raspberry-pi-3-als-knx-bridge-fuer-ios-homekit/

ich hätte jetzt mal wieder mit der probiert. also morgen....

[tunneltruppe]

...das kann ich Dir nicht sagen!!!
Kann Dir nur eins sagen:
Ich habe nach jeder Installation (also erst jessie, dann knxd, dann smarthoneNG, dann homebridge)
immer ein image gezogen.
So konnte ich immer wieder auf eine "Grundinstallation" aufsetzen (hat mir viel Zeit erspart).

[christian7]

unter /home/pi/.npm/homebridge hab ich zb. zwei Ordner 0.3.4 und 0.4.9 ...

ich könnte gerade des teil wieder gegen die wand klatschen..... sorry warum habe ich nur da wieder hingelangt ist doch alles gelaufen okay unter Version 0.2 aber was es lief doch soweit

[christian7]

Okay wenn es so wäre was muss ich machen? alles Neu??
... kann man den was retten?

[tunneltruppe]

ooohh... dann hast Du wie alle "Anfänger" hier die zwei Anleitungen durcheinander bekommen
(denke ich, war bei mir so). Ich hatte dann alles, natürlich mehrmals, kotz, neu aufgesetzt
und nochmals tausendmal hier den Forumsbeitrag durchgesehen.
Kann sein das Du im Ordner pi alles installiert hast (suche mal hier!!!)
Viel Spass....

[christian7]

unter /usr/lib/node_modules habe ich nur einen Ordner NPM.

oder bin ich jetzt im falschen unterwegs?


edit: muss ich unter /home/pi/node_modules/homebridge/bin/ suchen??

[tunneltruppe]

sudo systemctl status homebridge
und
sudo systemctl stop homebridge
und
sudo systemctl start homebridge

zum Steuern der homebridge!! Schon mal merken!!!

Dann mal stoppen!!
Dann mal sehen ob die homebridge Datei im Ordnersystem:
Installationsrdner der homebridge:
/usr/lib/node_modules/homebridge/bin
liegt.
Da rein gehen und mal homebridge eingeben!!

[christian7]

[B]pi@raspberrypi[/B]:[B]~ $[/B] sudo systemctl status homebridge

[B]●[/B] homebridge.service - Homebridge Automation Service

   Loaded: loaded (/etc/systemd/system/homebridge.service; enabled)

   Active: [B]active (running)[/B] since Mo 2016-11-21 21:37:03 CET; 358ms ago

     Docs: https://github.com/nfarina/homebridge

 Main PID: 3799 (node)

   CGroup: /system.slice/homebridge.service

           └─3799 /usr/bin/node /home/pi/node_modules/homebridge/bin/homebridge -D




Nov 21 21:37:03 raspberrypi systemd[1]: Starting Homebridge Automation Service...

Nov 21 21:37:03 raspberrypi systemd[1]: Started Homebridge Automation Service.

[christian7]

[B]pi@raspberrypi[/B]:[B]~ $[/B] sudo systemctl status homebridge

[B]●[/B] homebridge.service - Homebridge Automation Service

   Loaded: loaded (/etc/systemd/system/homebridge.service; enabled)

   Active: [B]failed[/B] (Result: start-limit) since Mo 2016-11-21 19:47:26 CET; 1h 43min ago

     Docs: https://github.com/nfarina/homebridge

  Process: 530 ExecStart=/usr/bin/node /home/pi/node_modules/homebridge/bin/homebridge -D [B](code=exited, status=1/FAILURE)[/B]

 Main PID: 530 (code=exited, status=1/FAILURE)




Nov 21 19:47:25 raspberrypi homebridge.service[530]: at startup (bootstrap_node.js:149:9)

Nov 21 19:47:25 raspberrypi homebridge.service[530]: at bootstrap_node.js:509:3

Nov 21 19:47:25 raspberrypi systemd[1]: [B]homebridge.service: main process exited, code=exited, status=1/FAILURE[/B]

Nov 21 19:47:25 raspberrypi systemd[1]: [B]Unit homebridge.service entered failed state.[/B]

Nov 21 19:47:26 raspberrypi systemd[1]: homebridge.service holdoff time over, scheduling restart.

Nov 21 19:47:26 raspberrypi systemd[1]: Stopping Homebridge Automation Service...

Nov 21 19:47:26 raspberrypi systemd[1]: Starting Homebridge Automation Service...

Nov 21 19:47:26 raspberrypi systemd[1]: [B]homebridge.service start request repeated too quickly, refusing to start.[/B]

Nov 21 19:47:26 raspberrypi systemd[1]: [B]Failed to start Homebridge Automation Service.[/B]

Nov 21 19:47:26 raspberrypi systemd[1]: [B]Unit homebridge.service entered failed state.[/B]

kommt das...

[tunneltruppe]

Was sagt das system damit:
sudo systemctl status homebridge

[tunneltruppe]

Hast Du den Autostart schon eingerichtet?

[christian7]

Jaein.... ja dachte ich schon war aber irgendwie nicht der fall... Aber jetzt ist sie sicher da aber es kommt die nächste Meldung

[B]pi@raspberrypi[/B]:[B]~ $[/B] homebridge

*** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi.

*** WARNING *** Please fix your application to use the native API of Avahi!

*** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node>

*** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi.

*** WARNING *** Please fix your application to use the native API of Avahi!

*** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node&f=DNSServiceRegister>

[2016-11-21 21:24:14] Loaded plugin: homebridge-camera-ffmpeg

[2016-11-21 21:24:14] Registering platform 'homebridge-camera-ffmpeg.Camera-ffmpeg'

[2016-11-21 21:24:14] ---

[2016-11-21 21:24:14] Loaded plugin: homebridge-hdmi

[2016-11-21 21:24:14] Registering accessory 'homebridge-hdmi.TV'

[2016-11-21 21:24:14] Registering accessory 'homebridge-hdmi.AMP'

[2016-11-21 21:24:14] ---

[2016-11-21 21:24:14] Loaded plugin: homebridge-knx

homebridge API version: 2.1

[2016-11-21 21:24:14] Registering platform 'homebridge-knx.KNX'

[2016-11-21 21:24:14] ---

[2016-11-21 21:24:14] Loaded plugin: homebridge-luxtronik2

[2016-11-21 21:24:14] Registering accessory 'homebridge-luxtronik2.temperature'

[2016-11-21 21:24:14] ---

[2016-11-21 21:24:15] Loaded plugin: homebridge-nukiio

[2016-11-21 21:24:15] Registering platform 'homebridge-nukiio.NukiBridge'

[2016-11-21 21:24:15] Registering accessory 'homebridge-nukiio.NukiLock'

[2016-11-21 21:24:15] Registering accessory 'homebridge-nukiio.NukiBridgeMaintainanceSwitch'

[2016-11-21 21:24:15] ---

[2016-11-21 21:24:15] Loaded plugin: homebridge-panasonictv

[2016-11-21 21:24:15] Registering accessory 'homebridge-panasonictv.TV'

[2016-11-21 21:24:15] ---

[2016-11-21 21:24:15] Loaded plugin: homebridge-pi

[2016-11-21 21:24:15] Registering accessory 'homebridge-pi.PiTemperature'

[2016-11-21 21:24:15] ---

[2016-11-21 21:24:15] Loaded plugin: homebridge-server

[2016-11-21 21:24:15] Registering platform 'homebridge-server.Server'

[2016-11-21 21:24:15] ---

[2016-11-21 21:24:16] Loaded plugin: homebridge-tesla

[2016-11-21 21:24:16] Registering accessory 'homebridge-tesla.Tesla'

[2016-11-21 21:24:16] ---

[2016-11-21 21:24:16] Loaded config.json with 0 accessories and 1 platforms.

[2016-11-21 21:24:16] ---

[2016-11-21 21:24:16] Loading 1 platforms...

[2016-11-21 21:24:16] [KNX] Initializing KNX platform...

---

>>> knxd groupsocketlisten starting <<<

[2016-11-21 21:24:16] Loading 0 accessories...

Load homebridge-camera-ffmpeg.Camera-ffmpeg

Plugin - Configure Accessory: Arbeitszimmerlampe --> Added to restoredAccessories[]

Plugin - Configure Accessory: Arbeitszimmerrollo --> Added to restoredAccessories[]

Plugin - Configure Accessory: TestDevice --> Added to restoredAccessories[]

Plugin - Configure Accessory: Arbeitszimmerlampe --> Added to restoredAccessories[]

Plugin - Configure Accessory: Arbeitszimmerrollo --> Added to restoredAccessories[]

Plugin - Configure Accessory: TestDevice --> Added to restoredAccessories[]

Scan this code with your HomeKit App on your iOS device to pair with Homebridge:



    ┌────────────┐    

    │ 031-77-154 │    

    └────────────┘    



[2016-11-21 21:24:16] [KNX] homebridge event didFinishLaunching

[2016-11-21 21:24:16] [KNX] Configuration starts

[2016-11-21 21:24:16] [KNX] Reading from config: Device/Accessory 1 of 3

[2016-11-21 21:24:16] [KNX] Service constructor called

[2016-11-21 21:24:16] [KNX] ServiceType defined

[2016-11-21 21:24:16] [KNX] ServiceType known as function

[2016-11-21 21:24:16] [KNX] Found restored service: Bürolampe

[2016-11-21 21:24:16] [KNX] Preparing Characteristics: 1

[2016-11-21 21:24:16] [KNX] On

[2016-11-21 21:24:16] [KNX] Adding characteristic...

[2016-11-21 21:24:16] [KNX] CharacteristicKNX.Constructor

---iterating--------------------

Type: On

Set.0: 1/3/5

Listen.0: 1/3/5

================================

INFO registerSingleGA 1/3/5

[2016-11-21 21:24:16] [KNX] Done with [Arbeitszimmerlampe] accessory

[2016-11-21 21:24:16] [KNX] Reading from config: Device/Accessory 2 of 3

[2016-11-21 21:24:16] [KNX] Service constructor called

[2016-11-21 21:24:16] [KNX] ServiceType defined

[2016-11-21 21:24:16] [KNX] ServiceType known as function

[2016-11-21 21:24:16] [KNX] Found restored service: Büro-Rollo

[2016-11-21 21:24:16] [KNX] customServiceAPI.constructor(service, GiraJalousieActuator)

[2016-11-21 21:24:16] [KNX] HandlerPattern instatiated!

[2016-11-21 21:24:16] [KNX] Preparing Characteristics: 3

[2016-11-21 21:24:16] [KNX] TargetPosition

[2016-11-21 21:24:16] [KNX] Adding characteristic...

[2016-11-21 21:24:16] [KNX] CharacteristicKNX.Constructor

---iterating--------------------

Type: TargetPosition

Set.0: 2/3/46

DPT: DPT5

================================

[2016-11-21 21:24:16] [KNX] GiraJalousieActuator: Adding Characteristic TargetPosition

[2016-11-21 21:24:16] [KNX] CurrentPosition

[2016-11-21 21:24:16] [KNX] Adding characteristic...

[2016-11-21 21:24:16] [KNX] CharacteristicKNX.Constructor

---iterating--------------------

Type: CurrentPosition

Listen.0: 2/3/26

================================

INFO registerSingleGA 2/3/26

[2016-11-21 21:24:16] [KNX] GiraJalousieActuator: Adding Characteristic CurrentPosition

[2016-11-21 21:24:16] [KNX] PositionState

[2016-11-21 21:24:16] [KNX] Adding characteristic...

[2016-11-21 21:24:16] [KNX] CharacteristicKNX.Constructor

---iterating--------------------

Type: PositionState

================================

[2016-11-21 21:24:16] [KNX] GiraJalousieActuator: Adding Characteristic PositionState

[2016-11-21 21:24:16] [KNX] Preparing KNXObjects: 1

[2016-11-21 21:24:16] [KNX] GiraJalousieActuator: Adding PseudoCharacteristic ShutterMove

INFO registerSingleGA 2/3/6

[2016-11-21 21:24:16] [KNX] Done with [Arbeitszimmerrollo] accessory

[2016-11-21 21:24:16] [KNX] Reading from config: Device/Accessory 3 of 3

[2016-11-21 21:24:16] [KNX] Service constructor called

[2016-11-21 21:24:16] [KNX] ServiceType defined

[2016-11-21 21:24:16] [KNX] ServiceType known as function

[2016-11-21 21:24:16] [KNX] Found restored service: Türschloss

[2016-11-21 21:24:16] [KNX] customServiceAPI.constructor(service, DummyHandler)

[2016-11-21 21:24:16] [KNX] HandlerPattern instatiated!

[2016-11-21 21:24:16] [KNX] Preparing Characteristics: 2

[2016-11-21 21:24:16] [KNX] LockCurrentState

[2016-11-21 21:24:16] [KNX] Adding characteristic...

[2016-11-21 21:24:16] [KNX] CharacteristicKNX.Constructor

---iterating--------------------

Type: LockCurrentState

================================

[2016-11-21 21:24:16] [KNX] DummyHandler: Adding Characteristic LockCurrentState

[2016-11-21 21:24:16] [KNX] LockTargetState

[2016-11-21 21:24:16] [KNX] Adding characteristic...

[2016-11-21 21:24:16] [KNX] CharacteristicKNX.Constructor

---iterating--------------------

Type: LockTargetState

================================

[2016-11-21 21:24:16] [KNX] DummyHandler: Adding Characteristic LockTargetState

[2016-11-21 21:24:16] [KNX] Done with [TestDevice] accessory

[2016-11-21 21:24:16] [KNX] We have read 3 devices from file.

[2016-11-21 21:24:16] [KNX] Saving config file!

---

events.js:160

      throw er; // Unhandled 'error' event

      ^




Error: spawn cec-client ENOENT

    at exports._errnoException (util.js:1026:11)

    at Process.ChildProcess._handle.onexit (internal/child_process.js:193:32)

    at onErrorNT (internal/child_process.js:359:16)

    at _combinedTickCallback (internal/process/next_tick.js:74:11)

    at process._tickCallback (internal/process/next_tick.js:98:9)

    at Module.runMain (module.js:609:11)

    at run (bootstrap_node.js:382:7)

    at startup (bootstrap_node.js:137:9)

    at bootstrap_node.js:497:3