-
Zuletzt geändert von jeff25; 20.03.2017, 21:21. -
Hatte ja für zwei Probleme Logs geschickt, gleiche Ursache? Übrigens bei Multicast kommen auf die initialen Groupreads auch keine Daten. Scheint durchweg was nicht zu stimmen.Zitat von Smurf Beitrag anzeigen
Lasse Den Aufbau erstmal so, wenn Du was Neues zum Testen hast, was Abhilfe schaffen sollte, sag Bescheid.Kommentar
-
hi Smurf ,
leichte Änderung. Nun kommt immer "bitte Programmierknopf drücken....
hier das log mit der Anpassungszeile von dir:
Code:root@raspberrypi:~/knxd# gdb src/server/knxd GNU gdb (Raspbian 7.7.1+dfsg-5+rpi1) 7.7.1 Copyright (C) 2014 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "arm-linux-gnueabihf". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from src/server/knxd...done. (gdb) b src/libserver/router.cpp:377 Breakpoint 1 at 0x4d658: file router.cpp, line 377. (gdb) comm 1 Type commands for breakpoint(s) 1, one per line. End with a line saying just "end". >whe >c >end (gdb) r ../test Starting program: /root/knxd/src/server/knxd ../test [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/arm-linux-gnueabihf/libthread_db.so.1". Layer 4 [ 1:main 0.000] R state: initialized [ 1:main] I00000000: 0.14.2: /root/knxd/src/server/knxd ../test Layer 4 [ 1:main 0.000] R state: setting up Layer 0 [ 4:log/main 0.000] State setup Layer 3 [ 5:server/Server 0.000] registerLink: server Layer 0 [12:log/A.ft12cemi 0.000] State setup Layer 3 [10:A.ft12cemi/Conn 0.000] registerLink: A.ft12cemi [ 1:main] I00000055: Connected: cfg:A.ft12cemi. [ 1:main] I00000055: Connected: cfg:server. Layer 4 [ 1:main 0.000] R state: setup OK [ 1:main] W00000020: knxd should not run as root Layer 4 [ 1:main 0.000] R state: trigger going up Layer 0 [ 4:log/main 0.000] State start Layer 3 [10:A.ft12cemi/Conn 0.000] Start: cfg:A.ft12cemi Layer 5 [10:A.ft12cemi/Conn 0.000] Starting Layer 0 [12:log/A.ft12cemi 0.000] State start Layer 1 [13:A.ft12cemi/ft12ser 0.000] Open Layer 1 [13:A.ft12cemi/ft12ser 0.001] Opened Layer 0 [12:log/A.ft12cemi 0.001] send next Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x00055b2c in Filter::send_Next (this=this@entry=0xc29e0) at link.cpp:363 #2 0x000299bc in LogFilter::send_Next (this=0xc29e0) at log.cpp:88 #3 0x000555bc in Driver::send_Next (this=0xc2ae8) at link.cpp:347 #4 0x00018310 in FT12serial::start (this=0xc2be0) at ft12.cpp:149 #5 0x00028fc0 in start (this=0xc29e0) at ../../src/libserver/link.h:563 #6 LogFilter::start (this=0xc29e0) at log.cpp:47 #7 0x0005c7d0 in LinkConnect::start (this=0xc2890) at link.cpp:111 #8 0x0004c51c in Router::start_ (this=0xc1720) at router.cpp:337 #9 0x00028fc0 in start (this=0xc22a8) at ../../src/libserver/link.h:563 #10 LogFilter::start (this=0xc22a8) at log.cpp:47 #11 0x000163f8 in main (ac=<optimized out>, ag=<optimized out>) at knxd.cpp:399 Layer 6 [ 1:main 0.797] SN: OK Layer 0 [ 4:log/main 0.797] send next Layer 6 [ 2:main/L 0.797] SN: OK L Layer 2 [14:A.ft12cemi/ft12cemi 0.797] OpenL2 Layer 1 [13:A.ft12cemi/ft12ser 0.797] Send(008): F6 00 08 01 34 10 01 00 Layer 0 [13:A.ft12cemi/ft12ser 0.797] Send(015): 68 09 09 68 73 F6 00 08 01 3 4 10 01 00 B7 16 Layer 0 [13:A.ft12cemi/ft12ser 0.808] Read(001): E5 Layer 0 [12:log/A.ft12cemi 0.808] State started Layer 5 [10:A.ft12cemi/Conn 0.808] Started Layer 4 [10:A.ft12cemi/Conn 0.808] R state: started Layer 6 [ 1:main 0.808] SN: send_more set Layer 3 [ 5:server/Server 0.808] Start: cfg:server Layer 8 [ 5:server/Server 0.808] Open Layer 0 [ 5:server/Server 0.808] Open Layer 0 [ 5:server/Server 0.808] Openend Layer 8 [16:router/driver 0.808] OpenD Layer 8 [16:router/driver 0.808] OpenedD Layer 3 [15:router/ConnC 0.808] registerLink: router_15 Layer 3 [15:router/ConnC 0.808] Start: cfg:router Layer 5 [15:router/ConnC 0.808] Starting Layer 5 [15:router/ConnC 0.808] Started Layer 4 [15:router/ConnC 0.808] R state: started Layer 6 [ 1:main 0.808] SN: send_more set Layer 8 [ 5:server/Server 0.808] Opened Layer 5 [ 5:server/Server 0.808] Started Layer 4 [ 5:server/Server 0.808] R state: started Layer 6 [ 1:main 0.808] SN: send_more set Layer 4 [ 1:main 0.808] R state: going up triggered Layer 4 [ 1:main 0.808] R state: check start Layer 4 [ 1:main 0.808] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 3 down 0 Layer 0 [ 4:log/main 0.808] State started Layer 4 [ 1:main 0.808] R state: all drivers up Layer 4 [ 1:main 0.808] R state: up Layer 0 [13:A.ft12cemi/ft12ser 0.825] Read(008): 68 08 08 68 F3 F5 00 08 Layer 0 [13:A.ft12cemi/ft12ser 0.830] Read(006): 01 34 10 01 36 16 Layer 0 [13:A.ft12cemi/ft12ser 0.830] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 0.830] RecvEMI(007): F5 00 08 01 34 10 01 Layer 2 [14:A.ft12cemi/ft12cemi 0.830] unknown data Layer 0 [ 5:server/Server 21.343] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 14 00 80 Layer 0 [ 4:log/main 21.343] Recv L_Data system from 1.1.1 to 1.1.2 0 hops: 06 T_CONNECT_REQ Layer 0 [ 4:log/main 21.343] Send L_Data system from 1.1.1 to 1.1.2 0 hops: 05 T_CONNECT_REQ Layer 0 [12:log/A.ft12cemi 21.343] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 21.343] Has Addr 1.1.20: no Layer 1 [ 5:server/Server 21.343] Send(010): 29 00 B0 50 11 01 11 14 00 80 Layer 0 [12:log/A.ft12cemi 21.343] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 21.343] Addr Check 1.1.20: yes Layer 0 [12:log/A.ft12cemi 21.343] Send L_Data system from 1.1.1 to 1.1.2 0 hops: 05 T_CONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 21.343] Send(010): 11 00 B0 50 11 01 11 14 00 80 Layer 6 [15:router/ConnC 21.343] SN: still waiting Layer 6 [ 1:main 21.343] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 21.344] Send(017): 68 0B 0B 68 53 11 00 B0 50 11 01 11 14 00 80 1B 16 Layer 0 [ 5:server/Server 21.344] Send(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 14 00 80 Layer 0 [ 5:server/Server 21.344] Dropped(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 14 00 80 Layer 0 [ 5:server/Server 21.346] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 14 01 43 00 Layer 0 [ 4:log/main 21.346] Recv L_Data system from 1.1.1 to 1.1.2 0 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 6 [ 1:main 21.346] SN: wait L Layer 0 [ 5:server/Server 21.349] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 21.349] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 21.349] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 21.356] Read(001): E5 Layer 0 [12:log/A.ft12cemi 21.356] send next Layer 6 [15:router/ConnC 21.356] SN: still waiting Layer 0 [13:A.ft12cemi/ft12ser 21.447] Read(008): 68 0B 0B 68 D3 2E 00 91 Layer 0 [13:A.ft12cemi/ft12ser 21.452] Read(008): 50 11 01 11 14 00 80 99 Layer 0 [13:A.ft12cemi/ft12ser 21.454] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 21.454] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 21.454] RecvEMI(010): 2E 00 91 50 11 01 11 14 00 80 Layer 2 [14:A.ft12cemi/ft12cemi 21.454] Confirmed Layer 0 [12:log/A.ft12cemi 21.454] send next Layer 6 [15:router/ConnC 21.454] SN: still waiting Layer 0 [ 5:server/Server 24.148] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 24.149] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 24.149] SN: wait L Layer 0 [ 5:server/Server 27.154] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 27.155] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 27.155] SN: wait L Layer 0 [ 5:server/Server 30.152] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 30.152] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 30.152] SN: wait L Layer 0 [ 5:server/Server 33.393] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 33.393] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 33.393] SN: wait L Layer 0 [ 5:server/Server 36.239] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 36.240] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 36.240] SN: wait L Layer 0 [ 5:server/Server 39.190] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 39.190] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 39.190] SN: wait L Layer 0 [ 5:server/Server 42.171] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 42.171] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 42.171] SN: wait L Layer 0 [ 5:server/Server 45.174] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 45.174] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 45.174] SN: wait L
Kommentar
-
Ja, gleiches Problem, siehe die E000*-Fehlermeldungen die währenddessen kommen.Code:Übrigens bei Multicast kommen auf die initialen Groupreads auch keine Daten
jeff25 Ah. Ändere mal die Änderung von vorhin wie folgt:
und sag mir was das bringt.Code:diff --git a/src/libserver/link.h b/src/libserver/link.h index f5cf1a9..5205a91 100644 --- a/src/libserver/link.h +++ b/src/libserver/link.h @@ -399,6 +399,8 @@ public: bool send_more = true; virtual void send_L_Data (LDataPtr l) { + if (need_send_more) + send_more = false; LinkConnect_::send_L_Data(std::move(l));DistKV, Home Assistant, 1wire, KNX, Python, Asterisk, SMD-LötkolbenKommentar
-
Hi Smurf ,
ganz nah am Ziel :-). Es ist nun was interessantes passiert. Es kommt nun Programmieren, kurz darauf kommt Gerät antwortet nicht. Aber: Er schreibt die Adresse in das Gerät. Ich habe eine neue Physikalische Adresse eingetragen und die wird wohl geschrieben denn das Gerät taucht dann mit der neuen Adresse in "Geräte in Programmiermodus auf". Heisst irgendwie bekommt die ETS nicht mit das erfolgreich programmiert wurde. Daher denke ich deine letzte Anpassung war schon sehr gut. Das ging bis jetzt noch nie.
Code:root@raspberrypi:~/knxd# gdb src/server/knxd GNU gdb (Raspbian 7.7.1+dfsg-5+rpi1) 7.7.1 Copyright (C) 2014 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "arm-linux-gnueabihf". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from src/server/knxd...done. (gdb) b src/libserver/router.cpp:377 Breakpoint 1 at 0x4d658: file router.cpp, line 377. (gdb) comm 1 Type commands for breakpoint(s) 1, one per line. End with a line saying just "end". >whe >c >end (gdb) r ../test Starting program: /root/knxd/src/server/knxd ../test [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/arm-linux-gnueabihf/libthread_db.so.1". Layer 4 [ 1:main 0.000] R state: initialized [ 1:main] I00000000: 0.14.2: /root/knxd/src/server/knxd ../test Layer 4 [ 1:main 0.000] R state: setting up Layer 0 [ 4:log/main 0.000] State setup Layer 3 [ 5:server/Server 0.000] registerLink: server Layer 0 [12:log/A.ft12cemi 0.000] State setup Layer 3 [10:A.ft12cemi/Conn 0.000] registerLink: A.ft12cemi [ 1:main] I00000055: Connected: cfg:A.ft12cemi. [ 1:main] I00000055: Connected: cfg:server. Layer 4 [ 1:main 0.000] R state: setup OK [ 1:main] W00000020: knxd should not run as root Layer 4 [ 1:main 0.000] R state: trigger going up Layer 0 [ 4:log/main 0.000] State start Layer 3 [10:A.ft12cemi/Conn 0.000] Start: cfg:A.ft12cemi Layer 5 [10:A.ft12cemi/Conn 0.000] Starting Layer 0 [12:log/A.ft12cemi 0.000] State start Layer 1 [13:A.ft12cemi/ft12ser 0.000] Open Layer 1 [13:A.ft12cemi/ft12ser 0.001] Opened Layer 0 [12:log/A.ft12cemi 0.001] send next Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x00055afc in Filter::send_Next (this=this@entry=0xc29e0) at link.cpp:363 #2 0x000299bc in LogFilter::send_Next (this=0xc29e0) at log.cpp:88 #3 0x00055614 in Driver::send_Next (this=0xc2ae8) at link.cpp:347 #4 0x00018310 in FT12serial::start (this=0xc2be0) at ft12.cpp:149 #5 0x00028fc0 in start (this=0xc29e0) at ../../src/libserver/link.h:565 #6 LogFilter::start (this=0xc29e0) at log.cpp:47 #7 0x0005c788 in LinkConnect::start (this=0xc2890) at link.cpp:111 #8 0x0004c51c in Router::start_ (this=0xc1720) at router.cpp:337 #9 0x00028fc0 in start (this=0xc22a8) at ../../src/libserver/link.h:565 #10 LogFilter::start (this=0xc22a8) at log.cpp:47 #11 0x000163f8 in main (ac=<optimized out>, ag=<optimized out>) at knxd.cpp:399 Layer 6 [ 1:main 0.798] SN: OK Layer 0 [ 4:log/main 0.798] send next Layer 6 [ 2:main/L 0.798] SN: OK L Layer 2 [14:A.ft12cemi/ft12cemi 0.798] OpenL2 Layer 1 [13:A.ft12cemi/ft12ser 0.798] Send(008): F6 00 08 01 34 10 01 00 Layer 0 [13:A.ft12cemi/ft12ser 0.798] Send(015): 68 09 09 68 73 F6 00 08 01 34 10 01 00 B7 16 Layer 0 [13:A.ft12cemi/ft12ser 0.809] Read(001): E5 Layer 0 [12:log/A.ft12cemi 0.809] State started Layer 5 [10:A.ft12cemi/Conn 0.809] Started Layer 4 [10:A.ft12cemi/Conn 0.809] R state: started Layer 6 [ 1:main 0.809] SN: send_more set Layer 3 [ 5:server/Server 0.809] Start: cfg:server Layer 8 [ 5:server/Server 0.809] Open Layer 0 [ 5:server/Server 0.809] Open Layer 0 [ 5:server/Server 0.809] Openend Layer 8 [16:router/driver 0.809] OpenD Layer 8 [16:router/driver 0.810] OpenedD Layer 3 [15:router/ConnC 0.810] registerLink: router_15 Layer 3 [15:router/ConnC 0.810] Start: cfg:router Layer 5 [15:router/ConnC 0.810] Starting Layer 5 [15:router/ConnC 0.810] Started Layer 4 [15:router/ConnC 0.810] R state: started Layer 6 [ 1:main 0.810] SN: send_more set Layer 8 [ 5:server/Server 0.810] Opened Layer 5 [ 5:server/Server 0.810] Started Layer 4 [ 5:server/Server 0.810] R state: started Layer 6 [ 1:main 0.810] SN: send_more set Layer 4 [ 1:main 0.810] R state: going up triggered Layer 4 [ 1:main 0.810] R state: check start Layer 4 [ 1:main 0.810] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 3 down 0 Layer 0 [ 4:log/main 0.810] State started Layer 4 [ 1:main 0.810] R state: all drivers up Layer 4 [ 1:main 0.810] R state: up Layer 0 [13:A.ft12cemi/ft12ser 0.829] Read(008): 68 08 08 68 D3 F5 00 08 Layer 0 [13:A.ft12cemi/ft12ser 0.834] Read(006): 01 34 10 01 16 16 Layer 0 [13:A.ft12cemi/ft12ser 0.834] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 0.834] Sequence jump Layer 0 [ 5:server/Server 10.114] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 04 00 80 Layer 0 [ 4:log/main 10.114] Recv L_Data system from 1.1.1 to 1.1.4 hops: 06 T_CONNECT_REQ Layer 0 [ 4:log/main 10.114] Send L_Data system from 1.1.1 to 1.1.4 hops: 05 T_CONNECT_REQ Layer 0 [12:log/A.ft12cemi 10.114] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 10.114] Has Addr 1.1.4: no Layer 1 [ 5:server/Server 10.114] Send(010): 29 00 B0 50 11 01 11 04 00 80 Layer 0 [12:log/A.ft12cemi 10.114] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 10.114] Addr Check 1.1.4: yes Layer 0 [12:log/A.ft12cemi 10.114] Send L_Data system from 1.1.1 to 1.1.4 hops: 05 T_CONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 10.114] Send(010): 11 00 B0 50 11 01 11 04 00 80 Layer 6 [10:A.ft12cemi/Conn 10.114] SN: still waiting Layer 6 [ 1:main 10.114] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 10.114] Send(017): 68 0B 0B 68 53 11 00 B0 50 11 01 11 04 00 80 0B 16 Layer 0 [ 5:server/Server 10.115] Send(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 04 00 80 Layer 0 [ 5:server/Server 10.115] Dropped(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 04 00 80 Layer 0 [13:A.ft12cemi/ft12ser 10.127] Read(001): E5 Layer 0 [12:log/A.ft12cemi 10.127] send next Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x00055afc in Filter::send_Next (this=this@entry=0xc29e0) at link.cpp:363 #2 0x000299bc in LogFilter::send_Next (this=0xc29e0) at log.cpp:88 #3 0x00055614 in Driver::send_Next (this=0xc2ae8) at link.cpp:347 ---Type <return> to continue, or q <return> to quit--- #4 0x00018460 in FT12serial::process_read (this=this@entry=0xc2be0, is_timeout=is_timeout@entry=false) at ft12.cpp:294 #5 0x00018cc8 in FT12serial::read_cb (this=0xc2be0, buf=<optimized out>, len=1) at ft12.cpp:273 #6 0x0008cc94 in operator() (len=<optimized out>, buf=0xc2cec "\345\064\020\001\026\026", this=0xc2cdc) at callbacks.h:87 #7 RecvBuf::feed_out (this=0xc2ca8) at iobuf.cpp:105 #8 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #9 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #10 0x00000000 in ?? () Layer 6 [ 1:main 26.422] SN: OK Layer 0 [ 4:log/main 26.422] send next Layer 6 [ 2:main/L 26.422] SN: OK L Layer 1 [14:A.ft12cemi/ft12cemi 26.422] No confirm, continuing Layer 0 [12:log/A.ft12cemi 26.422] send next Layer 6 [ 1:main 26.422] SN: send_more set Layer 0 [13:A.ft12cemi/ft12ser 26.422] Read(068): 68 0B 0B 68 F3 2E 00 B0 50 11 01 11 04 00 80 C8 16 68 0B 0B 68 F3 2E 00 B0 50 11 01 11 04 00 80 C8 16 68 0B 0B 68 F3 2E 00 B0 50 11 01 11 04 00 80 C8 16 68 0B 0B 68 F3 2E 00 B0 50 11 01 11 04 00 80 C8 16 Layer 0 [13:A.ft12cemi/ft12ser 26.422] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 26.422] Sequence jump Layer 0 [ 5:server/Server 26.422] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 04 01 43 00 Layer 0 [ 4:log/main 26.422] Recv L_Data system from 1.1.1 to 1.1.4 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 26.422] Send L_Data system from 1.1.1 to 1.1.4 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 26.422] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 26.422] Has Addr 1.1.4: no Layer 1 [ 5:server/Server 26.422] Send(011): 29 00 B0 50 11 01 11 04 01 43 00 Layer 0 [12:log/A.ft12cemi 26.422] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 26.422] Addr Check 1.1.4: yes Layer 0 [12:log/A.ft12cemi 26.422] Send L_Data system from 1.1.1 to 1.1.4 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 26.422] Send(011): 11 00 B0 50 11 01 11 04 01 43 00 Layer 6 [10:A.ft12cemi/Conn 26.422] SN: still waiting Layer 6 [ 1:main 26.422] SN: wait L Layer 0 [ 5:server/Server 26.422] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 26.422] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 26.422] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 26.422] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 04 01 43 00 EF 16 Layer 0 [ 5:server/Server 26.422] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 26.422] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 0 [ 5:server/Server 26.422] Send(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 04 01 43 00 Layer 6 [ 1:main 26.423] SN: wait L Layer 0 [ 5:server/Server 26.423] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 26.423] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 26.423] SN: wait L Layer 0 [ 5:server/Server 26.423] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 26.423] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 26.423] SN: wait L Layer 0 [ 5:server/Server 26.423] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 26.423] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 26.423] SN: wait L Layer 0 [ 5:server/Server 26.423] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 26.423] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 26.423] SN: wait L Layer 0 [ 5:server/Server 26.423] Dropped(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 04 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 26.435] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 26.479] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 26.484] Read(008): 50 11 01 11 04 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 26.487] Read(002): 6C 16 Layer 0 [13:A.ft12cemi/ft12ser 26.542] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 26.547] Read(008): 50 11 01 11 04 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 26.550] Read(002): 6C 16 Layer 0 [13:A.ft12cemi/ft12ser 26.605] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 26.610] Read(008): 50 11 01 11 04 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 26.613] Read(002): 6C 16 Layer 0 [13:A.ft12cemi/ft12ser 26.668] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 26.673] Read(008): 50 11 01 11 04 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 26.676] Read(002): 6C 16 Layer 1 [14:A.ft12cemi/ft12cemi 26.722] No confirm, continuing Layer 0 [12:log/A.ft12cemi 26.722] send next Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x00055afc in Filter::send_Next (this=this@entry=0xc29e0) at link.cpp:363 #2 0x000299bc in LogFilter::send_Next (this=0xc29e0) at log.cpp:88 #3 0x00055614 in Driver::send_Next (this=0xc2ae8) at link.cpp:347 #4 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #5 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #6 0x00000000 in ?? () Layer 6 [ 1:main 26.733] SN: OK Layer 0 [ 4:log/main 26.733] send next Layer 6 [ 2:main/L 26.733] SN: OK L Layer 0 [ 4:log/main 26.733] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [ 5:server/Server 26.733] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [12:log/A.ft12cemi 26.733] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 26.733] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 26.733] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read [13:A.ft12cemi] E00000036: Send while data Layer 6 [10:A.ft12cemi/Conn 26.733] SN: still waiting Layer 6 [ 1:main 26.733] SN: wait L Layer 0 [ 5:server/Server 26.733] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [ 5:server/Server 26.733] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 26.826] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 26.826] RecvEMI(010): 2E 00 B0 50 11 01 11 04 00 80 Layer 2 [14:A.ft12cemi/ft12cemi 26.826] Confirmed Layer 0 [12:log/A.ft12cemi 26.826] send next ---Type <return> to continue, or q <return> to quit--- Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x00055afc in Filter::send_Next (this=this@entry=0xc29e0) at link.cpp:363 #2 0x000299bc in LogFilter::send_Next (this=0xc29e0) at log.cpp:88 #3 0x00055614 in Driver::send_Next (this=0xc2ae8) at link.cpp:347 #4 0x0003fef8 in EMI_Common::recv_Data (this=0xc3508, c=...) at emi_common.cpp:158 #5 0x00018a78 in FT12serial::process_read (this=0xc2be0, is_timeout=<optimized out>) at ft12.cpp:367 #6 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #7 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #8 0x00000000 in ?? () Layer 6 [ 1:main 27.872] SN: OK Layer 0 [ 4:log/main 27.872] send next Layer 6 [ 2:main/L 27.872] SN: OK L Layer 0 [12:log/A.ft12cemi 27.872] send next Layer 6 [ 1:main 27.872] SN: send_more set Layer 0 [13:A.ft12cemi/ft12ser 27.872] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 27.872] RecvEMI(011): 2E 00 B0 50 11 01 11 04 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 27.873] spurious Confirm Layer 0 [13:A.ft12cemi/ft12ser 27.873] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 27.873] Wrong Sequence Layer 0 [ 4:log/main 27.873] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [ 5:server/Server 27.873] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [12:log/A.ft12cemi 27.873] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 27.873] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 27.873] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [13:A.ft12cemi/ft12ser 27.873] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00 Layer 6 [10:A.ft12cemi/Conn 27.873] SN: still waiting Layer 6 [ 1:main 27.873] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 27.873] Send(018): 68 0C 0C 68 53 11 00 B0 D0 11 01 00 00 01 01 00 F8 16 Layer 0 [ 5:server/Server 27.873] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [ 5:server/Server 27.873] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 27.886] Read(001): E5 Layer 0 [12:log/A.ft12cemi 27.886] send next Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x00055afc in Filter::send_Next (this=this@entry=0xc29e0) at link.cpp:363 #2 0x000299bc in LogFilter::send_Next (this=0xc29e0) at log.cpp:88 #3 0x00055614 in Driver::send_Next (this=0xc2ae8) at link.cpp:347 #4 0x00018460 in FT12serial::process_read (this=this@entry=0xc2be0, is_timeout=is_timeout@entry=false) at ft12.cpp:294 ---Type <return> to continue, or q <return> to quit--- #5 0x00018cc8 in FT12serial::read_cb (this=0xc2be0, buf=<optimized out>, len=1) at ft12.cpp:273 #6 0x0008cc94 in operator() (len=<optimized out>, buf=0xc2cec "\345\026\001\021\004\001C", this=0xc2cdc) at callbacks.h:87 #7 RecvBuf::feed_out (this=0xc2ca8) at iobuf.cpp:105 #8 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #9 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #10 0x00000000 in ?? () Layer 6 [ 1:main 28.494] SN: OK Layer 0 [ 4:log/main 28.494] send next Layer 6 [ 2:main/L 28.494] SN: OK L Layer 0 [ 4:log/main 28.494] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [ 5:server/Server 28.494] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [12:log/A.ft12cemi 28.494] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 28.494] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 28.494] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read [14:A.ft12cemi] E00000000: EMI_common: send while waiting Layer 1 [13:A.ft12cemi/ft12ser 28.494] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00 Layer 6 [10:A.ft12cemi/Conn 28.494] SN: still waiting Layer 6 [ 1:main 28.494] SN: wait L Layer 1 [14:A.ft12cemi/ft12cemi 28.494] No confirm, continuing Layer 0 [12:log/A.ft12cemi 28.494] send next Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x00055afc in Filter::send_Next (this=this@entry=0xc29e0) at link.cpp:363 #2 0x000299bc in LogFilter::send_Next (this=0xc29e0) at log.cpp:88 #3 0x00055614 in Driver::send_Next (this=0xc2ae8) at link.cpp:347 #4 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #5 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #6 0x00000000 in ?? () Layer 6 [ 1:main 28.505] SN: OK Layer 0 [ 4:log/main 28.505] send next Layer 6 [ 2:main/L 28.505] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 28.505] Read(144): 68 0C 0C 68 F3 2E 00 B0 D0 11 01 00 00 01 01 00 B5 16 68 0C 0C 68 F3 2E 00 B0 D0 11 01 00 00 01 01 00 B5 16 68 0C 0C 68 F3 2E 00 B0 D0 11 01 00 00 01 01 00 B5 16 68 0C 0C 68 F3 2E 00 B0 D0 11 01 00 00 01 01 00 B5 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 Layer 0 [13:A.ft12cemi/ft12ser 28.505] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 28.505] RecvEMI(011): 2E 00 B0 D0 11 01 00 00 01 01 00 Layer 2 [14:A.ft12cemi/ft12cemi 28.505] spurious Confirm Layer 0 [ 5:server/Server 28.505] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 28.506] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 0 [ 4:log/main 28.506] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [ 5:server/Server 28.506] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [12:log/A.ft12cemi 28.506] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 28.506] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 28.506] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read [13:A.ft12cemi] E00000036: Send while data Layer 6 [10:A.ft12cemi/Conn 28.506] SN: still waiting Layer 6 [ 1:main 28.506] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 28.506] Send(018): 68 0C 0C 68 73 11 00 B0 D0 11 01 00 00 01 01 00 18 16 Layer 0 [ 5:server/Server 28.506] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [ 5:server/Server 28.506] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [ 5:server/Server 28.506] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [ 5:server/Server 28.506] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 28.519] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 28.559] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 28.564] Read(008): D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 28.567] Read(002): B5 16 Layer 0 [13:A.ft12cemi/ft12ser 28.622] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 28.627] Read(008): D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 28.630] Read(002): B5 16 Layer 0 [13:A.ft12cemi/ft12ser 28.685] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 28.690] Read(008): D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 28.693] Read(002): B5 16 Layer 0 [13:A.ft12cemi/ft12ser 28.748] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 28.753] Read(008): D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 28.756] Read(002): B5 16 Layer 1 [14:A.ft12cemi/ft12cemi 28.806] No confirm, continuing Layer 0 [12:log/A.ft12cemi 28.806] send next Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); ---Type <return> to continue, or q <return> to quit--- #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x00055afc in Filter::send_Next (this=this@entry=0xc29e0) at link.cpp:363 #2 0x000299bc in LogFilter::send_Next (this=0xc29e0) at log.cpp:88 #3 0x00055614 in Driver::send_Next (this=0xc2ae8) at link.cpp:347 #4 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #5 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #6 0x00000000 in ?? () Layer 6 [ 1:main 29.567] SN: OK Layer 0 [ 4:log/main 29.567] send next Layer 6 [ 2:main/L 29.567] SN: OK L Layer 0 [ 4:log/main 29.567] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [ 5:server/Server 29.567] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [12:log/A.ft12cemi 29.567] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 29.567] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 29.567] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read [13:A.ft12cemi] E00000036: Send while data Layer 6 [10:A.ft12cemi/Conn 29.567] SN: still waiting Layer 6 [ 1:main 29.567] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 29.567] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 29.567] Wrong Sequence Layer 0 [13:A.ft12cemi/ft12ser 29.567] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 29.567] RecvEMI(011): 29 00 B0 E0 11 04 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 29.567] Recv L_Data system from 1.1.4 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [12:log/A.ft12cemi 29.567] Has Addr 1.1.4: no Layer 8 [ 1:main 29.567] unknown addr 1.1.4 Layer 0 [12:log/A.ft12cemi 29.567] Add Addr 1.1.4 Layer 0 [ 4:log/main 29.567] Recv L_Data system from 1.1.4 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [13:A.ft12cemi/ft12ser 29.567] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 29.567] Wrong Sequence Layer 0 [12:log/A.ft12cemi 29.567] send next Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x00055afc in Filter::send_Next (this=this@entry=0xc29e0) at link.cpp:363 #2 0x000299bc in LogFilter::send_Next (this=0xc29e0) at log.cpp:88 #3 0x00055614 in Driver::send_Next (this=0xc2ae8) at link.cpp:347 #4 0x00018460 in FT12serial::process_read (this=0xc2be0, is_timeout=<optimized out>) at ft12.cpp:294 #5 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #6 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #7 0x00000000 in ?? () Layer 6 [ 1:main 29.580] SN: OK Layer 0 [ 4:log/main 29.580] send next Layer 6 [ 2:main/L 29.580] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 29.580] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 29.580] RecvEMI(011): 2E 00 B0 D0 11 01 00 00 01 01 00 Layer 2 [14:A.ft12cemi/ft12cemi 29.580] Confirmed Layer 0 [12:log/A.ft12cemi 29.580] send next Layer 6 [ 1:main 29.580] SN: send_more set Layer 0 [13:A.ft12cemi/ft12ser 29.580] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 29.580] Wrong Sequence Layer 0 [13:A.ft12cemi/ft12ser 29.580] Read(072): 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 Layer 0 [13:A.ft12cemi/ft12ser 29.580] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 29.580] RecvEMI(011): 29 00 B0 E0 11 04 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 29.580] Recv L_Data system from 1.1.4 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [12:log/A.ft12cemi 29.580] Has Addr 1.1.4: yes Layer 8 [10:A.ft12cemi/Conn 29.580] found addr 1.1.4 Layer 0 [ 4:log/main 29.580] Recv L_Data system from 1.1.4 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [ 4:log/main 29.580] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [ 5:server/Server 29.580] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [12:log/A.ft12cemi 29.580] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 29.580] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 29.580] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [13:A.ft12cemi/ft12ser 29.580] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00 Layer 6 [10:A.ft12cemi/Conn 29.580] SN: still waiting Layer 6 [ 1:main 29.580] SN: wait L Layer 0 [ 5:server/Server 29.580] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 29.580] Send(018): 68 0C 0C 68 53 11 00 B0 D0 11 01 00 00 01 01 00 F8 16 Layer 0 [ 5:server/Server 29.580] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [ 5:server/Server 29.580] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [ 5:server/Server 29.580] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 29.594] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 29.638] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 29.643] Read(008): D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 29.646] Read(002): B5 16 Layer 0 [13:A.ft12cemi/ft12ser 29.701] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 29.706] Read(008): D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 29.709] Read(002): B5 16 Layer 0 [13:A.ft12cemi/ft12ser 29.764] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 29.769] Read(008): D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 29.772] Read(002): B5 16 Layer 0 [13:A.ft12cemi/ft12ser 29.827] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 29.832] Read(008): D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 29.835] Read(002): B5 16 Layer 1 [14:A.ft12cemi/ft12cemi 29.880] No confirm, continuing Layer 0 [12:log/A.ft12cemi 29.880] send next Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 ---Type <return> to continue, or q <return> to quit--- 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x00055afc in Filter::send_Next (this=this@entry=0xc29e0) at link.cpp:363 #2 0x000299bc in LogFilter::send_Next (this=0xc29e0) at log.cpp:88 #3 0x00055614 in Driver::send_Next (this=0xc2ae8) at link.cpp:347 #4 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #5 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #6 0x00000000 in ?? () Layer 6 [ 1:main 30.377] SN: OK Layer 0 [ 4:log/main 30.377] send next Layer 6 [ 2:main/L 30.377] SN: OK L Layer 0 [ 4:log/main 30.377] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [ 5:server/Server 30.377] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [12:log/A.ft12cemi 30.377] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 30.377] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 30.377] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read [13:A.ft12cemi] E00000036: Send while data Layer 6 [10:A.ft12cemi/Conn 30.377] SN: still waiting Layer 6 [ 1:main 30.377] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 30.377] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 30.377] Wrong Sequence Layer 0 [12:log/A.ft12cemi 30.377] send next Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x00055afc in Filter::send_Next (this=this@entry=0xc29e0) at link.cpp:363 #2 0x000299bc in LogFilter::send_Next (this=0xc29e0) at log.cpp:88 #3 0x00055614 in Driver::send_Next (this=0xc2ae8) at link.cpp:347 #4 0x00018460 in FT12serial::process_read (this=0xc2be0, is_timeout=<optimized out>) at ft12.cpp:294 #5 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #6 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #7 0x00000000 in ?? () Layer 6 [ 1:main 30.398] SN: OK Layer 0 [ 4:log/main 30.398] send next Layer 6 [ 2:main/L 30.398] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 30.398] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 30.398] RecvEMI(011): 2E 00 B0 D0 11 01 00 00 01 01 00 Layer 2 [14:A.ft12cemi/ft12cemi 30.398] Confirmed Layer 0 [12:log/A.ft12cemi 30.398] send next Layer 6 [ 1:main 30.398] SN: send_more set Layer 0 [13:A.ft12cemi/ft12ser 30.398] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 30.398] Wrong Sequence Layer 0 [13:A.ft12cemi/ft12ser 30.398] Read(072): 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 Layer 0 [13:A.ft12cemi/ft12ser 30.398] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 30.398] RecvEMI(011): 29 00 B0 E0 11 04 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 30.398] Recv L_Data system from 1.1.4 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [12:log/A.ft12cemi 30.398] Has Addr 1.1.4: yes Layer 8 [10:A.ft12cemi/Conn 30.398] found addr 1.1.4 Layer 0 [ 4:log/main 30.399] Recv L_Data system from 1.1.4 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [ 4:log/main 30.399] Send L_Data system from 1.1.4 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 1 [ 5:server/Server 30.399] Send(011): 29 00 B0 D0 11 04 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 30.399] Has Addr 1.1.4: yes ---Type <return> to continue, or q <return> to quit--- Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x0004dca0 in Router::send_L_Data (this= 0x305e4 <Server::send_L_Data(std::unique_ptr<L_Data_PDU, std::default_delete<L_Data_PDU> >)>, l1=std::unique_ptr<L_Data_PDU> containing 0xc8b28) at router.cpp:945 #2 0x0005221c in RouterHigh::send_L_Data (this=<optimized out>, l=...) at router.h:256 #3 0x00028d10 in send_L_Data (l=..., this=0xc22a8) at ../../src/libserver/link.h:533 #4 LogFilter::send_L_Data (this=0xc22a8, l=std::unique_ptr<L_Data_PDU> containing 0x0) at log.cpp:96 #5 0x000515a8 in LinkConnect_::send_L_Data (this=<optimized out>, l=...) at link.h:349 #6 0x0004efd4 in Router::trigger_cb (this=0xc1720, w=..., revents=<optimized out>) at router.cpp:882 #7 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #8 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #9 0x00000000 in ?? () Layer 6 [ 1:main 31.628] SN: OK Layer 0 [ 4:log/main 31.628] send next Layer 6 [ 2:main/L 31.628] SN: OK L Layer 0 [ 4:log/main 31.628] Send L_Data system from 1.1.4 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 1 [ 5:server/Server 31.628] Send(011): 29 00 B0 D0 11 04 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 31.628] Has Addr 1.1.4: yes Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 ---Type <return> to continue, or q <return> to quit--- 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x0004dca0 in Router::send_L_Data ( this=0x305e4 <Server::send_L_Data(std::unique_ptr<L_Data_PDU, std::default_delete<L_Data_PDU> >)>, l1=std::unique_ptr<L_Data_PDU> containing 0xc8b00) at router.cpp:945 #2 0x0005221c in RouterHigh::send_L_Data (this=<optimized out>, l=...) at router.h:256 #3 0x00028d10 in send_L_Data (l=..., this=0xc22a8) at ../../src/libserver/link.h:533 #4 LogFilter::send_L_Data (this=0xc22a8, l=std::unique_ptr<L_Data_PDU> containing 0x0) at log.cpp:96 #5 0x000515a8 in LinkConnect_::send_L_Data (this=<optimized out>, l=...) at link.h:349 #6 0x0004efd4 in Router::trigger_cb (this=0xc1720, w=..., revents=<optimized out>) at router.cpp:882 #7 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #8 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #9 0x00000000 in ?? () Layer 6 [ 1:main 32.084] SN: OK Layer 0 [ 4:log/main 32.084] send next Layer 6 [ 2:main/L 32.084] SN: OK L Layer 0 [ 4:log/main 32.084] Send L_Data system from 1.1.4 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 1 [ 5:server/Server 32.084] Send(011): 29 00 B0 D0 11 04 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 32.084] Has Addr 1.1.4: yes Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); ---Type <return> to continue, or q <return> to quit--- #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x0004dca0 in Router::send_L_Data ( this=0x305e4 <Server::send_L_Data(std::unique_ptr<L_Data_PDU, std::default_delete<L_Data_PDU> >)>, l1=std::unique_ptr<L_Data_PDU> containing 0xc8ab8) at router.cpp:945 #2 0x0005221c in RouterHigh::send_L_Data (this=<optimized out>, l=...) at router.h:256 #3 0x00028d10 in send_L_Data (l=..., this=0xc22a8) at ../../src/libserver/link.h:533 #4 LogFilter::send_L_Data (this=0xc22a8, l=std::unique_ptr<L_Data_PDU> containing 0x0) at log.cpp:96 #5 0x000515a8 in LinkConnect_::send_L_Data (this=<optimized out>, l=...) at link.h:349 #6 0x0004efd4 in Router::trigger_cb (this=0xc1720, w=..., revents=<optimized out>) at router.cpp:882 #7 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #8 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #9 0x00000000 in ?? () Layer 6 [ 1:main 32.756] SN: OK Layer 0 [ 4:log/main 32.756] send next Layer 6 [ 2:main/L 32.756] SN: OK L Layer 0 [ 5:server/Server 32.756] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 32.756] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 32.756] Wrong Sequence Layer 0 [ 5:server/Server 32.756] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 32.756] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 0 [ 5:server/Server 32.756] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 04 00 00 01 01 40 Layer 0 [ 4:log/main 32.756] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [ 5:server/Server 32.756] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [12:log/A.ft12cemi 32.756] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 32.756] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 32.756] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [13:A.ft12cemi/ft12ser 32.756] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00 Layer 6 [10:A.ft12cemi/Conn 32.756] SN: still waiting Layer 6 [ 1:main 32.756] SN: wait L Layer 0 [ 5:server/Server 32.756] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [ 5:server/Server 32.756] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 04 00 00 01 01 40 Layer 0 [13:A.ft12cemi/ft12ser 32.756] Send(018): 68 0C 0C 68 73 11 00 B0 D0 11 01 00 00 01 01 00 18 16 Layer 0 [ 5:server/Server 32.756] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 04 00 00 01 01 40 Layer 0 [ 5:server/Server 32.756] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 04 00 00 01 01 40 Layer 0 [ 5:server/Server 32.756] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 04 00 00 01 01 40 Layer 0 [ 5:server/Server 32.756] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [ 5:server/Server 32.757] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 04 00 00 01 01 40 Layer 0 [ 5:server/Server 32.757] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 32.769] Read(001): E5 Layer 0 [12:log/A.ft12cemi 32.769] send next Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 ---Type <return> to continue, or q <return> to quit--- #1 0x00055afc in Filter::send_Next (this=this@entry=0xc29e0) at link.cpp:363 #2 0x000299bc in LogFilter::send_Next (this=0xc29e0) at log.cpp:88 #3 0x00055614 in Driver::send_Next (this=0xc2ae8) at link.cpp:347 #4 0x00018460 in FT12serial::process_read (this=this@entry=0xc2be0, is_timeout=is_timeout@entry=false) at ft12.cpp:294 #5 0x00018cc8 in FT12serial::read_cb (this=0xc2be0, buf=<optimized out>, len=1) at ft12.cpp:273 #6 0x0008cc94 in operator() (len=<optimized out>, buf=0xc2cec "\345\f\fh\323)", this=0xc2cdc) at callbacks.h:87 #7 RecvBuf::feed_out (this=0xc2ca8) at iobuf.cpp:105 #8 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #9 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #10 0x00000000 in ?? () Layer 6 [ 1:main 33.449] SN: OK Layer 0 [ 4:log/main 33.449] send next Layer 6 [ 2:main/L 33.449] SN: OK L Layer 1 [14:A.ft12cemi/ft12cemi 33.449] No confirm, continuing Layer 0 [12:log/A.ft12cemi 33.449] send next Layer 6 [ 1:main 33.449] SN: send_more set Layer 0 [13:A.ft12cemi/ft12ser 33.449] Read(144): 68 0C 0C 68 F3 2E 00 B0 D0 11 01 00 00 01 01 00 B5 16 68 0C 0C 68 F3 2E 00 B0 D0 11 01 00 00 01 01 00 B5 16 68 0C 0C 68 F3 2E 00 B0 D0 11 01 00 00 01 01 00 B5 16 68 0C 0C 68 F3 2E 00 B0 D0 11 01 00 00 01 01 00 B5 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 68 0C 0C 68 D3 29 00 B0 E0 11 04 00 00 01 01 40 E3 16 Layer 0 [13:A.ft12cemi/ft12ser 33.450] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 33.450] RecvEMI(011): 2E 00 B0 D0 11 01 00 00 01 01 00 Layer 2 [14:A.ft12cemi/ft12cemi 33.450] spurious Confirm Layer 0 [13:A.ft12cemi/ft12ser 33.600] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 33.600] Wrong Sequence Layer 0 [13:A.ft12cemi/ft12ser 33.600] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 33.600] RecvEMI(011): 29 00 B0 E0 11 04 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 33.600] Recv L_Data system from 1.1.4 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [12:log/A.ft12cemi 33.600] Has Addr 1.1.4: yes Layer 8 [10:A.ft12cemi/Conn 33.600] found addr 1.1.4 Layer 0 [ 4:log/main 33.600] Recv L_Data system from 1.1.4 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [13:A.ft12cemi/ft12ser 33.600] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 33.600] Wrong Sequence Layer 0 [ 4:log/main 33.600] Send L_Data system from 1.1.4 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 1 [ 5:server/Server 33.600] Send(011): 29 00 B0 D0 11 04 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 33.600] Has Addr 1.1.4: yes Breakpoint 1, Router::send_Next (this=0xc1720) at router.cpp:377 377 TRACEPRINTF (t, 6, "SN: OK"); #0 Router::send_Next (this=0xc1720) at router.cpp:377 #1 0x0004dca0 in Router::send_L_Data ( this=0x305e4 <Server::send_L_Data(std::unique_ptr<L_Data_PDU, std::default_delete<L_Data_PDU> >)>, l1=std::unique_ptr<L_Data_PDU> containing 0xc8b60) at router.cpp:945 #2 0x0005221c in RouterHigh::send_L_Data (this=<optimized out>, l=...) ---Type <return> to continue, or q <return> to quit--- at router.h:256 #3 0x00028d10 in send_L_Data (l=..., this=0xc22a8) at ../../src/libserver/link.h:533 #4 LogFilter::send_L_Data (this=0xc22a8, l=std::unique_ptr<L_Data_PDU> containing 0x0) at log.cpp:96 #5 0x000515a8 in LinkConnect_::send_L_Data (this=<optimized out>, l=...) at link.h:349 #6 0x0004efd4 in Router::trigger_cb (this=0xc1720, w=..., revents=<optimized out>) at router.cpp:882 #7 0x76f5dc88 in ev_invoke_pending () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #8 0x76f60ba8 in ev_run () from /usr/lib/arm-linux-gnueabihf/libev.so.4 #9 0x00000000 in ?? () Layer 6 [ 1:main 34.214] SN: OK Layer 0 [ 4:log/main 34.214] send next Layer 6 [ 2:main/L 34.214] SN: OK L Layer 0 [ 5:server/Server 34.214] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 04 00 00 01 01 40 Layer 0 [ 5:server/Server 34.214] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 04 00 00 01 01 40Kommentar
-
Fein. Den gdb-Terz kannst du somit wieder weglassen. Schick mir mal was "ohne" passiert.DistKV, Home Assistant, 1wire, KNX, Python, Asterisk, SMD-LötkolbenKommentar
-
Das ist wieder bis zu dem Moment wo Gerät Antwortet nicht kommt, davor steht programmieren. Die neue Adresse 1.1.6 wurde wieder geschrieben....
Code:root@raspberrypi:~/knxd# knxd ../test Layer 4 [ 1:main 0.000] R state: initialized [ 1:main] I00000000: 0.14.2: knxd ../test Layer 4 [ 1:main 0.000] R state: setting up Layer 0 [ 4:log/main 0.000] State setup Layer 3 [ 5:server/Server 0.000] registerLink: server Layer 0 [12:log/A.ft12cemi 0.001] State setup Layer 3 [10:A.ft12cemi/Conn 0.001] registerLink: A.ft12cemi [ 1:main] I00000055: Connected: cfg:A.ft12cemi. [ 1:main] I00000055: Connected: cfg:server. Layer 4 [ 1:main 0.001] R state: setup OK [ 1:main] W00000020: knxd should not run as root Layer 4 [ 1:main 0.001] R state: trigger going up Layer 0 [ 4:log/main 0.001] State start Layer 3 [10:A.ft12cemi/Conn 0.001] Start: cfg:A.ft12cemi Layer 5 [10:A.ft12cemi/Conn 0.001] Starting Layer 0 [12:log/A.ft12cemi 0.001] State start Layer 1 [13:A.ft12cemi/ft12ser 0.001] Open Layer 1 [13:A.ft12cemi/ft12ser 0.001] Opened Layer 0 [12:log/A.ft12cemi 0.001] send next Layer 6 [ 1:main 0.002] SN: OK Layer 0 [ 4:log/main 0.002] send next Layer 6 [ 2:main/L 0.002] SN: OK L Layer 2 [14:A.ft12cemi/ft12cemi 0.002] OpenL2 Layer 1 [13:A.ft12cemi/ft12ser 0.002] Send(008): F6 00 08 01 34 10 01 00 Layer 0 [13:A.ft12cemi/ft12ser 0.002] Send(015): 68 09 09 68 73 F6 00 08 01 34 10 01 00 B7 16 Layer 0 [13:A.ft12cemi/ft12ser 0.013] Read(001): E5 Layer 0 [12:log/A.ft12cemi 0.013] State started Layer 5 [10:A.ft12cemi/Conn 0.013] Started Layer 4 [10:A.ft12cemi/Conn 0.013] R state: started Layer 6 [ 1:main 0.013] SN: send_more set Layer 3 [ 5:server/Server 0.013] Start: cfg:server Layer 8 [ 5:server/Server 0.013] Open Layer 0 [ 5:server/Server 0.013] Open Layer 0 [ 5:server/Server 0.013] Openend Layer 8 [16:router/driver 0.013] OpenD Layer 8 [16:router/driver 0.014] OpenedD Layer 3 [15:router/ConnC 0.014] registerLink: router_15 Layer 3 [15:router/ConnC 0.014] Start: cfg:router Layer 5 [15:router/ConnC 0.014] Starting Layer 5 [15:router/ConnC 0.014] Started Layer 4 [15:router/ConnC 0.014] R state: started Layer 6 [ 1:main 0.014] SN: send_more set Layer 8 [ 5:server/Server 0.014] Opened Layer 5 [ 5:server/Server 0.014] Started Layer 4 [ 5:server/Server 0.014] R state: started Layer 6 [ 1:main 0.014] SN: send_more set Layer 4 [ 1:main 0.014] R state: going up triggered Layer 4 [ 1:main 0.014] R state: check start Layer 4 [ 1:main 0.014] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 3 down 0 Layer 0 [ 4:log/main 0.014] State started Layer 4 [ 1:main 0.014] R state: all drivers up Layer 4 [ 1:main 0.014] R state: up Layer 0 [ 5:server/Server 8.456] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 06 00 80 Layer 0 [ 4:log/main 8.456] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_CONNECT_REQ Layer 0 [ 4:log/main 8.456] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_CONNECT_REQ Layer 0 [12:log/A.ft12cemi 8.456] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 8.456] Has Addr 1.1.6: no Layer 1 [ 5:server/Server 8.456] Send(010): 29 00 B0 50 11 01 11 06 00 80 Layer 0 [12:log/A.ft12cemi 8.456] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 8.456] Addr Check 1.1.6: yes Layer 0 [12:log/A.ft12cemi 8.456] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_CONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 8.456] Send(010): 11 00 B0 50 11 01 11 06 00 80 Layer 6 [10:A.ft12cemi/Conn 8.456] SN: still waiting Layer 6 [ 1:main 8.456] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 8.457] Send(017): 68 0B 0B 68 53 11 00 B0 50 11 01 11 06 00 80 0D 16 Layer 0 [ 5:server/Server 8.457] Send(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 06 00 80 Layer 0 [ 5:server/Server 8.457] Dropped(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 06 00 80 Layer 0 [13:A.ft12cemi/ft12ser 8.469] Read(001): E5 Layer 0 [12:log/A.ft12cemi 8.469] send next Layer 6 [ 1:main 8.469] SN: OK Layer 0 [ 4:log/main 8.469] send next Layer 6 [ 2:main/L 8.469] SN: OK L Layer 0 [ 5:server/Server 8.476] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 06 01 43 00 Layer 0 [ 4:log/main 8.476] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 8.476] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 8.476] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 8.477] Has Addr 1.1.6: no Layer 1 [ 5:server/Server 8.477] Send(011): 29 00 B0 50 11 01 11 06 01 43 00 Layer 0 [12:log/A.ft12cemi 8.477] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 8.477] Addr Check 1.1.6: yes Layer 0 [12:log/A.ft12cemi 8.477] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 [14:A.ft12cemi] E00000000: EMI_common: send while waiting Layer 1 [13:A.ft12cemi/ft12ser 8.477] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [10:A.ft12cemi/Conn 8.477] SN: still waiting Layer 6 [ 1:main 8.477] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 8.477] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 06 01 43 00 F1 16 Layer 0 [ 5:server/Server 8.477] Send(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 06 01 43 00 Layer 0 [ 5:server/Server 8.477] Dropped(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 06 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 8.490] Read(001): E5 Layer 0 [12:log/A.ft12cemi 8.490] send next Layer 6 [ 1:main 8.490] SN: OK Layer 0 [ 4:log/main 8.490] send next Layer 6 [ 2:main/L 8.490] SN: OK L Layer 0 [ 5:server/Server 8.499] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 8.499] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 0 [ 4:log/main 8.499] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [ 5:server/Server 8.499] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [12:log/A.ft12cemi 8.499] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 8.499] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 8.499] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read [14:A.ft12cemi] E00000000: EMI_common: send while waiting Layer 1 [13:A.ft12cemi/ft12ser 8.499] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00 Layer 6 [10:A.ft12cemi/Conn 8.499] SN: still waiting Layer 6 [ 1:main 8.499] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 8.499] Send(018): 68 0C 0C 68 53 11 00 B0 D0 11 01 00 00 01 01 00 F8 16 Layer 0 [ 5:server/Server 8.499] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [ 5:server/Server 8.499] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 8.512] Read(001): E5 Layer 0 [12:log/A.ft12cemi 8.512] send next Layer 6 [ 1:main 8.512] SN: OK Layer 0 [ 4:log/main 8.512] send next Layer 6 [ 2:main/L 8.512] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 8.560] Read(008): 68 0B 0B 68 F3 2E 00 91 Layer 0 [13:A.ft12cemi/ft12ser 8.565] Read(008): 50 11 01 11 06 00 80 AB Layer 0 [13:A.ft12cemi/ft12ser 8.567] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 8.567] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 8.567] RecvEMI(010): 2E 00 91 50 11 01 11 06 00 80 Layer 2 [14:A.ft12cemi/ft12cemi 8.567] Confirmed Layer 0 [12:log/A.ft12cemi 8.567] send next Layer 6 [ 1:main 8.567] SN: send_more set Layer 0 [13:A.ft12cemi/ft12ser 8.639] Read(008): 68 0C 0C 68 D3 2E 00 91 Layer 0 [13:A.ft12cemi/ft12ser 8.644] Read(008): 50 11 01 11 06 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 8.647] Read(002): 4F 16 Layer 0 [13:A.ft12cemi/ft12ser 8.647] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 8.647] RecvEMI(011): 2E 00 91 50 11 01 11 06 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 8.647] spurious Confirm Layer 0 [13:A.ft12cemi/ft12ser 8.669] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 8.674] Read(008): D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 8.677] Read(002): B5 16 Layer 0 [13:A.ft12cemi/ft12ser 8.677] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 8.677] RecvEMI(011): 2E 00 B0 D0 11 01 00 00 01 01 00 Layer 2 [14:A.ft12cemi/ft12cemi 8.677] spurious Confirm Layer 0 [13:A.ft12cemi/ft12ser 8.688] Read(008): 68 0C 0C 68 D3 29 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 8.693] Read(008): E0 11 0A 00 00 01 01 40 Layer 0 [13:A.ft12cemi/ft12ser 8.696] Read(002): E9 16 Layer 0 [13:A.ft12cemi/ft12ser 8.696] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 8.696] RecvEMI(011): 29 00 B0 E0 11 0A 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 8.696] Recv L_Data system from 1.1.10 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [12:log/A.ft12cemi 8.696] Has Addr 1.1.10: no Layer 8 [ 1:main 8.696] unknown addr 1.1.10 Layer 0 [12:log/A.ft12cemi 8.696] Add Addr 1.1.10 Layer 0 [ 4:log/main 8.696] Recv L_Data system from 1.1.10 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [ 4:log/main 8.696] Send L_Data system from 1.1.10 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 1 [ 5:server/Server 8.696] Send(011): 29 00 B0 D0 11 0A 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 8.696] Has Addr 1.1.10: yes Layer 6 [ 1:main 8.696] SN: OK Layer 0 [ 4:log/main 8.696] send next Layer 6 [ 2:main/L 8.696] SN: OK L Layer 0 [ 5:server/Server 8.696] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 0A 00 00 01 01 40 Layer 0 [ 5:server/Server 8.697] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 0A 00 00 01 01 40 Layer 0 [ 5:server/Server 11.479] Recv(019): 06 10 05 30 00 13 29 00 B0 E0 11 01 00 00 03 00 C0 11 06 Layer 0 [ 4:log/main 11.479] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Write 1.1.6 Layer 0 [ 4:log/main 11.480] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Write 1.1.6 Layer 1 [ 5:server/Server 11.480] Send(013): 29 00 B0 D0 11 01 00 00 03 00 C0 11 06 Layer 0 [12:log/A.ft12cemi 11.480] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 11.480] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 11.480] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Write 1.1.6 Layer 1 [13:A.ft12cemi/ft12ser 11.480] Send(013): 11 00 B0 D0 11 01 00 00 03 00 C0 11 06 Layer 6 [10:A.ft12cemi/Conn 11.480] SN: still waiting Layer 6 [ 1:main 11.480] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 11.480] Send(020): 68 0E 0E 68 73 11 00 B0 D0 11 01 00 00 03 00 C0 11 06 F0 16 Layer 0 [ 5:server/Server 11.480] Send(019): 06 10 05 30 00 13 29 00 B0 D0 11 01 00 00 03 00 C0 11 06 Layer 0 [ 5:server/Server 11.480] Dropped(019): 06 10 05 30 00 13 29 00 B0 D0 11 01 00 00 03 00 C0 11 06 Layer 0 [13:A.ft12cemi/ft12ser 11.494] Read(001): E5 Layer 0 [12:log/A.ft12cemi 11.494] send next Layer 6 [ 1:main 11.494] SN: OK Layer 0 [ 4:log/main 11.494] send next Layer 6 [ 2:main/L 11.494] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 11.540] Read(008): 68 0E 0E 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 11.545] Read(008): D0 11 01 00 00 03 00 C0 Layer 0 [13:A.ft12cemi/ft12ser 11.549] Read(004): 11 06 8D 16 Layer 0 [13:A.ft12cemi/ft12ser 11.549] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 11.549] RecvEMI(013): 2E 00 B0 D0 11 01 00 00 03 00 C0 11 06 Layer 2 [14:A.ft12cemi/ft12cemi 11.549] Confirmed Layer 0 [12:log/A.ft12cemi 11.549] send next Layer 6 [ 1:main 11.549] SN: send_more set Layer 0 [ 5:server/Server 11.680] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 11.680] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 0 [ 4:log/main 11.680] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [ 5:server/Server 11.680] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [12:log/A.ft12cemi 11.680] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 11.680] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 11.680] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [13:A.ft12cemi/ft12ser 11.680] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00 Layer 6 [10:A.ft12cemi/Conn 11.680] SN: still waiting Layer 6 [ 1:main 11.680] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 11.680] Send(018): 68 0C 0C 68 53 11 00 B0 D0 11 01 00 00 01 01 00 F8 16 Layer 0 [ 5:server/Server 11.680] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [ 5:server/Server 11.681] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 11.693] Read(001): E5 Layer 0 [12:log/A.ft12cemi 11.693] send next Layer 6 [ 1:main 11.693] SN: OK Layer 0 [ 4:log/main 11.693] send next Layer 6 [ 2:main/L 11.693] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 11.737] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 11.742] Read(008): D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 11.745] Read(002): 95 16 Layer 0 [13:A.ft12cemi/ft12ser 11.745] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 11.745] RecvEMI(011): 2E 00 B0 D0 11 01 00 00 01 01 00 Layer 2 [14:A.ft12cemi/ft12cemi 11.745] Confirmed Layer 0 [12:log/A.ft12cemi 11.745] send next Layer 6 [ 1:main 11.745] SN: send_more set Layer 0 [13:A.ft12cemi/ft12ser 11.757] Read(008): 68 0C 0C 68 F3 29 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 11.762] Read(008): E0 11 06 00 00 01 01 40 Layer 0 [13:A.ft12cemi/ft12ser 11.765] Read(002): 05 16 Layer 0 [13:A.ft12cemi/ft12ser 11.765] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 11.765] RecvEMI(011): 29 00 B0 E0 11 06 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 11.765] Recv L_Data system from 1.1.6 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [12:log/A.ft12cemi 11.765] Has Addr 1.1.6: no Layer 8 [ 1:main 11.765] unknown addr 1.1.6 Layer 0 [12:log/A.ft12cemi 11.765] Add Addr 1.1.6 Layer 0 [ 4:log/main 11.765] Recv L_Data system from 1.1.6 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [ 4:log/main 11.765] Send L_Data system from 1.1.6 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 1 [ 5:server/Server 11.765] Send(011): 29 00 B0 D0 11 06 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 11.765] Has Addr 1.1.6: yes Layer 6 [ 1:main 11.765] SN: OK Layer 0 [ 4:log/main 11.765] send next Layer 6 [ 2:main/L 11.765] SN: OK L Layer 0 [ 5:server/Server 11.765] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 06 00 00 01 01 40 Layer 0 [ 5:server/Server 11.765] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 06 00 00 01 01 40 Layer 0 [ 5:server/Server 11.881] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 06 00 80 Layer 0 [ 4:log/main 11.881] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_CONNECT_REQ Layer 0 [ 4:log/main 11.881] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_CONNECT_REQ Layer 0 [12:log/A.ft12cemi 11.881] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 11.881] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 11.881] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 11.882] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 11.882] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_CONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 11.882] Send(010): 11 00 B0 50 11 01 11 06 00 80 Layer 6 [10:A.ft12cemi/Conn 11.882] SN: still waiting Layer 6 [ 1:main 11.882] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 11.882] Send(017): 68 0B 0B 68 73 11 00 B0 50 11 01 11 06 00 80 2D 16 Layer 0 [13:A.ft12cemi/ft12ser 11.894] Read(001): E5 Layer 0 [12:log/A.ft12cemi 11.894] send next Layer 6 [ 1:main 11.894] SN: OK Layer 0 [ 4:log/main 11.894] send next Layer 6 [ 2:main/L 11.894] SN: OK L Layer 0 [ 5:server/Server 11.901] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 06 01 43 00 Layer 0 [ 4:log/main 11.901] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 11.901] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 11.901] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 11.901] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 11.901] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 11.901] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 11.901] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 [14:A.ft12cemi] E00000000: EMI_common: send while waiting Layer 1 [13:A.ft12cemi/ft12ser 11.901] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [10:A.ft12cemi/Conn 11.901] SN: still waiting Layer 6 [ 1:main 11.901] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 11.901] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 06 01 43 00 D1 16 Layer 0 [13:A.ft12cemi/ft12ser 11.914] Read(001): E5 Layer 0 [12:log/A.ft12cemi 11.914] send next Layer 6 [ 1:main 11.914] SN: OK Layer 0 [ 4:log/main 11.914] send next Layer 6 [ 2:main/L 11.914] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 11.934] Read(008): 68 0B 0B 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 11.939] Read(008): 50 11 01 11 06 00 80 AA Layer 0 [13:A.ft12cemi/ft12ser 11.941] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 11.941] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 11.941] RecvEMI(010): 2E 00 B0 50 11 01 11 06 00 80 Layer 2 [14:A.ft12cemi/ft12cemi 11.941] Confirmed Layer 0 [12:log/A.ft12cemi 11.941] send next Layer 6 [ 1:main 11.941] SN: send_more set Layer 0 [13:A.ft12cemi/ft12ser 11.964] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 11.969] Read(008): 50 11 01 11 06 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 11.972] Read(002): 8E 16 Layer 0 [13:A.ft12cemi/ft12ser 11.972] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 11.972] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 11.972] spurious Confirm Layer 0 [ 5:server/Server 14.913] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 06 01 43 00 Layer 0 [ 4:log/main 14.913] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 14.914] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 14.914] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 14.914] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 14.914] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 14.914] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 14.914] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 14.914] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [10:A.ft12cemi/Conn 14.914] SN: still waiting Layer 6 [ 1:main 14.914] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 14.914] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 06 01 43 00 F1 16 Layer 0 [13:A.ft12cemi/ft12ser 14.927] Read(001): E5 Layer 0 [12:log/A.ft12cemi 14.927] send next Layer 6 [ 1:main 14.927] SN: OK Layer 0 [ 4:log/main 14.927] send next Layer 6 [ 2:main/L 14.927] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 14.969] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 14.974] Read(008): 50 11 01 11 06 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 14.976] Read(002): 6E 16 Layer 0 [13:A.ft12cemi/ft12ser 14.976] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 14.976] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 14.977] Confirmed Layer 0 [12:log/A.ft12cemi 14.977] send next Layer 6 [ 1:main 14.977] SN: send_more set Layer 0 [ 5:server/Server 17.925] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 06 01 43 00 Layer 0 [ 4:log/main 17.925] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 17.925] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 17.925] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 17.925] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 17.925] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 17.925] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 17.926] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 17.926] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [10:A.ft12cemi/Conn 17.926] SN: still waiting Layer 6 [ 1:main 17.926] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 17.926] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 06 01 43 00 D1 16 Layer 0 [13:A.ft12cemi/ft12ser 17.938] Read(001): E5 Layer 0 [12:log/A.ft12cemi 17.938] send next Layer 6 [ 1:main 17.938] SN: OK Layer 0 [ 4:log/main 17.938] send next Layer 6 [ 2:main/L 17.939] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 18.042] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 18.046] Read(008): 50 11 01 11 06 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 18.049] Read(002): 8E 16 Layer 0 [13:A.ft12cemi/ft12ser 18.049] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 18.049] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 18.049] Confirmed Layer 0 [12:log/A.ft12cemi 18.049] send next Layer 6 [ 1:main 18.049] SN: send_more set Layer 0 [ 5:server/Server 20.927] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 06 01 43 00 Layer 0 [ 4:log/main 20.927] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 20.927] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 20.927] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 20.927] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 20.927] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 20.927] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 20.927] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 20.927] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [10:A.ft12cemi/Conn 20.927] SN: still waiting Layer 6 [ 1:main 20.927] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 20.927] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 06 01 43 00 F1 16 Layer 0 [13:A.ft12cemi/ft12ser 20.940] Read(001): E5 Layer 0 [12:log/A.ft12cemi 20.940] send next Layer 6 [ 1:main 20.940] SN: OK Layer 0 [ 4:log/main 20.940] send next Layer 6 [ 2:main/L 20.940] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 21.002] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 21.006] Read(008): 50 11 01 11 06 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 21.009] Read(002): 6E 16 Layer 0 [13:A.ft12cemi/ft12ser 21.009] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 21.009] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 21.009] Confirmed Layer 0 [12:log/A.ft12cemi 21.009] send next Layer 6 [ 1:main 21.009] SN: send_more set Layer 0 [ 5:server/Server 23.938] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 06 00 81 Layer 0 [ 4:log/main 23.938] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_DISCONNECT_REQ Layer 0 [ 4:log/main 23.939] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DISCONNECT_REQ Layer 0 [12:log/A.ft12cemi 23.939] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 23.939] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 23.939] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 23.939] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 23.939] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DISCONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 23.939] Send(010): 11 00 B0 50 11 01 11 06 00 81 Layer 6 [10:A.ft12cemi/Conn 23.939] SN: still waiting Layer 6 [ 1:main 23.939] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 23.939] Send(017): 68 0B 0B 68 53 11 00 B0 50 11 01 11 06 00 81 0E 16 Layer 0 [13:A.ft12cemi/ft12ser 23.951] Read(001): E5 Layer 0 [12:log/A.ft12cemi 23.951] send next Layer 6 [ 1:main 23.951] SN: OK Layer 0 [ 4:log/main 23.951] send next Layer 6 [ 2:main/L 23.952] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 24.020] Read(008): 68 0B 0B 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 24.025] Read(008): 50 11 01 11 06 00 81 CB Layer 0 [13:A.ft12cemi/ft12ser 24.027] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 24.027] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 24.027] RecvEMI(010): 2E 00 B0 50 11 01 11 06 00 81 Layer 2 [14:A.ft12cemi/ft12cemi 24.028] Confirmed Layer 0 [12:log/A.ft12cemi 24.028] send next Layer 6 [ 1:main 24.028] SN: send_more set Layer 0 [ 5:server/Server 24.445] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 06 00 80 Layer 0 [ 4:log/main 24.445] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_CONNECT_REQ Layer 0 [ 4:log/main 24.445] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_CONNECT_REQ Layer 0 [12:log/A.ft12cemi 24.445] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 24.445] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 24.445] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 24.445] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 24.445] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_CONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 24.445] Send(010): 11 00 B0 50 11 01 11 06 00 80 Layer 6 [10:A.ft12cemi/Conn 24.445] SN: still waiting Layer 6 [ 1:main 24.445] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 24.445] Send(017): 68 0B 0B 68 73 11 00 B0 50 11 01 11 06 00 80 2D 16 Layer 0 [13:A.ft12cemi/ft12ser 24.457] Read(001): E5 Layer 0 [12:log/A.ft12cemi 24.457] send next Layer 6 [ 1:main 24.458] SN: OK Layer 0 [ 4:log/main 24.458] send next Layer 6 [ 2:main/L 24.458] SN: OK L Layer 0 [ 5:server/Server 24.462] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 06 01 43 00 Layer 0 [ 4:log/main 24.462] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 24.462] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 24.462] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 24.462] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 24.462] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 24.462] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 24.462] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 [14:A.ft12cemi] E00000000: EMI_common: send while waiting Layer 1 [13:A.ft12cemi/ft12ser 24.463] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [10:A.ft12cemi/Conn 24.463] SN: still waiting Layer 6 [ 1:main 24.463] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 24.463] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 06 01 43 00 D1 16 Layer 0 [13:A.ft12cemi/ft12ser 24.475] Read(001): E5 Layer 0 [12:log/A.ft12cemi 24.475] send next Layer 6 [ 1:main 24.475] SN: OK Layer 0 [ 4:log/main 24.475] send next Layer 6 [ 2:main/L 24.475] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 24.499] Read(008): 68 0B 0B 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 24.504] Read(008): 50 11 01 11 06 00 80 AA Layer 0 [13:A.ft12cemi/ft12ser 24.506] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 24.506] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 24.506] RecvEMI(010): 2E 00 B0 50 11 01 11 06 00 80 Layer 2 [14:A.ft12cemi/ft12cemi 24.506] Confirmed Layer 0 [12:log/A.ft12cemi 24.506] send next Layer 6 [ 1:main 24.506] SN: send_more set Layer 0 [13:A.ft12cemi/ft12ser 24.528] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 24.533] Read(008): 50 11 01 11 06 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 24.536] Read(002): 8E 16 Layer 0 [13:A.ft12cemi/ft12ser 24.536] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 24.536] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 24.536] spurious Confirm Layer 0 [ 5:server/Server 27.475] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 06 01 43 00 Layer 0 [ 4:log/main 27.475] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 27.475] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 27.475] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 27.475] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 27.475] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 27.475] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 27.475] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 27.475] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [10:A.ft12cemi/Conn 27.475] SN: still waiting Layer 6 [ 1:main 27.475] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 27.475] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 06 01 43 00 F1 16 Layer 0 [13:A.ft12cemi/ft12ser 27.488] Read(001): E5 Layer 0 [12:log/A.ft12cemi 27.488] send next Layer 6 [ 1:main 27.488] SN: OK Layer 0 [ 4:log/main 27.488] send next Layer 6 [ 2:main/L 27.488] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 27.533] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 27.538] Read(008): 50 11 01 11 06 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 27.541] Read(002): 6E 16 Layer 0 [13:A.ft12cemi/ft12ser 27.541] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 27.541] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 27.541] Confirmed Layer 0 [12:log/A.ft12cemi 27.541] send next Layer 6 [ 1:main 27.541] SN: send_more set Layer 0 [ 5:server/Server 30.487] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 06 01 43 00 Layer 0 [ 4:log/main 30.487] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 30.487] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 30.487] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 30.487] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 30.487] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 30.487] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 30.487] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 30.487] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [10:A.ft12cemi/Conn 30.487] SN: still waiting Layer 6 [ 1:main 30.487] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 30.487] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 06 01 43 00 D1 16 Layer 0 [13:A.ft12cemi/ft12ser 30.500] Read(001): E5 Layer 0 [12:log/A.ft12cemi 30.500] send next Layer 6 [ 1:main 30.500] SN: OK Layer 0 [ 4:log/main 30.500] send next Layer 6 [ 2:main/L 30.500] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 30.542] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 30.547] Read(008): 50 11 01 11 06 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 30.550] Read(002): 8E 16 Layer 0 [13:A.ft12cemi/ft12ser 30.550] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 30.550] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 30.550] Confirmed Layer 0 [12:log/A.ft12cemi 30.550] send next Layer 6 [ 1:main 30.550] SN: send_more set Layer 0 [ 5:server/Server 33.498] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 06 01 43 00 Layer 0 [ 4:log/main 33.499] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 33.499] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 33.499] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 33.499] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 33.499] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 33.499] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 33.499] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 33.499] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [10:A.ft12cemi/Conn 33.499] SN: still waiting Layer 6 [ 1:main 33.499] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 33.499] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 06 01 43 00 F1 16 Layer 0 [13:A.ft12cemi/ft12ser 33.512] Read(001): E5 Layer 0 [12:log/A.ft12cemi 33.512] send next Layer 6 [ 1:main 33.512] SN: OK Layer 0 [ 4:log/main 33.512] send next Layer 6 [ 2:main/L 33.512] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 33.567] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 33.572] Read(008): 50 11 01 11 06 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 33.574] Read(002): 6E 16 Layer 0 [13:A.ft12cemi/ft12ser 33.574] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 33.574] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 33.574] Confirmed Layer 0 [12:log/A.ft12cemi 33.574] send next Layer 6 [ 1:main 33.574] SN: send_more set Layer 0 [ 5:server/Server 36.509] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 06 00 81 Layer 0 [ 4:log/main 36.509] Recv L_Data system from 1.1.1 to 1.1.6 hops: 06 T_DISCONNECT_REQ Layer 0 [ 4:log/main 36.509] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DISCONNECT_REQ Layer 0 [12:log/A.ft12cemi 36.509] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 36.509] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 36.509] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 36.509] Has Addr 1.1.6: yes Layer 0 [12:log/A.ft12cemi 36.509] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DISCONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 36.509] Send(010): 11 00 B0 50 11 01 11 06 00 81 Layer 6 [10:A.ft12cemi/Conn 36.509] SN: still waiting Layer 6 [ 1:main 36.509] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 36.510] Send(017): 68 0B 0B 68 53 11 00 B0 50 11 01 11 06 00 81 0E 16 Layer 0 [13:A.ft12cemi/ft12ser 36.522] Read(001): E5 Layer 0 [12:log/A.ft12cemi 36.522] send next Layer 6 [ 1:main 36.522] SN: OK Layer 0 [ 4:log/main 36.522] send next Layer 6 [ 2:main/L 36.522] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 36.586] Read(008): 68 0B 0B 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 36.590] Read(008): 50 11 01 11 06 00 81 CB Layer 0 [13:A.ft12cemi/ft12ser 36.593] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 36.593] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 36.593] RecvEMI(010): 2E 00 B0 50 11 01 11 06 00 81 Layer 2 [14:A.ft12cemi/ft12cemi 36.593] Confirmed Layer 0 [12:log/A.ft12cemi 36.593] send next Layer 6 [ 1:main 36.593] SN: send_more set
Kommentar
-
Ah. Ursache gefunden, Patch muss getestet werden. Heute nachmittag.DistKV, Home Assistant, 1wire, KNX, Python, Asterisk, SMD-LötkolbenKommentar
-
:-) Super! Vielen Dank. Wenn ich was testen kann sag mir Bescheid. Denke das ist auch der Grund warum Appl. Programm Programmieren auf den selbigen Fehler läuft.Kommentar
-
Vergiss den Nachmittag, ich habe den Patch eben erfolgreich auf ein USB-Interface losgelassen.
Müsste jetzt funktionieren. Testest du bitte nochmal?Zuletzt geändert von Smurf; 21.03.2017, 08:42.DistKV, Home Assistant, 1wire, KNX, Python, Asterisk, SMD-LötkolbenKommentar
-
hmmm optisch sieht der Fehler noch gleich aus...
Code:root@raspberrypi:~# knxd test Layer 4 [ 1:main 0.000] R state: initialized [ 1:main] I00000000: 0.14.2:949290a: knxd test Layer 4 [ 1:main 0.000] R state: setting up Layer 0 [ 4:log/main 0.000] State setup Layer 6 [ 1:main 0.000] SN: OK Layer 0 [ 4:log/main 0.000] send next Layer 6 [ 2:main/L 0.000] SN: OK L Layer 6 [ 1:main 0.001] SN: send_more set Layer 3 [ 5:server/Server 0.001] registerLink: server Layer 0 [12:log/A.ft12cemi 0.001] State setup Layer 3 [10:A.ft12cemi/Conn 0.001] registerLink: A.ft12cemi [ 1:main] I00000055: Connected: cfg:A.ft12cemi. [ 1:main] I00000055: Connected: cfg:server. Layer 4 [ 1:main 0.001] R state: setup OK [ 1:main] W00000020: knxd should not run as root Layer 4 [ 1:main 0.001] R state: trigger going up Layer 0 [ 4:log/main 0.001] State start Layer 3 [10:A.ft12cemi/Conn 0.001] Start: cfg:A.ft12cemi Layer 5 [10:A.ft12cemi/Conn 0.001] Starting Layer 0 [12:log/A.ft12cemi 0.001] State start Layer 1 [13:A.ft12cemi/ft12ser 0.001] Open Layer 1 [13:A.ft12cemi/ft12ser 0.002] Opened Layer 0 [12:log/A.ft12cemi 0.002] send next Layer 6 [ 1:main 0.002] SN: send_more set Layer 2 [14:A.ft12cemi/ft12cemi 0.002] OpenL2 Layer 1 [13:A.ft12cemi/ft12ser 0.002] Send(008): F6 00 08 01 34 10 01 00 Layer 0 [13:A.ft12cemi/ft12ser 0.002] Send(015): 68 09 09 68 73 F6 00 08 01 34 10 01 00 B7 16 Layer 0 [13:A.ft12cemi/ft12ser 0.013] Read(001): E5 Layer 0 [12:log/A.ft12cemi 0.013] State started Layer 5 [10:A.ft12cemi/Conn 0.013] Started Layer 4 [10:A.ft12cemi/Conn 0.013] R state: started Layer 6 [ 1:main 0.013] SN: send_more set Layer 3 [ 5:server/Server 0.013] Start: cfg:server Layer 8 [ 5:server/Server 0.013] Open Layer 0 [ 5:server/Server 0.013] Open Layer 0 [ 5:server/Server 0.013] Openend Layer 8 [16:router/driver 0.013] OpenD Layer 8 [16:router/driver 0.014] OpenedD Layer 3 [15:router/ConnC 0.014] registerLink: router_15 Layer 3 [15:router/ConnC 0.014] Start: cfg:router Layer 5 [15:router/ConnC 0.014] Starting Layer 5 [15:router/ConnC 0.014] Started Layer 4 [15:router/ConnC 0.014] R state: started Layer 6 [ 1:main 0.014] SN: send_more set Layer 8 [ 5:server/Server 0.014] Opened Layer 5 [ 5:server/Server 0.014] Started Layer 4 [ 5:server/Server 0.014] R state: started Layer 6 [ 1:main 0.014] SN: send_more set Layer 4 [ 1:main 0.014] R state: going up triggered Layer 4 [ 1:main 0.014] R state: check start Layer 4 [ 1:main 0.014] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 3 down 0 Layer 0 [ 4:log/main 0.014] State started Layer 4 [ 1:main 0.014] R state: all drivers up Layer 4 [ 1:main 0.014] R state: up Layer 0 [13:A.ft12cemi/ft12ser 0.033] Read(008): 68 08 08 68 F3 F5 00 08 Layer 0 [13:A.ft12cemi/ft12ser 0.038] Read(006): 01 34 10 01 36 16 Layer 0 [13:A.ft12cemi/ft12ser 0.038] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 0.038] RecvEMI(007): F5 00 08 01 34 10 01 Layer 2 [14:A.ft12cemi/ft12cemi 0.038] unknown data Layer 0 [ 5:server/Server 11.006] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 80 Layer 0 [ 4:log/main 11.006] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_CONNECT_REQ Layer 0 [ 4:log/main 11.007] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 0 [12:log/A.ft12cemi 11.007] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 11.007] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 11.007] Send(010): 29 00 B0 50 11 01 11 0A 00 80 Layer 0 [12:log/A.ft12cemi 11.007] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 11.007] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 11.007] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 11.007] Send(010): 11 00 B0 50 11 01 11 0A 00 80 Layer 6 [10:A.ft12cemi/Conn 11.007] SN: still waiting Layer 6 [ 1:main 11.007] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 11.007] Send(017): 68 0B 0B 68 53 11 00 B0 50 11 01 11 0A 00 80 11 16 Layer 0 [ 5:server/Server 11.007] Send(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 0A 00 80 Layer 0 [ 5:server/Server 11.007] Dropped(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 0A 00 80 Layer 0 [13:A.ft12cemi/ft12ser 11.019] Read(001): E5 Layer 0 [ 5:server/Server 11.025] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 11.026] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 6 [ 1:main 11.026] SN: wait L Layer 0 [ 5:server/Server 11.046] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 11.046] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 11.046] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 11.063] Read(008): 68 0B 0B 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 11.068] Read(008): 50 11 01 11 0A 00 80 AE Layer 0 [13:A.ft12cemi/ft12ser 11.070] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 11.070] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 11.070] RecvEMI(010): 2E 00 B0 50 11 01 11 0A 00 80 Layer 2 [14:A.ft12cemi/ft12cemi 11.070] Confirmed Layer 0 [12:log/A.ft12cemi 11.070] send next Layer 6 [ 1:main 11.070] SN: OK Layer 0 [ 4:log/main 11.070] send next Layer 6 [ 2:main/L 11.071] SN: OK L Layer 0 [ 4:log/main 11.071] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 11.071] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 11.071] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 11.071] Send(011): 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [12:log/A.ft12cemi 11.071] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 11.071] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 11.071] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 11.071] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 11.071] SN: still waiting Layer 6 [ 1:main 11.071] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 11.071] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [ 5:server/Server 11.071] Send(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [ 5:server/Server 11.071] Dropped(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 11.084] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 11.127] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 11.132] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 11.135] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 11.135] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 11.135] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 11.135] Confirmed Layer 0 [12:log/A.ft12cemi 11.135] send next Layer 6 [ 1:main 11.135] SN: OK Layer 0 [ 4:log/main 11.135] send next Layer 6 [ 2:main/L 11.135] SN: OK L Layer 0 [ 4:log/main 11.135] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [ 5:server/Server 11.135] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [12:log/A.ft12cemi 11.135] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 11.135] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 11.135] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [13:A.ft12cemi/ft12ser 11.135] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00 Layer 6 [10:A.ft12cemi/Conn 11.135] SN: still waiting Layer 6 [ 1:main 11.135] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 11.136] Send(018): 68 0C 0C 68 53 11 00 B0 D0 11 01 00 00 01 01 00 F8 16 Layer 0 [ 5:server/Server 11.136] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [ 5:server/Server 11.136] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 11.148] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 11.231] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 11.236] Read(008): D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 11.239] Read(002): 95 16 Layer 0 [13:A.ft12cemi/ft12ser 11.239] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 11.239] RecvEMI(011): 2E 00 B0 D0 11 01 00 00 01 01 00 Layer 2 [14:A.ft12cemi/ft12cemi 11.239] Confirmed Layer 0 [12:log/A.ft12cemi 11.239] send next Layer 6 [ 1:main 11.239] SN: OK Layer 0 [ 4:log/main 11.239] send next Layer 6 [ 2:main/L 11.239] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 11.314] Read(008): 68 0C 0C 68 F3 29 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 11.319] Read(008): E0 11 0A 00 00 01 01 40 Layer 0 [13:A.ft12cemi/ft12ser 11.322] Read(002): 09 16 Layer 0 [13:A.ft12cemi/ft12ser 11.322] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 11.322] RecvEMI(011): 29 00 B0 E0 11 0A 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 11.322] Recv L_Data system from 1.1.10 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [12:log/A.ft12cemi 11.322] Has Addr 1.1.10: no Layer 8 [ 1:main 11.322] unknown addr 1.1.10 Layer 0 [12:log/A.ft12cemi 11.322] Add Addr 1.1.10 Layer 0 [ 4:log/main 11.322] Recv L_Data system from 1.1.10 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [ 4:log/main 11.322] Send L_Data system from 1.1.10 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 1 [ 5:server/Server 11.322] Send(011): 29 00 B0 D0 11 0A 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 11.322] Has Addr 1.1.10: yes Layer 6 [ 1:main 11.322] SN: OK Layer 0 [ 4:log/main 11.322] send next Layer 6 [ 2:main/L 11.322] SN: OK L Layer 0 [ 5:server/Server 11.322] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 0A 00 00 01 01 40 Layer 0 [ 5:server/Server 11.323] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 0A 00 00 01 01 40 Layer 0 [ 5:server/Server 11.426] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 81 Layer 0 [ 4:log/main 11.426] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DISCONNECT_REQ Layer 0 [ 4:log/main 11.426] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 0 [12:log/A.ft12cemi 11.426] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 11.426] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 11.426] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 11.426] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 11.426] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 11.426] Send(010): 11 00 B0 50 11 01 11 0A 00 81 Layer 6 [10:A.ft12cemi/Conn 11.426] SN: still waiting Layer 6 [ 1:main 11.426] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 11.426] Send(017): 68 0B 0B 68 73 11 00 B0 50 11 01 11 0A 00 81 32 16 Layer 0 [13:A.ft12cemi/ft12ser 11.438] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 11.482] Read(008): 68 0B 0B 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 11.487] Read(008): 50 11 01 11 0A 00 81 AF Layer 0 [13:A.ft12cemi/ft12ser 11.489] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 11.489] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 11.489] RecvEMI(010): 2E 00 B0 50 11 01 11 0A 00 81 Layer 2 [14:A.ft12cemi/ft12cemi 11.489] Confirmed Layer 0 [12:log/A.ft12cemi 11.489] send next Layer 6 [ 1:main 11.489] SN: OK Layer 0 [ 4:log/main 11.489] send next Layer 6 [ 2:main/L 11.489] SN: OK L Layer 0 [ 5:server/Server 14.029] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 80 Layer 0 [ 4:log/main 14.029] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_CONNECT_REQ Layer 0 [ 4:log/main 14.030] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 0 [12:log/A.ft12cemi 14.030] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 14.030] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 14.030] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 14.030] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 14.030] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 14.030] Send(010): 11 00 B0 50 11 01 11 0A 00 80 Layer 6 [10:A.ft12cemi/Conn 14.030] SN: still waiting Layer 6 [ 1:main 14.030] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 14.030] Send(017): 68 0B 0B 68 53 11 00 B0 50 11 01 11 0A 00 80 11 16 Layer 0 [13:A.ft12cemi/ft12ser 14.042] Read(001): E5 Layer 0 [ 5:server/Server 14.047] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 14.047] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 6 [ 1:main 14.047] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 14.086] Read(008): 68 0B 0B 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 14.091] Read(008): 50 11 01 11 0A 00 80 CE Layer 0 [13:A.ft12cemi/ft12ser 14.093] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 14.093] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 14.093] RecvEMI(010): 2E 00 B0 50 11 01 11 0A 00 80 Layer 2 [14:A.ft12cemi/ft12cemi 14.093] Confirmed Layer 0 [12:log/A.ft12cemi 14.093] send next Layer 6 [ 1:main 14.093] SN: OK Layer 0 [ 4:log/main 14.093] send next Layer 6 [ 2:main/L 14.093] SN: OK L Layer 0 [ 4:log/main 14.093] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 14.093] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 14.093] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 14.094] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 14.094] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 14.094] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 14.094] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 14.094] SN: still waiting Layer 6 [ 1:main 14.094] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 14.094] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [13:A.ft12cemi/ft12ser 14.106] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 14.150] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 14.155] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 14.158] Read(002): 72 16 Layer 0 [13:A.ft12cemi/ft12ser 14.158] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 14.158] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 14.158] Confirmed Layer 0 [12:log/A.ft12cemi 14.158] send next Layer 6 [ 1:main 14.158] SN: OK Layer 0 [ 4:log/main 14.158] send next Layer 6 [ 2:main/L 14.158] SN: OK L Layer 0 [ 5:server/Server 17.113] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 17.113] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 17.113] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 17.113] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 17.113] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 17.113] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 17.113] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 17.113] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 17.113] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 17.113] SN: still waiting Layer 6 [ 1:main 17.113] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 17.113] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 0A 01 43 00 D5 16 Layer 0 [13:A.ft12cemi/ft12ser 17.126] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 17.167] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 17.172] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 17.175] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 17.175] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 17.175] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 17.175] Confirmed Layer 0 [12:log/A.ft12cemi 17.175] send next Layer 6 [ 1:main 17.175] SN: OK Layer 0 [ 4:log/main 17.175] send next Layer 6 [ 2:main/L 17.175] SN: OK L Layer 0 [ 5:server/Server 20.071] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 20.071] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 20.072] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 20.072] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 20.072] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 20.072] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 20.072] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 20.072] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 20.072] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 20.072] SN: still waiting Layer 6 [ 1:main 20.072] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 20.072] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [13:A.ft12cemi/ft12ser 20.085] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 20.126] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 20.131] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 20.133] Read(002): 72 16 Layer 0 [13:A.ft12cemi/ft12ser 20.133] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 20.133] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 20.133] Confirmed Layer 0 [12:log/A.ft12cemi 20.134] send next Layer 6 [ 1:main 20.134] SN: OK Layer 0 [ 4:log/main 20.134] send next Layer 6 [ 2:main/L 20.134] SN: OK L Layer 0 [ 5:server/Server 23.068] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 23.068] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 23.068] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 23.068] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 23.068] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 23.069] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 23.069] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 23.069] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 23.069] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 23.069] SN: still waiting Layer 6 [ 1:main 23.069] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 23.069] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 0A 01 43 00 D5 16 Layer 0 [13:A.ft12cemi/ft12ser 23.081] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 23.124] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 23.128] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 23.131] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 23.131] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 23.131] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 23.131] Confirmed Layer 0 [12:log/A.ft12cemi 23.131] send next Layer 6 [ 1:main 23.131] SN: OK Layer 0 [ 4:log/main 23.131] send next Layer 6 [ 2:main/L 23.131] SN: OK L Layer 0 [ 5:server/Server 26.070] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 81 Layer 0 [ 4:log/main 26.070] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DISCONNECT_REQ Layer 0 [ 4:log/main 26.071] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 0 [12:log/A.ft12cemi 26.071] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 26.071] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 26.072] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 26.072] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 26.072] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 26.073] Send(010): 11 00 B0 50 11 01 11 0A 00 81 Layer 6 [10:A.ft12cemi/Conn 26.073] SN: still waiting Layer 6 [ 1:main 26.073] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 26.073] Send(017): 68 0B 0B 68 73 11 00 B0 50 11 01 11 0A 00 81 32 16 Layer 0 [13:A.ft12cemi/ft12ser 26.086] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 26.127] Read(008): 68 0B 0B 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 26.131] Read(008): 50 11 01 11 0A 00 81 AF Layer 0 [13:A.ft12cemi/ft12ser 26.133] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 26.134] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 26.134] RecvEMI(010): 2E 00 B0 50 11 01 11 0A 00 81 Layer 2 [14:A.ft12cemi/ft12cemi 26.134] Confirmed Layer 0 [12:log/A.ft12cemi 26.135] send next Layer 6 [ 1:main 26.135] SN: OK Layer 0 [ 4:log/main 26.135] send next Layer 6 [ 2:main/L 26.136] SN: OK L Layer 0 [ 5:server/Server 26.574] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 80 Layer 0 [ 4:log/main 26.574] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_CONNECT_REQ Layer 0 [ 4:log/main 26.574] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 0 [12:log/A.ft12cemi 26.574] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 26.574] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 26.575] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 26.575] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 26.575] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 26.575] Send(010): 11 00 B0 50 11 01 11 0A 00 80 Layer 6 [10:A.ft12cemi/Conn 26.575] SN: still waiting Layer 6 [ 1:main 26.575] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 26.575] Send(017): 68 0B 0B 68 53 11 00 B0 50 11 01 11 0A 00 80 11 16 Layer 0 [13:A.ft12cemi/ft12ser 26.587] Read(001): E5 Layer 0 [ 5:server/Server 26.596] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 26.597] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 6 [ 1:main 26.597] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 26.629] Read(008): 68 0B 0B 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 26.633] Read(008): 50 11 01 11 0A 00 80 CE Layer 0 [13:A.ft12cemi/ft12ser 26.635] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 26.635] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 26.635] RecvEMI(010): 2E 00 B0 50 11 01 11 0A 00 80 Layer 2 [14:A.ft12cemi/ft12cemi 26.636] Confirmed Layer 0 [12:log/A.ft12cemi 26.636] send next Layer 6 [ 1:main 26.636] SN: OK Layer 0 [ 4:log/main 26.636] send next Layer 6 [ 2:main/L 26.636] SN: OK L Layer 0 [ 4:log/main 26.636] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 26.636] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 26.636] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 26.636] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 26.636] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 26.636] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 26.636] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 26.636] SN: still waiting Layer 6 [ 1:main 26.636] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 26.636] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [13:A.ft12cemi/ft12ser 26.649] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 26.693] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 26.697] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 26.700] Read(002): 72 16 Layer 0 [13:A.ft12cemi/ft12ser 26.700] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 26.700] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 26.700] Confirmed Layer 0 [12:log/A.ft12cemi 26.700] send next Layer 6 [ 1:main 26.700] SN: OK Layer 0 [ 4:log/main 26.700] send next Layer 6 [ 2:main/L 26.700] SN: OK L Layer 0 [ 5:server/Server 29.605] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 29.605] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 29.605] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 29.605] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 29.605] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 29.605] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 29.605] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 29.605] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 29.605] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 29.605] SN: still waiting Layer 6 [ 1:main 29.605] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 29.605] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 0A 01 43 00 D5 16 Layer 0 [13:A.ft12cemi/ft12ser 29.618] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 29.660] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 29.665] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 29.668] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 29.668] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 29.668] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 29.668] Confirmed Layer 0 [12:log/A.ft12cemi 29.668] send next Layer 6 [ 1:main 29.668] SN: OK Layer 0 [ 4:log/main 29.668] send next Layer 6 [ 2:main/L 29.668] SN: OK L Layer 0 [ 5:server/Server 32.637] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 32.637] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 32.637] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 32.637] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 32.637] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 32.637] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 32.637] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 32.637] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 32.637] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 32.637] SN: still waiting Layer 6 [ 1:main 32.637] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 32.637] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [13:A.ft12cemi/ft12ser 32.650] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 32.713] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 32.718] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 32.721] Read(002): 72 16 Layer 0 [13:A.ft12cemi/ft12ser 32.721] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 32.721] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 32.721] Confirmed Layer 0 [12:log/A.ft12cemi 32.721] send next Layer 6 [ 1:main 32.721] SN: OK Layer 0 [ 4:log/main 32.721] send next Layer 6 [ 2:main/L 32.721] SN: OK L Layer 0 [ 5:server/Server 35.617] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 35.617] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 35.617] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 35.617] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 35.617] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 35.617] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 35.617] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 35.617] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 35.617] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 35.617] SN: still waiting Layer 6 [ 1:main 35.617] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 35.617] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 0A 01 43 00 D5 16 Layer 0 [13:A.ft12cemi/ft12ser 35.630] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 35.671] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 35.676] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 35.678] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 35.679] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 35.679] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 35.679] Confirmed Layer 0 [12:log/A.ft12cemi 35.679] send next Layer 6 [ 1:main 35.679] SN: OK Layer 0 [ 4:log/main 35.679] send next Layer 6 [ 2:main/L 35.679] SN: OK L Layer 0 [ 5:server/Server 38.610] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 81 Layer 0 [ 4:log/main 38.610] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DISCONNECT_REQ Layer 0 [ 4:log/main 38.610] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 0 [12:log/A.ft12cemi 38.610] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 38.610] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 38.610] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 38.610] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 38.610] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 38.610] Send(010): 11 00 B0 50 11 01 11 0A 00 81 Layer 6 [10:A.ft12cemi/Conn 38.610] SN: still waiting Layer 6 [ 1:main 38.610] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 38.610] Send(017): 68 0B 0B 68 73 11 00 B0 50 11 01 11 0A 00 81 32 16 Layer 0 [13:A.ft12cemi/ft12ser 38.622] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 38.665] Read(008): 68 0B 0B 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 38.669] Read(008): 50 11 01 11 0A 00 81 AF Layer 0 [13:A.ft12cemi/ft12ser 38.672] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 38.672] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 38.672] RecvEMI(010): 2E 00 B0 50 11 01 11 0A 00 81 Layer 2 [14:A.ft12cemi/ft12cemi 38.672] Confirmed Layer 0 [12:log/A.ft12cemi 38.672] send next Layer 6 [ 1:main 38.672] SN: OK Layer 0 [ 4:log/main 38.672] send next Layer 6 [ 2:main/L 38.672] SN: OK L
Kommentar
-
Das liegt möglicherweise daran, dass das Gerät gar nicht reagiert nachdem es teilweise programmiert wurde, was du daran siehst das es exakt gar keine Zeilen der Formgibt. Hatte ich auch heute morgen. Mal eben vom Bus abziehen, wieder aufstecken, Prog-Knopf drücken.Code:Layer 0 [12:log/A.ft12cemi … Recv L_Data …
DistKV, Home Assistant, 1wire, KNX, Python, Asterisk, SMD-LötkolbenKommentar
-
Habe gerade mal den Stecker gezogen und neu den Knopf gedrückt... Fehlermeldung heisst gerät antwortet nicht in angemessener Zeit
Update: ich habe einmal mit ETS 5.5 geschrieben mit dem Fehler und einmal eine Adresse geschrieben mit Net´n Node von Weinzierl wo es ohne Fehler geht... Logs anbei von beiden Vorgängen. Habe es auch mal mit einem anderen Gerät getestet. Gleicher Fehler
Code:ETS: Adresse 1.1.10 schreiben mit ETS 5.5 root@raspberrypi:~# knxd test Layer 4 [ 1:main 0.000] R state: initialized [ 1:main] I00000000: 0.14.2:949290a: knxd test Layer 4 [ 1:main 0.000] R state: setting up Layer 0 [ 4:log/main 0.000] State setup Layer 6 [ 1:main 0.000] SN: OK Layer 0 [ 4:log/main 0.000] send next Layer 6 [ 2:main/L 0.000] SN: OK L Layer 6 [ 1:main 0.000] SN: send_more set Layer 3 [ 5:server/Server 0.000] registerLink: server Layer 0 [12:log/A.ft12cemi 0.001] State setup Layer 3 [10:A.ft12cemi/Conn 0.001] registerLink: A.ft12cemi [ 1:main] I00000055: Connected: cfg:A.ft12cemi. [ 1:main] I00000055: Connected: cfg:server. Layer 4 [ 1:main 0.001] R state: setup OK [ 1:main] W00000020: knxd should not run as root Layer 4 [ 1:main 0.001] R state: trigger going up Layer 0 [ 4:log/main 0.001] State start Layer 3 [10:A.ft12cemi/Conn 0.001] Start: cfg:A.ft12cemi Layer 5 [10:A.ft12cemi/Conn 0.001] Starting Layer 0 [12:log/A.ft12cemi 0.001] State start Layer 1 [13:A.ft12cemi/ft12ser 0.001] Open Layer 1 [13:A.ft12cemi/ft12ser 0.002] Opened Layer 0 [12:log/A.ft12cemi 0.002] send next Layer 6 [ 1:main 0.002] SN: send_more set Layer 2 [14:A.ft12cemi/ft12cemi 0.002] OpenL2 Layer 1 [13:A.ft12cemi/ft12ser 0.002] Send(008): F6 00 08 01 34 10 01 00 Layer 0 [13:A.ft12cemi/ft12ser 0.002] Send(015): 68 09 09 68 73 F6 00 08 01 34 10 01 00 B7 16 Layer 0 [13:A.ft12cemi/ft12ser 0.013] Read(001): E5 Layer 0 [12:log/A.ft12cemi 0.013] State started Layer 5 [10:A.ft12cemi/Conn 0.013] Started Layer 4 [10:A.ft12cemi/Conn 0.013] R state: started Layer 6 [ 1:main 0.013] SN: send_more set Layer 3 [ 5:server/Server 0.013] Start: cfg:server Layer 8 [ 5:server/Server 0.013] Open Layer 0 [ 5:server/Server 0.013] Open Layer 0 [ 5:server/Server 0.013] Openend Layer 8 [16:router/driver 0.013] OpenD Layer 8 [16:router/driver 0.014] OpenedD Layer 3 [15:router/ConnC 0.014] registerLink: router_15 Layer 3 [15:router/ConnC 0.014] Start: cfg:router Layer 5 [15:router/ConnC 0.014] Starting Layer 5 [15:router/ConnC 0.014] Started Layer 4 [15:router/ConnC 0.014] R state: started Layer 6 [ 1:main 0.014] SN: send_more set Layer 8 [ 5:server/Server 0.014] Opened Layer 5 [ 5:server/Server 0.014] Started Layer 4 [ 5:server/Server 0.014] R state: started Layer 6 [ 1:main 0.014] SN: send_more set Layer 4 [ 1:main 0.014] R state: going up triggered Layer 4 [ 1:main 0.014] R state: check start Layer 4 [ 1:main 0.014] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 3 down 0 Layer 0 [ 4:log/main 0.014] State started Layer 4 [ 1:main 0.014] R state: all drivers up Layer 4 [ 1:main 0.014] R state: up Layer 0 [13:A.ft12cemi/ft12ser 0.029] Read(008): 68 08 08 68 F3 F5 00 08 Layer 0 [13:A.ft12cemi/ft12ser 0.035] Read(006): 01 34 10 01 36 16 Layer 0 [13:A.ft12cemi/ft12ser 0.035] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 0.035] RecvEMI(007): F5 00 08 01 34 10 01 Layer 2 [14:A.ft12cemi/ft12cemi 0.035] unknown data Layer 0 [ 5:server/Server 16.920] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 80 Layer 0 [ 4:log/main 16.921] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_CONNECT_REQ Layer 0 [ 4:log/main 16.921] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 0 [12:log/A.ft12cemi 16.921] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 16.921] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 16.921] Send(010): 29 00 B0 50 11 01 11 0A 00 80 Layer 0 [12:log/A.ft12cemi 16.921] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 16.921] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 16.921] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 16.921] Send(010): 11 00 B0 50 11 01 11 0A 00 80 Layer 6 [10:A.ft12cemi/Conn 16.921] SN: still waiting Layer 6 [ 1:main 16.921] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 16.921] Send(017): 68 0B 0B 68 53 11 00 B0 50 11 01 11 0A 00 80 11 16 Layer 0 [ 5:server/Server 16.921] Send(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 0A 00 80 Layer 0 [ 5:server/Server 16.921] Dropped(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 0A 00 80 Layer 0 [13:A.ft12cemi/ft12ser 16.933] Read(001): E5 Layer 0 [ 5:server/Server 16.943] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 16.943] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 6 [ 1:main 16.943] SN: wait L Layer 0 [ 5:server/Server 16.965] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 11 01 00 00 01 01 00 Layer 0 [ 4:log/main 16.965] Recv L_Data system from 1.1.1 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 6 [ 1:main 16.965] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 16.977] Read(008): 68 0B 0B 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 16.981] Read(008): 50 11 01 11 0A 00 80 AE Layer 0 [13:A.ft12cemi/ft12ser 16.983] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 16.983] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 16.983] RecvEMI(010): 2E 00 B0 50 11 01 11 0A 00 80 Layer 2 [14:A.ft12cemi/ft12cemi 16.984] Confirmed Layer 0 [12:log/A.ft12cemi 16.984] send next Layer 6 [ 1:main 16.984] SN: OK Layer 0 [ 4:log/main 16.984] send next Layer 6 [ 2:main/L 16.984] SN: OK L Layer 0 [ 4:log/main 16.984] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 16.984] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 16.984] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 16.984] Send(011): 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [12:log/A.ft12cemi 16.984] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 16.984] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 16.984] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 16.984] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 16.984] SN: still waiting Layer 6 [ 1:main 16.984] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 16.984] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [ 5:server/Server 16.984] Send(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [ 5:server/Server 16.984] Dropped(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 16.997] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 17.041] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 17.045] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 17.048] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 17.048] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 17.048] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 17.048] Confirmed Layer 0 [12:log/A.ft12cemi 17.048] send next Layer 6 [ 1:main 17.048] SN: OK Layer 0 [ 4:log/main 17.048] send next Layer 6 [ 2:main/L 17.048] SN: OK L Layer 0 [ 4:log/main 17.048] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [ 5:server/Server 17.048] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [12:log/A.ft12cemi 17.048] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 17.048] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 17.048] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [13:A.ft12cemi/ft12ser 17.048] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00 Layer 6 [10:A.ft12cemi/Conn 17.049] SN: still waiting Layer 6 [ 1:main 17.049] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 17.049] Send(018): 68 0C 0C 68 53 11 00 B0 D0 11 01 00 00 01 01 00 F8 16 Layer 0 [ 5:server/Server 17.049] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [ 5:server/Server 17.049] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 17.061] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 17.145] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 17.149] Read(008): D0 11 01 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 17.152] Read(002): 95 16 Layer 0 [13:A.ft12cemi/ft12ser 17.152] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 17.152] RecvEMI(011): 2E 00 B0 D0 11 01 00 00 01 01 00 Layer 2 [14:A.ft12cemi/ft12cemi 17.152] Confirmed Layer 0 [12:log/A.ft12cemi 17.152] send next Layer 6 [ 1:main 17.152] SN: OK Layer 0 [ 4:log/main 17.152] send next Layer 6 [ 2:main/L 17.152] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 17.229] Read(008): 68 0C 0C 68 F3 29 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 17.233] Read(008): E0 11 0A 00 00 01 01 40 Layer 0 [13:A.ft12cemi/ft12ser 17.236] Read(002): 09 16 Layer 0 [13:A.ft12cemi/ft12ser 17.236] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 17.236] RecvEMI(011): 29 00 B0 E0 11 0A 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 17.236] Recv L_Data system from 1.1.10 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [12:log/A.ft12cemi 17.236] Has Addr 1.1.10: no Layer 8 [ 1:main 17.236] unknown addr 1.1.10 Layer 0 [12:log/A.ft12cemi 17.236] Add Addr 1.1.10 Layer 0 [ 4:log/main 17.236] Recv L_Data system from 1.1.10 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [ 4:log/main 17.236] Send L_Data system from 1.1.10 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 1 [ 5:server/Server 17.236] Send(011): 29 00 B0 D0 11 0A 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 17.236] Has Addr 1.1.10: yes Layer 6 [ 1:main 17.236] SN: OK Layer 0 [ 4:log/main 17.237] send next Layer 6 [ 2:main/L 17.237] SN: OK L Layer 0 [ 5:server/Server 17.237] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 0A 00 00 01 01 40 Layer 0 [ 5:server/Server 17.237] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 0A 00 00 01 01 40 Layer 0 [ 5:server/Server 17.340] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 81 Layer 0 [ 4:log/main 17.340] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DISCONNECT_REQ Layer 0 [ 4:log/main 17.340] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 0 [12:log/A.ft12cemi 17.340] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 17.341] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 17.341] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 17.341] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 17.341] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 17.341] Send(010): 11 00 B0 50 11 01 11 0A 00 81 Layer 6 [10:A.ft12cemi/Conn 17.341] SN: still waiting Layer 6 [ 1:main 17.341] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 17.341] Send(017): 68 0B 0B 68 73 11 00 B0 50 11 01 11 0A 00 81 32 16 Layer 0 [13:A.ft12cemi/ft12ser 17.353] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 17.397] Read(008): 68 0B 0B 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 17.401] Read(008): 50 11 01 11 0A 00 81 AF Layer 0 [13:A.ft12cemi/ft12ser 17.403] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 17.403] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 17.403] RecvEMI(010): 2E 00 B0 50 11 01 11 0A 00 81 Layer 2 [14:A.ft12cemi/ft12cemi 17.403] Confirmed Layer 0 [12:log/A.ft12cemi 17.404] send next Layer 6 [ 1:main 17.404] SN: OK Layer 0 [ 4:log/main 17.404] send next Layer 6 [ 2:main/L 17.404] SN: OK L Layer 0 [ 5:server/Server 19.978] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 80 Layer 0 [ 4:log/main 19.978] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_CONNECT_REQ Layer 0 [ 4:log/main 19.978] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 0 [12:log/A.ft12cemi 19.979] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 19.979] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 19.979] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 19.979] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 19.979] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 19.979] Send(010): 11 00 B0 50 11 01 11 0A 00 80 Layer 6 [10:A.ft12cemi/Conn 19.979] SN: still waiting Layer 6 [ 1:main 19.979] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 19.979] Send(017): 68 0B 0B 68 53 11 00 B0 50 11 01 11 0A 00 80 11 16 Layer 0 [ 5:server/Server 19.981] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 19.981] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 6 [ 1:main 19.981] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 19.991] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 20.032] Read(008): 68 0B 0B 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 20.037] Read(008): 50 11 01 11 0A 00 80 CE Layer 0 [13:A.ft12cemi/ft12ser 20.039] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 20.039] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 20.039] RecvEMI(010): 2E 00 B0 50 11 01 11 0A 00 80 Layer 2 [14:A.ft12cemi/ft12cemi 20.039] Confirmed Layer 0 [12:log/A.ft12cemi 20.039] send next Layer 6 [ 1:main 20.039] SN: OK Layer 0 [ 4:log/main 20.039] send next Layer 6 [ 2:main/L 20.039] SN: OK L Layer 0 [ 4:log/main 20.040] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 20.040] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 20.040] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 20.040] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 20.040] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 20.040] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 20.040] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 20.040] SN: still waiting Layer 6 [ 1:main 20.040] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 20.040] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [13:A.ft12cemi/ft12ser 20.052] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 20.096] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 20.101] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 20.104] Read(002): 72 16 Layer 0 [13:A.ft12cemi/ft12ser 20.104] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 20.104] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 20.104] Confirmed Layer 0 [12:log/A.ft12cemi 20.104] send next Layer 6 [ 1:main 20.104] SN: OK Layer 0 [ 4:log/main 20.104] send next Layer 6 [ 2:main/L 20.104] SN: OK L Layer 0 [ 5:server/Server 22.969] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 22.970] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 22.970] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 22.970] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 22.970] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 22.970] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 22.970] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 22.970] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 22.970] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 22.970] SN: still waiting Layer 6 [ 1:main 22.970] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 22.970] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 0A 01 43 00 D5 16 Layer 0 [13:A.ft12cemi/ft12ser 22.983] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 23.024] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 23.029] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 23.032] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 23.032] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 23.032] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 23.032] Confirmed Layer 0 [12:log/A.ft12cemi 23.032] send next Layer 6 [ 1:main 23.032] SN: OK Layer 0 [ 4:log/main 23.032] send next Layer 6 [ 2:main/L 23.032] SN: OK L Layer 0 [ 5:server/Server 25.982] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 25.982] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 25.982] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 25.983] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 25.983] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 25.983] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 25.983] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 25.983] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 25.983] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 25.983] SN: still waiting Layer 6 [ 1:main 25.983] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 25.983] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [13:A.ft12cemi/ft12ser 25.995] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 26.055] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 26.060] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 26.062] Read(002): 72 16 Layer 0 [13:A.ft12cemi/ft12ser 26.062] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 26.063] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 26.063] Confirmed Layer 0 [12:log/A.ft12cemi 26.063] send next Layer 6 [ 1:main 26.063] SN: OK Layer 0 [ 4:log/main 26.063] send next Layer 6 [ 2:main/L 26.063] SN: OK L Layer 0 [ 5:server/Server 28.983] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 28.983] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 28.983] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 28.983] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 28.983] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 28.983] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 28.983] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 28.983] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 28.983] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 28.983] SN: still waiting Layer 6 [ 1:main 28.983] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 28.983] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 0A 01 43 00 D5 16 Layer 0 [13:A.ft12cemi/ft12ser 28.996] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 29.056] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 29.060] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 29.063] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 29.063] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 29.063] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 29.063] Confirmed Layer 0 [12:log/A.ft12cemi 29.063] send next Layer 6 [ 1:main 29.063] SN: OK Layer 0 [ 4:log/main 29.063] send next Layer 6 [ 2:main/L 29.064] SN: OK L Layer 0 [ 5:server/Server 31.997] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 81 Layer 0 [ 4:log/main 31.997] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DISCONNECT_REQ Layer 0 [ 4:log/main 31.998] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 0 [12:log/A.ft12cemi 31.998] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 31.998] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 31.998] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 31.999] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 31.999] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 31.999] Send(010): 11 00 B0 50 11 01 11 0A 00 81 Layer 6 [10:A.ft12cemi/Conn 32.000] SN: still waiting Layer 6 [ 1:main 32.000] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 32.000] Send(017): 68 0B 0B 68 73 11 00 B0 50 11 01 11 0A 00 81 32 16 Layer 0 [13:A.ft12cemi/ft12ser 32.012] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 32.077] Read(008): 68 0B 0B 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 32.081] Read(008): 50 11 01 11 0A 00 81 AF Layer 0 [13:A.ft12cemi/ft12ser 32.084] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 32.084] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 32.084] RecvEMI(010): 2E 00 B0 50 11 01 11 0A 00 81 Layer 2 [14:A.ft12cemi/ft12cemi 32.085] Confirmed Layer 0 [12:log/A.ft12cemi 32.085] send next Layer 6 [ 1:main 32.085] SN: OK Layer 0 [ 4:log/main 32.085] send next Layer 6 [ 2:main/L 32.086] SN: OK L Layer 0 [ 5:server/Server 32.531] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 80 Layer 0 [ 4:log/main 32.531] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_CONNECT_REQ Layer 0 [ 4:log/main 32.531] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 0 [12:log/A.ft12cemi 32.531] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 32.531] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 32.531] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 32.531] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 32.531] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 32.531] Send(010): 11 00 B0 50 11 01 11 0A 00 80 Layer 6 [10:A.ft12cemi/Conn 32.531] SN: still waiting Layer 6 [ 1:main 32.531] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 32.531] Send(017): 68 0B 0B 68 53 11 00 B0 50 11 01 11 0A 00 80 11 16 Layer 0 [ 5:server/Server 32.537] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 32.537] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 6 [ 1:main 32.537] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 32.543] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 32.585] Read(008): 68 0B 0B 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 32.589] Read(008): 50 11 01 11 0A 00 80 CE Layer 0 [13:A.ft12cemi/ft12ser 32.592] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 32.592] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 32.592] RecvEMI(010): 2E 00 B0 50 11 01 11 0A 00 80 Layer 2 [14:A.ft12cemi/ft12cemi 32.592] Confirmed Layer 0 [12:log/A.ft12cemi 32.592] send next Layer 6 [ 1:main 32.592] SN: OK Layer 0 [ 4:log/main 32.592] send next Layer 6 [ 2:main/L 32.592] SN: OK L Layer 0 [ 4:log/main 32.592] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 32.592] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 32.592] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 32.592] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 32.592] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 32.592] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 32.592] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 32.592] SN: still waiting Layer 6 [ 1:main 32.592] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 32.592] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [13:A.ft12cemi/ft12ser 32.605] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 32.649] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 32.653] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 32.656] Read(002): 72 16 Layer 0 [13:A.ft12cemi/ft12ser 32.656] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 32.656] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 32.656] Confirmed Layer 0 [12:log/A.ft12cemi 32.656] send next Layer 6 [ 1:main 32.656] SN: OK Layer 0 [ 4:log/main 32.656] send next Layer 6 [ 2:main/L 32.656] SN: OK L Layer 0 [ 5:server/Server 35.609] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 35.609] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 35.609] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 35.609] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 35.609] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 35.609] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 35.609] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 35.609] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 35.609] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 35.609] SN: still waiting Layer 6 [ 1:main 35.609] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 35.609] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 0A 01 43 00 D5 16 Layer 0 [13:A.ft12cemi/ft12ser 35.622] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 35.664] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 35.669] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 35.672] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 35.672] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 35.672] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 35.672] Confirmed Layer 0 [12:log/A.ft12cemi 35.672] send next Layer 6 [ 1:main 35.672] SN: OK Layer 0 [ 4:log/main 35.672] send next Layer 6 [ 2:main/L 35.672] SN: OK L Layer 0 [ 5:server/Server 38.547] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 38.547] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 38.547] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 38.547] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 38.547] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 38.547] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 38.547] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 38.547] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 38.547] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 38.547] SN: still waiting Layer 6 [ 1:main 38.547] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 38.547] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [13:A.ft12cemi/ft12ser 38.560] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 38.600] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 38.605] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 38.608] Read(002): 72 16 Layer 0 [13:A.ft12cemi/ft12ser 38.608] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 38.608] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 38.608] Confirmed Layer 0 [12:log/A.ft12cemi 38.608] send next Layer 6 [ 1:main 38.608] SN: OK Layer 0 [ 4:log/main 38.608] send next Layer 6 [ 2:main/L 38.608] SN: OK L Layer 0 [ 5:server/Server 41.547] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 41.547] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 41.547] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 41.547] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 41.547] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 41.547] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 41.547] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 41.547] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 41.547] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 41.548] SN: still waiting Layer 6 [ 1:main 41.548] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 41.548] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 0A 01 43 00 D5 16 Layer 0 [13:A.ft12cemi/ft12ser 41.560] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 41.601] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 41.606] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 41.609] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 41.609] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 41.609] RecvEMI(011): 2E 00 B0 50 11 01 11 0A 01 43 00 Layer 2 [14:A.ft12cemi/ft12cemi 41.609] Confirmed Layer 0 [12:log/A.ft12cemi 41.609] send next Layer 6 [ 1:main 41.609] SN: OK Layer 0 [ 4:log/main 41.609] send next Layer 6 [ 2:main/L 41.609] SN: OK L Layer 0 [ 5:server/Server 44.546] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 81 Layer 0 [ 4:log/main 44.546] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DISCONNECT_REQ Layer 0 [ 4:log/main 44.546] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 0 [12:log/A.ft12cemi 44.546] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 44.546] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 44.546] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 44.546] Has Addr 1.1.10: yes Layer 0 [12:log/A.ft12cemi 44.546] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 44.546] Send(010): 11 00 B0 50 11 01 11 0A 00 81 Layer 6 [10:A.ft12cemi/Conn 44.546] SN: still waiting Layer 6 [ 1:main 44.546] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 44.546] Send(017): 68 0B 0B 68 73 11 00 B0 50 11 01 11 0A 00 81 32 16 Layer 0 [13:A.ft12cemi/ft12ser 44.558] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 44.601] Read(008): 68 0B 0B 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 44.606] Read(008): 50 11 01 11 0A 00 81 AF Layer 0 [13:A.ft12cemi/ft12ser 44.608] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 44.608] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 44.608] RecvEMI(010): 2E 00 B0 50 11 01 11 0A 00 81 Layer 2 [14:A.ft12cemi/ft12cemi 44.608] Confirmed Layer 0 [12:log/A.ft12cemi 44.608] send next Layer 6 [ 1:main 44.608] SN: OK Layer 0 [ 4:log/main 44.608] send next Layer 6 [ 2:main/L 44.608] SN: OK L
Appl. Programm Programmieren mit ETS: (Fehler Gerät antwortet nicht)Code:Adresse 1.1.11 schreiben mit Weinzierl Tool Net´n Node root@raspberrypi:~# knxd test Layer 4 [ 1:main 0.000] R state: initialized [ 1:main] I00000000: 0.14.2:949290a: knxd test Layer 4 [ 1:main 0.000] R state: setting up Layer 0 [ 4:log/main 0.000] State setup Layer 6 [ 1:main 0.000] SN: OK Layer 0 [ 4:log/main 0.000] send next Layer 6 [ 2:main/L 0.000] SN: OK L Layer 6 [ 1:main 0.001] SN: send_more set Layer 3 [ 5:server/Server 0.001] registerLink: server Layer 0 [12:log/A.ft12cemi 0.001] State setup Layer 3 [10:A.ft12cemi/Conn 0.001] registerLink: A.ft12cemi [ 1:main] I00000055: Connected: cfg:A.ft12cemi. [ 1:main] I00000055: Connected: cfg:server. Layer 4 [ 1:main 0.001] R state: setup OK [ 1:main] W00000020: knxd should not run as root Layer 4 [ 1:main 0.001] R state: trigger going up Layer 0 [ 4:log/main 0.001] State start Layer 3 [10:A.ft12cemi/Conn 0.001] Start: cfg:A.ft12cemi Layer 5 [10:A.ft12cemi/Conn 0.001] Starting Layer 0 [12:log/A.ft12cemi 0.001] State start Layer 1 [13:A.ft12cemi/ft12ser 0.001] Open Layer 1 [13:A.ft12cemi/ft12ser 0.002] Opened Layer 0 [12:log/A.ft12cemi 0.002] send next Layer 6 [ 1:main 0.002] SN: send_more set Layer 2 [14:A.ft12cemi/ft12cemi 0.002] OpenL2 Layer 1 [13:A.ft12cemi/ft12ser 0.002] Send(008): F6 00 08 01 34 10 01 00 Layer 0 [13:A.ft12cemi/ft12ser 0.002] Send(015): 68 09 09 68 73 F6 00 08 01 34 10 01 00 B7 16 Layer 0 [13:A.ft12cemi/ft12ser 0.013] Read(001): E5 Layer 0 [12:log/A.ft12cemi 0.013] State started Layer 5 [10:A.ft12cemi/Conn 0.013] Started Layer 4 [10:A.ft12cemi/Conn 0.013] R state: started Layer 6 [ 1:main 0.013] SN: send_more set Layer 3 [ 5:server/Server 0.013] Start: cfg:server Layer 8 [ 5:server/Server 0.013] Open Layer 0 [ 5:server/Server 0.013] Open Layer 0 [ 5:server/Server 0.013] Openend Layer 8 [16:router/driver 0.013] OpenD Layer 8 [16:router/driver 0.014] OpenedD Layer 3 [15:router/ConnC 0.014] registerLink: router_15 Layer 3 [15:router/ConnC 0.014] Start: cfg:router Layer 5 [15:router/ConnC 0.014] Starting Layer 5 [15:router/ConnC 0.014] Started Layer 4 [15:router/ConnC 0.014] R state: started Layer 6 [ 1:main 0.014] SN: send_more set Layer 8 [ 5:server/Server 0.014] Opened Layer 5 [ 5:server/Server 0.014] Started Layer 4 [ 5:server/Server 0.014] R state: started Layer 6 [ 1:main 0.014] SN: send_more set Layer 4 [ 1:main 0.014] R state: going up triggered Layer 4 [ 1:main 0.014] R state: check start Layer 4 [ 1:main 0.014] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 3 down 0 Layer 0 [ 4:log/main 0.014] State started Layer 4 [ 1:main 0.014] R state: all drivers up Layer 4 [ 1:main 0.014] R state: up Layer 0 [13:A.ft12cemi/ft12ser 0.030] Read(008): 68 08 08 68 F3 F5 00 08 Layer 0 [13:A.ft12cemi/ft12ser 0.035] Read(006): 01 34 10 01 36 16 Layer 0 [13:A.ft12cemi/ft12ser 0.035] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 0.035] RecvEMI(007): F5 00 08 01 34 10 01 Layer 2 [14:A.ft12cemi/ft12cemi 0.035] unknown data Layer 0 [ 5:server/Server 54.153] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 FF 12 00 00 01 01 00 Layer 0 [12:log/A.ft12cemi 54.154] Has Addr 15.15.18: no Layer 8 [ 1:main 54.154] unknown addr 15.15.18 Layer 0 [ 4:log/main 54.154] Recv L_Data system from 15.15.18 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 0 [ 4:log/main 54.154] Send L_Data system from 15.15.18 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 0 [12:log/A.ft12cemi 54.154] Has Addr 15.15.18: no Layer 0 [12:log/A.ft12cemi 54.154] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 54.154] Send L_Data system from 15.15.18 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [13:A.ft12cemi/ft12ser 54.154] Send(011): 11 00 B0 D0 FF 12 00 00 01 01 00 Layer 6 [10:A.ft12cemi/Conn 54.154] SN: still waiting Layer 6 [ 1:main 54.154] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 54.154] Send(018): 68 0C 0C 68 53 11 00 B0 D0 FF 12 00 00 01 01 00 F7 16 Layer 0 [13:A.ft12cemi/ft12ser 54.167] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 54.209] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 54.213] Read(008): D0 FF 12 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 54.216] Read(002): 94 16 Layer 0 [13:A.ft12cemi/ft12ser 54.216] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 54.216] RecvEMI(011): 2E 00 B0 D0 FF 12 00 00 01 01 00 Layer 2 [14:A.ft12cemi/ft12cemi 54.216] Confirmed Layer 0 [12:log/A.ft12cemi 54.217] send next Layer 6 [ 1:main 54.217] SN: OK Layer 0 [ 4:log/main 54.217] send next Layer 6 [ 2:main/L 54.217] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 54.229] Read(008): 68 0C 0C 68 F3 29 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 54.233] Read(008): E0 11 0A 00 00 01 01 40 Layer 0 [13:A.ft12cemi/ft12ser 54.236] Read(002): 09 16 Layer 0 [13:A.ft12cemi/ft12ser 54.236] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 54.236] RecvEMI(011): 29 00 B0 E0 11 0A 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 54.237] Recv L_Data system from 1.1.10 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [12:log/A.ft12cemi 54.237] Has Addr 1.1.10: no Layer 8 [ 1:main 54.237] unknown addr 1.1.10 Layer 0 [12:log/A.ft12cemi 54.237] Add Addr 1.1.10 Layer 0 [ 4:log/main 54.237] Recv L_Data system from 1.1.10 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [ 4:log/main 54.237] Send L_Data system from 1.1.10 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 1 [ 5:server/Server 54.237] Send(011): 29 00 B0 D0 11 0A 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 54.237] Has Addr 1.1.10: yes Layer 6 [ 1:main 54.237] SN: OK Layer 0 [ 4:log/main 54.237] send next Layer 6 [ 2:main/L 54.237] SN: OK L Layer 0 [ 5:server/Server 54.237] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 0A 00 00 01 01 40 Layer 0 [ 5:server/Server 54.238] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 0A 00 00 01 01 40 Layer 0 [ 5:server/Server 54.681] Recv(019): 06 10 05 30 00 13 29 00 B0 E0 FF 12 00 00 03 00 C0 11 0B Layer 8 [15:router/ConnC 54.681] found addr 15.15.18 Layer 0 [ 4:log/main 54.681] Recv L_Data system from 15.15.18 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Write 1.1.11 Layer 0 [ 4:log/main 54.681] Send L_Data system from 15.15.18 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Write 1.1.11 Layer 0 [12:log/A.ft12cemi 54.681] Has Addr 15.15.18: no Layer 0 [12:log/A.ft12cemi 54.681] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 54.681] Send L_Data system from 15.15.18 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Write 1.1.11 Layer 1 [13:A.ft12cemi/ft12ser 54.681] Send(013): 11 00 B0 D0 FF 12 00 00 03 00 C0 11 0B Layer 6 [10:A.ft12cemi/Conn 54.681] SN: still waiting Layer 6 [ 1:main 54.682] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 54.682] Send(020): 68 0E 0E 68 73 11 00 B0 D0 FF 12 00 00 03 00 C0 11 0B F4 16 Layer 0 [13:A.ft12cemi/ft12ser 54.695] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 54.744] Read(008): 68 0E 0E 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 54.748] Read(008): D0 FF 12 00 00 03 00 C0 Layer 0 [13:A.ft12cemi/ft12ser 54.752] Read(004): 11 0B 71 16 Layer 0 [13:A.ft12cemi/ft12ser 54.752] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 54.753] RecvEMI(013): 2E 00 B0 D0 FF 12 00 00 03 00 C0 11 0B Layer 2 [14:A.ft12cemi/ft12cemi 54.753] Confirmed Layer 0 [12:log/A.ft12cemi 54.753] send next Layer 6 [ 1:main 54.753] SN: OK Layer 0 [ 4:log/main 54.753] send next Layer 6 [ 2:main/L 54.753] SN: OK L Layer 0 [ 5:server/Server 54.896] Recv(017): 06 10 05 30 00 11 29 00 B0 E0 FF 12 00 00 01 01 00 Layer 8 [15:router/ConnC 54.896] found addr 15.15.18 Layer 0 [ 4:log/main 54.896] Recv L_Data system from 15.15.18 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 0 [ 4:log/main 54.897] Send L_Data system from 15.15.18 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 0 [12:log/A.ft12cemi 54.897] Has Addr 15.15.18: no Layer 0 [12:log/A.ft12cemi 54.897] Addr Check 0/0/0: yes Layer 0 [12:log/A.ft12cemi 54.897] Send L_Data system from 15.15.18 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [13:A.ft12cemi/ft12ser 54.897] Send(011): 11 00 B0 D0 FF 12 00 00 01 01 00 Layer 6 [10:A.ft12cemi/Conn 54.897] SN: still waiting Layer 6 [ 1:main 54.897] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 54.897] Send(018): 68 0C 0C 68 53 11 00 B0 D0 FF 12 00 00 01 01 00 F7 16 Layer 0 [13:A.ft12cemi/ft12ser 54.910] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 54.951] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 54.955] Read(008): D0 FF 12 00 00 01 01 00 Layer 0 [13:A.ft12cemi/ft12ser 54.958] Read(002): B4 16 Layer 0 [13:A.ft12cemi/ft12ser 54.958] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 54.958] RecvEMI(011): 2E 00 B0 D0 FF 12 00 00 01 01 00 Layer 2 [14:A.ft12cemi/ft12cemi 54.958] Confirmed Layer 0 [12:log/A.ft12cemi 54.958] send next Layer 6 [ 1:main 54.959] SN: OK Layer 0 [ 4:log/main 54.959] send next Layer 6 [ 2:main/L 54.959] SN: OK L Layer 0 [13:A.ft12cemi/ft12ser 54.976] Read(008): 68 0C 0C 68 D3 29 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 54.980] Read(008): E0 11 0B 00 00 01 01 40 Layer 0 [13:A.ft12cemi/ft12ser 54.983] Read(002): EA 16 Layer 0 [13:A.ft12cemi/ft12ser 54.983] Send Ack(001): E5 Layer 1 [14:A.ft12cemi/ft12cemi 54.983] RecvEMI(011): 29 00 B0 E0 11 0B 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 54.983] Recv L_Data system from 1.1.11 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [12:log/A.ft12cemi 54.984] Has Addr 1.1.11: no Layer 8 [ 1:main 54.984] unknown addr 1.1.11 Layer 0 [12:log/A.ft12cemi 54.984] Add Addr 1.1.11 Layer 0 [ 4:log/main 54.984] Recv L_Data system from 1.1.11 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [ 4:log/main 54.984] Send L_Data system from 1.1.11 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 1 [ 5:server/Server 54.984] Send(011): 29 00 B0 D0 11 0B 00 00 01 01 40 Layer 0 [12:log/A.ft12cemi 54.984] Has Addr 1.1.11: yes Layer 6 [ 1:main 54.984] SN: OK Layer 0 [ 4:log/main 54.984] send next Layer 6 [ 2:main/L 54.984] SN: OK L Layer 0 [ 5:server/Server 54.984] Send(017): 06 10 05 30 00 11 29 00 B0 D0 11 0B 00 00 01 01 40 Layer 0 [ 5:server/Server 54.984] Dropped(017): 06 10 05 30 00 11 29 00 B0 D0 11 0B 00 00 01 01 40
Code:knxd test Layer 4 [ 1:main 0.000] R state: initialized [ 1:main] I00000000: 0.14.2:949290a: knxd test Layer 4 [ 1:main 0.000] R state: setting up Layer 0 [ 4:log/main 0.000] State setup Layer 6 [ 1:main 0.000] SN: OK Layer 0 [ 4:log/main 0.000] send next Layer 6 [ 2:main/L 0.000] SN: OK L Layer 6 [ 1:main 0.000] SN: send_more set Layer 3 [ 5:server/Server 0.000] registerLink: server Layer 0 [12:log/A.ft12cemi 0.001] State setup Layer 3 [10:A.ft12cemi/Conn 0.001] registerLink: A.ft12cemi [ 1:main] I00000055: Connected: cfg:A.ft12cemi. [ 1:main] I00000055: Connected: cfg:server. Layer 4 [ 1:main 0.001] R state: setup OK [ 1:main] W00000020: knxd should not run as root Layer 4 [ 1:main 0.001] R state: trigger going up Layer 0 [ 4:log/main 0.001] State start Layer 3 [10:A.ft12cemi/Conn 0.001] Start: cfg:A.ft12cemi Layer 5 [10:A.ft12cemi/Conn 0.001] Starting Layer 0 [12:log/A.ft12cemi 0.001] State start Layer 1 [13:A.ft12cemi/ft12ser 0.001] Open Layer 1 [13:A.ft12cemi/ft12ser 0.002] Opened Layer 0 [12:log/A.ft12cemi 0.002] send next Layer 6 [ 1:main 0.002] SN: send_more set Layer 2 [14:A.ft12cemi/ft12cemi 0.002] OpenL2 Layer 1 [13:A.ft12cemi/ft12ser 0.002] Send(008): F6 00 08 01 34 10 01 00 Layer 0 [13:A.ft12cemi/ft12ser 0.002] Send(015): 68 09 09 68 73 F6 00 08 01 34 10 01 00 B7 16 Layer 0 [13:A.ft12cemi/ft12ser 0.013] Read(001): E5 Layer 0 [12:log/A.ft12cemi 0.013] State started Layer 5 [10:A.ft12cemi/Conn 0.013] Started Layer 4 [10:A.ft12cemi/Conn 0.013] R state: started Layer 6 [ 1:main 0.013] SN: send_more set Layer 3 [ 5:server/Server 0.013] Start: cfg:server Layer 8 [ 5:server/Server 0.013] Open Layer 0 [ 5:server/Server 0.013] Open Layer 0 [ 5:server/Server 0.013] Openend Layer 8 [16:router/driver 0.013] OpenD Layer 8 [16:router/driver 0.014] OpenedD Layer 3 [15:router/ConnC 0.014] registerLink: router_15 Layer 3 [15:router/ConnC 0.014] Start: cfg:router Layer 5 [15:router/ConnC 0.014] Starting Layer 5 [15:router/ConnC 0.014] Started Layer 4 [15:router/ConnC 0.014] R state: started Layer 6 [ 1:main 0.014] SN: send_more set Layer 8 [ 5:server/Server 0.014] Opened Layer 5 [ 5:server/Server 0.014] Started Layer 4 [ 5:server/Server 0.014] R state: started Layer 6 [ 1:main 0.014] SN: send_more set Layer 4 [ 1:main 0.014] R state: going up triggered Layer 4 [ 1:main 0.014] R state: check start Layer 4 [ 1:main 0.014] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 3 down 0 Layer 0 [ 4:log/main 0.014] State started Layer 4 [ 1:main 0.014] R state: all drivers up Layer 4 [ 1:main 0.014] R state: up Layer 0 [13:A.ft12cemi/ft12ser 0.031] Read(008): 68 08 08 68 D3 F5 00 08 Layer 0 [13:A.ft12cemi/ft12ser 0.036] Read(006): 01 34 10 01 16 16 Layer 0 [13:A.ft12cemi/ft12ser 0.036] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 0.036] Sequence jump Layer 0 [ 5:server/Server 10.619] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 80 Layer 0 [ 4:log/main 10.619] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_CONNECT_REQ Layer 0 [ 4:log/main 10.620] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 0 [12:log/A.ft12cemi 10.620] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 10.620] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 10.620] Send(010): 29 00 B0 50 11 01 11 0A 00 80 Layer 0 [12:log/A.ft12cemi 10.620] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 10.620] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 10.620] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 10.620] Send(010): 11 00 B0 50 11 01 11 0A 00 80 Layer 6 [10:A.ft12cemi/Conn 10.620] SN: still waiting Layer 6 [ 1:main 10.620] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 10.620] Send(017): 68 0B 0B 68 53 11 00 B0 50 11 01 11 0A 00 80 11 16 Layer 0 [ 5:server/Server 10.620] Send(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 0A 00 80 Layer 0 [ 5:server/Server 10.621] Dropped(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 0A 00 80 Layer 0 [13:A.ft12cemi/ft12ser 10.632] Read(001): E5 Layer 0 [ 5:server/Server 10.638] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 10.638] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 6 [ 1:main 10.639] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 10.676] Read(008): 68 0B 0B 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 10.680] Read(008): 50 11 01 11 0A 00 80 CE Layer 0 [13:A.ft12cemi/ft12ser 10.683] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 10.683] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 10.683] Sequence jump Layer 1 [14:A.ft12cemi/ft12cemi 10.920] No confirm, continuing Layer 0 [12:log/A.ft12cemi 10.920] send next Layer 6 [ 1:main 10.920] SN: OK Layer 0 [ 4:log/main 10.920] send next Layer 6 [ 2:main/L 10.920] SN: OK L Layer 0 [ 4:log/main 10.920] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 10.920] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 10.920] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 10.920] Send(011): 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [12:log/A.ft12cemi 10.920] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 10.920] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 10.921] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 10.921] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 10.921] SN: still waiting Layer 6 [ 1:main 10.921] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 10.921] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [ 5:server/Server 10.921] Send(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [ 5:server/Server 10.921] Dropped(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 10.933] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 10.978] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 10.982] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 10.985] Read(002): 72 16 Layer 0 [13:A.ft12cemi/ft12ser 10.985] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 10.985] Sequence jump Layer 1 [14:A.ft12cemi/ft12cemi 11.220] No confirm, continuing Layer 0 [12:log/A.ft12cemi 11.220] send next Layer 6 [ 1:main 11.220] SN: OK Layer 0 [ 4:log/main 11.220] send next Layer 6 [ 2:main/L 11.220] SN: OK L Layer 0 [ 5:server/Server 13.653] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 13.653] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 13.653] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 13.653] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 13.654] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 13.654] Send(011): 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [12:log/A.ft12cemi 13.654] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 13.654] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 13.654] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 13.654] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 13.654] SN: still waiting Layer 6 [ 1:main 13.654] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 13.654] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 0A 01 43 00 D5 16 Layer 0 [ 5:server/Server 13.654] Send(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [ 5:server/Server 13.654] Dropped(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 13.667] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 13.710] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 13.715] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 13.718] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 13.718] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 13.718] Sequence jump Layer 1 [14:A.ft12cemi/ft12cemi 13.953] No confirm, continuing Layer 0 [12:log/A.ft12cemi 13.954] send next Layer 6 [ 1:main 13.954] SN: OK Layer 0 [ 4:log/main 13.954] send next Layer 6 [ 2:main/L 13.954] SN: OK L Layer 0 [ 5:server/Server 16.664] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 16.664] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 16.664] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 16.664] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 16.664] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 16.664] Send(011): 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [12:log/A.ft12cemi 16.664] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 16.664] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 16.664] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 16.665] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 16.665] SN: still waiting Layer 6 [ 1:main 16.665] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 16.665] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [ 5:server/Server 16.665] Send(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [ 5:server/Server 16.665] Dropped(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 16.677] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 16.721] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 16.726] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 16.729] Read(002): 72 16 Layer 0 [13:A.ft12cemi/ft12ser 16.729] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 16.729] Sequence jump Layer 1 [14:A.ft12cemi/ft12cemi 16.964] No confirm, continuing Layer 0 [12:log/A.ft12cemi 16.964] send next Layer 6 [ 1:main 16.964] SN: OK Layer 0 [ 4:log/main 16.964] send next Layer 6 [ 2:main/L 16.964] SN: OK L Layer 0 [ 5:server/Server 19.677] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 19.677] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 19.677] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 19.677] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 19.677] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 19.677] Send(011): 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [12:log/A.ft12cemi 19.677] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 19.677] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 19.677] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 19.678] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 19.678] SN: still waiting Layer 6 [ 1:main 19.678] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 19.678] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 0A 01 43 00 D5 16 Layer 0 [ 5:server/Server 19.678] Send(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [ 5:server/Server 19.678] Dropped(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 19.690] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 19.742] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 19.747] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 19.750] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 19.750] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 19.750] Sequence jump Layer 1 [14:A.ft12cemi/ft12cemi 19.977] No confirm, continuing Layer 0 [12:log/A.ft12cemi 19.977] send next Layer 6 [ 1:main 19.977] SN: OK Layer 0 [ 4:log/main 19.977] send next Layer 6 [ 2:main/L 19.977] SN: OK L Layer 0 [ 5:server/Server 22.689] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 81 Layer 0 [ 4:log/main 22.689] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DISCONNECT_REQ Layer 0 [ 4:log/main 22.689] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 0 [12:log/A.ft12cemi 22.689] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 22.689] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 22.689] Send(010): 29 00 B0 50 11 01 11 0A 00 81 Layer 0 [12:log/A.ft12cemi 22.689] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 22.689] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 22.689] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 22.689] Send(010): 11 00 B0 50 11 01 11 0A 00 81 Layer 6 [10:A.ft12cemi/Conn 22.689] SN: still waiting Layer 6 [ 1:main 22.689] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 22.690] Send(017): 68 0B 0B 68 73 11 00 B0 50 11 01 11 0A 00 81 32 16 Layer 0 [ 5:server/Server 22.690] Send(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 0A 00 81 Layer 0 [ 5:server/Server 22.690] Dropped(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 0A 00 81 Layer 0 [13:A.ft12cemi/ft12ser 22.702] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 22.743] Read(008): 68 0B 0B 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 22.748] Read(008): 50 11 01 11 0A 00 81 AF Layer 0 [13:A.ft12cemi/ft12ser 22.750] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 22.750] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 22.750] Sequence jump Layer 1 [14:A.ft12cemi/ft12cemi 22.989] No confirm, continuing Layer 0 [12:log/A.ft12cemi 22.989] send next Layer 6 [ 1:main 22.989] SN: OK Layer 0 [ 4:log/main 22.989] send next Layer 6 [ 2:main/L 22.989] SN: OK L Layer 0 [ 5:server/Server 23.191] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 80 Layer 0 [ 4:log/main 23.191] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_CONNECT_REQ Layer 0 [ 4:log/main 23.191] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 0 [12:log/A.ft12cemi 23.191] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 23.191] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 23.191] Send(010): 29 00 B0 50 11 01 11 0A 00 80 Layer 0 [12:log/A.ft12cemi 23.191] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 23.191] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 23.191] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_CONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 23.191] Send(010): 11 00 B0 50 11 01 11 0A 00 80 Layer 6 [10:A.ft12cemi/Conn 23.191] SN: still waiting Layer 6 [ 1:main 23.191] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 23.191] Send(017): 68 0B 0B 68 53 11 00 B0 50 11 01 11 0A 00 80 11 16 Layer 0 [ 5:server/Server 23.191] Send(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 0A 00 80 Layer 0 [ 5:server/Server 23.192] Dropped(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 0A 00 80 Layer 0 [13:A.ft12cemi/ft12ser 23.203] Read(001): E5 Layer 0 [ 5:server/Server 23.216] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 23.216] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 6 [ 1:main 23.216] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 23.247] Read(008): 68 0B 0B 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 23.252] Read(008): 50 11 01 11 0A 00 80 CE Layer 0 [13:A.ft12cemi/ft12ser 23.254] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 23.254] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 23.254] Sequence jump Layer 1 [14:A.ft12cemi/ft12cemi 23.491] No confirm, continuing Layer 0 [12:log/A.ft12cemi 23.491] send next Layer 6 [ 1:main 23.491] SN: OK Layer 0 [ 4:log/main 23.491] send next Layer 6 [ 2:main/L 23.491] SN: OK L Layer 0 [ 4:log/main 23.491] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 23.491] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 23.491] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 23.491] Send(011): 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [12:log/A.ft12cemi 23.491] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 23.492] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 23.492] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 23.492] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 23.492] SN: still waiting Layer 6 [ 1:main 23.492] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 23.492] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [ 5:server/Server 23.492] Send(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [ 5:server/Server 23.492] Dropped(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 23.504] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 23.549] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 23.554] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 23.556] Read(002): 72 16 Layer 0 [13:A.ft12cemi/ft12ser 23.556] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 23.556] Sequence jump Layer 1 [14:A.ft12cemi/ft12cemi 23.791] No confirm, continuing Layer 0 [12:log/A.ft12cemi 23.791] send next Layer 6 [ 1:main 23.791] SN: OK Layer 0 [ 4:log/main 23.791] send next Layer 6 [ 2:main/L 23.792] SN: OK L Layer 0 [ 5:server/Server 26.222] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 26.222] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 26.222] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 26.222] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 26.222] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 26.222] Send(011): 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [12:log/A.ft12cemi 26.222] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 26.222] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 26.222] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 26.222] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 26.223] SN: still waiting Layer 6 [ 1:main 26.223] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 26.223] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 0A 01 43 00 D5 16 Layer 0 [ 5:server/Server 26.223] Send(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [ 5:server/Server 26.223] Dropped(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 26.235] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 26.278] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 26.282] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 26.285] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 26.285] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 26.285] Sequence jump Layer 1 [14:A.ft12cemi/ft12cemi 26.522] No confirm, continuing Layer 0 [12:log/A.ft12cemi 26.522] send next Layer 6 [ 1:main 26.522] SN: OK Layer 0 [ 4:log/main 26.522] send next Layer 6 [ 2:main/L 26.522] SN: OK L Layer 0 [ 5:server/Server 29.242] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 29.242] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 29.242] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 29.242] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 29.242] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 29.242] Send(011): 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [12:log/A.ft12cemi 29.242] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 29.242] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 29.242] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 29.242] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 29.242] SN: still waiting Layer 6 [ 1:main 29.242] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 29.242] Send(018): 68 0C 0C 68 73 11 00 B0 50 11 01 11 0A 01 43 00 F5 16 Layer 0 [ 5:server/Server 29.242] Send(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [ 5:server/Server 29.242] Dropped(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 29.255] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 29.309] Read(008): 68 0C 0C 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 29.313] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 29.316] Read(002): 72 16 Layer 0 [13:A.ft12cemi/ft12ser 29.316] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 29.316] Sequence jump Layer 1 [14:A.ft12cemi/ft12cemi 29.542] No confirm, continuing Layer 0 [12:log/A.ft12cemi 29.542] send next Layer 6 [ 1:main 29.542] SN: OK Layer 0 [ 4:log/main 29.542] send next Layer 6 [ 2:main/L 29.542] SN: OK L Layer 0 [ 5:server/Server 32.248] Recv(017): 06 10 05 30 00 11 29 00 B0 60 11 01 11 0A 01 43 00 Layer 0 [ 4:log/main 32.248] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [ 4:log/main 32.248] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 0 [12:log/A.ft12cemi 32.248] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 32.248] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 32.248] Send(011): 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [12:log/A.ft12cemi 32.248] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 32.248] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 32.248] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:A.ft12cemi/ft12ser 32.248] Send(011): 11 00 B0 50 11 01 11 0A 01 43 00 Layer 6 [10:A.ft12cemi/Conn 32.248] SN: still waiting Layer 6 [ 1:main 32.248] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 32.248] Send(018): 68 0C 0C 68 53 11 00 B0 50 11 01 11 0A 01 43 00 D5 16 Layer 0 [ 5:server/Server 32.248] Send(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [ 5:server/Server 32.248] Dropped(017): 06 10 05 30 00 11 29 00 B0 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 32.261] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 32.329] Read(008): 68 0C 0C 68 F3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 32.334] Read(008): 50 11 01 11 0A 01 43 00 Layer 0 [13:A.ft12cemi/ft12ser 32.337] Read(002): 92 16 Layer 0 [13:A.ft12cemi/ft12ser 32.337] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 32.337] Sequence jump Layer 1 [14:A.ft12cemi/ft12cemi 32.548] No confirm, continuing Layer 0 [12:log/A.ft12cemi 32.548] send next Layer 6 [ 1:main 32.548] SN: OK Layer 0 [ 4:log/main 32.548] send next Layer 6 [ 2:main/L 32.548] SN: OK L Layer 0 [ 5:server/Server 35.302] Recv(016): 06 10 05 30 00 10 29 00 B0 60 11 01 11 0A 00 81 Layer 0 [ 4:log/main 35.302] Recv L_Data system from 1.1.1 to 1.1.10 hops: 06 T_DISCONNECT_REQ Layer 0 [ 4:log/main 35.302] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 0 [12:log/A.ft12cemi 35.302] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 35.302] Has Addr 1.1.10: no Layer 1 [ 5:server/Server 35.302] Send(010): 29 00 B0 50 11 01 11 0A 00 81 Layer 0 [12:log/A.ft12cemi 35.302] Has Addr 1.1.1: no Layer 0 [12:log/A.ft12cemi 35.302] Addr Check 1.1.10: yes Layer 0 [12:log/A.ft12cemi 35.302] Send L_Data system from 1.1.1 to 1.1.10 hops: 05 T_DISCONNECT_REQ Layer 1 [13:A.ft12cemi/ft12ser 35.302] Send(010): 11 00 B0 50 11 01 11 0A 00 81 Layer 6 [10:A.ft12cemi/Conn 35.302] SN: still waiting Layer 6 [ 1:main 35.302] SN: wait L Layer 0 [13:A.ft12cemi/ft12ser 35.302] Send(017): 68 0B 0B 68 73 11 00 B0 50 11 01 11 0A 00 81 32 16 Layer 0 [ 5:server/Server 35.302] Send(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 0A 00 81 Layer 0 [ 5:server/Server 35.302] Dropped(016): 06 10 05 30 00 10 29 00 B0 50 11 01 11 0A 00 81 Layer 0 [13:A.ft12cemi/ft12ser 35.314] Read(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 35.369] Read(008): 68 0B 0B 68 D3 2E 00 B0 Layer 0 [13:A.ft12cemi/ft12ser 35.374] Read(008): 50 11 01 11 0A 00 81 AF Layer 0 [13:A.ft12cemi/ft12ser 35.376] Read(001): 16 Layer 0 [13:A.ft12cemi/ft12ser 35.376] Send Ack(001): E5 Layer 0 [13:A.ft12cemi/ft12ser 35.376] Sequence jump Layer 1 [14:A.ft12cemi/ft12cemi 35.602] No confirm, continuing Layer 0 [12:log/A.ft12cemi 35.602] send next Layer 6 [ 1:main 35.602] SN: OK Layer 0 [ 4:log/main 35.602] send next Layer 6 [ 2:main/L 35.602] SN: OK L
Zuletzt geändert von jeff25; 21.03.2017, 10:41.Kommentar
-
Habe noch was entdeckt. Dem 838 kann man ja auch eine Phys. Adresse verpassen. Danach macht er auch den Restart des Gerätes wie es sein soll. Dann wollte ich das Appl. Programm drauf machen, er hat auch damit gestartet dann ist wärend des Programmierens der KNXD gestorben mit dieser Meldung:
Layer 0 [ 4:log/main 32.676] Send L_Data system from 1.1.1 to 1.1.3 hops: 05 T_DATA_CONNECTED_REQ serno:01 Unknown APDU: 02 46 A5 2F 46 57 7A 45 6E 09 03 00 FF 00 00 00 00 00 00 00 00 00 00 00 00 01 00 01 60 63 00 14 00 01 60 6B 00 47 00 01 60 73
Layer 0 [12:log/A.ft12cemi 32.676] Has Addr 1.1.1: no
Layer 0 [12:log/A.ft12cemi 32.676] Has Addr 1.1.3: yes
Layer 0 [12:log/A.ft12cemi 32.676] Has Addr 1.1.1: no
Layer 0 [12:log/A.ft12cemi 32.676] Has Addr 1.1.3: yes
Layer 0 [12:log/A.ft12cemi 32.676] Send L_Data system from 1.1.1 to 1.1.3 hops: 05 T_DATA_CONNECTED_REQ serno:01 Unknown APDU: 02 46 A5 2F 46 57 7A 45 6E 09 03 00 FF 00 00 00 00 00 00 00 00 00 00 00 00 01 00 01 60 63 00 14 00 01 60 6B 00 47 00 01 60 73
Layer 1 [13:A.ft12cemi/ft12ser 32.676] Send(050): 11 00 30 50 11 01 11 03 28 46 A5 2F 46 57 7A 45 6E 09 03 00 FF 00 00 00 00 00 00 00 00 00 00 00 00 01 00 01 60 63 00 14 00 01 60 6B 00 47 00 01 60 73
knxd: ft12.cpp:229: virtual void FT12serial::send_Data(CArray&): Assertion `l.size() <= 32' failed.
Aborted
Andere Geräte funktionieren nicht und laufen in den Gerät antwortet nicht Fehler....
Viele Grüße
RobertKommentar
-
Mach den assert in Zeile 229 in src/backend/ft12.cpp weg, der ist Unfug.DistKV, Home Assistant, 1wire, KNX, Python, Asterisk, SMD-LötkolbenKommentar
- Wenn dies dein erster Besuch hier ist, lies bitte zuerst die Hilfe - Häufig gestellte Fragen durch. Du musst dich vermutlich registrieren, bevor du Beiträge verfassen kannst. Klicke oben auf 'Registrieren', um den Registrierungsprozess zu starten. Du kannst auch jetzt schon Beiträge lesen. Suche dir einfach das Forum aus, das dich am meisten interessiert.
Kommentar