Ankündigung

**Smurf** · 23.03.2017, 08:27

Das lässt darauf schließen, dass noch was nicht stimmt. Und dass ich das Log von Anfang an brauche (bitte inkl. -f9 am Anfang).

**jeff25** · 23.03.2017, 08:29

Habe eben mal ein erfolgreiches Schreiben über das Weinzierl Tool mitgeloggt. Vielleicht hilft es ja was bei der Fehlersuche:

Code:

Layer 8 [27:tunnel/1.1.200        26.050] CONNECTIONSTATE_REQUEST on 1
Layer 1 [14:server/Server         26.050] Send(002): 01 00
Layer 8 [27:tunnel/1.1.200        27.253] TUNNEL_REQ
Layer 0 [28:log/tunnel            27.253] Recv L_Data system from 1.1.200 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 8 [26:tunnel/ConnC          27.253] found addr 1.1.200
Layer 1 [14:server/Server         27.253] Send(004): 04 01 03 00
Layer 1 [14:server/Server         27.253] Send(011): 29 00 B0 D0 11 C8 00 00 01 01 00
Layer 0 [11:log/B.ft12cemi        27.253] Send L_Data system from 1.1.200 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 1 [13:B.ft12cemi/ft12cemi   27.253] SendEMI(011): 11 00 B0 D0 11 C8 00 00 01 01 00
Layer 1 [12:B.ft12cemi/ft12ser    27.253] Send(011): 11 00 B0 D0 11 C8 00 00 01 01 00
Layer 6 [ 1:main                  27.253] sending set
Layer 6 [23:router/ConnC          27.253] still waiting
Layer 6 [ 1:main                  27.253] wait L
Layer 1 [14:server/Server         27.253] Send(015): 04 01 06 00 2E 00 B0 E0 00 00 00 00 01 01 00
Layer 8 [27:tunnel/1.1.200        27.261] TUNNEL_ACK
Layer 6 [ 9:B.ft12cemi/Conn       27.270] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   27.317] RecvEMI(011): 2E 00 B0 D0 11 C8 00 00 01 01 00
Layer 2 [13:B.ft12cemi/ft12cemi   27.317] Confirmed
Layer 6 [11:log/B.ft12cemi        27.317] send next
Layer 6 [ 1:main                  27.317] OK
Layer 6 [ 2:main/L                27.317] OK L
Layer 1 [13:B.ft12cemi/ft12cemi   27.342] RecvEMI(011): 29 00 B0 E0 11 08 00 00 01 01 40
Layer 0 [11:log/B.ft12cemi        27.342] Recv L_Data system from 1.1.8 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response
Layer 8 [ 9:B.ft12cemi/Conn       27.342] found addr 1.1.8
Layer 0 [28:log/tunnel            27.343] Send L_Data system from 1.1.8 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response
Layer 1 [14:server/Server         27.343] Send(011): 29 00 B0 D0 11 08 00 00 01 01 40
Layer 6 [ 1:main                  27.343] sending set
Layer 6 [26:tunnel/ConnC          27.343] still waiting
Layer 6 [ 1:main                  27.343] wait L
Layer 1 [14:server/Server         27.343] Send(015): 04 01 07 00 29 00 B0 D0 11 08 00 00 01 01 40
Layer 8 [27:tunnel/1.1.200        27.349] TUNNEL_ACK
Layer 6 [28:log/tunnel            27.349] send next
Layer 6 [23:router/ConnC          27.349] still waiting
Layer 6 [ 1:main                  27.360] OK
Layer 6 [ 2:main/L                27.360] OK L
Layer 8 [27:tunnel/1.1.200        27.790] TUNNEL_REQ
Layer 0 [28:log/tunnel            27.790] Recv L_Data system from 1.1.200 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Write 1.1.8
Layer 8 [26:tunnel/ConnC          27.790] found addr 1.1.200
Layer 1 [14:server/Server         27.790] Send(004): 04 01 04 00
Layer 1 [14:server/Server         27.790] Send(013): 29 00 B0 D0 11 C8 00 00 03 00 C0 11 08
Layer 0 [11:log/B.ft12cemi        27.790] Send L_Data system from 1.1.200 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Write 1.1.8
Layer 1 [13:B.ft12cemi/ft12cemi   27.790] SendEMI(013): 11 00 B0 D0 11 C8 00 00 03 00 C0 11 08
Layer 1 [12:B.ft12cemi/ft12ser    27.790] Send(013): 11 00 B0 D0 11 C8 00 00 03 00 C0 11 08
Layer 6 [ 1:main                  27.790] sending set
Layer 6 [23:router/ConnC          27.790] still waiting
Layer 6 [ 1:main                  27.790] wait L
Layer 1 [14:server/Server         27.790] Send(017): 04 01 08 00 2E 00 B0 E0 00 00 00 00 03 00 C0 11 08
Layer 8 [27:tunnel/1.1.200        27.792] TUNNEL_ACK
Layer 6 [ 9:B.ft12cemi/Conn       27.809] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   27.858] RecvEMI(013): 2E 00 B0 D0 11 C8 00 00 03 00 C0 11 08
Layer 2 [13:B.ft12cemi/ft12cemi   27.859] Confirmed
Layer 6 [11:log/B.ft12cemi        27.859] send next
Layer 6 [ 1:main                  27.859] OK
Layer 6 [ 2:main/L                27.859] OK L
Layer 8 [27:tunnel/1.1.200        28.070] TUNNEL_REQ
Layer 0 [28:log/tunnel            28.070] Recv L_Data system from 1.1.200 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 8 [26:tunnel/ConnC          28.070] found addr 1.1.200
Layer 1 [14:server/Server         28.070] Send(004): 04 01 05 00
Layer 1 [14:server/Server         28.070] Send(011): 29 00 B0 D0 11 C8 00 00 01 01 00
Layer 0 [11:log/B.ft12cemi        28.071] Send L_Data system from 1.1.200 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 1 [13:B.ft12cemi/ft12cemi   28.071] SendEMI(011): 11 00 B0 D0 11 C8 00 00 01 01 00
Layer 1 [12:B.ft12cemi/ft12ser    28.071] Send(011): 11 00 B0 D0 11 C8 00 00 01 01 00
Layer 6 [ 1:main                  28.071] sending set
Layer 6 [23:router/ConnC          28.071] still waiting
Layer 6 [ 1:main                  28.071] wait L
Layer 1 [14:server/Server         28.071] Send(015): 04 01 09 00 2E 00 B0 E0 00 00 00 00 01 01 00
Layer 8 [27:tunnel/1.1.200        28.075] TUNNEL_ACK
Layer 6 [ 9:B.ft12cemi/Conn       28.087] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   28.135] RecvEMI(011): 2E 00 B0 D0 11 C8 00 00 01 01 00
Layer 2 [13:B.ft12cemi/ft12cemi   28.135] Confirmed
Layer 6 [11:log/B.ft12cemi        28.135] send next
Layer 6 [ 1:main                  28.135] OK
Layer 6 [ 2:main/L                28.136] OK L
Layer 1 [13:B.ft12cemi/ft12cemi   28.160] RecvEMI(011): 29 00 B0 E0 11 08 00 00 01 01 40
Layer 0 [11:log/B.ft12cemi        28.160] Recv L_Data system from 1.1.8 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response
Layer 8 [ 9:B.ft12cemi/Conn       28.161] found addr 1.1.8
Layer 0 [28:log/tunnel            28.161] Send L_Data system from 1.1.8 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response
Layer 1 [14:server/Server         28.161] Send(011): 29 00 B0 D0 11 08 00 00 01 01 40
Layer 6 [ 1:main                  28.161] sending set
Layer 6 [26:tunnel/ConnC          28.161] still waiting
Layer 6 [ 1:main                  28.161] wait L
Layer 1 [14:server/Server         28.161] Send(015): 04 01 0A 00 29 00 B0 D0 11 08 00 00 01 01 40
Layer 8 [27:tunnel/1.1.200        28.166] TUNNEL_ACK
Layer 6 [28:log/tunnel            28.166] send next
Layer 6 [23:router/ConnC          28.166] still waiting
Layer 6 [ 1:main                  28.178] OK
Layer 6 [ 2:main/L                28.178] OK L
Layer 8 [27:tunnel/1.1.200        31.050] CONNECTIONSTATE_REQUEST on 1
Layer 1 [14:server/Server         31.050] Send(002): 01 00
Layer 8 [27:tunnel/1.1.200        33.681] DISCONNECT_REQUEST
Layer 8 [27:tunnel/1.1.200        33.681] Stop Conn 1
Layer 3 [ 1:main                  33.681] Release 1.1.200
Layer 0 [28:log/tunnel            33.682] State stopped
Layer 5 [26:tunnel/ConnC          33.682] Stopped
Layer 4 [26:tunnel/ConnC          33.682] R state: stopped
Layer 1 [14:server/Server         33.682] Send(002): 01 00
Layer 4 [ 1:main                  33.682] R state: check start
Layer 4 [ 1:main                  33.682] R state: check end: want_up 1 some 1>1 all 1>1, going 0 up 6 down 0
Layer 3 [26:tunnel/ConnC          33.682] unregisterLink: tunnel_26
Layer 8 [27:tunnel/1.1.200        33.682] CloseS

**jeff25** · 23.03.2017, 08:43

Bitteschön:

knxd -f9 -t 1022 -e 1.1.1 -E 1.1.200:5 -u/tmp/eib -B log -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720

Code:

root@raspberrypi:~# knxd -f9 -t 1022 -e 1.1.1 -E 1.1.200:5 -u/tmp/eib -B log -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720
Layer 4 [ 1:main       0.000] R state: initialized
[ 1:main] I00000000: 0.14.4:c00cd8e: knxd -f9 -t 1022 -e 1.1.1 -E 1.1.200:5 -u/tmp/eib -B log -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720
Layer 4 [ 1:main       0.000] R state: setting up
Layer 4 [ 5:C.cache/G     0.000] GroupCacheInit
Layer 3 [ 4:C.cache/Conn  0.000] registerLink: C.cache
Layer 3 [ 6:A.unix/local   0.000] registerLink: A.unix
Layer 0 [11:log/B.ft12cemi   0.001] State setup
Layer 3 [ 9:B.ft12cemi/Conn       0.001] registerLink: B.ft12cemi
Layer 0 [17:log/tunnel            0.001] State setup
Layer 3 [14:server/Server         0.001] registerLink: server
Layer 3 [20:D.tcp/inet            0.001] registerLink: D.tcp
[ 1:main] I00000055: Connected: cfg:D.tcp.
[ 1:main] I00000055: Connected: cfg:server.
[ 1:main] I00000055: Connected: cfg:B.ft12cemi.
[ 1:main] I00000055: Connected: cfg:A.unix.
[ 1:main] I00000055: Connected: cfg:C.cache.
Layer 4 [ 1:main                  0.001] R state: setup OK
[ 1:main] W00000000: Consider using a config file.
[ 1:main] W00000020: knxd should not run as root
Layer 4 [ 1:main                  0.001] R state: trigger going up
Layer 3 [20:D.tcp/inet            0.001] Start: cfg:D.tcp
Layer 8 [20:D.tcp/inet            0.001] OpenInetSocket 6720
Layer 8 [20:D.tcp/inet            0.002] InetSocket opened
Layer 5 [20:D.tcp/inet            0.002] Started
Layer 4 [20:D.tcp/inet            0.002] R state: started
Layer 6 [ 1:main                  0.002] OK
Layer 6 [ 2:main/L                0.002] OK L
Layer 3 [14:server/Server         0.002] Start: cfg:server
Layer 8 [14:server/Server         0.002] Open
Layer 8 [24:router/driver         0.002] OpenD
Layer 8 [24:router/driver         0.003] OpenedD
[25:router.pace] N00000000: The 'pace' filter without a queue acts globally.
Layer 3 [23:router/ConnC          0.003] registerLink: router_23
Layer 3 [23:router/ConnC          0.003] Start: cfg:router
Layer 5 [23:router/ConnC          0.003] Starting
Layer 5 [23:router/ConnC          0.003] Started
Layer 4 [23:router/ConnC          0.003] R state: started
Layer 6 [ 1:main                  0.003] send_more set
Layer 8 [14:server/Server         0.003] Opened
Layer 5 [14:server/Server         0.003] Started
Layer 4 [14:server/Server         0.003] R state: started
Layer 6 [ 1:main                  0.003] send_more set
Layer 3 [ 9:B.ft12cemi/Conn       0.003] Start: cfg:B.ft12cemi
Layer 5 [ 9:B.ft12cemi/Conn       0.003] Starting
Layer 0 [11:log/B.ft12cemi        0.003] State start
Layer 1 [12:B.ft12cemi/ft12ser    0.003] Open
Layer 1 [12:B.ft12cemi/ft12ser    0.004] Opened
Layer 2 [13:B.ft12cemi/ft12cemi   0.004] OpenL2
Layer 1 [12:B.ft12cemi/ft12ser    0.004] Send(008): F6 00 08 01 34 10 01 00
Layer 4 [ 1:main                  0.004] R state: check start
Layer 4 [ 6:A.unix/local          0.004] is down
Layer 4 [ 4:C.cache/Conn          0.004] is down
Layer 4 [ 1:main                  0.004] R state: check end: want_up 1 some 1>1 all 0>0, going 1 up 3 down 2
Layer 0 [11:log/B.ft12cemi        0.015] State started
Layer 5 [ 9:B.ft12cemi/Conn       0.015] Started
Layer 4 [ 9:B.ft12cemi/Conn       0.015] R state: started
Layer 6 [ 1:main                  0.015] send_more set
Layer 3 [ 6:A.unix/local          0.015] Start: cfg:A.unix
Layer 8 [ 6:A.unix/local          0.015] OpenLocalSocket /tmp/eib
Layer 8 [ 6:A.unix/local          0.015] LocalSocket opened
Layer 5 [ 6:A.unix/local          0.015] Started
Layer 4 [ 6:A.unix/local          0.015] R state: started
Layer 6 [ 1:main                  0.015] send_more set
Layer 3 [ 4:C.cache/Conn          0.015] Start: cfg:C.cache
Layer 5 [ 4:C.cache/Conn          0.015] Starting
Layer 5 [ 4:C.cache/Conn          0.015] Started
Layer 4 [ 4:C.cache/Conn          0.015] R state: started
Layer 6 [ 1:main                  0.015] send_more set
Layer 4 [ 1:main                  0.015] R state: going up triggered
Layer 4 [ 1:main                  0.015] R state: check start
Layer 4 [ 1:main                  0.015] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 6 down 0
Layer 4 [ 1:main                  0.015] R state: all drivers up
Layer 4 [ 1:main                  0.015] R state: up
Layer 1 [14:server/Server         10.189] Send(010): 29 00 B0 50 11 01 11 08 00 80
Layer 0 [11:log/B.ft12cemi        10.189] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_CONNECT_REQ
Layer 1 [13:B.ft12cemi/ft12cemi   10.189] SendEMI(010): 11 00 B0 50 11 01 11 08 00 80
Layer 1 [12:B.ft12cemi/ft12ser    10.189] Send(010): 11 00 B0 50 11 01 11 08 00 80
Layer 6 [23:router/ConnC          10.189] still waiting
Layer 6 [ 1:main                  10.189] wait L
Layer 6 [ 1:main                  10.203] wait L
Layer 6 [ 9:B.ft12cemi/Conn       10.205] still waiting
Layer 6 [ 1:main                  10.221] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   10.489] No confirm, continuing
Layer 6 [11:log/B.ft12cemi        10.489] send next
Layer 6 [ 1:main                  10.489] OK
Layer 6 [ 2:main/L                10.489] OK L
Layer 1 [14:server/Server         10.489] Send(011): 29 00 B0 50 11 01 11 08 01 43 00
Layer 0 [11:log/B.ft12cemi        10.489] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00
Layer 1 [13:B.ft12cemi/ft12cemi   10.489] SendEMI(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 1 [12:B.ft12cemi/ft12ser    10.489] Send(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 6 [23:router/ConnC          10.489] still waiting
Layer 6 [ 1:main                  10.489] wait L
Layer 6 [ 9:B.ft12cemi/Conn       10.506] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   10.789] No confirm, continuing
Layer 6 [11:log/B.ft12cemi        10.789] send next
Layer 6 [ 1:main                  10.789] OK
Layer 6 [ 2:main/L                10.789] OK L
Layer 1 [14:server/Server         10.789] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00
Layer 0 [11:log/B.ft12cemi        10.789] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 1 [13:B.ft12cemi/ft12cemi   10.789] SendEMI(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 1 [12:B.ft12cemi/ft12ser    10.789] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 6 [ 1:main                  10.789] sending set
Layer 6 [23:router/ConnC          10.789] still waiting
Layer 6 [ 1:main                  10.789] wait L
Layer 6 [ 9:B.ft12cemi/Conn       10.806] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   11.089] No confirm, continuing
Layer 6 [11:log/B.ft12cemi        11.089] send next
Layer 6 [ 1:main                  11.089] OK
Layer 6 [ 2:main/L                11.089] OK L
Layer 1 [14:server/Server         13.240] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00
Layer 0 [11:log/B.ft12cemi        13.240] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 1 [13:B.ft12cemi/ft12cemi   13.240] SendEMI(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 1 [12:B.ft12cemi/ft12ser    13.240] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 6 [ 1:main                  13.240] sending set
Layer 6 [23:router/ConnC          13.240] still waiting
Layer 6 [ 1:main                  13.240] wait L
Layer 6 [ 9:B.ft12cemi/Conn       13.257] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   13.540] No confirm, continuing
Layer 6 [11:log/B.ft12cemi        13.540] send next
Layer 6 [ 1:main                  13.540] OK
Layer 6 [ 2:main/L                13.540] OK L
Layer 1 [14:server/Server         16.236] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00
Layer 0 [11:log/B.ft12cemi        16.236] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 1 [13:B.ft12cemi/ft12cemi   16.236] SendEMI(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 1 [12:B.ft12cemi/ft12ser    16.236] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 6 [ 1:main                  16.236] sending set
Layer 6 [23:router/ConnC          16.236] still waiting
Layer 6 [ 1:main                  16.236] wait L
Layer 6 [ 9:B.ft12cemi/Conn       16.253] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   16.536] No confirm, continuing
Layer 6 [11:log/B.ft12cemi        16.536] send next
Layer 6 [ 1:main                  16.536] OK
Layer 6 [ 2:main/L                16.536] OK L
Layer 1 [14:server/Server         19.251] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00
Layer 0 [11:log/B.ft12cemi        19.251] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 1 [13:B.ft12cemi/ft12cemi   19.251] SendEMI(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 1 [12:B.ft12cemi/ft12ser    19.251] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 6 [ 1:main                  19.251] sending set
Layer 6 [23:router/ConnC          19.251] still waiting
Layer 6 [ 1:main                  19.251] wait L
Layer 6 [ 9:B.ft12cemi/Conn       19.268] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   19.551] No confirm, continuing
Layer 6 [11:log/B.ft12cemi        19.551] send next
Layer 6 [ 1:main                  19.551] OK
Layer 6 [ 2:main/L                19.551] OK L
Layer 1 [14:server/Server         22.259] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00
Layer 0 [11:log/B.ft12cemi        22.259] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 1 [13:B.ft12cemi/ft12cemi   22.259] SendEMI(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 1 [12:B.ft12cemi/ft12ser    22.259] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 6 [ 1:main                  22.259] sending set
Layer 6 [23:router/ConnC          22.259] still waiting
Layer 6 [ 1:main                  22.259] wait L
Layer 6 [ 9:B.ft12cemi/Conn       22.276] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   22.559] No confirm, continuing
Layer 6 [11:log/B.ft12cemi        22.559] send next
Layer 6 [ 1:main                  22.559] OK
Layer 6 [ 2:main/L                22.559] OK L
Layer 1 [14:server/Server         25.270] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00
Layer 0 [11:log/B.ft12cemi        25.270] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 1 [13:B.ft12cemi/ft12cemi   25.270] SendEMI(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 1 [12:B.ft12cemi/ft12ser    25.270] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 6 [ 1:main                  25.270] sending set
Layer 6 [23:router/ConnC          25.271] still waiting
Layer 6 [ 1:main                  25.271] wait L
Layer 6 [ 9:B.ft12cemi/Conn       25.287] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   25.570] No confirm, continuing
Layer 6 [11:log/B.ft12cemi        25.570] send next
Layer 6 [ 1:main                  25.570] OK
Layer 6 [ 2:main/L                25.570] OK L
Layer 1 [14:server/Server         28.313] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00
Layer 0 [11:log/B.ft12cemi        28.313] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 1 [13:B.ft12cemi/ft12cemi   28.313] SendEMI(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 1 [12:B.ft12cemi/ft12ser    28.313] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 6 [ 1:main                  28.313] sending set
Layer 6 [23:router/ConnC          28.313] still waiting
Layer 6 [ 1:main                  28.313] wait L
Layer 6 [ 9:B.ft12cemi/Conn       28.330] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   28.613] No confirm, continuing
Layer 6 [11:log/B.ft12cemi        28.613] send next
Layer 6 [ 1:main                  28.613] OK
Layer 6 [ 2:main/L                28.613] OK L
Layer 1 [14:server/Server         31.454] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00
Layer 0 [11:log/B.ft12cemi        31.454] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 1 [13:B.ft12cemi/ft12cemi   31.454] SendEMI(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 1 [12:B.ft12cemi/ft12ser    31.454] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 6 [ 1:main                  31.454] sending set
Layer 6 [23:router/ConnC          31.454] still waiting
Layer 6 [ 1:main                  31.454] wait L
Layer 6 [ 9:B.ft12cemi/Conn       31.471] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   31.754] No confirm, continuing
Layer 6 [11:log/B.ft12cemi        31.754] send next
Layer 6 [ 1:main                  31.754] OK
Layer 6 [ 2:main/L                31.754] OK L

**Smurf** · 23.03.2017, 08:56

Code:

 Layer 1 [13:B.ft12cemi/ft12cemi   10.489] No confirm, continuing

Die Fehlersuche bei diesem Ding ist doch immer wieder faszinierend.

Dein Modul hat sich anscheinend aufgehängt, es antwortet weder auf die Modus-Einstellung noch auf sonstwas.
Ich muss da wohl eine Statusabfrage o.Ä. einbauen, um das dem User direkt zu melden …

Wiederholst du das bitte mal mit -t1023 (vor dem -b ft12cemi, muss nicht das ganze Log vollmüllen)?

**jeff25** · 23.03.2017, 08:57

ich zieh mal den Stecker :-)

**jeff25** · 23.03.2017, 09:00

Code:

root@raspberrypi:~# knxd -f9 -t 1022 -e 1.1.1 -E 1.1.200:5 -u/tmp/eib -B log -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720
Layer 4 [ 1:main       0.000] R state: initialized
[ 1:main] I00000000: 0.14.4:c00cd8e: knxd -f9 -t 1022 -e 1.1.1 -E 1.1.200:5 -u/tmp/eib -B log -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720
Layer 4 [ 1:main       0.001] R state: setting up
Layer 4 [ 5:C.cache/G     0.001] GroupCacheInit
Layer 3 [ 4:C.cache/Conn  0.002] registerLink: C.cache
Layer 3 [ 6:A.unix/local   0.002] registerLink: A.unix
Layer 0 [11:log/B.ft12cemi   0.003] State setup
Layer 3 [ 9:B.ft12cemi/Conn       0.003] registerLink: B.ft12cemi
Layer 0 [17:log/tunnel            0.003] State setup
Layer 3 [14:server/Server         0.004] registerLink: server
Layer 3 [20:D.tcp/inet            0.004] registerLink: D.tcp
[ 1:main] I00000055: Connected: cfg:D.tcp.
[ 1:main] I00000055: Connected: cfg:server.
[ 1:main] I00000055: Connected: cfg:B.ft12cemi.
[ 1:main] I00000055: Connected: cfg:A.unix.
[ 1:main] I00000055: Connected: cfg:C.cache.
Layer 4 [ 1:main                  0.006] R state: setup OK
[ 1:main] W00000000: Consider using a config file.
[ 1:main] W00000020: knxd should not run as root
Layer 4 [ 1:main                  0.007] R state: trigger going up
Layer 3 [20:D.tcp/inet            0.007] Start: cfg:D.tcp
Layer 8 [20:D.tcp/inet            0.007] OpenInetSocket 6720
Layer 8 [20:D.tcp/inet            0.008] InetSocket opened
Layer 5 [20:D.tcp/inet            0.008] Started
Layer 4 [20:D.tcp/inet            0.008] R state: started
Layer 6 [ 1:main                  0.009] OK
Layer 6 [ 2:main/L                0.009] OK L
Layer 3 [14:server/Server         0.009] Start: cfg:server
Layer 8 [14:server/Server         0.009] Open
Layer 8 [24:router/driver         0.010] OpenD
Layer 8 [24:router/driver         0.011] OpenedD
[25:router.pace] N00000000: The 'pace' filter without a queue acts globally.
Layer 3 [23:router/ConnC          0.011] registerLink: router_23
Layer 3 [23:router/ConnC          0.012] Start: cfg:router
Layer 5 [23:router/ConnC          0.012] Starting
Layer 5 [23:router/ConnC          0.012] Started
Layer 4 [23:router/ConnC          0.013] R state: started
Layer 6 [ 1:main                  0.013] send_more set
Layer 8 [14:server/Server         0.013] Opened
Layer 5 [14:server/Server         0.014] Started
Layer 4 [14:server/Server         0.014] R state: started
Layer 6 [ 1:main                  0.014] send_more set
Layer 3 [ 9:B.ft12cemi/Conn       0.015] Start: cfg:B.ft12cemi
Layer 5 [ 9:B.ft12cemi/Conn       0.015] Starting
Layer 0 [11:log/B.ft12cemi        0.015] State start
Layer 1 [12:B.ft12cemi/ft12ser    0.015] Open
Layer 1 [12:B.ft12cemi/ft12ser    0.016] Opened
Layer 2 [13:B.ft12cemi/ft12cemi   0.016] OpenL2
Layer 1 [12:B.ft12cemi/ft12ser    0.017] Send(008): F6 00 08 01 34 10 01 00
Layer 4 [ 1:main                  0.017] R state: check start
Layer 4 [ 6:A.unix/local          0.017] is down
Layer 4 [ 4:C.cache/Conn          0.018] is down
Layer 4 [ 1:main                  0.018] R state: check end: want_up 1 some 1>1 all 0>0, going 1 up 3 down 2
Layer 0 [11:log/B.ft12cemi        0.029] State started
Layer 5 [ 9:B.ft12cemi/Conn       0.030] Started
Layer 4 [ 9:B.ft12cemi/Conn       0.030] R state: started
Layer 6 [ 1:main                  0.030] send_more set
Layer 3 [ 6:A.unix/local          0.031] Start: cfg:A.unix
Layer 8 [ 6:A.unix/local          0.031] OpenLocalSocket /tmp/eib
Layer 8 [ 6:A.unix/local          0.031] LocalSocket opened
Layer 5 [ 6:A.unix/local          0.032] Started
Layer 4 [ 6:A.unix/local          0.032] R state: started
Layer 6 [ 1:main                  0.032] send_more set
Layer 3 [ 4:C.cache/Conn          0.033] Start: cfg:C.cache
Layer 5 [ 4:C.cache/Conn          0.033] Starting
Layer 5 [ 4:C.cache/Conn          0.033] Started
Layer 4 [ 4:C.cache/Conn          0.034] R state: started
Layer 6 [ 1:main                  0.034] send_more set
Layer 4 [ 1:main                  0.034] R state: going up triggered
Layer 4 [ 1:main                  0.035] R state: check start
Layer 4 [ 1:main                  0.035] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 6 down 0
Layer 4 [ 1:main                  0.035] R state: all drivers up
Layer 4 [ 1:main                  0.036] R state: up
Layer 1 [13:B.ft12cemi/ft12cemi   0.053] RecvEMI(007): F5 00 08 01 34 10 01
Layer 2 [13:B.ft12cemi/ft12cemi   0.053] unknown data
Layer 1 [14:server/Server         19.377] Send(010): 29 00 B0 50 11 01 11 08 00 80
Layer 0 [11:log/B.ft12cemi        19.377] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_CONNECT_REQ
Layer 1 [13:B.ft12cemi/ft12cemi   19.378] SendEMI(010): 11 00 B0 50 11 01 11 08 00 80
Layer 1 [12:B.ft12cemi/ft12ser    19.378] Send(010): 11 00 B0 50 11 01 11 08 00 80
Layer 6 [23:router/ConnC          19.378] still waiting
Layer 6 [ 1:main                  19.378] wait L
Layer 6 [ 9:B.ft12cemi/Conn       19.393] still waiting
Layer 6 [ 1:main                  19.400] wait L
Layer 6 [ 1:main                  19.416] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   19.437] RecvEMI(010): 2E 00 B0 50 11 01 11 08 00 80
Layer 2 [13:B.ft12cemi/ft12cemi   19.437] Confirmed
Layer 6 [11:log/B.ft12cemi        19.437] send next
Layer 6 [ 1:main                  19.437] OK
Layer 6 [ 2:main/L                19.437] OK L
Layer 1 [14:server/Server         19.437] Send(011): 29 00 B0 50 11 01 11 08 01 43 00
Layer 0 [11:log/B.ft12cemi        19.437] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00
Layer 1 [13:B.ft12cemi/ft12cemi   19.437] SendEMI(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 1 [12:B.ft12cemi/ft12ser    19.437] Send(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 6 [23:router/ConnC          19.437] still waiting
Layer 6 [ 1:main                  19.437] wait L
Layer 6 [ 9:B.ft12cemi/Conn       19.454] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   19.502] RecvEMI(011): 2E 00 B0 50 11 01 11 08 01 43 00
Layer 2 [13:B.ft12cemi/ft12cemi   19.502] Confirmed
Layer 6 [11:log/B.ft12cemi        19.502] send next
Layer 6 [ 1:main                  19.502] OK
Layer 6 [ 2:main/L                19.502] OK L
Layer 1 [14:server/Server         19.503] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00
Layer 0 [11:log/B.ft12cemi        19.503] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 1 [13:B.ft12cemi/ft12cemi   19.503] SendEMI(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 1 [12:B.ft12cemi/ft12ser    19.503] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00
Layer 6 [ 1:main                  19.503] sending set
Layer 6 [23:router/ConnC          19.503] still waiting
Layer 6 [ 1:main                  19.503] wait L
Layer 6 [ 9:B.ft12cemi/Conn       19.520] still waiting
Layer 1 [13:B.ft12cemi/ft12cemi   19.586] RecvEMI(011): 2E 00 B0 D0 11 01 00 00 01 01 00
Layer 2 [13:B.ft12cemi/ft12cemi   19.586] Confirmed
Layer 6 [11:log/B.ft12cemi        19.586] send next
Layer 6 [ 1:main                  19.586] OK
Layer 6 [ 2:main/L                19.586] OK L
Layer 1 [13:B.ft12cemi/ft12cemi   19.690] RecvEMI(011): 29 00 B0 E0 11 08 00 00 01 01 40
Layer 0 [11:log/B.ft12cemi        19.690] Recv L_Data system from 1.1.8 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response
Layer 8 [ 1:main                  19.690] unknown addr 1.1.8
Layer 1 [14:server/Server         19.691] Send(011): 29 00 B0 D0 11 08 00 00 01 01 40
Layer 6 [ 1:main                  19.691] sending set
Layer 6 [23:router/ConnC          19.691] still waiting
Layer 6 [ 1:main                  19.691] wait L
Layer 6 [ 1:main                  19.708] OK
Layer 6 [ 2:main/L                19.708] OK L
Layer 0 [11:log/B.ft12cemi        19.800] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_DISCONNECT_REQ
Layer 1 [13:B.ft12cemi/ft12cemi   19.800] SendEMI(010): 11 00 B0 50 11 01 11 08 00 81
Layer 1 [12:B.ft12cemi/ft12ser    19.801] Send(010): 11 00 B0 50 11 01 11 08 00 81
Layer 6 [ 9:B.ft12cemi/Conn       19.801] still waiting
Layer 6 [ 1:main                  19.801] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   19.863] RecvEMI(010): 2E 00 B0 50 11 01 11 08 00 81
Layer 2 [13:B.ft12cemi/ft12cemi   19.863] Confirmed
Layer 6 [11:log/B.ft12cemi        19.863] send next
Layer 6 [ 1:main                  19.863] OK
Layer 6 [ 2:main/L                19.863] OK L
Layer 0 [11:log/B.ft12cemi        22.412] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_CONNECT_REQ
Layer 1 [13:B.ft12cemi/ft12cemi   22.412] SendEMI(010): 11 00 B0 50 11 01 11 08 00 80
Layer 1 [12:B.ft12cemi/ft12ser    22.412] Send(010): 11 00 B0 50 11 01 11 08 00 80
Layer 6 [ 9:B.ft12cemi/Conn       22.412] still waiting
Layer 6 [ 1:main                  22.412] wait L
Layer 6 [ 1:main                  22.429] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   22.475] RecvEMI(010): 2E 00 B0 50 11 01 11 08 00 80
Layer 2 [13:B.ft12cemi/ft12cemi   22.475] Confirmed
Layer 6 [11:log/B.ft12cemi        22.475] send next
Layer 6 [ 1:main                  22.475] OK
Layer 6 [ 2:main/L                22.475] OK L
Layer 0 [11:log/B.ft12cemi        22.475] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00
Layer 1 [13:B.ft12cemi/ft12cemi   22.475] SendEMI(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 1 [12:B.ft12cemi/ft12ser    22.475] Send(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 6 [ 9:B.ft12cemi/Conn       22.475] still waiting
Layer 6 [ 1:main                  22.475] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   22.539] RecvEMI(011): 2E 00 B0 50 11 01 11 08 01 43 00
Layer 2 [13:B.ft12cemi/ft12cemi   22.539] Confirmed
Layer 6 [11:log/B.ft12cemi        22.539] send next
Layer 6 [ 1:main                  22.539] OK
Layer 6 [ 2:main/L                22.539] OK L
Layer 0 [11:log/B.ft12cemi        25.433] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00
Layer 1 [13:B.ft12cemi/ft12cemi   25.433] SendEMI(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 1 [12:B.ft12cemi/ft12ser    25.433] Send(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 6 [ 9:B.ft12cemi/Conn       25.433] still waiting
Layer 6 [ 1:main                  25.433] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   25.498] RecvEMI(011): 2E 00 B0 50 11 01 11 08 01 43 00
Layer 2 [13:B.ft12cemi/ft12cemi   25.498] Confirmed
Layer 6 [11:log/B.ft12cemi        25.498] send next
Layer 6 [ 1:main                  25.498] OK
Layer 6 [ 2:main/L                25.498] OK L
Layer 0 [11:log/B.ft12cemi        28.509] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00
Layer 1 [13:B.ft12cemi/ft12cemi   28.509] SendEMI(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 1 [12:B.ft12cemi/ft12ser    28.509] Send(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 6 [ 9:B.ft12cemi/Conn       28.509] still waiting
Layer 6 [ 1:main                  28.509] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   28.590] RecvEMI(011): 2E 00 B0 50 11 01 11 08 01 43 00
Layer 2 [13:B.ft12cemi/ft12cemi   28.590] Confirmed
Layer 6 [11:log/B.ft12cemi        28.590] send next
Layer 6 [ 1:main                  28.590] OK
Layer 6 [ 2:main/L                28.590] OK L
Layer 0 [11:log/B.ft12cemi        31.448] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00
Layer 1 [13:B.ft12cemi/ft12cemi   31.448] SendEMI(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 1 [12:B.ft12cemi/ft12ser    31.448] Send(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 6 [ 9:B.ft12cemi/Conn       31.448] still waiting
Layer 6 [ 1:main                  31.448] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   31.513] RecvEMI(011): 2E 00 B0 50 11 01 11 08 01 43 00
Layer 2 [13:B.ft12cemi/ft12cemi   31.513] Confirmed
Layer 6 [11:log/B.ft12cemi        31.513] send next
Layer 6 [ 1:main                  31.513] OK
Layer 6 [ 2:main/L                31.513] OK L
Layer 0 [11:log/B.ft12cemi        34.459] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_DISCONNECT_REQ
Layer 1 [13:B.ft12cemi/ft12cemi   34.459] SendEMI(010): 11 00 B0 50 11 01 11 08 00 81
Layer 1 [12:B.ft12cemi/ft12ser    34.459] Send(010): 11 00 B0 50 11 01 11 08 00 81
Layer 6 [ 9:B.ft12cemi/Conn       34.459] still waiting
Layer 6 [ 1:main                  34.459] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   34.520] RecvEMI(010): 2E 00 B0 50 11 01 11 08 00 81
Layer 2 [13:B.ft12cemi/ft12cemi   34.520] Confirmed
Layer 6 [11:log/B.ft12cemi        34.520] send next
Layer 6 [ 1:main                  34.520] OK
Layer 6 [ 2:main/L                34.520] OK L
Layer 0 [11:log/B.ft12cemi        34.973] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_CONNECT_REQ
Layer 1 [13:B.ft12cemi/ft12cemi   34.973] SendEMI(010): 11 00 B0 50 11 01 11 08 00 80
Layer 1 [12:B.ft12cemi/ft12ser    34.974] Send(010): 11 00 B0 50 11 01 11 08 00 80
Layer 6 [ 9:B.ft12cemi/Conn       34.974] still waiting
Layer 6 [ 1:main                  34.974] wait L
Layer 6 [ 1:main                  34.990] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   35.035] RecvEMI(010): 2E 00 B0 50 11 01 11 08 00 80
Layer 2 [13:B.ft12cemi/ft12cemi   35.035] Confirmed
Layer 6 [11:log/B.ft12cemi        35.035] send next
Layer 6 [ 1:main                  35.035] OK
Layer 6 [ 2:main/L                35.035] OK L
Layer 0 [11:log/B.ft12cemi        35.035] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00
Layer 1 [13:B.ft12cemi/ft12cemi   35.035] SendEMI(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 1 [12:B.ft12cemi/ft12ser    35.035] Send(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 6 [ 9:B.ft12cemi/Conn       35.035] still waiting
Layer 6 [ 1:main                  35.035] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   35.099] RecvEMI(011): 2E 00 B0 50 11 01 11 08 01 43 00
Layer 2 [13:B.ft12cemi/ft12cemi   35.099] Confirmed
Layer 6 [11:log/B.ft12cemi        35.100] send next
Layer 6 [ 1:main                  35.100] OK
Layer 6 [ 2:main/L                35.100] OK L
Layer 0 [11:log/B.ft12cemi        38.002] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00
Layer 1 [13:B.ft12cemi/ft12cemi   38.002] SendEMI(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 1 [12:B.ft12cemi/ft12ser    38.002] Send(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 6 [ 9:B.ft12cemi/Conn       38.002] still waiting
Layer 6 [ 1:main                  38.002] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   38.067] RecvEMI(011): 2E 00 B0 50 11 01 11 08 01 43 00
Layer 2 [13:B.ft12cemi/ft12cemi   38.067] Confirmed
Layer 6 [11:log/B.ft12cemi        38.067] send next
Layer 6 [ 1:main                  38.067] OK
Layer 6 [ 2:main/L                38.067] OK L
Layer 0 [11:log/B.ft12cemi        41.239] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00
Layer 1 [13:B.ft12cemi/ft12cemi   41.239] SendEMI(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 1 [12:B.ft12cemi/ft12ser    41.239] Send(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 6 [ 9:B.ft12cemi/Conn       41.239] still waiting
Layer 6 [ 1:main                  41.239] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   41.301] RecvEMI(011): 2E 00 B0 50 11 01 11 08 01 43 00
Layer 2 [13:B.ft12cemi/ft12cemi   41.301] Confirmed
Layer 6 [11:log/B.ft12cemi        41.301] send next
Layer 6 [ 1:main                  41.301] OK
Layer 6 [ 2:main/L                41.301] OK L
Layer 0 [11:log/B.ft12cemi        44.017] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00
Layer 1 [13:B.ft12cemi/ft12cemi   44.017] SendEMI(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 1 [12:B.ft12cemi/ft12ser    44.017] Send(011): 11 00 B0 50 11 01 11 08 01 43 00
Layer 6 [ 9:B.ft12cemi/Conn       44.017] still waiting
Layer 6 [ 1:main                  44.017] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   44.080] RecvEMI(011): 2E 00 B0 50 11 01 11 08 01 43 00
Layer 2 [13:B.ft12cemi/ft12cemi   44.080] Confirmed
Layer 6 [11:log/B.ft12cemi        44.080] send next
Layer 6 [ 1:main                  44.080] OK
Layer 6 [ 2:main/L                44.080] OK L
Layer 0 [11:log/B.ft12cemi        47.016] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_DISCONNECT_REQ
Layer 1 [13:B.ft12cemi/ft12cemi   47.017] SendEMI(010): 11 00 B0 50 11 01 11 08 00 81
Layer 1 [12:B.ft12cemi/ft12ser    47.017] Send(010): 11 00 B0 50 11 01 11 08 00 81
Layer 6 [ 9:B.ft12cemi/Conn       47.017] still waiting
Layer 6 [ 1:main                  47.017] wait L
Layer 1 [13:B.ft12cemi/ft12cemi   47.076] RecvEMI(010): 2E 00 B0 50 11 01 11 08 00 81
Layer 2 [13:B.ft12cemi/ft12cemi   47.076] Confirmed
Layer 6 [11:log/B.ft12cemi        47.076] send next
Layer 6 [ 1:main                  47.076] OK
Layer 6 [ 2:main/L                47.076] OK L

**Smurf** · 23.03.2017, 09:03

Das sieht doch schon besser aus.

Jetzt wiederholst du das mal mit "-A address=1.1.111 -B single -b ft12cemi…", wobei du statt 1.1.111 die Adresse des BAOS-Moduls angibst.

**jeff25** · 23.03.2017, 09:08

HUIII WAS DENN DAS:
Layer 2 [14:C.ft12cemi/ft12cemi 0.038] unknown data

Code:

root@raspberrypi:~# knxd -f9 -t 1022 -e 1.1.1 -E 1.1.200:5 -u/tmp/eib -B log -A address=1.1.250 -B single -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720
Layer 4 [ 1:main       0.000] R state: initialized
[ 1:main] I00000000: 0.14.4:c00cd8e: knxd -f9 -t 1022 -e 1.1.1 -E 1.1.200:5 -u/tmp/eib -B log -A address=1.1.250 -B single -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720
Layer 4 [ 1:main       0.000] R state: setting up
Layer 4 [ 5:D.cache/G     0.000] GroupCacheInit
Layer 3 [ 4:D.cache/Conn  0.000] registerLink: D.cache
Layer 3 [ 6:A.unix/local   0.000] registerLink: A.unix
Layer 0 [11:log/C.ft12cemi      0.001] State setup
Layer 3 [ 9:C.ft12cemi/Conn       0.001] registerLink: C.ft12cemi
Layer 0 [18:log/tunnel            0.001] State setup
Layer 3 [15:server/Server         0.001] registerLink: server
Layer 3 [21:E.tcp/inet            0.001] registerLink: E.tcp
[ 1:main] I00000055: Connected: cfg:E.tcp.
[ 1:main] I00000055: Connected: cfg:server.
[ 1:main] I00000055: Connected: cfg:C.ft12cemi.
[ 1:main] I00000055: Connected: cfg:A.unix.
[ 1:main] I00000055: Connected: cfg:D.cache.
Layer 4 [ 1:main                  0.001] R state: setup OK
[ 1:main] W00000000: Consider using a config file.
[ 1:main] W00000020: knxd should not run as root
Layer 4 [ 1:main                  0.002] R state: trigger going up
Layer 3 [21:E.tcp/inet            0.002] Start: cfg:E.tcp
Layer 8 [21:E.tcp/inet            0.002] OpenInetSocket 6720
Layer 8 [21:E.tcp/inet            0.002] InetSocket opened
Layer 5 [21:E.tcp/inet            0.002] Started
Layer 4 [21:E.tcp/inet            0.002] R state: started
Layer 6 [ 1:main                  0.002] OK
Layer 6 [ 2:main/L                0.002] OK L
Layer 3 [15:server/Server         0.002] Start: cfg:server
Layer 8 [15:server/Server         0.002] Open
Layer 8 [25:router/driver         0.002] OpenD
Layer 8 [25:router/driver         0.003] OpenedD
[26:router.pace] N00000000: The 'pace' filter without a queue acts globally.
Layer 3 [24:router/ConnC          0.003] registerLink: router_24
Layer 3 [24:router/ConnC          0.003] Start: cfg:router
Layer 5 [24:router/ConnC          0.003] Starting
Layer 5 [24:router/ConnC          0.003] Started
Layer 4 [24:router/ConnC          0.003] R state: started
Layer 6 [ 1:main                  0.003] send_more set
Layer 8 [15:server/Server         0.003] Opened
Layer 5 [15:server/Server         0.003] Started
Layer 4 [15:server/Server         0.003] R state: started
Layer 6 [ 1:main                  0.003] send_more set
Layer 3 [ 9:C.ft12cemi/Conn       0.003] Start: cfg:C.ft12cemi
Layer 5 [ 9:C.ft12cemi/Conn       0.003] Starting
Layer 0 [11:log/C.ft12cemi        0.003] State start
Layer 1 [13:C.ft12cemi/ft12ser    0.003] Open
Layer 1 [13:C.ft12cemi/ft12ser    0.004] Opened
Layer 2 [14:C.ft12cemi/ft12cemi   0.004] OpenL2
Layer 1 [13:C.ft12cemi/ft12ser    0.004] Send(008): F6 00 08 01 34 10 01 00
Layer 4 [ 1:main                  0.004] R state: check start
Layer 4 [ 6:A.unix/local          0.004] is down
Layer 4 [ 4:D.cache/Conn          0.004] is down
Layer 4 [ 1:main                  0.004] R state: check end: want_up 1 some 1>1 all 0>0, going 1 up 3 down 2
Layer 0 [11:log/C.ft12cemi        0.015] State started
Layer 5 [ 9:C.ft12cemi/Conn       0.015] Started
Layer 4 [ 9:C.ft12cemi/Conn       0.015] R state: started
Layer 6 [ 1:main                  0.015] send_more set
Layer 3 [ 6:A.unix/local          0.015] Start: cfg:A.unix
Layer 8 [ 6:A.unix/local          0.015] OpenLocalSocket /tmp/eib
Layer 8 [ 6:A.unix/local          0.015] LocalSocket opened
Layer 5 [ 6:A.unix/local          0.015] Started
Layer 4 [ 6:A.unix/local          0.015] R state: started
Layer 6 [ 1:main                  0.015] send_more set
Layer 3 [ 4:D.cache/Conn          0.015] Start: cfg:D.cache
Layer 5 [ 4:D.cache/Conn          0.015] Starting
Layer 5 [ 4:D.cache/Conn          0.015] Started
Layer 4 [ 4:D.cache/Conn          0.015] R state: started
Layer 6 [ 1:main                  0.015] send_more set
Layer 4 [ 1:main                  0.015] R state: going up triggered
Layer 4 [ 1:main                  0.016] R state: check start
Layer 4 [ 1:main                  0.016] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 6 down 0
Layer 4 [ 1:main                  0.016] R state: all drivers up
Layer 4 [ 1:main                  0.016] R state: up
Layer 1 [14:C.ft12cemi/ft12cemi   0.038] RecvEMI(007): F5 00 08 01 34 10 01
Layer 2 [14:C.ft12cemi/ft12cemi   0.038] unknown data
Layer 1 [15:server/Server         16.697] Send(010): 29 00 B0 50 11 01 11 08 00 80
Layer 0 [11:log/C.ft12cemi        16.697] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_CONNECT_REQ
Layer 5 [12:B.single/C.ft12cemi   16.697] from 1.1.1 to 1.1.8
Layer 6 [24:router/ConnC          16.697] still waiting
Layer 6 [ 1:main                  16.697] wait L
Layer 6 [ 9:C.ft12cemi/Conn       16.713] still waiting
Layer 6 [ 1:main                  16.716] wait L
Layer 6 [ 1:main                  16.736] wait L
Layer 6 [ 1:main                  19.723] wait L
Layer 6 [ 1:main                  22.726] wait L
Layer 6 [ 1:main                  25.723] wait L
Layer 6 [ 1:main                  28.735] wait L
Layer 6 [ 1:main                  31.741] wait L
Layer 6 [ 1:main                  34.740] wait L
Layer 6 [ 1:main                  37.746] wait L
Layer 6 [ 1:main                  40.844] wait L

Habe es gerade geschafft den KNXD abstürzen zu lassen... (Appl. Programm programmieren)

Code:

Layer 6 [39:tunnel/ConnC          36.072] still waiting
Layer 1 [15:server/Server         36.072] Send(012): 02 00 08 01 C0 A8 03 02 0E 57 02 03
Layer 4 [ 1:main                  36.072] R state: check start
Layer 4 [ 1:main                  36.072] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 6 down 0
Layer 4 [ 1:main                  36.072] R state: up
Layer 0 [44:log/tunnel            36.072] Send L_Data system from 1.1.201 to 1.1.8 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00
Layer 0 [41:log/tunnel            36.072] Send L_Data system from 1.1.201 to 1.1.8 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00
knxd: eibnetserver.cpp:292: virtual void ConnState::send_L_Data(LDataPtr): Assertion `!do_send_next' failed.
Aborted
root@raspberrypi:~#

**Smurf** · 23.03.2017, 09:29

Der Absturz ist natürlich nervig. Ich brauche aber trotzdem mehr Kontext als dreieinviertel Zeilen, d.h. mindestens der vorvorletzte "Send L_Data" sollte mit drauf sein.

**jeff25** · 23.03.2017, 09:31

lässt sich nicht mehr nachstellen. keine Ahnung was das war. Konntest du in dem oberen Log mit -A.... was sehen....?

**Smurf** · 23.03.2017, 09:46

Code:

 
 Layer 1 [14:C.ft12cemi/ft12cemi   0.038] RecvEMI(007): F5 00 08 01 34 10 01

Das findet sich mit Sicherheit in der Doku; muss ich suchen. Jetzt ist aber erstmal "bezahlte" Arbeit angesagt.

**jeff25** · 23.03.2017, 09:59

klar natürlich :-) Ich suche auch mal etwas in der Zwischenzeit....

**jeff25** · 23.03.2017, 10:18

Habe den Fehler weg. Habe das Adresstable auf 0 setzen von gestern wieder eingebaut:

Code:

root@raspberrypi:~/knxd# knxd -f9 -t 1022 -e 1.1.1 -E 1.1.200:5 -u/tmp/eib -B log -A address=1.1.250 -B single -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720
Layer 4 [ 1:main       0.000] R state: initialized
[ 1:main] I00000000: 0.14.4:c00cd8e: knxd -f9 -t 1022 -e 1.1.1 -E 1.1.200:5 -u/tmp/eib -B log -A address=1.1.250 -B single -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720
Layer 4 [ 1:main       0.000] R state: setting up
Layer 4 [ 5:D.cache/G     0.000] GroupCacheInit
Layer 3 [ 4:D.cache/Conn  0.000] registerLink: D.cache
Layer 3 [ 6:A.unix/local   0.000] registerLink: A.unix
Layer 0 [11:log/C.ft12cemi      0.001] State setup
Layer 3 [ 9:C.ft12cemi/Conn       0.001] registerLink: C.ft12cemi
Layer 0 [18:log/tunnel            0.001] State setup
Layer 3 [15:server/Server         0.001] registerLink: server
Layer 3 [21:E.tcp/inet            0.001] registerLink: E.tcp
[ 1:main] I00000055: Connected: cfg:E.tcp.
[ 1:main] I00000055: Connected: cfg:server.
[ 1:main] I00000055: Connected: cfg:C.ft12cemi.
[ 1:main] I00000055: Connected: cfg:A.unix.
[ 1:main] I00000055: Connected: cfg:D.cache.
Layer 4 [ 1:main                  0.001] R state: setup OK
[ 1:main] W00000000: Consider using a config file.
[ 1:main] W00000020: knxd should not run as root
Layer 4 [ 1:main                  0.002] R state: trigger going up
Layer 3 [21:E.tcp/inet            0.002] Start: cfg:E.tcp
Layer 8 [21:E.tcp/inet            0.002] OpenInetSocket 6720
Layer 8 [21:E.tcp/inet            0.002] InetSocket opened
Layer 5 [21:E.tcp/inet            0.002] Started
Layer 4 [21:E.tcp/inet            0.002] R state: started
Layer 6 [ 1:main                  0.002] OK
Layer 6 [ 2:main/L                0.002] OK L
Layer 3 [15:server/Server         0.002] Start: cfg:server
Layer 8 [15:server/Server         0.002] Open
Layer 8 [25:router/driver         0.003] OpenD
Layer 8 [25:router/driver         0.003] OpenedD
[26:router.pace] N00000000: The 'pace' filter without a queue acts globally.
Layer 3 [24:router/ConnC          0.003] registerLink: router_24
Layer 3 [24:router/ConnC          0.004] Start: cfg:router
Layer 5 [24:router/ConnC          0.004] Starting
Layer 5 [24:router/ConnC          0.004] Started
Layer 4 [24:router/ConnC          0.004] R state: started
Layer 6 [ 1:main                  0.004] send_more set
Layer 8 [15:server/Server         0.004] Opened
Layer 5 [15:server/Server         0.004] Started
Layer 4 [15:server/Server         0.004] R state: started
Layer 6 [ 1:main                  0.004] send_more set
Layer 3 [ 9:C.ft12cemi/Conn       0.004] Start: cfg:C.ft12cemi
Layer 5 [ 9:C.ft12cemi/Conn       0.004] Starting
Layer 0 [11:log/C.ft12cemi        0.004] State start
Layer 1 [13:C.ft12cemi/ft12ser    0.004] Open
Layer 1 [13:C.ft12cemi/ft12ser    0.005] Opened
Layer 2 [14:C.ft12cemi/ft12cemi   0.005] OpenL2
Layer 1 [13:C.ft12cemi/ft12ser    0.005] Send(005): A6 01 40 00 00
Layer 4 [ 1:main                  0.005] R state: check start
Layer 4 [ 6:A.unix/local          0.005] is down
Layer 4 [ 4:D.cache/Conn          0.005] is down
Layer 4 [ 1:main                  0.005] R state: check end: want_up 1 some 1>1 all 0>0, going 1 up 3 down 2
Layer 1 [13:C.ft12cemi/ft12ser    0.015] Send(008): F6 00 08 01 34 10 01 00
Layer 0 [11:log/C.ft12cemi        0.026] State started
Layer 5 [ 9:C.ft12cemi/Conn       0.026] Started
Layer 4 [ 9:C.ft12cemi/Conn       0.026] R state: started
Layer 6 [ 1:main                  0.026] send_more set
Layer 3 [ 6:A.unix/local          0.026] Start: cfg:A.unix
Layer 8 [ 6:A.unix/local          0.026] OpenLocalSocket /tmp/eib
Layer 8 [ 6:A.unix/local          0.026] LocalSocket opened
Layer 5 [ 6:A.unix/local          0.026] Started
Layer 4 [ 6:A.unix/local          0.026] R state: started
Layer 6 [ 1:main                  0.026] send_more set
Layer 3 [ 4:D.cache/Conn          0.026] Start: cfg:D.cache
Layer 5 [ 4:D.cache/Conn          0.026] Starting
Layer 5 [ 4:D.cache/Conn          0.026] Started
Layer 4 [ 4:D.cache/Conn          0.026] R state: started
Layer 6 [ 1:main                  0.027] send_more set
Layer 4 [ 1:main                  0.027] R state: going up triggered
Layer 4 [ 1:main                  0.027] R state: check start
Layer 4 [ 1:main                  0.027] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 6 down 0
Layer 4 [ 1:main                  0.027] R state: all drivers up
Layer 4 [ 1:main                  0.027] R state: up
Layer 1 [15:server/Server         9.254] Send(010): 29 00 B0 50 11 01 11 08 00 80
Layer 0 [11:log/C.ft12cemi        9.254] Send L_Data system from 1.1.1 to 1.1.8 hops: 05 T_CONNECT_REQ
Layer 5 [12:B.single/C.ft12cemi   9.254] from 1.1.1 to 1.1.8
Layer 6 [24:router/ConnC          9.254] still waiting
Layer 6 [ 1:main                  9.254] wait L
Layer 6 [ 9:C.ft12cemi/Conn       9.270] still waiting
Layer 6 [ 1:main                  9.274] wait L
Layer 6 [ 1:main                  9.294] wait L
Layer 6 [ 1:main                  12.315] wait L
Layer 6 [ 1:main                  15.275] wait L
Layer 6 [ 1:main                  18.278] wait L
Layer 6 [ 1:main                  21.280] wait L
Layer 6 [ 1:main                  24.347] wait L
Layer 6 [ 1:main                  27.324] wait L
Layer 6 [ 1:main                  30.287] wait L
Layer 6 [ 1:main                  33.294] wait L
Layer 6 [ 1:main                  36.292] wait L
Layer 6 [ 1:main                  39.303] wait L
Layer 6 [ 1:main                  42.310] wait L
Layer 6 [ 1:main                  45.314] wait L
Layer 6 [ 1:main                  48.316] wait L
Layer 6 [ 1:main                  51.319] wait L
Layer 6 [ 1:main                  54.323] wait L
Layer 6 [ 1:main                  57.329] wait L
Layer 6 [ 1:main                  128.903] wait L
Layer 6 [ 1:main                  128.923] wait L
Layer 6 [ 1:main                  131.930] wait L
Layer 6 [ 1:main                  134.942] wait L
Layer 6 [ 1:main                  137.954] wait L
Layer 6 [ 1:main                  140.967] wait L
Layer 6 [ 1:main                  141.470] wait L
Layer 6 [ 1:main                  141.494] wait L
Layer 6 [ 1:main                  144.501] wait L
Layer 6 [ 1:main                  147.630] wait L
Layer 6 [ 1:main                  150.522] wait L
Layer 6 [ 1:main                  153.523] wait L

**Smurf** · 23.03.2017, 10:36

… bitte trotzdem mit -t1023 vor dem -b ft12cemi:. Ohne konkrete Daten kann ich nicht sicher sein, was das Modul tatsächlich tut.

**jeff25** · 23.03.2017, 10:44

Code:

root@raspberrypi:~/knxd# knxd -f9 -t 1022 -e 1.1.1 -E 1.1.200:5 -u/tmp/eib -B log -A address=1.1.250 -B single -t 1023 -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720
Layer 4 [ 1:main       0.000] R state: initialized
[ 1:main] I00000000: 0.14.4:c00cd8e: knxd -f9 -t 1022 -e 1.1.1 -E 1.1.200:5 -u/tmp/eib -B log -A address=1.1.250 -B single -t 1023 -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720
Layer 4 [ 1:main       0.000] R state: setting up
Layer 4 [ 5:D.cache/G     0.000] GroupCacheInit
Layer 3 [ 4:D.cache/Conn  0.000] registerLink: D.cache
Layer 3 [ 6:A.unix/local   0.000] registerLink: A.unix
Layer 0 [11:log/C.ft12cemi      0.001] State setup
Layer 3 [ 9:C.ft12cemi/Conn       0.001] registerLink: C.ft12cemi
Layer 0 [18:log/tunnel            0.001] State setup
Layer 3 [15:server/Server         0.001] registerLink: server
Layer 3 [21:E.tcp/inet            0.001] registerLink: E.tcp
[ 1:main] I00000055: Connected: cfg:E.tcp.
[ 1:main] I00000055: Connected: cfg:server.
[ 1:main] I00000055: Connected: cfg:C.ft12cemi.
[ 1:main] I00000055: Connected: cfg:A.unix.
[ 1:main] I00000055: Connected: cfg:D.cache.
Layer 4 [ 1:main                  0.001] R state: setup OK
[ 1:main] W00000000: Consider using a config file.
[ 1:main] W00000020: knxd should not run as root
Layer 4 [ 1:main                  0.002] R state: trigger going up
Layer 3 [21:E.tcp/inet            0.002] Start: cfg:E.tcp
Layer 8 [21:E.tcp/inet            0.002] OpenInetSocket 6720
Layer 8 [21:E.tcp/inet            0.002] InetSocket opened
Layer 5 [21:E.tcp/inet            0.002] Started
Layer 4 [21:E.tcp/inet            0.002] R state: started
Layer 6 [ 1:main                  0.002] OK
Layer 6 [ 2:main/L                0.002] OK L
Layer 3 [15:server/Server         0.002] Start: cfg:server
Layer 8 [15:server/Server         0.002] Open
Layer 8 [25:router/driver         0.002] OpenD
Layer 8 [25:router/driver         0.003] OpenedD
[26:router.pace] N00000000: The 'pace' filter without a queue acts globally.
Layer 3 [24:router/ConnC          0.003] registerLink: router_24
Layer 3 [24:router/ConnC          0.003] Start: cfg:router
Layer 5 [24:router/ConnC          0.003] Starting
Layer 5 [24:router/ConnC          0.003] Started
Layer 4 [24:router/ConnC          0.003] R state: started
Layer 6 [ 1:main                  0.003] send_more set
Layer 8 [15:server/Server         0.003] Opened
Layer 5 [15:server/Server         0.003] Started
Layer 4 [15:server/Server         0.003] R state: started
Layer 6 [ 1:main                  0.003] send_more set
Layer 3 [ 9:C.ft12cemi/Conn       0.003] Start: cfg:C.ft12cemi
Layer 5 [ 9:C.ft12cemi/Conn       0.003] Starting
Layer 0 [11:log/C.ft12cemi        0.003] State start
Layer 1 [13:C.ft12cemi/ft12ser    0.003] Open
Layer 1 [13:C.ft12cemi/ft12ser    0.004] Opened
Layer 2 [14:C.ft12cemi/ft12cemi   0.004] OpenL2
Layer 1 [13:C.ft12cemi/ft12ser    0.004] Send(005): A6 01 40 00 00
Layer 4 [ 1:main                  0.004] R state: check start
Layer 4 [ 6:A.unix/local          0.004] is down
Layer 4 [ 4:D.cache/Conn          0.004] is down
Layer 4 [ 1:main                  0.004] R state: check end: want_up 1 some 1>1 all 0>0, going 1 up 3 down 2
Layer 0 [13:C.ft12cemi/ft12ser    0.004] Send(012): 68 06 06 68 73 A6 01 40 00 00 5A 16
Layer 0 [13:C.ft12cemi/ft12ser    0.013] Read(001): E5
Layer 1 [13:C.ft12cemi/ft12ser    0.013] Send(008): F6 00 08 01 34 10 01 00
Layer 0 [13:C.ft12cemi/ft12ser    0.013] Send(015): 68 09 09 68 53 F6 00 08 01 34 10 01 00 97 16
Layer 0 [13:C.ft12cemi/ft12ser    0.024] Read(001): E5
Layer 0 [11:log/C.ft12cemi        0.024] State started
Layer 5 [ 9:C.ft12cemi/Conn       0.024] Started
Layer 4 [ 9:C.ft12cemi/Conn       0.024] R state: started
Layer 6 [ 1:main                  0.024] send_more set
Layer 3 [ 6:A.unix/local          0.024] Start: cfg:A.unix
Layer 8 [ 6:A.unix/local          0.024] OpenLocalSocket /tmp/eib
Layer 8 [ 6:A.unix/local          0.024] LocalSocket opened
Layer 5 [ 6:A.unix/local          0.025] Started
Layer 4 [ 6:A.unix/local          0.025] R state: started
Layer 6 [ 1:main                  0.025] send_more set
Layer 3 [ 4:D.cache/Conn          0.025] Start: cfg:D.cache
Layer 5 [ 4:D.cache/Conn          0.025] Starting
Layer 5 [ 4:D.cache/Conn          0.025] Started
Layer 4 [ 4:D.cache/Conn          0.025] R state: started
Layer 6 [ 1:main                  0.025] send_more set
Layer 4 [ 1:main                  0.025] R state: going up triggered
Layer 4 [ 1:main                  0.025] R state: check start
Layer 4 [ 1:main                  0.025] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 6 down 0
Layer 4 [ 1:main                  0.025] R state: all drivers up
Layer 4 [ 1:main                  0.025] R state: up
Layer 0 [13:C.ft12cemi/ft12ser    0.040] Read(008): 68 08 08 68 F3 F5 00 08
Layer 0 [13:C.ft12cemi/ft12ser    0.045] Read(006): 01 34 10 01 36 16
Layer 0 [13:C.ft12cemi/ft12ser    0.045] Send Ack(001): E5
Layer 1 [14:C.ft12cemi/ft12cemi   0.045] RecvEMI(007): F5 00 08 01 34 10 01
Layer 2 [14:C.ft12cemi/ft12cemi   0.045] unknown data
Layer 1 [15:server/Server         0.531] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00
Layer 0 [11:log/C.ft12cemi        0.531] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 6 [ 1:main                  0.531] sending set
Layer 6 [24:router/ConnC          0.531] still waiting
Layer 6 [ 1:main                  0.531] wait L
Layer 6 [ 9:C.ft12cemi/Conn       0.548] still waiting
Layer 6 [ 1:main                  3.534] wait L
Layer 8 [15:server/Server         11.631] DISCONNECT_REQUEST on 1
Layer 1 [15:server/Server         11.631] Send(002): 01 21
Layer 3 [15:server/Server         11.640] Allocate 1.1.200
Layer 8 [15:server/Server         11.640] Tunnel CONNECTION_REQ with 1.1.200
Layer 9 [28:tunnel/1.1.200        11.640] has 1.1.200
Layer 0 [29:log/tunnel            11.640] State setup
Layer 8 [28:tunnel/1.1.200        11.640] Start Conn 1
Layer 3 [27:tunnel/ConnC          11.640] registerLink: tunnel_27
Layer 3 [27:tunnel/ConnC          11.640] Start: cfg:tunnel
Layer 5 [27:tunnel/ConnC          11.640] Starting
Layer 0 [29:log/tunnel            11.640] State start
Layer 0 [29:log/tunnel            11.640] State started
Layer 5 [27:tunnel/ConnC          11.640] Started
Layer 4 [27:tunnel/ConnC          11.640] R state: started
Layer 6 [ 9:C.ft12cemi/Conn       11.640] still waiting
Layer 1 [15:server/Server         11.640] Send(014): 01 00 08 01 C0 A8 03 02 0E 57 04 04 11 C8
Layer 4 [ 1:main                  11.641] R state: check start
Layer 4 [ 1:main                  11.641] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 6 down 0
Layer 4 [ 1:main                  11.641] R state: up
Layer 0 [29:log/tunnel            11.641] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 1 [15:server/Server         11.641] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00
Layer 0 [11:log/C.ft12cemi        11.641] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read
Layer 6 [ 1:main                  11.641] sending set
Layer 6 [27:tunnel/ConnC          11.641] still waiting
Layer 6 [ 1:main                  11.641] wait L
Layer 1 [15:server/Server         11.641] Send(015): 04 01 00 00 29 00 B0 D0 11 01 00 00 01 01 00
Layer 8 [28:tunnel/1.1.200        11.646] CONNECTIONSTATE_REQUEST on 1
Layer 1 [15:server/Server         11.646] Send(002): 01 00
Layer 6 [27:tunnel/ConnC          11.658] still waiting
Layer 1 [15:server/Server         12.642] Send(015): 04 01 00 00 29 00 B0 D0 11 01 00 00 01 01 00
Layer 8 [28:tunnel/1.1.200        12.758] TUNNEL_ACK
Layer 6 [29:log/tunnel            12.758] send next
Layer 6 [ 9:C.ft12cemi/Conn       12.758] still waiting
Layer 6 [ 1:main                  15.318] wait L
Layer 6 [ 1:main                  15.336] wait L
Layer 6 [ 1:main                  15.355] wait L
Layer 6 [ 1:main                  18.332] wait L
Layer 6 [ 1:main                  21.334] wait L
Layer 6 [ 1:main                  24.336] wait L
Layer 6 [ 1:main                  27.344] wait L

Ankündigung

Serverwartung 21.2.

Weinzierl KNX BAOS Module 838 kBerry

Kommentar

Kommentar

Kommentar

Kommentar

Kommentar

Kommentar

Kommentar

Kommentar

Kommentar

Kommentar

Kommentar

Kommentar

Kommentar

Kommentar

Kommentar