… bzw. update auf die aktuelle Version ;-)
-
DistKV, Home Assistant, 1wire, KNX, Python, Asterisk, SMD-Lötkolben -
Ok. Compiliere gerade neu und berichte dann. Hast du in den Logs oben was sehen können?Kommentar
-
ok. Das Weinzierl hat sich nun mit Phys. Adresse und mit dem Appl. Programm programieren lassen. Cool :-) Der ABB Schaltaktor noch nicht, ein Gira Tastsensor auch nicht. Hier programmiert er zwar die Phys. Adresse, sagt aber immer Gerät antwortet nicht wo bei dem Weinzierl der Restart des Gerätes passiert passiert hier nichts....Kommentar
-
So, habe nun den aktuellen Master neu geholt, übersetzt und mit der 838er Karte versucht, mit der ETS bei einen Taster die phys. Adresse zu setzen und die Applikation zu laden, ist leider fehlgeschlagen. knxd-Kommando war
Ich habe alles in ein File geloggt:Code:knxd -t 1022 -e 1.0.1 -E 1.0.200:210 -u/tmp/eib -b ft12cemi:/dev/ttyAMA0 -DTRS -c -i 6720
Zuletzt geändert von ralf9000; 21.03.2017, 19:21.Kommentar
-
Habe es gerade noch mit drei anderen Geräten versucht, er läuft immer in den Timeout. Fehlermeldung: Gerät antwortet nicht in angemessener Zeit.
An was das liegen könnte weis ich auch nicht so recht. Bin nicht so der Programmier Held :-)Kommentar
-
Anscheinend muss ich wirklich einbauen, dass das Logging der tatsächlichen KNX-Daten automatisch eingeschaltet wird, sobald irgendjemand irgendwas loggt. :-/
Mach bitte das stattdessen:
Code:knxd -t 1022 -e 1.0.1 -E 1.0.200:210 -u/tmp/eib -B log -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720
DistKV, Home Assistant, 1wire, KNX, Python, Asterisk, SMD-LötkolbenKommentar
-
-
und nochmal ein Versuch:
Kommentar
-
Kann nicht sein. Da müssen Zeilen in der Form
auftauchen, wenn du tatsächlich das (erste) "-B log"-Argument verwendet hast. Bei mir sieht das so aus:Code:Layer 0 [11:log/B.ft12cemi …
PS: Die Zahl hinter dem Doppelpunkt bei -E gibt die Anzahl der Adressen an, nicht die letzte freie Adresse!Code:# src/server/knxd -t 1022 -e 3.3.3 -E 3.4.5:6 -u/tmp/eib -B log -b ft12cemi:/dev/ttyACM0: -D -B log -TRS -c -i 6720 Layer 4 [ 1:main 0.000] R state: initialized Layer 4 [ 1:main 0.000] R state: setting up Layer 4 [ 5:C.cache/G 0.001] GroupCacheInit Layer 3 [ 4:C.cache/Conn 0.001] registerLink: C.cache Layer 6 [ 1:main 0.001] SN: OK Layer 6 [ 2:main/L 0.002] SN: OK L Layer 3 [ 6:A.unix/local 0.002] registerLink: A.unix Layer 0 [11:log/B.ft12cemi 0.002] State setup Layer 3 [ 9:B.ft12cemi/Conn 0.002] registerLink: B.ft12cemi …
Evtl liegt es daran …DistKV, Home Assistant, 1wire, KNX, Python, Asterisk, SMD-LötkolbenKommentar
-
Ich habe den Befehl mit den "-B log" zweimal genauso eingegeben, wir Du geschrieben hattest. Das mit der Anzahl wusste ich nicht, in der Anleitung ist immer nur von Bereich die Rede und die Beispiele sind bei Niedrigwerten, so dass man es auch nicht dort ablesen kann.Zitat von Smurf Beitrag anzeigen
Werde heute Abend nochmal probieren und dabei dann -E 1.0.200:10 angeben. Bin jetzt auf der Arbeit und kann leider nicht testen. Wird erst wieder was ab 17:00 Uhr.
Grüße, Ralf.Kommentar
-
Hallo Smurf ,
ich habe noch etwas rumgetestet. Was bedeutet das " Layer 6 [ 9:B.ft12cemi/Conn 37.879] SN: still waiting". Direkt danach kommt in der ETS "Das Gerät antwortet nicht"
Code:root@raspberrypi:~# knxd -t 1022 -e 1.1.1 -E 1.1.200:210 -u/tmp/eib -B log -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720 Layer 4 [ 1:main 0.000] R state: initialized Layer 4 [ 1:main 0.000] R state: setting up Layer 4 [ 5:C.cache/G 0.000] GroupCacheInit Layer 3 [ 4:C.cache/Conn 0.000] registerLink: C.cache Layer 6 [ 1:main 0.000] SN: OK Layer 6 [ 2:main/L 0.000] SN: OK L Layer 3 [ 6:A.unix/local 0.000] registerLink: A.unix Layer 0 [11:log/B.ft12cemi 0.001] State setup Layer 3 [ 9:B.ft12cemi/Conn 0.001] registerLink: B.ft12cemi Layer 0 [17:log/tunnel 0.001] State setup Layer 0 [17:log/tunnel 0.001] send next Layer 6 [ 1:main 0.001] SN: send_more set Layer 6 [ 1:main 0.001] SN: send_more set Layer 3 [14:server/Server 0.001] registerLink: server Layer 6 [ 1:main 0.001] SN: send_more set Layer 3 [20:D.tcp/inet 0.001] registerLink: D.tcp Layer 4 [ 1:main 0.001] R state: setup OK Layer 4 [ 1:main 0.001] R state: trigger going up Layer 3 [20:D.tcp/inet 0.001] Start: cfg:D.tcp Layer 8 [20:D.tcp/inet 0.001] OpenInetSocket 6720 Layer 8 [20:D.tcp/inet 0.002] InetSocket opened Layer 5 [20:D.tcp/inet 0.002] Started Layer 4 [20:D.tcp/inet 0.002] R state: started Layer 6 [ 1:main 0.002] SN: send_more set Layer 3 [14:server/Server 0.002] Start: cfg:server Layer 8 [14:server/Server 0.002] Open Layer 8 [24:router/driver 0.002] OpenD Layer 8 [24:router/driver 0.002] OpenedD Layer 3 [23:router/ConnC 0.003] registerLink: router_23 Layer 3 [23:router/ConnC 0.003] Start: cfg:router Layer 5 [23:router/ConnC 0.003] Starting Layer 5 [23:router/ConnC 0.003] Started Layer 4 [23:router/ConnC 0.003] R state: started Layer 6 [ 1:main 0.003] SN: send_more set Layer 8 [14:server/Server 0.003] Opened Layer 5 [14:server/Server 0.003] Started Layer 4 [14:server/Server 0.003] R state: started Layer 6 [ 1:main 0.003] SN: send_more set Layer 3 [ 9:B.ft12cemi/Conn 0.003] Start: cfg:B.ft12cemi Layer 5 [ 9:B.ft12cemi/Conn 0.003] Starting Layer 0 [11:log/B.ft12cemi 0.003] State start Layer 1 [12:B.ft12cemi/ft12ser 0.003] Open Layer 1 [12:B.ft12cemi/ft12ser 0.003] Opened Layer 0 [11:log/B.ft12cemi 0.003] send next Layer 6 [ 1:main 0.003] SN: send_more set Layer 2 [13:B.ft12cemi/ft12cemi 0.003] OpenL2 Layer 1 [12:B.ft12cemi/ft12ser 0.003] Send(008): F6 00 08 01 34 10 01 00 Layer 4 [ 1:main 0.004] R state: check start Layer 4 [ 1:main 0.004] R state: check end: want_up 1 some 1>1 all 0>0, going 1 up 3 down 2 Layer 0 [11:log/B.ft12cemi 0.015] State started Layer 5 [ 9:B.ft12cemi/Conn 0.015] Started Layer 4 [ 9:B.ft12cemi/Conn 0.015] R state: started Layer 6 [ 1:main 0.015] SN: send_more set Layer 3 [ 6:A.unix/local 0.015] Start: cfg:A.unix Layer 8 [ 6:A.unix/local 0.015] OpenLocalSocket /tmp/eib Layer 8 [ 6:A.unix/local 0.015] LocalSocket opened Layer 5 [ 6:A.unix/local 0.015] Started Layer 4 [ 6:A.unix/local 0.015] R state: started Layer 6 [ 1:main 0.015] SN: send_more set Layer 3 [ 4:C.cache/Conn 0.015] Start: cfg:C.cache Layer 5 [ 4:C.cache/Conn 0.015] Starting Layer 5 [ 4:C.cache/Conn 0.015] Started Layer 4 [ 4:C.cache/Conn 0.015] R state: started Layer 6 [ 1:main 0.015] SN: send_more set Layer 4 [ 1:main 0.015] R state: going up triggered Layer 4 [ 1:main 0.015] R state: check start Layer 4 [ 1:main 0.015] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 6 down 0 Layer 4 [ 1:main 0.015] R state: all drivers up Layer 4 [ 1:main 0.015] R state: up Layer 0 [11:log/B.ft12cemi 9.696] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 9.696] Has Addr 1.1.6: no Layer 1 [14:server/Server 9.696] Send(010): 29 00 B0 50 11 01 11 06 00 80 Layer 0 [11:log/B.ft12cemi 9.696] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 9.696] Addr Check 1.1.6: yes Layer 0 [11:log/B.ft12cemi 9.696] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_CONNECT_REQ Layer 1 [13:B.ft12cemi/ft12cemi 9.696] SendEMI(010): 11 00 B0 50 11 01 11 06 00 80 Layer 1 [12:B.ft12cemi/ft12ser 9.696] Send(010): 11 00 B0 50 11 01 11 06 00 80 Layer 6 [ 9:B.ft12cemi/Conn 9.697] SN: still waiting Layer 6 [ 1:main 9.697] SN: wait L Layer 6 [ 1:main 9.697] SN: wait L Layer 6 [ 1:main 9.697] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 9.805] RecvEMI(010): 2E 00 91 50 11 01 11 06 00 80 Layer 2 [13:B.ft12cemi/ft12cemi 9.805] Confirmed Layer 0 [11:log/B.ft12cemi 9.805] send next Layer 6 [ 1:main 9.805] SN: OK Layer 6 [ 2:main/L 9.805] SN: OK L Layer 0 [11:log/B.ft12cemi 9.805] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 9.805] Has Addr 1.1.6: no Layer 1 [14:server/Server 9.805] Send(011): 29 00 B0 50 11 01 11 06 01 43 00 Layer 0 [11:log/B.ft12cemi 9.805] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 9.806] Addr Check 1.1.6: yes Layer 0 [11:log/B.ft12cemi 9.806] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 9.806] SendEMI(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 9.806] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 9.806] SN: still waiting Layer 6 [ 1:main 9.806] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 9.925] RecvEMI(011): 2E 00 91 50 11 01 11 06 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 9.925] Confirmed Layer 0 [11:log/B.ft12cemi 9.925] send next Layer 6 [ 1:main 9.925] SN: OK Layer 6 [ 2:main/L 9.925] SN: OK L Layer 1 [14:server/Server 9.925] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [11:log/B.ft12cemi 9.925] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 9.925] Addr Check 0/0/0: yes Layer 0 [11:log/B.ft12cemi 9.925] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [13:B.ft12cemi/ft12cemi 9.925] SendEMI(011): 11 00 B0 D0 11 01 00 00 01 01 00 Layer 1 [12:B.ft12cemi/ft12ser 9.925] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00 Layer 6 [ 9:B.ft12cemi/Conn 9.925] SN: still waiting Layer 6 [ 1:main 9.925] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 9.989] RecvEMI(011): 2E 00 B0 D0 11 01 00 00 01 01 00 Layer 2 [13:B.ft12cemi/ft12cemi 9.989] Confirmed Layer 0 [11:log/B.ft12cemi 9.989] send next Layer 6 [ 1:main 9.989] SN: OK Layer 6 [ 2:main/L 9.989] SN: OK L Layer 1 [13:B.ft12cemi/ft12cemi 10.009] RecvEMI(011): 29 00 B0 D0 11 05 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 10.009] Recv L_Data system from 1.1.5 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [11:log/B.ft12cemi 10.009] Has Addr 1.1.5: no Layer 8 [ 1:main 10.009] unknown addr 1.1.5 Layer 0 [11:log/B.ft12cemi 10.009] Add Addr 1.1.5 Layer 1 [14:server/Server 10.009] Send(011): 29 00 B0 C0 11 05 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 10.009] Has Addr 1.1.5: yes Layer 6 [ 1:main 10.009] SN: OK Layer 6 [ 2:main/L 10.009] SN: OK L Layer 1 [14:server/Server 12.668] Send(013): 29 00 B0 D0 11 01 00 00 03 00 C0 11 06 Layer 0 [11:log/B.ft12cemi 12.668] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 12.668] Addr Check 0/0/0: yes Layer 0 [11:log/B.ft12cemi 12.669] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Write 1.1.6 Layer 1 [13:B.ft12cemi/ft12cemi 12.669] SendEMI(013): 11 00 B0 D0 11 01 00 00 03 00 C0 11 06 Layer 1 [12:B.ft12cemi/ft12ser 12.669] Send(013): 11 00 B0 D0 11 01 00 00 03 00 C0 11 06 Layer 6 [ 9:B.ft12cemi/Conn 12.669] SN: still waiting Layer 6 [ 1:main 12.669] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 12.737] RecvEMI(013): 2E 00 B0 D0 11 01 00 00 03 00 C0 11 06 Layer 2 [13:B.ft12cemi/ft12cemi 12.737] Confirmed Layer 0 [11:log/B.ft12cemi 12.737] send next Layer 6 [ 1:main 12.737] SN: OK Layer 6 [ 2:main/L 12.737] SN: OK L Layer 1 [14:server/Server 12.868] Send(011): 29 00 B0 D0 11 01 00 00 01 01 00 Layer 0 [11:log/B.ft12cemi 12.868] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 12.868] Addr Check 0/0/0: yes Layer 0 [11:log/B.ft12cemi 12.868] Send L_Data system from 1.1.1 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [13:B.ft12cemi/ft12cemi 12.868] SendEMI(011): 11 00 B0 D0 11 01 00 00 01 01 00 Layer 1 [12:B.ft12cemi/ft12ser 12.868] Send(011): 11 00 B0 D0 11 01 00 00 01 01 00 Layer 6 [ 9:B.ft12cemi/Conn 12.869] SN: still waiting Layer 6 [ 1:main 12.869] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 12.929] RecvEMI(011): 2E 00 B0 D0 11 01 00 00 01 01 00 Layer 2 [13:B.ft12cemi/ft12cemi 12.929] Confirmed Layer 0 [11:log/B.ft12cemi 12.929] send next Layer 6 [ 1:main 12.929] SN: OK Layer 6 [ 2:main/L 12.929] SN: OK L Layer 1 [13:B.ft12cemi/ft12cemi 12.949] RecvEMI(011): 29 00 B0 D0 11 06 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 12.949] Recv L_Data system from 1.1.6 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [11:log/B.ft12cemi 12.949] Has Addr 1.1.6: no Layer 8 [ 1:main 12.949] unknown addr 1.1.6 Layer 0 [11:log/B.ft12cemi 12.949] Add Addr 1.1.6 Layer 1 [14:server/Server 12.949] Send(011): 29 00 B0 C0 11 06 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 12.949] Has Addr 1.1.6: yes Layer 6 [ 1:main 12.949] SN: OK Layer 6 [ 2:main/L 12.949] SN: OK L Layer 0 [11:log/B.ft12cemi 13.111] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 13.111] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 13.111] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 13.111] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 13.111] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_CONNECT_REQ Layer 1 [13:B.ft12cemi/ft12cemi 13.112] SendEMI(010): 11 00 B0 50 11 01 11 06 00 80 Layer 1 [12:B.ft12cemi/ft12ser 13.112] Send(010): 11 00 B0 50 11 01 11 06 00 80 Layer 6 [ 9:B.ft12cemi/Conn 13.112] SN: still waiting Layer 6 [ 1:main 13.112] SN: wait L Layer 6 [ 1:main 13.129] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 13.171] RecvEMI(010): 2E 00 B0 50 11 01 11 06 00 80 Layer 2 [13:B.ft12cemi/ft12cemi 13.171] Confirmed Layer 0 [11:log/B.ft12cemi 13.171] send next Layer 6 [ 1:main 13.171] SN: OK Layer 6 [ 2:main/L 13.171] SN: OK L Layer 0 [11:log/B.ft12cemi 13.171] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 13.171] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 13.171] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 13.171] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 13.171] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 13.171] SendEMI(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 13.171] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 13.171] SN: still waiting Layer 6 [ 1:main 13.171] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 13.236] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 13.236] Confirmed Layer 0 [11:log/B.ft12cemi 13.236] send next Layer 6 [ 1:main 13.236] SN: OK Layer 6 [ 2:main/L 13.236] SN: OK L Layer 0 [11:log/B.ft12cemi 16.133] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 16.133] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 16.133] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 16.133] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 16.133] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 16.133] SendEMI(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 16.134] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 16.134] SN: still waiting Layer 6 [ 1:main 16.134] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 16.195] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 16.195] Confirmed Layer 0 [11:log/B.ft12cemi 16.195] send next Layer 6 [ 1:main 16.195] SN: OK Layer 6 [ 2:main/L 16.195] SN: OK L Layer 0 [11:log/B.ft12cemi 19.155] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 19.155] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 19.155] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 19.155] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 19.155] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 19.155] SendEMI(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 19.155] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 19.155] SN: still waiting Layer 6 [ 1:main 19.155] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 19.215] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 19.215] Confirmed Layer 0 [11:log/B.ft12cemi 19.215] send next Layer 6 [ 1:main 19.215] SN: OK Layer 6 [ 2:main/L 19.215] SN: OK L Layer 0 [11:log/B.ft12cemi 22.148] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 22.148] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 22.148] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 22.148] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 22.148] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 22.148] SendEMI(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 22.148] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 22.148] SN: still waiting Layer 6 [ 1:main 22.148] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 22.210] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 22.210] Confirmed Layer 0 [11:log/B.ft12cemi 22.210] send next Layer 6 [ 1:main 22.210] SN: OK Layer 6 [ 2:main/L 22.210] SN: OK L Layer 0 [11:log/B.ft12cemi 25.258] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 25.258] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 25.258] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 25.258] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 25.258] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DISCONNECT_REQ Layer 1 [13:B.ft12cemi/ft12cemi 25.258] SendEMI(010): 11 00 B0 50 11 01 11 06 00 81 Layer 1 [12:B.ft12cemi/ft12ser 25.259] Send(010): 11 00 B0 50 11 01 11 06 00 81 Layer 6 [ 9:B.ft12cemi/Conn 25.259] SN: still waiting Layer 6 [ 1:main 25.259] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 25.322] RecvEMI(010): 2E 00 B0 50 11 01 11 06 00 81 Layer 2 [13:B.ft12cemi/ft12cemi 25.322] Confirmed Layer 0 [11:log/B.ft12cemi 25.322] send next Layer 6 [ 1:main 25.322] SN: OK Layer 6 [ 2:main/L 25.322] SN: OK L Layer 0 [11:log/B.ft12cemi 25.788] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 25.788] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 25.788] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 25.788] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 25.788] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_CONNECT_REQ Layer 1 [13:B.ft12cemi/ft12cemi 25.788] SendEMI(010): 11 00 B0 50 11 01 11 06 00 80 Layer 1 [12:B.ft12cemi/ft12ser 25.788] Send(010): 11 00 B0 50 11 01 11 06 00 80 Layer 6 [ 9:B.ft12cemi/Conn 25.788] SN: still waiting Layer 6 [ 1:main 25.789] SN: wait L Layer 6 [ 1:main 25.790] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 25.852] RecvEMI(010): 2E 00 B0 50 11 01 11 06 00 80 Layer 2 [13:B.ft12cemi/ft12cemi 25.852] Confirmed Layer 0 [11:log/B.ft12cemi 25.852] send next Layer 6 [ 1:main 25.852] SN: OK Layer 6 [ 2:main/L 25.852] SN: OK L Layer 0 [11:log/B.ft12cemi 25.852] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 25.852] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 25.852] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 25.852] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 25.853] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 25.853] SendEMI(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 25.853] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 25.853] SN: still waiting Layer 6 [ 1:main 25.853] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 25.917] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 25.917] Confirmed Layer 0 [11:log/B.ft12cemi 25.917] send next Layer 6 [ 1:main 25.917] SN: OK Layer 6 [ 2:main/L 25.917] SN: OK L Layer 0 [11:log/B.ft12cemi 28.720] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 28.720] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 28.720] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 28.720] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 28.720] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 28.720] SendEMI(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 28.720] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 28.720] SN: still waiting Layer 6 [ 1:main 28.720] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 28.783] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 28.783] Confirmed Layer 0 [11:log/B.ft12cemi 28.783] send next Layer 6 [ 1:main 28.783] SN: OK Layer 6 [ 2:main/L 28.783] SN: OK L Layer 0 [11:log/B.ft12cemi 31.721] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 31.721] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 31.721] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 31.722] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 31.722] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 31.722] SendEMI(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 31.722] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 31.722] SN: still waiting Layer 6 [ 1:main 31.722] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 31.786] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 31.787] Confirmed Layer 0 [11:log/B.ft12cemi 31.787] send next Layer 6 [ 1:main 31.788] SN: OK Layer 6 [ 2:main/L 31.788] SN: OK L Layer 0 [11:log/B.ft12cemi 34.723] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 34.723] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 34.723] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 34.723] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 34.723] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DATA_CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 34.723] SendEMI(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 34.723] Send(011): 11 00 B0 50 11 01 11 06 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 34.723] SN: still waiting Layer 6 [ 1:main 34.723] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 34.785] RecvEMI(011): 2E 00 B0 50 11 01 11 06 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 34.785] Confirmed Layer 0 [11:log/B.ft12cemi 34.785] send next Layer 6 [ 1:main 34.785] SN: OK Layer 6 [ 2:main/L 34.785] SN: OK L Layer 0 [11:log/B.ft12cemi 37.879] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 37.879] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 37.879] Has Addr 1.1.1: no Layer 0 [11:log/B.ft12cemi 37.879] Has Addr 1.1.6: yes Layer 0 [11:log/B.ft12cemi 37.879] Send L_Data system from 1.1.1 to 1.1.6 hops: 05 T_DISCONNECT_REQ Layer 1 [13:B.ft12cemi/ft12cemi 37.879] SendEMI(010): 11 00 B0 50 11 01 11 06 00 81 Layer 1 [12:B.ft12cemi/ft12ser 37.879] Send(010): 11 00 B0 50 11 01 11 06 00 81 Layer 6 [ 9:B.ft12cemi/Conn 37.879] SN: still waiting Layer 6 [ 1:main 37.879] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 37.942] RecvEMI(010): 2E 00 B0 50 11 01 11 06 00 81 Layer 2 [13:B.ft12cemi/ft12cemi 37.942] Confirmed Layer 0 [11:log/B.ft12cemi 37.942] send next Layer 6 [ 1:main 37.942] SN: OK Layer 6 [ 2:main/L 37.942] SN: OK L
Kommentar
-
Das bedeutet nur, dass das letzte gesendete Paket des ft12cemi-Treibers noch nicht bestätigt wurde, folglich kann ich kein neues senden. Das wird aber mit dem Bestätigungspaket (RecvCEMI: 2E 00 …) freigegeben, das "SN: OK" meldet das.ich habe noch etwas rumgetestet. Was bedeutet das " Layer 6 [ 9:B.ft12cemi/Conn 37.879] SN: still waiting". Direkt danach kommt in der ETS "Das Gerät antwortet nicht"
Das Problem ist viel einfacher: der BAOS-Modul leitet dir an physische Adressen gerichtete Antworten gar nicht erst weiter. Das letzte Paket, das ankommt, ist
Das sieht eher nach einem Konfigurationsproblem aus. Ich befürchte, das Modul ist der Meinung, die Linie 1.1.* ist auf dem knx-Kabel zu finden, daher werden die Pakete aus Prinzip nicht weitergeleitet. Schau dir mal die Konfiguration des Moduls an, und/oder verwende bei -E Adressen aus einem anderen Bereich als 1.1.X.Code:Layer 0 [11:log/B.ft12cemi 12.949] Recv L_Data system from 1.1.6 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Response
DistKV, Home Assistant, 1wire, KNX, Python, Asterisk, SMD-LötkolbenKommentar
-
Programmieren mit Weizierl Tool einer Physikalischen Adresse (erfolgreich)
Habe im Anhang auch mal die Weinzierl settings hochgeladen, evtl kann man da ja was sehen....
Code:root@raspberrypi:~# knxd -t 1022 -e 15.15.18 -E 1.1.200:210 -u/tmp/eib -B log -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720 Layer 4 [ 1:main 0.000] R state: initialized Layer 4 [ 1:main 0.000] R state: setting up Layer 4 [ 5:C.cache/G 0.000] GroupCacheInit Layer 3 [ 4:C.cache/Conn 0.000] registerLink: C.cache Layer 6 [ 1:main 0.000] SN: OK Layer 6 [ 2:main/L 0.000] SN: OK L Layer 3 [ 6:A.unix/local 0.000] registerLink: A.unix Layer 0 [11:log/B.ft12cemi 0.001] State setup Layer 3 [ 9:B.ft12cemi/Conn 0.001] registerLink: B.ft12cemi Layer 0 [17:log/tunnel 0.001] State setup Layer 0 [17:log/tunnel 0.001] send next Layer 6 [ 1:main 0.001] SN: send_more set Layer 6 [ 1:main 0.001] SN: send_more set Layer 3 [14:server/Server 0.001] registerLink: server Layer 6 [ 1:main 0.001] SN: send_more set Layer 3 [20:D.tcp/inet 0.001] registerLink: D.tcp Layer 4 [ 1:main 0.001] R state: setup OK Layer 4 [ 1:main 0.001] R state: trigger going up Layer 3 [20:D.tcp/inet 0.001] Start: cfg:D.tcp Layer 8 [20:D.tcp/inet 0.001] OpenInetSocket 6720 Layer 8 [20:D.tcp/inet 0.002] InetSocket opened Layer 5 [20:D.tcp/inet 0.002] Started Layer 4 [20:D.tcp/inet 0.002] R state: started Layer 6 [ 1:main 0.002] SN: send_more set Layer 3 [14:server/Server 0.002] Start: cfg:server Layer 8 [14:server/Server 0.002] Open Layer 8 [24:router/driver 0.002] OpenD Layer 8 [24:router/driver 0.003] OpenedD Layer 3 [23:router/ConnC 0.003] registerLink: router_23 Layer 3 [23:router/ConnC 0.003] Start: cfg:router Layer 5 [23:router/ConnC 0.003] Starting Layer 5 [23:router/ConnC 0.003] Started Layer 4 [23:router/ConnC 0.003] R state: started Layer 6 [ 1:main 0.003] SN: send_more set Layer 8 [14:server/Server 0.003] Opened Layer 5 [14:server/Server 0.003] Started Layer 4 [14:server/Server 0.003] R state: started Layer 6 [ 1:main 0.003] SN: send_more set Layer 3 [ 9:B.ft12cemi/Conn 0.003] Start: cfg:B.ft12cemi Layer 5 [ 9:B.ft12cemi/Conn 0.003] Starting Layer 0 [11:log/B.ft12cemi 0.003] State start Layer 1 [12:B.ft12cemi/ft12ser 0.003] Open Layer 1 [12:B.ft12cemi/ft12ser 0.003] Opened Layer 0 [11:log/B.ft12cemi 0.004] send next Layer 6 [ 1:main 0.004] SN: send_more set Layer 2 [13:B.ft12cemi/ft12cemi 0.004] OpenL2 Layer 1 [12:B.ft12cemi/ft12ser 0.004] Send(008): F6 00 08 01 34 10 01 00 Layer 4 [ 1:main 0.004] R state: check start Layer 4 [ 1:main 0.004] R state: check end: want_up 1 some 1>1 all 0>0, going 1 up 3 down 2 Layer 0 [11:log/B.ft12cemi 0.015] State started Layer 5 [ 9:B.ft12cemi/Conn 0.015] Started Layer 4 [ 9:B.ft12cemi/Conn 0.015] R state: started Layer 6 [ 1:main 0.015] SN: send_more set Layer 3 [ 6:A.unix/local 0.015] Start: cfg:A.unix Layer 8 [ 6:A.unix/local 0.015] OpenLocalSocket /tmp/eib Layer 8 [ 6:A.unix/local 0.015] LocalSocket opened Layer 5 [ 6:A.unix/local 0.015] Started Layer 4 [ 6:A.unix/local 0.015] R state: started Layer 6 [ 1:main 0.015] SN: send_more set Layer 3 [ 4:C.cache/Conn 0.015] Start: cfg:C.cache Layer 5 [ 4:C.cache/Conn 0.015] Starting Layer 5 [ 4:C.cache/Conn 0.015] Started Layer 4 [ 4:C.cache/Conn 0.015] R state: started Layer 6 [ 1:main 0.015] SN: send_more set Layer 4 [ 1:main 0.015] R state: going up triggered Layer 4 [ 1:main 0.015] R state: check start Layer 4 [ 1:main 0.015] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 6 down 0 Layer 4 [ 1:main 0.015] R state: all drivers up Layer 4 [ 1:main 0.015] R state: up Layer 1 [13:B.ft12cemi/ft12cemi 0.036] RecvEMI(007): F5 00 08 01 34 10 01 Layer 2 [13:B.ft12cemi/ft12cemi 0.036] unknown data Layer 1 [14:server/Server 21.779] Send(011): 29 00 B0 D0 FF 12 00 00 01 01 00 Layer 0 [11:log/B.ft12cemi 21.780] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 21.780] Addr Check 0/0/0: yes Layer 0 [11:log/B.ft12cemi 21.780] Send L_Data system from 15.15.18 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [13:B.ft12cemi/ft12cemi 21.780] SendEMI(011): 11 00 B0 D0 FF 12 00 00 01 01 00 Layer 1 [12:B.ft12cemi/ft12ser 21.780] Send(011): 11 00 B0 D0 FF 12 00 00 01 01 00 Layer 6 [ 9:B.ft12cemi/Conn 21.780] SN: still waiting Layer 6 [ 1:main 21.780] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 21.841] RecvEMI(011): 2E 00 B0 D0 FF 12 00 00 01 01 00 Layer 2 [13:B.ft12cemi/ft12cemi 21.841] Confirmed Layer 0 [11:log/B.ft12cemi 21.841] send next Layer 6 [ 1:main 21.841] SN: OK Layer 6 [ 2:main/L 21.841] SN: OK L Layer 1 [13:B.ft12cemi/ft12cemi 21.861] RecvEMI(011): 29 00 B0 E0 11 06 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 21.861] Recv L_Data system from 1.1.6 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [11:log/B.ft12cemi 21.861] Has Addr 1.1.6: no Layer 8 [ 1:main 21.861] unknown addr 1.1.6 Layer 0 [11:log/B.ft12cemi 21.861] Add Addr 1.1.6 Layer 1 [14:server/Server 21.861] Send(011): 29 00 B0 D0 11 06 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 21.861] Has Addr 1.1.6: yes Layer 6 [ 1:main 21.862] SN: OK Layer 6 [ 2:main/L 21.862] SN: OK L Layer 1 [14:server/Server 22.304] Send(013): 29 00 B0 D0 FF 12 00 00 03 00 C0 11 07 Layer 0 [11:log/B.ft12cemi 22.304] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 22.304] Addr Check 0/0/0: yes Layer 0 [11:log/B.ft12cemi 22.304] Send L_Data system from 15.15.18 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Write 1.1.7 Layer 1 [13:B.ft12cemi/ft12cemi 22.304] SendEMI(013): 11 00 B0 D0 FF 12 00 00 03 00 C0 11 07 Layer 1 [12:B.ft12cemi/ft12ser 22.304] Send(013): 11 00 B0 D0 FF 12 00 00 03 00 C0 11 07 Layer 6 [ 9:B.ft12cemi/Conn 22.304] SN: still waiting Layer 6 [ 1:main 22.304] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 22.372] RecvEMI(013): 2E 00 B0 D0 FF 12 00 00 03 00 C0 11 07 Layer 2 [13:B.ft12cemi/ft12cemi 22.372] Confirmed Layer 0 [11:log/B.ft12cemi 22.372] send next Layer 6 [ 1:main 22.372] SN: OK Layer 6 [ 2:main/L 22.372] SN: OK L Layer 1 [14:server/Server 22.522] Send(011): 29 00 B0 D0 FF 12 00 00 01 01 00 Layer 0 [11:log/B.ft12cemi 22.522] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 22.522] Addr Check 0/0/0: yes Layer 0 [11:log/B.ft12cemi 22.522] Send L_Data system from 15.15.18 to 0/0/0 hops: 05 T_DATA_XXX_REQ A_IndividualAddress_Read Layer 1 [13:B.ft12cemi/ft12cemi 22.522] SendEMI(011): 11 00 B0 D0 FF 12 00 00 01 01 00 Layer 1 [12:B.ft12cemi/ft12ser 22.522] Send(011): 11 00 B0 D0 FF 12 00 00 01 01 00 Layer 6 [ 9:B.ft12cemi/Conn 22.522] SN: still waiting Layer 6 [ 1:main 22.522] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 22.583] RecvEMI(011): 2E 00 B0 D0 FF 12 00 00 01 01 00 Layer 2 [13:B.ft12cemi/ft12cemi 22.583] Confirmed Layer 0 [11:log/B.ft12cemi 22.583] send next Layer 6 [ 1:main 22.583] SN: OK Layer 6 [ 2:main/L 22.583] SN: OK L Layer 1 [13:B.ft12cemi/ft12cemi 22.603] RecvEMI(011): 29 00 B0 E0 11 07 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 22.603] Recv L_Data system from 1.1.7 to 0/0/0 hops: 06 T_DATA_XXX_REQ A_IndividualAddress_Response Layer 0 [11:log/B.ft12cemi 22.603] Has Addr 1.1.7: no Layer 8 [ 1:main 22.603] unknown addr 1.1.7 Layer 0 [11:log/B.ft12cemi 22.603] Add Addr 1.1.7 Layer 1 [14:server/Server 22.603] Send(011): 29 00 B0 D0 11 07 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 22.603] Has Addr 1.1.7: yes Layer 6 [ 1:main 22.603] SN: OK Layer 6 [ 2:main/L 22.603] SN: OK L
Zuletzt geändert von jeff25; 22.03.2017, 10:17.Kommentar
-
Ich schrieb:
Du daraufhin:verwende bei -E Adressen aus einem anderen Bereich als 1.1.X.
-E, nicht -e. Letzteres ist (fast) egal. Außerdem hast du wieder :210 verwendet. :-PCode:knxd -t 1022 -e 15.15.18 -E 1.1.200:210 -u/tmp/eib -B log -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720
DistKV, Home Assistant, 1wire, KNX, Python, Asterisk, SMD-LötkolbenKommentar
-
Sorry hast ja recht.... aber nun:
In der Weizierl Doku steht das das Modul von Hausaus die Adresse 15.15.255 hat. Ist das ein Problem?
Code:root@raspberrypi:~# knxd -t 1022 -e 1.1.1 -E 15.15.200:2 -u/tmp/eib -B log -b ft12cemi:/dev/ttyAMA0 -D -B log -TRS -c -i 6720 Layer 4 [ 1:main 0.000] R state: initialized Layer 4 [ 1:main 0.000] R state: setting up Layer 4 [ 5:C.cache/G 0.001] GroupCacheInit Layer 3 [ 4:C.cache/Conn 0.001] registerLink: C.cache Layer 6 [ 1:main 0.002] SN: OK Layer 6 [ 2:main/L 0.002] SN: OK L Layer 3 [ 6:A.unix/local 0.003] registerLink: A.unix Layer 0 [11:log/B.ft12cemi 0.003] State setup Layer 3 [ 9:B.ft12cemi/Conn 0.004] registerLink: B.ft12cemi Layer 0 [17:log/tunnel 0.004] State setup Layer 0 [17:log/tunnel 0.005] send next Layer 6 [ 1:main 0.005] SN: send_more set Layer 6 [ 1:main 0.006] SN: send_more set Layer 3 [14:server/Server 0.006] registerLink: server Layer 6 [ 1:main 0.007] SN: send_more set Layer 3 [20:D.tcp/inet 0.007] registerLink: D.tcp Layer 4 [ 1:main 0.008] R state: setup OK Layer 4 [ 1:main 0.008] R state: trigger going up Layer 3 [20:D.tcp/inet 0.009] Start: cfg:D.tcp Layer 8 [20:D.tcp/inet 0.009] OpenInetSocket 6720 Layer 8 [20:D.tcp/inet 0.010] InetSocket opened Layer 5 [20:D.tcp/inet 0.010] Started Layer 4 [20:D.tcp/inet 0.010] R state: started Layer 6 [ 1:main 0.011] SN: send_more set Layer 3 [14:server/Server 0.011] Start: cfg:server Layer 8 [14:server/Server 0.012] Open Layer 8 [24:router/driver 0.012] OpenD Layer 8 [24:router/driver 0.014] OpenedD Layer 3 [23:router/ConnC 0.014] registerLink: router_23 Layer 3 [23:router/ConnC 0.015] Start: cfg:router Layer 5 [23:router/ConnC 0.015] Starting Layer 5 [23:router/ConnC 0.015] Started Layer 4 [23:router/ConnC 0.016] R state: started Layer 6 [ 1:main 0.016] SN: send_more set Layer 8 [14:server/Server 0.016] Opened Layer 5 [14:server/Server 0.017] Started Layer 4 [14:server/Server 0.017] R state: started Layer 6 [ 1:main 0.018] SN: send_more set Layer 3 [ 9:B.ft12cemi/Conn 0.018] Start: cfg:B.ft12cemi Layer 5 [ 9:B.ft12cemi/Conn 0.018] Starting Layer 0 [11:log/B.ft12cemi 0.019] State start Layer 1 [12:B.ft12cemi/ft12ser 0.019] Open Layer 1 [12:B.ft12cemi/ft12ser 0.020] Opened Layer 0 [11:log/B.ft12cemi 0.021] send next Layer 6 [ 1:main 0.021] SN: send_more set Layer 2 [13:B.ft12cemi/ft12cemi 0.021] OpenL2 Layer 1 [12:B.ft12cemi/ft12ser 0.022] Send(008): F6 00 08 01 34 10 01 00 Layer 4 [ 1:main 0.022] R state: check start Layer 4 [ 1:main 0.023] R state: check end: want_up 1 some 1>1 all 0>0, going 1 up 3 down 2 Layer 0 [11:log/B.ft12cemi 0.034] State started Layer 5 [ 9:B.ft12cemi/Conn 0.035] Started Layer 4 [ 9:B.ft12cemi/Conn 0.035] R state: started Layer 6 [ 1:main 0.035] SN: send_more set Layer 3 [ 6:A.unix/local 0.036] Start: cfg:A.unix Layer 8 [ 6:A.unix/local 0.036] OpenLocalSocket /tmp/eib Layer 8 [ 6:A.unix/local 0.037] LocalSocket opened Layer 5 [ 6:A.unix/local 0.037] Started Layer 4 [ 6:A.unix/local 0.037] R state: started Layer 6 [ 1:main 0.037] SN: send_more set Layer 3 [ 4:C.cache/Conn 0.037] Start: cfg:C.cache Layer 5 [ 4:C.cache/Conn 0.037] Starting Layer 5 [ 4:C.cache/Conn 0.038] Started Layer 4 [ 4:C.cache/Conn 0.038] R state: started Layer 6 [ 1:main 0.038] SN: send_more set Layer 4 [ 1:main 0.038] R state: going up triggered Layer 4 [ 1:main 0.038] R state: check start Layer 4 [ 1:main 0.038] R state: check end: want_up 1 some 1>1 all 0>1, going 0 up 6 down 0 Layer 4 [ 1:main 0.039] R state: all drivers up Layer 4 [ 1:main 0.039] R state: up Layer 1 [13:B.ft12cemi/ft12cemi 0.059] RecvEMI(007): F5 00 08 01 34 10 01 Layer 2 [13:B.ft12cemi/ft12cemi 0.059] unknown data Layer 0 [11:log/B.ft12cemi 2.610] Has Addr 15.15.18: no Layer 8 [ 1:main 2.610] unknown addr 15.15.18 Layer 0 [11:log/B.ft12cemi 2.610] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 2.610] Addr Check 0/0/0: yes Layer 0 [11:log/B.ft12cemi 2.610] Send L_Data system from 15.15.18 to 0/0/0 hops: 05 T_DATA_ XX_REQ A_IndividualAddress_Read Layer 1 [13:B.ft12cemi/ft12cemi 2.611] SendEMI(011): 11 00 B0 D0 FF 12 00 00 01 01 00 Layer 1 [12:B.ft12cemi/ft12ser 2.611] Send(011): 11 00 B0 D0 FF 12 00 00 01 01 00 Layer 6 [ 9:B.ft12cemi/Conn 2.611] SN: still waiting Layer 6 [ 1:main 2.611] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 2.674] RecvEMI(011): 2E 00 B0 D0 FF 12 00 00 01 01 00 Layer 2 [13:B.ft12cemi/ft12cemi 2.674] Confirmed Layer 0 [11:log/B.ft12cemi 2.675] send next Layer 6 [ 1:main 2.675] SN: OK Layer 6 [ 2:main/L 2.675] SN: OK L Layer 1 [13:B.ft12cemi/ft12cemi 2.694] RecvEMI(011): 29 00 B0 E0 11 07 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 2.695] Recv L_Data system from 1.1.7 to 0/0/0 hops: 06 T_DATA_XXX REQ A_IndividualAddress_Response Layer 0 [11:log/B.ft12cemi 2.695] Has Addr 1.1.7: no Layer 8 [ 1:main 2.695] unknown addr 1.1.7 Layer 0 [11:log/B.ft12cemi 2.695] Add Addr 1.1.7 Layer 1 [14:server/Server 2.695] Send(011): 29 00 B0 D0 11 07 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 2.695] Has Addr 1.1.7: yes Layer 6 [ 1:main 2.695] SN: OK Layer 6 [ 2:main/L 2.695] SN: OK L Layer 8 [23:router/ConnC 4.017] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 4.017] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 4.017] Addr Check 0/0/0: yes Layer 0 [11:log/B.ft12cemi 4.017] Send L_Data system from 15.15.18 to 0/0/0 hops: 05 T_DATA_ XX_REQ A_IndividualAddress_Write 1.1.5 Layer 1 [13:B.ft12cemi/ft12cemi 4.017] SendEMI(013): 11 00 B0 D0 FF 12 00 00 03 00 C0 11 05 Layer 1 [12:B.ft12cemi/ft12ser 4.017] Send(013): 11 00 B0 D0 FF 12 00 00 03 00 C0 11 05 Layer 6 [ 9:B.ft12cemi/Conn 4.017] SN: still waiting Layer 6 [ 1:main 4.017] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 4.086] RecvEMI(013): 2E 00 B0 D0 FF 12 00 00 03 00 C0 11 05 Layer 2 [13:B.ft12cemi/ft12cemi 4.086] Confirmed Layer 0 [11:log/B.ft12cemi 4.086] send next Layer 6 [ 1:main 4.086] SN: OK Layer 6 [ 2:main/L 4.086] SN: OK L Layer 8 [23:router/ConnC 4.218] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 4.218] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 4.218] Addr Check 0/0/0: yes Layer 0 [11:log/B.ft12cemi 4.218] Send L_Data system from 15.15.18 to 0/0/0 hops: 05 T_DATA_ XX_REQ A_IndividualAddress_Read Layer 1 [13:B.ft12cemi/ft12cemi 4.218] SendEMI(011): 11 00 B0 D0 FF 12 00 00 01 01 00 Layer 1 [12:B.ft12cemi/ft12ser 4.218] Send(011): 11 00 B0 D0 FF 12 00 00 01 01 00 Layer 6 [ 9:B.ft12cemi/Conn 4.218] SN: still waiting Layer 6 [ 1:main 4.218] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 4.282] RecvEMI(011): 2E 00 B0 D0 FF 12 00 00 01 01 00 Layer 2 [13:B.ft12cemi/ft12cemi 4.282] Confirmed Layer 0 [11:log/B.ft12cemi 4.282] send next Layer 6 [ 1:main 4.282] SN: OK Layer 6 [ 2:main/L 4.282] SN: OK L Layer 1 [13:B.ft12cemi/ft12cemi 4.302] RecvEMI(011): 29 00 B0 E0 11 05 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 4.302] Recv L_Data system from 1.1.5 to 0/0/0 hops: 06 T_DATA_XXX REQ A_IndividualAddress_Response Layer 0 [11:log/B.ft12cemi 4.302] Has Addr 1.1.5: no Layer 8 [ 1:main 4.302] unknown addr 1.1.5 Layer 0 [11:log/B.ft12cemi 4.302] Add Addr 1.1.5 Layer 1 [14:server/Server 4.303] Send(011): 29 00 B0 D0 11 05 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 4.303] Has Addr 1.1.5: yes Layer 6 [ 1:main 4.303] SN: OK Layer 6 [ 2:main/L 4.303] SN: OK L Layer 8 [23:router/ConnC 12.199] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 12.199] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 12.199] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 12.199] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 12.199] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 12.200] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_CONN CT_REQ Layer 1 [13:B.ft12cemi/ft12cemi 12.200] SendEMI(010): 11 00 B0 50 FF 12 11 05 00 80 Layer 1 [12:B.ft12cemi/ft12ser 12.200] Send(010): 11 00 B0 50 FF 12 11 05 00 80 Layer 6 [ 9:B.ft12cemi/Conn 12.200] SN: still waiting Layer 6 [ 1:main 12.200] SN: wait L Layer 8 [23:router/ConnC 12.216] found addr 15.15.18 Layer 6 [ 1:main 12.216] SN: wait L Layer 8 [23:router/ConnC 12.236] found addr 15.15.18 Layer 6 [ 1:main 12.236] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 12.259] RecvEMI(010): 2E 00 B0 50 FF 12 11 05 00 80 Layer 2 [13:B.ft12cemi/ft12cemi 12.259] Confirmed Layer 0 [11:log/B.ft12cemi 12.259] send next Layer 6 [ 1:main 12.259] SN: OK Layer 6 [ 2:main/L 12.259] SN: OK L Layer 0 [11:log/B.ft12cemi 12.259] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 12.259] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 12.259] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 12.260] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 12.260] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_DATA CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 12.260] SendEMI(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 12.260] Send(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 12.260] SN: still waiting Layer 6 [ 1:main 12.260] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 12.324] RecvEMI(011): 2E 00 B0 50 FF 12 11 05 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 12.324] Confirmed Layer 0 [11:log/B.ft12cemi 12.324] send next Layer 6 [ 1:main 12.324] SN: OK Layer 6 [ 2:main/L 12.324] SN: OK L Layer 0 [11:log/B.ft12cemi 12.324] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 12.324] Addr Check 0/0/0: yes Layer 0 [11:log/B.ft12cemi 12.324] Send L_Data system from 15.15.18 to 0/0/0 hops: 05 T_DATA XXX_REQ A_IndividualAddress_Read Layer 1 [13:B.ft12cemi/ft12cemi 12.324] SendEMI(011): 11 00 B0 D0 FF 12 00 00 01 01 00 Layer 1 [12:B.ft12cemi/ft12ser 12.324] Send(011): 11 00 B0 D0 FF 12 00 00 01 01 00 Layer 6 [ 9:B.ft12cemi/Conn 12.324] SN: still waiting Layer 6 [ 1:main 12.324] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 12.408] RecvEMI(011): 2E 00 B0 D0 FF 12 00 00 01 01 00 Layer 2 [13:B.ft12cemi/ft12cemi 12.408] Confirmed Layer 0 [11:log/B.ft12cemi 12.408] send next Layer 6 [ 1:main 12.408] SN: OK Layer 6 [ 2:main/L 12.408] SN: OK L Layer 1 [13:B.ft12cemi/ft12cemi 12.517] RecvEMI(011): 29 00 B0 E0 11 05 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 12.517] Recv L_Data system from 1.1.5 to 0/0/0 hops: 06 T_DATA_XX _REQ A_IndividualAddress_Response Layer 0 [11:log/B.ft12cemi 12.517] Has Addr 1.1.5: yes Layer 8 [ 9:B.ft12cemi/Conn 12.517] found addr 1.1.5 Layer 1 [14:server/Server 12.517] Send(011): 29 00 B0 D0 11 05 00 00 01 01 40 Layer 0 [11:log/B.ft12cemi 12.517] Has Addr 1.1.5: yes Layer 6 [ 1:main 12.517] SN: OK Layer 6 [ 2:main/L 12.517] SN: OK L Layer 8 [23:router/ConnC 12.617] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 12.617] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 12.617] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 12.617] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 12.617] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 12.617] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_DISC NNECT_REQ Layer 1 [13:B.ft12cemi/ft12cemi 12.617] SendEMI(010): 11 00 B0 50 FF 12 11 05 00 81 Layer 1 [12:B.ft12cemi/ft12ser 12.617] Send(010): 11 00 B0 50 FF 12 11 05 00 81 Layer 6 [ 9:B.ft12cemi/Conn 12.617] SN: still waiting Layer 6 [ 1:main 12.617] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 12.679] RecvEMI(010): 2E 00 B0 50 FF 12 11 05 00 81 Layer 2 [13:B.ft12cemi/ft12cemi 12.680] Confirmed Layer 0 [11:log/B.ft12cemi 12.680] send next Layer 6 [ 1:main 12.680] SN: OK Layer 6 [ 2:main/L 12.681] SN: OK L Layer 8 [23:router/ConnC 15.247] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 15.248] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 15.248] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 15.249] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 15.249] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 15.250] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_CONN CT_REQ Layer 1 [13:B.ft12cemi/ft12cemi 15.250] SendEMI(010): 11 00 B0 50 FF 12 11 05 00 80 Layer 1 [12:B.ft12cemi/ft12ser 15.250] Send(010): 11 00 B0 50 FF 12 11 05 00 80 Layer 6 [ 9:B.ft12cemi/Conn 15.250] SN: still waiting Layer 6 [ 1:main 15.250] SN: wait L Layer 8 [23:router/ConnC 15.267] found addr 15.15.18 Layer 6 [ 1:main 15.267] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 15.312] RecvEMI(010): 2E 00 B0 50 FF 12 11 05 00 80 Layer 2 [13:B.ft12cemi/ft12cemi 15.312] Confirmed Layer 0 [11:log/B.ft12cemi 15.312] send next Layer 6 [ 1:main 15.312] SN: OK Layer 6 [ 2:main/L 15.313] SN: OK L Layer 0 [11:log/B.ft12cemi 15.313] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 15.313] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 15.313] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 15.313] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 15.313] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_DATA CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 15.313] SendEMI(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 15.314] Send(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 15.314] SN: still waiting Layer 6 [ 1:main 15.314] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 15.377] RecvEMI(011): 2E 00 B0 50 FF 12 11 05 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 15.377] Confirmed Layer 0 [11:log/B.ft12cemi 15.377] send next Layer 6 [ 1:main 15.377] SN: OK Layer 6 [ 2:main/L 15.377] SN: OK L Layer 8 [23:router/ConnC 18.287] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 18.288] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 18.288] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 18.288] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 18.288] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 18.288] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_DATA CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 18.288] SendEMI(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 18.289] Send(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 18.289] SN: still waiting Layer 6 [ 1:main 18.289] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 18.351] RecvEMI(011): 2E 00 B0 50 FF 12 11 05 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 18.352] Confirmed Layer 0 [11:log/B.ft12cemi 18.352] send next Layer 6 [ 1:main 18.352] SN: OK Layer 6 [ 2:main/L 18.352] SN: OK L Layer 8 [23:router/ConnC 21.289] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 21.289] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 21.290] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 21.290] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 21.290] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 21.290] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_DATA CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 21.290] SendEMI(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 21.290] Send(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 21.291] SN: still waiting Layer 6 [ 1:main 21.291] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 21.354] RecvEMI(011): 2E 00 B0 50 FF 12 11 05 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 21.355] Confirmed Layer 0 [11:log/B.ft12cemi 21.355] send next Layer 6 [ 1:main 21.355] SN: OK Layer 6 [ 2:main/L 21.355] SN: OK L Layer 8 [23:router/ConnC 24.292] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 24.292] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 24.292] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 24.292] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 24.292] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 24.292] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_DATA CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 24.292] SendEMI(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 24.292] Send(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 24.292] SN: still waiting Layer 6 [ 1:main 24.292] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 24.353] RecvEMI(011): 2E 00 B0 50 FF 12 11 05 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 24.353] Confirmed Layer 0 [11:log/B.ft12cemi 24.353] send next Layer 6 [ 1:main 24.353] SN: OK Layer 6 [ 2:main/L 24.353] SN: OK L Layer 8 [23:router/ConnC 27.298] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 27.298] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 27.298] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 27.298] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 27.298] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 27.298] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_DISC NNECT_REQ Layer 1 [13:B.ft12cemi/ft12cemi 27.299] SendEMI(010): 11 00 B0 50 FF 12 11 05 00 81 Layer 1 [12:B.ft12cemi/ft12ser 27.299] Send(010): 11 00 B0 50 FF 12 11 05 00 81 Layer 6 [ 9:B.ft12cemi/Conn 27.299] SN: still waiting Layer 6 [ 1:main 27.299] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 27.361] RecvEMI(010): 2E 00 B0 50 FF 12 11 05 00 81 Layer 2 [13:B.ft12cemi/ft12cemi 27.361] Confirmed Layer 0 [11:log/B.ft12cemi 27.361] send next Layer 6 [ 1:main 27.361] SN: OK Layer 6 [ 2:main/L 27.362] SN: OK L Layer 8 [23:router/ConnC 27.815] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 27.815] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 27.815] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 27.815] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 27.815] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 27.815] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_CONN CT_REQ Layer 1 [13:B.ft12cemi/ft12cemi 27.815] SendEMI(010): 11 00 B0 50 FF 12 11 05 00 80 Layer 1 [12:B.ft12cemi/ft12ser 27.815] Send(010): 11 00 B0 50 FF 12 11 05 00 80 Layer 6 [ 9:B.ft12cemi/Conn 27.815] SN: still waiting Layer 6 [ 1:main 27.815] SN: wait L Layer 8 [23:router/ConnC 27.836] found addr 15.15.18 Layer 6 [ 1:main 27.836] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 27.875] RecvEMI(010): 2E 00 B0 50 FF 12 11 05 00 80 Layer 2 [13:B.ft12cemi/ft12cemi 27.875] Confirmed Layer 0 [11:log/B.ft12cemi 27.875] send next Layer 6 [ 1:main 27.875] SN: OK Layer 6 [ 2:main/L 27.875] SN: OK L Layer 0 [11:log/B.ft12cemi 27.876] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 27.876] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 27.876] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 27.876] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 27.876] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_DATA CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 27.876] SendEMI(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 27.876] Send(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 27.876] SN: still waiting Layer 6 [ 1:main 27.876] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 27.941] RecvEMI(011): 2E 00 B0 50 FF 12 11 05 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 27.941] Confirmed Layer 0 [11:log/B.ft12cemi 27.941] send next Layer 6 [ 1:main 27.941] SN: OK Layer 6 [ 2:main/L 27.941] SN: OK L Layer 8 [23:router/ConnC 30.846] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 30.847] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 30.847] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 30.848] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 30.848] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 30.848] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_DATA CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 30.849] SendEMI(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 30.849] Send(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 30.849] SN: still waiting Layer 6 [ 1:main 30.850] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 30.914] RecvEMI(011): 2E 00 B0 50 FF 12 11 05 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 30.914] Confirmed Layer 0 [11:log/B.ft12cemi 30.915] send next Layer 6 [ 1:main 30.915] SN: OK Layer 6 [ 2:main/L 30.915] SN: OK L Layer 8 [23:router/ConnC 33.901] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 33.902] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 33.902] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 33.902] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 33.902] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 33.902] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_DATA CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 33.902] SendEMI(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 33.902] Send(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 33.902] SN: still waiting Layer 6 [ 1:main 33.902] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 33.987] RecvEMI(011): 2E 00 B0 50 FF 12 11 05 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 33.987] Confirmed Layer 0 [11:log/B.ft12cemi 33.987] send next Layer 6 [ 1:main 33.987] SN: OK Layer 6 [ 2:main/L 33.987] SN: OK L Layer 8 [23:router/ConnC 36.879] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 36.880] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 36.880] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 36.880] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 36.880] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 36.880] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_DATA CONNECTED_REQ serno:00 A_DeviceDescriptor_Read Type:00 Layer 1 [13:B.ft12cemi/ft12cemi 36.880] SendEMI(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 1 [12:B.ft12cemi/ft12ser 36.880] Send(011): 11 00 B0 50 FF 12 11 05 01 43 00 Layer 6 [ 9:B.ft12cemi/Conn 36.880] SN: still waiting Layer 6 [ 1:main 36.880] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 37.004] RecvEMI(011): 2E 00 B0 50 FF 12 11 05 01 43 00 Layer 2 [13:B.ft12cemi/ft12cemi 37.004] Confirmed Layer 0 [11:log/B.ft12cemi 37.005] send next Layer 6 [ 1:main 37.005] SN: OK Layer 6 [ 2:main/L 37.005] SN: OK L Layer 8 [23:router/ConnC 39.873] found addr 15.15.18 Layer 0 [11:log/B.ft12cemi 39.873] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 39.873] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 39.873] Has Addr 15.15.18: no Layer 0 [11:log/B.ft12cemi 39.873] Has Addr 1.1.5: yes Layer 0 [11:log/B.ft12cemi 39.873] Send L_Data system from 15.15.18 to 1.1.5 hops: 05 T_DISC NNECT_REQ Layer 1 [13:B.ft12cemi/ft12cemi 39.873] SendEMI(010): 11 00 B0 50 FF 12 11 05 00 81 Layer 1 [12:B.ft12cemi/ft12ser 39.873] Send(010): 11 00 B0 50 FF 12 11 05 00 81 Layer 6 [ 9:B.ft12cemi/Conn 39.873] SN: still waiting Layer 6 [ 1:main 39.873] SN: wait L Layer 1 [13:B.ft12cemi/ft12cemi 39.933] RecvEMI(010): 2E 00 B0 50 FF 12 11 05 00 81 Layer 2 [13:B.ft12cemi/ft12cemi 39.933] Confirmed Layer 0 [11:log/B.ft12cemi 39.933] send next Layer 6 [ 1:main 39.933] SN: OK Layer 6 [ 2:main/L 39.933] SN: OK L
Zuletzt geändert von jeff25; 22.03.2017, 10:54.Kommentar
Kommentar