Mobotix Türstation T24

[Warichet]

Did you something in order to enable this signal ?

In the admin menu "Assign wires"

One item is still not clear, the lighting, did you manage to make iLi work ? does it switch off the camera light and/or the display module ?

[Warichet]

Open the Webpage of the Mobotix, on the left side there are buttons eg. for light and Door.

Oh well, stands in front of me and didn't see it
Thank you

When I hit the button, I hear the DO relay click, but don't see the GA toggle.
Did you something in order to enable this signal ?

[Jockel]

In order to test this, I want to activate those 3 signals internally, but don't know how yet. So I'm looking for a very simple method, just to test the wiring and see the effect in the corresponding GA.

Open the Webpage of the Mobotix, on the left side there are buttons eg. for light and Door.

[Warichet]

When viewing with a browser there are buttons as well

Sounds interesting, can you elaborate a little bit, please ?

I guess you should be able to bind these signals to other events

That's what I'm willing to test, right now.
I've modified the schema of page 114/148, removed almost everything, included the external power supply (12VAC) and connected eLi, iLi and DO to the inputs of an US/U 4.2
In order to test this, I want to activate those 3 signals internally, but don't know how yet. So I'm looking for a very simple method, just to test the wiring and see the effect in the corresponding GA.

Thank you

[Jockel]

When viewing with a browser there are buttons as well und I guess you should be able to bind these signals to other events, but I have never tested this.

[Warichet]

Is this anyhow related to the "iLi" signal from the IO1 module ? or is the iLi only for lighting the camera module ?

A little "up"
Anyone has an idea about how the T24 lighting works ?

Also, I'm testing my setup on the table before installing it at the front door. I want to implement Jockel's idea and I wonder how to activate eLi, iLi and DO. Is this only possible when a communication is established and DTMF tones are generated from the internal SIP phone ?
A pointer to the chapter in the doc would be appreciated.

[rolandm]

Hallo,

Soweit ich das sehe, geht das.

Im Setup-Menü in die Ereignissteuerung.
Dann in die EreignisÜbersicht.

Im Bereich "interene Ereignisse" sind hier schon mal Profile angelegt.

Im Bereich "Aktionsgruppen-Übersicht" eine neue Aktionsgruppe anlegen.
Dann auf bearbeiten.

Der Gruppe einen sinnvollen Nemen geben.
Als zweites in der Ereignisauswahl das passende Ereignis wählen.

Jetzt noch eine neue Aktion anlegen, und die entsprechende Netzwerkmeldung wählen.

Eventuell im Admin Menü ein Profil für eine passende Netwerkmeldung anlegen.

[goeran]

Hallo zusammen,

ich haette zu der T24 in Verbindung mit dem Mobotix Keypad eine Frage, die ich auch auf der Mobotix-Webseite und in den PDF-Dokumenten nicht klaeren konnte.

Kann die Kamera mit einem ueber MX-Bus angeschlossenem Mobotix-Keypad auch Netzwerkmeldungen aufgrund von eingegebenen PINs oder erkannten RFID-Karten senden? Oder werden diese nur ueber das I/O-Modul an deren Schaltausgaengen wirksam?

Bisher kenne ich nur die "normalen" Kameras (MX12 usw.), welche ja aufgrund von diversen Events Meldungen ueber IP versenden koennen.

Ziel der Uebung waere, mit einem gesonderten PIN oder einer zweiten RFID-Karte ueber eine Logik eines Gira HS/FS z.B. das Garagentor zu oeffnen oder die Alarmanlage zu aktivieren/deaktivieren oder oder ...

Dazu moechte ich, wie gesagt, nur Netzwerkmeldungen (z.B. UDP-Telegramme) verwenden und nicht die Schaltausgaenge, um vor Sabotage besser geschuetzt zu sein.

[Warichet]

Kann man das konfiguren, das sich die Beleuchtung auch abschaltet oder ist die beleuchtung gedacht das sie immer leuchtet?

I've the same question (although I seem to remember different answers)

Is this anyhow related to the "iLi" signal from the IO1 module ? or is the iLi only for lighting the camera module ?

[danczi]

Beleuchtung von Infomodul

Hallo,

ich habe eine Mobotix T24 mit normalen Infomodul. Habe das Infomodul an den MX-Bus der kamera angeschlossen.

Im Menüpunkt MxBus-Module verwalten sehe jetzt auch "Beleuchtung".

Kann man das konfiguren, das sich die Beleuchtung auch abschaltet oder ist die beleuchtung gedacht das sie immer leuchtet?

Danke im Voraus.

lg Daniel

[Warichet]

where is the connection between PIR and camera?

AFAIK, there is no connection between the PIR and the camera.
You need the IO1 option module, this module has provision for an external PIR signal (input)
For the details, have a look at page 114-115/148 of the System Manual part 1

[thommymail]

1. The PIR (that you mean) is clearly an INPUT fron an external PIR

Did you send an IP Message from the HS Server? Or where is the connection between PIR and camera?

[sysman]

not so much, as you can specify the window area. And there is a lot of light , when the PIR / Lamp is switched on :-)

It depends a bit on the sensity from the PIR.

/dirk

[Warichet]

1. The PIR (that you mean) is clearly an INPUT fron an external PIR

OK, fine

2. If you would like to use the camera as motion detection - that is possible. (bot only motion detection via Video

OK, fine. I've already done such a setup with another camera, and my experience is rather bad, close to unusable due to false triggerings i.e. external disturbance (birds too close, car headlights, lightnings)

I have a lamp with PIR, this is going on when someone comes to close to my door (10m)

That looks like a viable setup. Any false triggering yet ?

[sysman]

Hi Warichet,

upps will correct my answer a bit:

1. The PIR (that you mean) is clearly an INPUT fron an external PIR.

2. If you would like to use the camera as motion detection - that is possible.
(bot only motion detection via Video - no infrared, if its not come from external sources). In the Software you can setup "motion detection areas" in the cam pic. if there is any motion the camera could send you f.e. ip message. You can specify diffrent areas and diffrent reations.
Have in mind, that this is not working when there is not enough light, because the cam can not "see" the motion :-)

Practical setup:
I have a lamp with PIR, this is going on when someone comes to close to my door (10m) . I this person comes more closer (8m) , the cam detects the motion and send me a mail and save the pic on HS/FS and NAS as well.
as in have only network cable on my door, the Bell button send only an IP message to my network (bell setup via IP) and the sip client try to reach me (if iam not at home, Szene via HS). In case of activatet Alarmsystem the cam stores the video on the NAS.

hope this helps