KNX node for node-red

[johannesbonn]

Thank you, I will give it a try in the next days.

[martiko]

Hi,
I have created the GA CSV-Export exactely as shown in the Video and pasted it for import in the node-configuration.
As not all GA‘s have a DP (yet), I selected to ignore these GA‘s and proceed, so I got quite a lot of warnings during deploy.

But unfortunately the auto-complete does not work, so it looks as if the import did not work. Any hint, how I could find the Problem?

BTW: KNX Ultimate is working great, very good work!

[TheMax74]

Hi Martiko
I strongly suggest you to fix the datapoints, then export again the CSV. Datapoints are VITAL for all visualization and management system.
I'ts a matter of minutes to set the right datapoints.
Otherwise you need to change each KNX-Ultimate node, by setting the right datapoint. Every time you add a new KNX Node. This is very frustrating.
"Ignore and continue" was requested by an user. I added it, but i've made a great mistake, beause then you have a totally unstable installation, with random values outputted by nodes and wrong numeric visualization if you use a visu, like for example Smartvisu.
I plan to remove the "Ignore and continue" :-)

[TheMax74]

If you wish, you can send me your knxproj file. I'll set the datapoints for you. I've just some new good music to hear, in the meantime.

[martiko]

I am still in the stage of testing with my KNX-Board, but I have already created most of the GA‘s I plan to use in my final implementation.
but as this is still work im progress and I don‘t even know or own the Final devices, it‘s not yet the right time to define all DPs (as I plan to use Copy&Paste for the GA-Structure).
But I don‘t understand why the Import should not work for all GA‘s which are already defined with a DP (so for all, which I have already in use for testing). So to my mind, it would be a step back, if you remove this feature.
but ok, for the Moment, it is working without the import and manual DP definition....

PS: You surely don‘t need to set the DP‘s for me... but thanks for the offer ;-)
PPS: Mi dispiacce, che non parle bene italiano, ma mille grazie per l‘eccelente lavoro!

[TheMax74]

Hello Martiko
ok this make sense, for testing. I already found why you don't see the device name in the list. Can you send me, please, your CSV file? You can send it per PM or via mail info@supergiovane.it
I'll make immediately a new version, to allow you to import and test your system.

[martiko]

Hello Martiko
ok this make sense, for testing. I already found why you don't see the device name in the list. Can you send me, please, your CSV file? You can send it per PM or via mail info@supergiovane.it
I'll make immediately a new version, to allow you to import and test your system.

Hi,
i've just sent you the file via e-mail...

Thanks in advance!

[TheMax74]

Ok, received it. The new version will be out in 30 minutes or so.
Ciao!!

[martiko]

Grazie, ciao!

[TheMax74]

Hi Martiko,
V. 1.1.38 is out with changed behaviour in importing CSV file. A fake Datapoint 1.001 will now be set for GA with unset datapoint.
You should see the new version in minutes.

[martiko]

Hi TheMax,
works great, thanks a lot!

[martiko]

Hi Martiko,
V. 1.1.38 is out with changed behaviour in importing CSV file. A fake Datapoint 1.001 will now be set for GA with unset datapoint.
You should see the new version in minutes.

Your node is really awsome! For testing I currently use the universal mode which is - in conjunction with the imported GA-File - a great way to implement a Bus-Monitor. I currently dump the output to a file so that I have an overview what data is retrieved and can be used for entry in an InfluxDB.

Probably I will even use this mode to "catch all" Traffic and automate the Filtering and Storing in InfluxDB. I think this is easier than building single Flows for each data I want to archive. So the testing shows that I need to rework my naming conventions for the GAs (and even the names of the middle groups) including Separators, so that I can easyly split these and use them for tagging.

Un altra volta, mille grazie!!!

[Maexle]

Good Morning TheMax,

im trying out your program.

I installed it on my RasPi (has knxd installed an works --> i can make changes on the KNX over SSH for example).
NodeRed is running on the Pi, i can access in Browser from my PC

Could you help me make the right settings to get connection between your software and KNX


Thank you

[TheMax74]

Hi Maexle,
Please tell me, the make/model of your KNX/IP router.

[Maexle]

that was fast - wow

MDT SCN-IP000.02


Properties
Gateway -- IP of the Interface on LAN or IP of RasPi