UZSU - Neue Version von Onkelandy

[schuma]

Wie gross ist dein Fenster?
Ich kann das mit Firefox 62 nur nachvollziehen, wenn das Fenster zu schmal wird. Aber in diesem Fall ist es kein komisches Umbrechen, sondern ein gewolltes.

Das Fenster ist Vollbild. Also 1366x768.

Ich habe es gerade noch einmal getestet....

Bild nach dem Öffnen der UZSU:
2018_10_19_17_41_25_SmartVisu2.9.png
Bild nach dem Öffnen einer Exp Zeile:
2018_10_19_17_42_04_.png
Bild nach dem Schließen der Exp. Zeile:
2018_10_19_17_42_34_.png
Der Scrollbalken bleibt also nach dem Schließen der Exp. Zeile erhalten. Und auch der Umbruch.
smai Du musst bei Deinem Test warscheinlich mehrere Einträge anlegen, so das auch eine Bildlaufleiste ins Spiel kommt.
In diesem Beispiel sind es 6 Einträge.

Das passiert im IE auch so. Aber im Chrome ist es ok. Da wird das Fenster um die breite der Laufleiste größer!

[schuma]

Onkelandy Ich habe zufällig in den Debuglog gesehen, dass manchmal als Value eine 0 gesetzt wird manchmal eine 0.0.
Nur mal zur Sicherheit die Frage, ob daraus ein Problem entstehen könnte?

2018-10-20  09:30:00 DEBUG    plugins.uzsu.uzsu_Setup.Schalter.BAD_UPRadio.schaltuhr uzsu active entry for item Setup.Schalter.BAD_UPRadio.schaltuhr with datetime 2018-10-21 09:30:00+02:00, value 1 and tzinfo tzfile('/usr/share/zoneinfo/Europe/Berlin')
2018-10-20  09:30:00 DEBUG    plugins.uzsu.uzsu_Setup.Schalter.BAD_UPRadio.schaltuhr uzsu active entry for item Setup.Schalter.BAD_UPRadio.schaltuhr keep 2018-10-20 22:15:00+02:00, value 0 and tzinfo tzfile('/usr/share/zoneinfo/Europe/Berlin')
2018-10-20  09:30:00 DEBUG    plugins.uzsu.uzsu_Setup.Schalter.BAD_UPRadio.schaltuhr will add scheduler named uzsu_Setup.Schalter.BAD_UPRadio.schaltuhr with datetime 2018-10-20 22:15:00+02:00 and tzinfo tzfile('/usr/share/zoneinfo/Europe/Berlin') and value 0.0

P.S. Bis jetzt keine Errors mehr im Log.... Ich gucke mir das weiter jeden Tag an...

[Onkelandy]

schuma Sobald interpoliert wird, wird automatisch ein float erstellt. Die ersten zwei Log-Einträge betreffen nur die Werte aus dem Dict bzw. dem im Widget angegebenen Wert, der letzte Eintrag den Wert, der tatsächlich geschedulet wird.

[schuma]

Onkelandy Ich habe das Debuglog nun wieder abgeschaltet. Keine Fehler in der gesamten Zeit!
Weiß auch nicht was da mal war....

[schloessl]

Ich wollte mich auf dem Raspi3 aktuelle Image in UZSU einarbeiten, scheitere jedoch an pip3 install scipy!
Was kann ich tun?

You are using pip version 18.0, however version 18.1 is available, habe ich installiert, Meldung bleibt allerdings

2018-10-26 14:42:17 WARNING __main__ -------------------- Init SmartHomeNG 1.5.1.master (cc1288de) --------------------
2018-10-26 14:42:17 WARNING __main__ Running in Python interpreter 'v3.5.3 final' on linux platform

2018-10-26 16:52:37 WARNING plugins.uzsu Unable to import Python package 'scipy' which is necessary for interpolation.
2018-10-26 16:52:37 ERROR lib.plugin Plugins: Plugin 'uzsu' initialization failed, plugin not loaded

[schuma]

Hast Du vorher ein

sudo apt-get update
sudo apt-get upgrade

gemacht?

[schloessl]

Hallo schuma,
Nein vorher kein update + upgrade.

Aber jetzt: Fehler bleibt.
Ich lösche den vorherigen code!

smarthome@SmartHomeNG ~]$ sudo pip3 install scipy
Looking in indexes: [URL]https://pypi.org/simple[/URL], [URL]https://www.piwheels.org/simple[/URL]
Collecting scipy
Using cached [URL="https://www.piwheels.org/simple/scipy/scipy-1.1.0-cp35-cp35m-linux_armv7l.whl"]https://www.piwheels.org/simple/scip...nux_armv7l.whl[/URL]
Collecting numpy>=1.8.2 (from scipy)
Using cached [URL="https://files.pythonhosted.org/packages/83/6b/d03277eacf113697675cd659086a4dcf9472108e2f1a83884c0271bdca46/numpy-1.15.3.zip"]https://files.pythonhosted.org/packa...mpy-1.15.3.zip[/URL]
Building wheels for collected packages: numpy
Running setup.py bdist_wheel for numpy ... error
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-pvclqp_z/numpy/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /tmp/pip-wheel-ls24sgl0 --python-tag cp35:
Running from numpy source directory.
blas_opt_info:
blas_mkl_info:
customize UnixCCompiler
libraries mkl_rt not found in ['/usr/local/lib', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

blis_info:
customize UnixCCompiler
libraries blis not found in ['/usr/local/lib', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

openblas_info:
customize UnixCCompiler
customize UnixCCompiler
libraries openblas not found in ['/usr/local/lib', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

atlas_3_10_blas_threads_info:
Setting PTATLAS=ATLAS
customize UnixCCompiler
libraries tatlas not found in ['/usr/local/lib', '/usr/lib/atlas-base', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

atlas_3_10_blas_info:
customize UnixCCompiler
libraries satlas not found in ['/usr/local/lib', '/usr/lib/atlas-base', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

atlas_blas_threads_info:
Setting PTATLAS=ATLAS
customize UnixCCompiler
libraries ptf77blas,ptcblas,atlas not found in ['/usr/local/lib', '/usr/lib/atlas-base', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

atlas_blas_info:
customize UnixCCompiler
get_default_fcompiler: matching types: '['gnu95', 'intel', 'lahey', 'pg', 'absoft', 'nag', 'vast', 'compaq', 'intele', 'intelem', 'gnu', 'g95', 'pathf95', 'nagfor']'
customize Gnu95FCompiler
Found executable /usr/bin/gfortran
customize Gnu95FCompiler
customize Gnu95FCompiler using config
compiling '_configtest.c':

/* This file is generated from numpy/distutils/system_info.py */
void ATL_buildinfo(void);
int main(void) {
ATL_buildinfo();
return 0;
}

C compiler: arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.5-6waWnr/python3.5-3.5.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC

compile options: '-c'
arm-linux-gnueabihf-gcc: _configtest.c
arm-linux-gnueabihf-gcc -pthread _configtest.o -L/usr/lib/atlas-base -lf77blas -lcblas -latlas -o _configtest
ATLAS version 3.10.3 built by root on Thu Aug 25 09:31:13 UTC 2016:
UNAME : Linux plugwash.raspbian.lan 3.2.0-4-mx5 #1 Debian 3.2.39-2 armv7l GNU/Linux
INSTFLG : -1 0 -a 1 -l 1
ARCHDEFS : -DATL_OS_Linux -DATL_ARCH_GENERIC -DATL_GAS_ARM
F2CDEFS : -DAdd_ -DF77_INTEGER=int -DStringSunStyle
CACHEEDGE: 65536
F77 : /usr/bin/gfortran, version GNU Fortran (Raspbian 6.1.1-11+rpi1) 6.1.1 20160802
F77FLAGS : -O -fPIC
SMC : /usr/bin/gcc-6, version gcc-6 (Raspbian 6.1.1-11+rpi1) 6.1.1 20160802
SMCFLAGS : -O -fomit-frame-pointer -fPIC
SKC : /usr/bin/gcc-6, version gcc-6 (Raspbian 6.1.1-11+rpi1) 6.1.1 20160802
SKCFLAGS : -O -fomit-frame-pointer -fPIC
success!
removing: _configtest.c _configtest.o _configtest.o.d _configtest
customize UnixCCompiler
customize UnixCCompiler
FOUND:
library_dirs = ['/usr/lib/atlas-base']
include_dirs = ['/usr/include/atlas']
libraries = ['f77blas', 'cblas', 'atlas', 'f77blas', 'cblas']
define_macros = [('HAVE_CBLAS', None), ('ATLAS_INFO', '""3.10.3""')]
language = c

accelerate_info:
NOT AVAILABLE

FOUND:
library_dirs = ['/usr/lib/atlas-base']
include_dirs = ['/usr/include/atlas']
libraries = ['f77blas', 'cblas', 'atlas', 'f77blas', 'cblas']
define_macros = [('HAVE_CBLAS', None), ('ATLAS_INFO', '""3.10.3""')]
language = c

/bin/sh: 1: svnversion: not found
non-existing path in 'numpy/distutils': 'site.cfg'
/bin/sh: 1: svnversion: not found
F2PY Version 2
lapack_opt_info:
lapack_mkl_info:
customize UnixCCompiler
libraries mkl_rt not found in ['/usr/local/lib', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

openblas_lapack_info:
customize UnixCCompiler
customize UnixCCompiler
libraries openblas not found in ['/usr/local/lib', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

openblas_clapack_info:
customize UnixCCompiler
customize UnixCCompiler
libraries openblas,lapack not found in ['/usr/local/lib', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

atlas_3_10_threads_info:
Setting PTATLAS=ATLAS
customize UnixCCompiler
libraries tatlas,tatlas not found in /usr/local/lib
customize UnixCCompiler
libraries lapack_atlas not found in /usr/local/lib
customize UnixCCompiler
libraries tatlas,tatlas not found in /usr/lib/atlas-base
customize UnixCCompiler
customize UnixCCompiler
libraries tatlas,tatlas not found in /usr/lib
customize UnixCCompiler
customize UnixCCompiler
libraries tatlas,tatlas not found in /usr/lib/arm-linux-gnueabihf
customize UnixCCompiler
libraries lapack_atlas not found in /usr/lib/arm-linux-gnueabihf
<class 'numpy.distutils.system_info.atlas_3_10_threads_in fo'>
NOT AVAILABLE

atlas_3_10_info:
customize UnixCCompiler
libraries satlas,satlas not found in /usr/local/lib
customize UnixCCompiler
libraries lapack_atlas not found in /usr/local/lib
customize UnixCCompiler
libraries satlas,satlas not found in /usr/lib/atlas-base
customize UnixCCompiler
customize UnixCCompiler
libraries satlas,satlas not found in /usr/lib
customize UnixCCompiler
customize UnixCCompiler
libraries satlas,satlas not found in /usr/lib/arm-linux-gnueabihf
customize UnixCCompiler
libraries lapack_atlas not found in /usr/lib/arm-linux-gnueabihf
<class 'numpy.distutils.system_info.atlas_3_10_info'>
NOT AVAILABLE

atlas_threads_info:
Setting PTATLAS=ATLAS
customize UnixCCompiler
libraries ptf77blas,ptcblas,atlas not found in /usr/local/lib
customize UnixCCompiler
libraries lapack_atlas not found in /usr/local/lib
customize UnixCCompiler
libraries ptf77blas,ptcblas,atlas not found in /usr/lib/atlas-base
customize UnixCCompiler
customize UnixCCompiler
libraries ptf77blas,ptcblas,atlas not found in /usr/lib
customize UnixCCompiler
customize UnixCCompiler
libraries ptf77blas,ptcblas,atlas not found in /usr/lib/arm-linux-gnueabihf
customize UnixCCompiler
libraries lapack_atlas not found in /usr/lib/arm-linux-gnueabihf
<class 'numpy.distutils.system_info.atlas_threads_info'>
NOT AVAILABLE

atlas_info:
customize UnixCCompiler
libraries f77blas,cblas,atlas not found in /usr/local/lib
customize UnixCCompiler
libraries lapack_atlas not found in /usr/local/lib
customize UnixCCompiler
customize UnixCCompiler
customize UnixCCompiler
<class 'numpy.distutils.system_info.atlas_info'>
customize UnixCCompiler
customize UnixCCompiler
customize UnixCCompiler
FOUND:
library_dirs = ['/usr/lib/atlas-base/atlas', '/usr/lib/atlas-base']
include_dirs = ['/usr/include/atlas']
libraries = ['lapack', 'f77blas', 'cblas', 'atlas', 'f77blas', 'cblas']
define_macros = [('ATLAS_INFO', '""3.10.3""')]
language = f77

FOUND:
library_dirs = ['/usr/lib/atlas-base/atlas', '/usr/lib/atlas-base']
include_dirs = ['/usr/include/atlas']
libraries = ['lapack', 'f77blas', 'cblas', 'atlas', 'f77blas', 'cblas']
define_macros = [('ATLAS_INFO', '""3.10.3""')]
language = f77

/usr/lib/python3.5/distutils/dist.py:261: UserWarning: Unknown distribution option: 'define_macros'
warnings.warn(msg)
running bdist_wheel
running build
running config_cc
unifing config_cc, config, build_clib, build_ext, build commands --compiler options
running config_fc
unifing config_fc, config, build_clib, build_ext, build commands --fcompiler options
running build_src
build_src
building py_modules sources
creating build
creating build/src.linux-armv7l-3.5
creating build/src.linux-armv7l-3.5/numpy
creating build/src.linux-armv7l-3.5/numpy/distutils
building library "npymath" sources
get_default_fcompiler: matching types: '['gnu95', 'intel', 'lahey', 'pg', 'absoft', 'nag', 'vast', 'compaq', 'intele', 'intelem', 'gnu', 'g95', 'pathf95', 'nagfor']'
customize Gnu95FCompiler
customize Gnu95FCompiler
customize Gnu95FCompiler using config
C compiler: arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.5-6waWnr/python3.5-3.5.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC

compile options: '-Inumpy/core/src/private -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/usr/include/python3.5m -c'
arm-linux-gnueabihf-gcc: _configtest.c
arm-linux-gnueabihf-gcc -pthread _configtest.o -o _configtest
success!
removing: _configtest.c _configtest.o _configtest.o.d _configtest
C compiler: arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.5-6waWnr/python3.5-3.5.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC

compile options: '-Inumpy/core/src/private -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/usr/include/python3.5m -c'
arm-linux-gnueabihf-gcc: _configtest.c
_configtest.c:1:5: warning: conflicting types for built-in function ‘exp’
int exp (void);
^~~
arm-linux-gnueabihf-gcc -pthread _configtest.o -o _configtest
_configtest.o: In function `main':
/tmp/pip-install-pvclqp_z/numpy/_configtest.c:6: undefined reference to `exp'
collect2: error: ld returned 1 exit status
_configtest.o: In function `main':
/tmp/pip-install-pvclqp_z/numpy/_configtest.c:6: undefined reference to `exp'
collect2: error: ld returned 1 exit status
failure.
removing: _configtest.c _configtest.o _configtest.o.d
C compiler: arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.5-6waWnr/python3.5-3.5.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC

compile options: '-Inumpy/core/src/private -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/usr/include/python3.5m -c'
arm-linux-gnueabihf-gcc: _configtest.c
_configtest.c:1:5: warning: conflicting types for built-in function ‘exp’
int exp (void);
^~~
arm-linux-gnueabihf-gcc -pthread _configtest.o -lm -o _configtest
success!
removing: _configtest.c _configtest.o _configtest.o.d _configtest
creating build/src.linux-armv7l-3.5/numpy/core
creating build/src.linux-armv7l-3.5/numpy/core/src
creating build/src.linux-armv7l-3.5/numpy/core/src/npymath
conv_template:> build/src.linux-armv7l-3.5/numpy/core/src/npymath/npy_math_internal.h
adding 'build/src.linux-armv7l-3.5/numpy/core/src/npymath' to include_dirs.
conv_template:> build/src.linux-armv7l-3.5/numpy/core/src/npymath/ieee754.c
conv_template:> build/src.linux-armv7l-3.5/numpy/core/src/npymath/npy_math_complex.c
None - nothing done with h_files = ['build/src.linux-armv7l-3.5/numpy/core/src/npymath/npy_math_internal.h']
building library "npysort" sources
creating build/src.linux-armv7l-3.5/numpy/core/src/npysort
conv_template:> build/src.linux-armv7l-3.5/numpy/core/src/npysort/quicksort.c
conv_template:> build/src.linux-armv7l-3.5/numpy/core/src/npysort/mergesort.c
conv_template:> build/src.linux-armv7l-3.5/numpy/core/src/npysort/heapsort.c
creating build/src.linux-armv7l-3.5/numpy/core/src/private
conv_template:> build/src.linux-armv7l-3.5/numpy/core/src/private/npy_partition.h
adding 'build/src.linux-armv7l-3.5/numpy/core/src/private' to include_dirs.
conv_template:> build/src.linux-armv7l-3.5/numpy/core/src/npysort/selection.c
conv_template:> build/src.linux-armv7l-3.5/numpy/core/src/private/npy_binsearch.h
conv_template:> build/src.linux-armv7l-3.5/numpy/core/src/npysort/binsearch.c
None - nothing done with h_files = ['build/src.linux-armv7l-3.5/numpy/core/src/private/npy_partition.h', 'build/src.linux-armv7l-3.5/numpy/core/src/private/npy_binsearch.h']
building extension "numpy.core._dummy" sources
Generating build/src.linux-armv7l-3.5/numpy/core/include/numpy/config.h
C compiler: arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.5-6waWnr/python3.5-3.5.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC

compile options: '-Inumpy/core/src/private -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/usr/include/python3.5m -c'
arm-linux-gnueabihf-gcc: _configtest.c
_configtest.c:1:20: fatal error: Python.h: No such file or directory
#include <Python.h>
^
compilation terminated.
_configtest.c:1:20: fatal error: Python.h: No such file or directory
#include <Python.h>
^
compilation terminated.
failure.
removing: _configtest.c _configtest.o
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-install-pvclqp_z/numpy/setup.py", line 403, in <module>
setup_package()
File "/tmp/pip-install-pvclqp_z/numpy/setup.py", line 395, in setup_package
setup(**metadata)
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/core.py", line 169, in setup
return old_setup(**new_attr)
File "/usr/local/lib/python3.5/dist-packages/setuptools/__init__.py", line 131, in setup
return distutils.core.setup(**attrs)
File "/usr/lib/python3.5/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.5/distutils/dist.py", line 955, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/usr/local/lib/python3.5/dist-packages/wheel/bdist_wheel.py", line 202, in run
self.run_command('build')
File "/usr/lib/python3.5/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/command/build.py", line 47, in run
old_build.run(self)
File "/usr/lib/python3.5/distutils/command/build.py", line 135, in run
self.run_command(cmd_name)
File "/usr/lib/python3.5/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/command/build_src.py", line 148, in run
self.build_sources()
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/command/build_src.py", line 165, in build_sources
self.build_extension_sources(ext)
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/command/build_src.py", line 324, in build_extension_sources
sources = self.generate_sources(sources, ext)
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/command/build_src.py", line 377, in generate_sources
source = func(extension, build_dir)
File "numpy/core/setup.py", line 422, in generate_config_h
moredefs, ignored = cocache.check_types(config_cmd, ext, build_dir)
File "numpy/core/setup.py", line 48, in check_types
out = check_types(*a, **kw)
File "numpy/core/setup.py", line 281, in check_types
"install {0}-dev|{0}-devel.".format(python))
SystemError: Cannot compile 'Python.h'. Perhaps you need to install python-dev|python-devel.

----------------------------------------
Failed building wheel for numpy
Running setup.py clean for numpy
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-pvclqp_z/numpy/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" clean --all:
Running from numpy source directory.

`setup.py clean` is not supported, use one of the following instead:

- `git clean -xdf` (cleans all files)
- `git clean -Xdf` (cleans all versioned files, doesn't touch
files that aren't checked into the git repo)

Add `--force` to your command to use it anyway if you must (unsupported).


----------------------------------------
Failed cleaning build dir for numpy
Failed to build numpy
Installing collected packages: numpy, scipy
Running setup.py install for numpy ... error
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-pvclqp_z/numpy/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-record-nos7wynx/install-record.txt --single-version-externally-managed --compile:
Running from numpy source directory.

Note: if you need reliable uninstall behavior, then install
with pip instead of using `setup.py install`:

- `pip install .` (from a git repo or downloaded source
release)
- `pip install numpy` (last NumPy release on PyPi)


blas_opt_info:
blas_mkl_info:
customize UnixCCompiler
libraries mkl_rt not found in ['/usr/local/lib', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

blis_info:
customize UnixCCompiler
libraries blis not found in ['/usr/local/lib', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

openblas_info:
customize UnixCCompiler
customize UnixCCompiler
libraries openblas not found in ['/usr/local/lib', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

atlas_3_10_blas_threads_info:
Setting PTATLAS=ATLAS
customize UnixCCompiler
libraries tatlas not found in ['/usr/local/lib', '/usr/lib/atlas-base', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

atlas_3_10_blas_info:
customize UnixCCompiler
libraries satlas not found in ['/usr/local/lib', '/usr/lib/atlas-base', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

atlas_blas_threads_info:
Setting PTATLAS=ATLAS
customize UnixCCompiler
libraries ptf77blas,ptcblas,atlas not found in ['/usr/local/lib', '/usr/lib/atlas-base', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

atlas_blas_info:
customize UnixCCompiler
get_default_fcompiler: matching types: '['gnu95', 'intel', 'lahey', 'pg', 'absoft', 'nag', 'vast', 'compaq', 'intele', 'intelem', 'gnu', 'g95', 'pathf95', 'nagfor']'
customize Gnu95FCompiler
Found executable /usr/bin/gfortran
customize Gnu95FCompiler
customize Gnu95FCompiler using config
compiling '_configtest.c':

/* This file is generated from numpy/distutils/system_info.py */
void ATL_buildinfo(void);
int main(void) {
ATL_buildinfo();
return 0;
}

C compiler: arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.5-6waWnr/python3.5-3.5.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC

compile options: '-c'
arm-linux-gnueabihf-gcc: _configtest.c
arm-linux-gnueabihf-gcc -pthread _configtest.o -L/usr/lib/atlas-base -lf77blas -lcblas -latlas -o _configtest
ATLAS version 3.10.3 built by root on Thu Aug 25 09:31:13 UTC 2016:
UNAME : Linux plugwash.raspbian.lan 3.2.0-4-mx5 #1 Debian 3.2.39-2 armv7l GNU/Linux
INSTFLG : -1 0 -a 1 -l 1
ARCHDEFS : -DATL_OS_Linux -DATL_ARCH_GENERIC -DATL_GAS_ARM
F2CDEFS : -DAdd_ -DF77_INTEGER=int -DStringSunStyle
CACHEEDGE: 65536
F77 : /usr/bin/gfortran, version GNU Fortran (Raspbian 6.1.1-11+rpi1) 6.1.1 20160802
F77FLAGS : -O -fPIC
SMC : /usr/bin/gcc-6, version gcc-6 (Raspbian 6.1.1-11+rpi1) 6.1.1 20160802
SMCFLAGS : -O -fomit-frame-pointer -fPIC
SKC : /usr/bin/gcc-6, version gcc-6 (Raspbian 6.1.1-11+rpi1) 6.1.1 20160802
SKCFLAGS : -O -fomit-frame-pointer -fPIC
success!
removing: _configtest.c _configtest.o _configtest.o.d _configtest
customize UnixCCompiler
customize UnixCCompiler
FOUND:
library_dirs = ['/usr/lib/atlas-base']
language = c
include_dirs = ['/usr/include/atlas']
define_macros = [('HAVE_CBLAS', None), ('ATLAS_INFO', '""3.10.3""')]
libraries = ['f77blas', 'cblas', 'atlas', 'f77blas', 'cblas']

accelerate_info:
NOT AVAILABLE

FOUND:
library_dirs = ['/usr/lib/atlas-base']
language = c
include_dirs = ['/usr/include/atlas']
define_macros = [('HAVE_CBLAS', None), ('ATLAS_INFO', '""3.10.3""')]
libraries = ['f77blas', 'cblas', 'atlas', 'f77blas', 'cblas']

/bin/sh: 1: svnversion: not found
non-existing path in 'numpy/distutils': 'site.cfg'
/bin/sh: 1: svnversion: not found
F2PY Version 2
lapack_opt_info:
lapack_mkl_info:
customize UnixCCompiler
libraries mkl_rt not found in ['/usr/local/lib', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

openblas_lapack_info:
customize UnixCCompiler
customize UnixCCompiler
libraries openblas not found in ['/usr/local/lib', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

openblas_clapack_info:
customize UnixCCompiler
customize UnixCCompiler
libraries openblas,lapack not found in ['/usr/local/lib', '/usr/lib', '/usr/lib/arm-linux-gnueabihf']
NOT AVAILABLE

atlas_3_10_threads_info:
Setting PTATLAS=ATLAS
customize UnixCCompiler
libraries tatlas,tatlas not found in /usr/local/lib
customize UnixCCompiler
libraries lapack_atlas not found in /usr/local/lib
customize UnixCCompiler
libraries tatlas,tatlas not found in /usr/lib/atlas-base
customize UnixCCompiler
customize UnixCCompiler
libraries tatlas,tatlas not found in /usr/lib
customize UnixCCompiler
customize UnixCCompiler
libraries tatlas,tatlas not found in /usr/lib/arm-linux-gnueabihf
customize UnixCCompiler
libraries lapack_atlas not found in /usr/lib/arm-linux-gnueabihf
<class 'numpy.distutils.system_info.atlas_3_10_threads_in fo'>
NOT AVAILABLE

atlas_3_10_info:
customize UnixCCompiler
libraries satlas,satlas not found in /usr/local/lib
customize UnixCCompiler
libraries lapack_atlas not found in /usr/local/lib
customize UnixCCompiler
libraries satlas,satlas not found in /usr/lib/atlas-base
customize UnixCCompiler
customize UnixCCompiler
libraries satlas,satlas not found in /usr/lib
customize UnixCCompiler
customize UnixCCompiler
libraries satlas,satlas not found in /usr/lib/arm-linux-gnueabihf
customize UnixCCompiler
libraries lapack_atlas not found in /usr/lib/arm-linux-gnueabihf
<class 'numpy.distutils.system_info.atlas_3_10_info'>
NOT AVAILABLE

atlas_threads_info:
Setting PTATLAS=ATLAS
customize UnixCCompiler
libraries ptf77blas,ptcblas,atlas not found in /usr/local/lib
customize UnixCCompiler
libraries lapack_atlas not found in /usr/local/lib
customize UnixCCompiler
libraries ptf77blas,ptcblas,atlas not found in /usr/lib/atlas-base
customize UnixCCompiler
customize UnixCCompiler
libraries ptf77blas,ptcblas,atlas not found in /usr/lib
customize UnixCCompiler
customize UnixCCompiler
libraries ptf77blas,ptcblas,atlas not found in /usr/lib/arm-linux-gnueabihf
customize UnixCCompiler
libraries lapack_atlas not found in /usr/lib/arm-linux-gnueabihf
<class 'numpy.distutils.system_info.atlas_threads_info'>
NOT AVAILABLE

atlas_info:
customize UnixCCompiler
libraries f77blas,cblas,atlas not found in /usr/local/lib
customize UnixCCompiler
libraries lapack_atlas not found in /usr/local/lib
customize UnixCCompiler
customize UnixCCompiler
customize UnixCCompiler
<class 'numpy.distutils.system_info.atlas_info'>
customize UnixCCompiler
customize UnixCCompiler
customize UnixCCompiler
FOUND:
library_dirs = ['/usr/lib/atlas-base/atlas', '/usr/lib/atlas-base']
language = f77
include_dirs = ['/usr/include/atlas']
define_macros = [('ATLAS_INFO', '""3.10.3""')]
libraries = ['lapack', 'f77blas', 'cblas', 'atlas', 'f77blas', 'cblas']

FOUND:
library_dirs = ['/usr/lib/atlas-base/atlas', '/usr/lib/atlas-base']
language = f77
include_dirs = ['/usr/include/atlas']
define_macros = [('ATLAS_INFO', '""3.10.3""')]
libraries = ['lapack', 'f77blas', 'cblas', 'atlas', 'f77blas', 'cblas']

/usr/lib/python3.5/distutils/dist.py:261: UserWarning: Unknown distribution option: 'define_macros'
warnings.warn(msg)
running install
running build
running config_cc
unifing config_cc, config, build_clib, build_ext, build commands --compiler options
running config_fc
unifing config_fc, config, build_clib, build_ext, build commands --fcompiler options
running build_src
build_src
building py_modules sources
building library "npymath" sources
get_default_fcompiler: matching types: '['gnu95', 'intel', 'lahey', 'pg', 'absoft', 'nag', 'vast', 'compaq', 'intele', 'intelem', 'gnu', 'g95', 'pathf95', 'nagfor']'
customize Gnu95FCompiler
customize Gnu95FCompiler
customize Gnu95FCompiler using config
C compiler: arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.5-6waWnr/python3.5-3.5.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC

compile options: '-Inumpy/core/src/private -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/usr/include/python3.5m -c'
arm-linux-gnueabihf-gcc: _configtest.c
arm-linux-gnueabihf-gcc -pthread _configtest.o -o _configtest
success!
removing: _configtest.c _configtest.o _configtest.o.d _configtest
C compiler: arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.5-6waWnr/python3.5-3.5.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC

compile options: '-Inumpy/core/src/private -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/usr/include/python3.5m -c'
arm-linux-gnueabihf-gcc: _configtest.c
_configtest.c:1:5: warning: conflicting types for built-in function ‘exp’
int exp (void);
^~~
arm-linux-gnueabihf-gcc -pthread _configtest.o -o _configtest
_configtest.o: In function `main':
/tmp/pip-install-pvclqp_z/numpy/_configtest.c:6: undefined reference to `exp'
collect2: error: ld returned 1 exit status
_configtest.o: In function `main':
/tmp/pip-install-pvclqp_z/numpy/_configtest.c:6: undefined reference to `exp'
collect2: error: ld returned 1 exit status
failure.
removing: _configtest.c _configtest.o _configtest.o.d
C compiler: arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.5-6waWnr/python3.5-3.5.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC

compile options: '-Inumpy/core/src/private -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/usr/include/python3.5m -c'
arm-linux-gnueabihf-gcc: _configtest.c
_configtest.c:1:5: warning: conflicting types for built-in function ‘exp’
int exp (void);
^~~
arm-linux-gnueabihf-gcc -pthread _configtest.o -lm -o _configtest
success!
removing: _configtest.c _configtest.o _configtest.o.d _configtest
adding 'build/src.linux-armv7l-3.5/numpy/core/src/npymath' to include_dirs.
None - nothing done with h_files = ['build/src.linux-armv7l-3.5/numpy/core/src/npymath/npy_math_internal.h']
building library "npysort" sources
adding 'build/src.linux-armv7l-3.5/numpy/core/src/private' to include_dirs.
None - nothing done with h_files = ['build/src.linux-armv7l-3.5/numpy/core/src/private/npy_partition.h', 'build/src.linux-armv7l-3.5/numpy/core/src/private/npy_binsearch.h']
building extension "numpy.core._dummy" sources
Generating build/src.linux-armv7l-3.5/numpy/core/include/numpy/config.h
C compiler: arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.5-6waWnr/python3.5-3.5.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC

compile options: '-Inumpy/core/src/private -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/usr/include/python3.5m -c'
arm-linux-gnueabihf-gcc: _configtest.c
_configtest.c:1:20: fatal error: Python.h: No such file or directory
#include <Python.h>
^
compilation terminated.
_configtest.c:1:20: fatal error: Python.h: No such file or directory
#include <Python.h>
^
compilation terminated.
failure.
removing: _configtest.c _configtest.o
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-install-pvclqp_z/numpy/setup.py", line 403, in <module>
setup_package()
File "/tmp/pip-install-pvclqp_z/numpy/setup.py", line 395, in setup_package
setup(**metadata)
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/core.py", line 169, in setup
return old_setup(**new_attr)
File "/usr/local/lib/python3.5/dist-packages/setuptools/__init__.py", line 131, in setup
return distutils.core.setup(**attrs)
File "/usr/lib/python3.5/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.5/distutils/dist.py", line 955, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/command/install.py", line 62, in run
r = self.setuptools_run()
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/command/install.py", line 36, in setuptools_run
return distutils_install.run(self)
File "/usr/lib/python3.5/distutils/command/install.py", line 583, in run
self.run_command('build')
File "/usr/lib/python3.5/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/command/build.py", line 47, in run
old_build.run(self)
File "/usr/lib/python3.5/distutils/command/build.py", line 135, in run
self.run_command(cmd_name)
File "/usr/lib/python3.5/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/command/build_src.py", line 148, in run
self.build_sources()
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/command/build_src.py", line 165, in build_sources
self.build_extension_sources(ext)
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/command/build_src.py", line 324, in build_extension_sources
sources = self.generate_sources(sources, ext)
File "/tmp/pip-install-pvclqp_z/numpy/numpy/distutils/command/build_src.py", line 377, in generate_sources
source = func(extension, build_dir)
File "numpy/core/setup.py", line 422, in generate_config_h
moredefs, ignored = cocache.check_types(config_cmd, ext, build_dir)
File "numpy/core/setup.py", line 48, in check_types
out = check_types(*a, **kw)
File "numpy/core/setup.py", line 281, in check_types
"install {0}-dev|{0}-devel.".format(python))
SystemError: Cannot compile 'Python.h'. Perhaps you need to install python-dev|python-devel.

----------------------------------------
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-pvclqp_z/numpy/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-record-nos7wynx/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-install-pvclqp_z/numpy/
You are using pip version 18.0, however version 18.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
[smarthome@SmartHomeNG ~]$

[schuma]

Ich weiß nicht ob es damit zusammenhängt aber das hast Du in der ReadMe gelesen?

On Raspberry debian stretch you also have to run: apt-get install libatlas-base-dev

[schloessl]

Narürlich!

[root@SmartHomeNG ~]# apt-get install libatlas-base-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
libatlas-base-dev is already the newest version (3.10.3-1+rpi1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.


Liegt hier das Priblem?
python 2.7 hat pip3 18.1
python 3 mault die 18.0 an

 sudo pip3 install --upgrade pip3
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already up-to-date: pip3 in /usr/local/lib/python3.5/dist-packages (0.2)
You are using pip version 18.0, however version 18.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.

[schuma]

Ich habe PIP 9.0.1 installiert.

Mach doch mal das Upgrade auf 18.1

[schloessl]

N-mal probiert mit pip3 instal --Upgrade oder apt-get

letztlich war immer nur Python 2.7 pip3 auf 18.1
pip3 -V zeigte 18.0
Es gibt einen Chat zu pip3
Hier gibt es wohl Probleme!
DieFehlermeldungen deuten doch auf fehlende (??) Compilermodule hin?

[bmx]

Ich würde einfach mal probieren ob

sudo apt-get -y install dialog python3 python3-dev python3-setuptools unzip build-essential

zum Ergebnis führen kann.

Und entweder

sudo python3 -m pip install --upgrade pip

oder

sudo pip3 install pip --upgrade

sollten PIP aktualisieren

[Onkelandy]

Könntest es über apt-get install python3-scipy versuchen. Numpy wohl auch.

Dass das plugin ohne scipy nicht startet ist blöd, war anders geplant

[schloessl]

Danke an meine Helfer. Es geht jetzt!

Von bmx

 sudo apt-get -y install dialog python3 python3-dev python3-setuptools unzip build-essential

Test:
pip3 -V
pip 18.0 from /usr/local/lib/python3.5/dist-packages/pip (python 3.5)

[smarthome@SmartHomeNG ~]$ sudo python3 -m pip install --upgrade pip

Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Collecting pip   Using cached https://files.pythonhosted.org/packages/c2/d7/90f34cb0d83a6c5631cf71dfe64cc1054598c843a92b400e55675cc2ac37/pip-18.1-py2.py3-none-any.whl Installing collected packages: pip  
Found existing installation: pip 18.0     Uninstalling pip-18.0:      
Successfully uninstalled pip-18.0
Successfully installed pip-18.1

Danach laut Onkelandy:
Jetzt wird scipy und numpy installiert!

[smarthome@SmartHomeNG ~]$ sudo apt-get install python3-scipy
Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed:   python3-decorator python3-numpy Suggested packages:   python-numpy-doc python3-nose python3-numpy-dbg python-scipy-doc The following NEW packages will be installed:   python3-decorator python3-numpy python3-scipy 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 9,404 kB of archives. After this operation, 40.2 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf python3-decorator all 4.0.11-1 [13.3 kB] Get:2 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf python3-numpy armhf 1:1.12.1-3 [1,693 kB] Get:3 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf python3-scipy armhf 0.18.1-2 [7,698 kB] Fetched 9,404 kB in 11s (815 kB/s) Selecting previously unselected package python3-decorator. (Reading database ... 74364 files and directories currently installed.) Preparing to unpack .../python3-decorator_4.0.11-1_all.deb ... Unpacking python3-decorator (4.0.11-1) ... Selecting previously unselected package python3-numpy. Preparing to unpack .../python3-numpy_1%3a1.12.1-3_armhf.deb ... Unpacking python3-numpy (1:1.12.1-3) ... Selecting previously unselected package python3-scipy. Preparing to unpack .../python3-scipy_0.18.1-2_armhf.deb ... Unpacking python3-scipy (0.18.1-2) ... Setting up python3-numpy (1:1.12.1-3) ... Processing triggers for man-db (2.7.6.1-2) ... Setting up python3-decorator (4.0.11-1) ... Setting up python3-scipy (0.18.1-2) ...  [smarthome@SmartHomeNG ~]$

UZSU erscheint schon einmal im Backend-NG!!

Danke für die Hilfe!
Wolfgang

[schuma]

smai Das Verhalten bezüglich dem Umbruch in dem Widget hat sich mit dem neuen Firefox etwas verändert.
Das Umbrechen erfolgt nun nicht mehr beim Öffnen der Expertenleiste sondern IMMER, wenn eine Bildlaufleiste rechts im Spiel ist.
Sobald eine Bildlaufleiste eingeblendet wird, wird der "entf" Button umgebrochen.
Beim Klick auf "exp." ändert sich nun nichts mehr.

Onkelandy irgendwie hab ich noch manchmal eine UZSU die keinen Schedulereintrag setzt. Ich bin da noch dabei das nachvollziehbar zu machen.
Im Gefühl habe ich, dass das nach einem Neustart auftritt. Aber ich suche noch..... Das Ganze ist auch wieder recht willkürlich. Könnte auch mit vielen events zu einer Minute zusammenhängen. Ich habe um 23:55 dieverse uzsus die da gleichzeitig in den Räumen die Heizung auf Nacht stellen und die PM auf Nacht stellen.