Timer issue in HS3

[747driver]

Good day all,
The HS3 is switching the outside lights OFF at 23:00
I used to do this in the Graphic Logic Editor, Hour=23 --> Switch Object outside lights set to 0.
Much later I discovered the possibility to create a time clock event in the Gira iPad app, used that one to switch the lights OFF at 23:00 and removed the function from the Graphic Logic Editor.

Recently I changed the switch OFF time into Sunrise-0:20 minutes.
The issue I now have is that the lights are still being switched OFF by the HS3 at 23:00
Workaround I use is switching the lights ON again using a time clock event in the Gira iPad app at 23:02
I cannot find the reason why this switching time is still in the HS3.
When I look at the communication objects, select the outside lights and look at the References I can see it's only used in the GLE to record the last switch ON/OFF date/time (as input) and in QC Config.
Even with all switching events removed in the iPad app the switching still occurs at 23:00
Could the info in hslist tell me where the switching event comes from??
I uploaded a different project and after some time uploaded the previous project again without changing the issue.

Attached a screenshot from the hslist and from the eib monitor.

HSLIST Uhren-Prot.jpg

Screen Shot 2020-01-06 at 15.07.51.jpg

[NilsS]

you can try HS-Insight and use the command listuhrproto to view this list translated to humans

[747driver]

Thanks Nils but:
"NameError: name 'listuhrproto' is not defined"
I'm using HS Expert 4.5.0 for my HS3 and downloaded 12243_HS-Insight_2.6.hsl
Connected a dummy bit object with value 1 to the aktiv input and dummy bit object to the aktiv output.
Would that be correct?

[NilsS]

Yep that is correct. Did you downloaded the 26 Version from the last post of the insight thread ?

[747driver]

I don't think so.
Believe I took the first I saw (Version 0.25).
Will try the last one.

[NilsS]

Die aktuelle Version ist 0.44 https://knx-user-forum.de/forum/%C3%...58#post1449858

[747driver]

Got it running.
Had trouble to get the Putty colours correct so I'm using netcat on my mac (nc hs-ip-address 23).
As listuhrproto only seems to show clock events which happened after a HS restart I will have to wait another day to see the 23:00 switch event.

Had a look at listuhr.
To see how it works I entered a new clock event in the Gira iPad app and I could see by the colour of the "* Zeitschaltuhr 'k.A.' (UZSU1000000659)" line whether the time clock was active or not.
Cool, donation on its way

I also saw a couple active Zeitschaltuhr which I cannot see in the Gira app and which should not be there!
One of them was indeed the switching OFF of the outside lights at 23:00...
The other one is the switching OFF of the central heating at 22:00
It is as if I used a function in QuadConfig in which I used the Time clock, activated a Time clock switch event and then removed the function but the Time clock switch event is still there.
Is that possible?

How do I remove ALL Time clock events from the HS3?

[747driver]

I think the issue has been solved.
In QuadConfig I checked Project/QuadClient/Functions
Went through the whole list and discovered functions which are not in use anymore but which did have "Use time clock" active.
I've put these functions in Building structure/Room and indeed, one of them had the "Switch the outside lights OFF at 23:00" event....
Removed the faulty time clock events and removed the functions and all seems to be well now.
Your 12243_HS-Insight_2.6.hsl helped by making the list of time clock events easily readable.
Thanks Nils!