Apple - HomeKit - Schnittstelle zur Heimautomation

snowdd antwortet

06.10.2015, 12:44
@brick
habe gesehen, dass Du PositionState mit einer Adresse verknüpft hast. Welche Werte kommenden auf dieser Adresse an? Da sind nur bestimmte erlaubt, siehe /platforms/KNX.md

Ansonsten wird die homebridge "incompliant" und HomeKit sperrt sie - allerdings sollte der Server die KNx Aktivitäten auf dem Bus weiter anzeigen.
Einen Kommentar schreiben:
rehell antwortet

06.10.2015, 12:06
Hatte das selbe Problem. Bei mir hat auf dem Iphone unter Einstellungen->Datenschutz->HomeKit->HomeKit-Konfiguration zrücksetzen und danach ein Neuanlegen in der App geholfen..
Einen Kommentar schreiben:
snowdd antwortet

06.10.2015, 11:52
Hast Du ihn nochmal ohne `nohup` gestartet? Bleibt er dann auch bei der gleichen Zeile stehen?
Einen Kommentar schreiben:

Brick antwortet

06.10.2015, 11:42

Hi,

danke erst mal für die Hilfe !!

nein.. er tut auch nix mehr, wenn ich im Haus was schalte... das hat er als es funktioniert hat schon getan..
Ich hab nur mein Config File angepasst.. hab das File zwar validieren lassen.. aber scheinbar hatte er doch
noch was zum aussetzen..
hab dann das Orginalfile aus dem Image verwendet.. nur die IP auf den EIBD geändert.. leider ohne Erfolg.

Hier das Config File:

Code:

{
    "bridge": {
        "name": "Homebridge",
        "username": "CC:22:3D:E3:CE:30",
        "port": 51826,
        "pin": "123-34-567"
    },
    "description": "This is an example configuration file for KNX platform shim",
    "hint": "Always paste into jsonlint.com validation page before starting your homebridge, saves a lot of frustration",
    "hint2": "Replace all group addresses by current addresses of your installation, these are arbitrary examples!",
    "hint3": "For valid services and their characteristics have a look at the knxdevice.md file in folder accessories!",
    "platforms": [
        {
            "platform": "KNX",
            "name": "KNX",
            "knxd_ip": "192.168.172.138",
            "knxd_port": 6720,
            "accessories": [
                {
                    "accessory_type": "knxdevice",
                    "description": "Only generic type knxdevice is supported, all previous knx types have been merged into that.",
                    "name": "Keller",
                    "services": [
                        {
                            "type": "Lightbulb",
                            "name": "Licht Bar",
                            "On": {
                                "Set": "0/0/8"
                            }
                        },
                        {
                            "type": "Lightbulb",
                            "description": "iOS8 Lightbulb type, supports On (Switch) and Brightness",
                            "name": "Licht Tresen",
                            "On": {
                                "Set": "0/0/9",
                                "Listen": [
                                    "0/0/8"
                                ]
                            },
                            "Brightness": {
                                "Set": "0/0/4",
                                "Listen": [
                                    "0/0/4"
                                ]
                            }
                        }
                    ],
                    "services-description": "Services is an array, you CAN have multiple service types in one accessory, though it is not fully supported in many iOS HK apps, such as EVE and myTouchHome"
                },
                {
                    "accessory_type": "knxdevice",
                    "description": "Only generic type knxdevice is supported, all previous knx types have been merged into that.",
                    "name": "Esszimmer",
                    "services": [
                        {
                            "type": "Lightbulb",
                            "description": "iOS8 Lightbulb type, supports On (Switch) and Brightness",
                            "name": "Licht Esszimmer",
                            "On": {
                                "Set": "0/1/11",
                                "Listen": [
                                    "0/1/11"
                                ]
                            },
                            "Brightness": {
                                "Set": "0/1/34",
                                "Listen": [
                                    "0/1/34"
                                ]
                            }
                        }
                    ],
                    "services-description": "Services is an array, you CAN have multiple service types in one accessory, though it is not fully supported in many iOS HK apps, such as EVE and myTouchHome"
                },
                {
                    "accessory_type": "knxdevice",
                    "description": "Only generic type knxdevice is supported, all previous knx types have been merged into that.",
                    "name": "Wohnzimmer",
                    "services": [
                        {
                            "type": "Lightbulb",
                            "description": "iOS8 Lightbulb type, supports On (Switch) and Brightness",
                            "name": "Licht Couch",
                            "On": {
                                "Set": "0/1/3",
                                "Listen": [
                                    "0/1/3"
                                ]
                            },
                            "Brightness": {
                                "Set": "0/1/33",
                                "Listen": [
                                    "0/1/33"
                                ]
                            }
                        }
                    ],
                    "services-description": "Services is an array, you CAN have multiple service types in one accessory, though it is not fully supported in many iOS HK apps, such as EVE and myTouchHome"
                },
                {
                    "accessory_type": "knxdevice",
                    "description": "Only generic type knxdevice is supported, all previous knx types have been merged into that.",
                    "name": "Küche",
                    "services": [
                        {
                            "type": "Lightbulb",
                            "description": "iOS8 Lightbulb type, supports On (Switch) and Brightness",
                            "name": "Licht Küchenzeile",
                            "On": {
                                "Set": "0/1/4",
                                "Listen": [
                                    "0/1/4"
                                ]
                            }
                        },
                        {
                            "type": "Lightbulb",
                            "description": "iOS8 Lightbulb type, supports On (Switch) and Brightness",
                            "name": "Licht Küche",
                            "On": {
                                "Set": "0/1/7",
                                "Listen": [
                                    "0/1/7"
                                ]
                            }
                        }
                    ],
                    "services-description": "Services is an array, you CAN have multiple service types in one accessory, though it is not fully supported in many iOS HK apps, such as EVE and myTouchHome"
                },
                {
                    "accessory_type": "knxdevice",
                    "name": "Raumtemperatur Wohnzimmer",
                    "description": "iOS8.4.1 TemperatureSensor type, supports CurrentTemperature",
                    "services": [
                        {
                            "type": "TemperatureSensor",
                            "name": "Raumtemperatur",
                            "CurrentTemperature": {
                                "Listen": "3/2/47"
                            }
                        }
                    ]
                },
                {
                    "accessory_type": "knxdevice",
                    "description": "sample device with multiple services. Multiple services of different types are widely supported",
                    "name": "Rollladen",
                    "services": [
                        {
                            "type": "WindowCovering",
                            "description": "iOS9 Window covering (blinds etc) type, still WIP",
                            "name": "Rollladen Wohnzimmer",
                            "Target": {
                                "Set": "1/1/54",
                                "Listen": "1/1/215"
                            },
                            "Current": {
                                "Set": "3/1/54",
                                "Listen": "1/1/215"
                            },
                            "PositionState": {
                                "Listen": "1/7/1"
                            }
                        }
                    ]
                }
            ]
        }
    ]
}

Einen Kommentar schreiben:

snowdd antwortet

06.10.2015, 09:01
da hängt er jetzt.. und tut nix mehr..

Passiert auch nichts, wenn Du einen Lichtschalter betätigst? Dann sollte zumindest eine neue Zeile wie

[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/7 from 1.1.16 of type DPT1 for On

angezeigt werden.
Das sich deine Homekit App nicht mehr meldet, bedeutet wahrscheinlich dass Deine Bridge irgendwie "gegen die Regeln verstoßen" hat.
Was für Geräte hast Du konfiguriert? Und wie viele?
Gruß
Raoul
Einen Kommentar schreiben:
snowdd antwortet

06.10.2015, 08:57
events.js:85
throw er; // Unhandled 'error' event
^
Error: listen EADDRINUSE
at exports._errnoException (util.js:746:11)
at Server._listen2 (net.js:1156:14)
at listen (net.js:1182:10)

Das passiert immer, wenn der Server im Hintergrund noch läuft...

sudo ps -fu pi

zeigt bei mir die Prozesse aus einer anderen Session. "node app.js" ist bei mir der Prozess den ich killen muss.
Einen Kommentar schreiben:

Brick antwortet

06.10.2015, 07:11

hmm.. hab jetzt mit ps -ax geschaut.. und alle Prozesse gekillt, die irgendwie dazu gehört haben.. dann
nochmal neu gestartet..
jetzt bricht er zwar nicht mehr ab.. aber hängt irgendwie:

Code:

root@raspberrypi:/usr/src/homebridge# npm start

> homebridge@0.1.1 start /usr/src/homebridge
> DEBUG=* node app.js || true

*** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi.
*** WARNING *** Please fix your application to use the native API of Avahi!
*** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node>
*** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi.
*** WARNING *** Please fix your application to use the native API of Avahi!
*** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node&f=DNSServiceRegister>
Starting HomeBridge server...
_____________________________________________________________________
IMPORTANT: Homebridge is in the middle of some big changes.
           Read more about it here:
           https://github.com/nfarina/homebridge/wiki/Migration-Guide
_____________________________________________________________________

Loading 1 platforms...
[KNX] Initializing KNX platform...
[KNX] Fetching KNX devices.
[KNX] parsing acc 0 of 6
[KNX] push new universal device Keller
[KNX] Accessory constructor called
[KNX] created Keller universal accessory
[KNX] parsing acc 1 of 6
[KNX] push new universal device Esszimmer
[KNX] Accessory constructor called
[KNX] created Esszimmer universal accessory
[KNX] parsing acc 2 of 6
[KNX] push new universal device Wohnzimmer
[KNX] Accessory constructor called
[KNX] created Wohnzimmer universal accessory
[KNX] parsing acc 3 of 6
[KNX] push new universal device KÃ¼che
[KNX] Accessory constructor called
[KNX] created KÃ¼che universal accessory
[KNX] parsing acc 4 of 6
[KNX] push new universal device Raumtemperatur Wohnzimmer
[KNX] Accessory constructor called
[KNX] created Raumtemperatur Wohnzimmer universal accessory
[KNX] parsing acc 5 of 6
[KNX] push new universal device Rollladen
[KNX] Accessory constructor called
[KNX] created Rollladen universal accessory
[KNX] returning 6 accessories
[KNX] Initializing platform accessory 'Keller'...
[KNX] Preparing Services: 2
[KNX] Preparing Service: 0 of type Lightbulb
[KNX] [Keller]:Lightbulb on/off characteristic enabled
[KNX] knx registering BOOLEAN 0/0/8
[KNX] [Keller]:[On]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 0/0/8
[KNX] Preparing Service: 1 of type Lightbulb
[KNX] [Keller]:Lightbulb on/off characteristic enabled
[KNX] knx registering BOOLEAN 0/0/9,0/0/8
[KNX] [Keller]:[On]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 0/0/9
[KNX] [knxdevice:knxread] preparing knx request for 0/0/8
[KNX] [Keller]:Lightbulb Brightness characteristic enabled
[KNX] knx registering PERCENT 0/0/4,0/0/4
[KNX] [Keller]:[Brightness]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 0/0/4
[KNX] [knxdevice:knxread] preparing knx request for 0/0/4
>>> knxd groupsocketlisten starting <<<
[KNX] Initializing platform accessory 'Esszimmer'...
[KNX] Preparing Services: 1
[KNX] Preparing Service: 0 of type Lightbulb
[KNX] [Esszimmer]:Lightbulb on/off characteristic enabled
[KNX] knx registering BOOLEAN 0/1/11,0/1/11
[KNX] [Esszimmer]:[On]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 0/1/11
[KNX] [knxdevice:knxread] preparing knx request for 0/1/11
[KNX] [Esszimmer]:Lightbulb Brightness characteristic enabled
[KNX] knx registering PERCENT 0/1/34,0/1/34
[KNX] [Esszimmer]:[Brightness]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 0/1/34
[KNX] [knxdevice:knxread] preparing knx request for 0/1/34
<< knxd socket listener already running >>
[KNX] Initializing platform accessory 'Wohnzimmer'...
[KNX] Preparing Services: 1
[KNX] Preparing Service: 0 of type Lightbulb
[KNX] [Wohnzimmer]:Lightbulb on/off characteristic enabled
[KNX] knx registering BOOLEAN 0/1/3,0/1/3
[KNX] [Wohnzimmer]:[On]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 0/1/3
[KNX] [knxdevice:knxread] preparing knx request for 0/1/3
[KNX] [Wohnzimmer]:Lightbulb Brightness characteristic enabled
[KNX] knx registering PERCENT 0/1/33,0/1/33
[KNX] [Wohnzimmer]:[Brightness]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 0/1/33
[KNX] [knxdevice:knxread] preparing knx request for 0/1/33
<< knxd socket listener already running >>
[KNX] Initializing platform accessory 'KÃ¼che'...
[KNX] Preparing Services: 2
[KNX] Preparing Service: 0 of type Lightbulb
[KNX] [KÃ¼che]:Lightbulb on/off characteristic enabled
[KNX] knx registering BOOLEAN 0/1/4,0/1/4
[KNX] [KÃ¼che]:[On]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 0/1/4
[KNX] [knxdevice:knxread] preparing knx request for 0/1/4
[KNX] Preparing Service: 1 of type Lightbulb
[KNX] [KÃ¼che]:Lightbulb on/off characteristic enabled
[KNX] knx registering BOOLEAN 0/1/7,0/1/7
[KNX] [KÃ¼che]:[On]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 0/1/7
[KNX] [knxdevice:knxread] preparing knx request for 0/1/7
<< knxd socket listener already running >>
[KNX] Initializing platform accessory 'Raumtemperatur Wohnzimmer'...
[KNX] Preparing Services: 1
[KNX] Preparing Service: 0 of type TemperatureSensor
[KNX] [Raumtemperatur Wohnzimmer]:TemperatureSensor CurrentTemperature characteristic enabled
[KNX] [Raumtemperatur Wohnzimmer]:[Current Temperature]:knx registering FLOAT ,3/2/47
[KNX] [Raumtemperatur Wohnzimmer]:[Current Temperature]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 3/2/47
<< knxd socket listener already running >>
[KNX] Initializing platform accessory 'Rollladen'...
[KNX] Preparing Services: 1
[KNX] Preparing Service: 0 of type WindowCovering
[KNX] [Rollladen]:WindowCovering PositionState characteristic enabled
[KNX] [Rollladen]:[Position State]:knx registering FLOAT ,1/7/1
[KNX] [Rollladen]:[Position State]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 1/7/1
<< knxd socket listener already running >>
Scan this code with your HomeKit App on your iOS device:

    ââââââââââââââ
    â 123-34-567 â
    ââââââââââââââ

  EventedHTTPServer Server listening on port 51826 +0ms
[KNX] [knxdevice:knxread] knx request sent for 0/0/8
[KNX] [knxdevice:knxread] knx request sent for 0/0/9
[KNX] [knxdevice:knxread] knx request sent for 0/0/8
[KNX] [knxdevice:knxread] knx request sent for 0/0/4
[KNX] [knxdevice:knxread] knx request sent for 0/0/4
[KNX] [knxdevice:knxread] knx request sent for 0/1/11
[KNX] [knxdevice:knxread] knx request sent for 0/1/11
[KNX] [knxdevice:knxread] knx request sent for 0/1/34
[KNX] [knxdevice:knxread] knx request sent for 0/1/34
[KNX] [knxdevice:knxread] knx request sent for 0/1/3
[KNX] [knxdevice:knxread] knx request sent for 0/1/3
[KNX] [knxdevice:knxread] knx request sent for 0/1/33
[KNX] [knxdevice:knxread] knx request sent for 0/1/33
[KNX] [knxdevice:knxread] knx request sent for 0/1/4
[KNX] [knxdevice:knxread] knx request sent for 0/1/4
[KNX] [knxdevice:knxread] knx request sent for 0/1/7
[KNX] [knxdevice:knxread] knx request sent for 0/1/7
[KNX] [knxdevice:knxread] knx request sent for 3/2/47
[KNX] [knxdevice:knxread] knx request sent for 1/7/1
[KNX] [Keller]: Received value from bus:0 for 0/0/8 from 1.1.15 of type DPT1 for On
[KNX] [Keller]: Received value from bus:0 for 0/0/8 from 1.1.15 of type DPT1 for On
[KNX] [Keller]: Received value from bus:0 for 0/0/9 from 1.1.15 of type DPT1 for On
[KNX] [Keller]: Received value from bus:0 for 0/0/8 from 1.1.15 of type DPT1 for On
[KNX] [Keller]: Received value from bus:0 for 0/0/8 from 1.1.15 of type DPT1 for On
[KNX] [Keller]: Received value from bus:0 for 0/0/4 from 1.1.1 of type DPT5 for Brightness
[KNX] [Keller]: Received value from bus:0 for 0/0/4 from 1.1.1 of type DPT5 for Brightness
[KNX] [Keller]: Received value from bus:0 for 0/0/4 from 1.1.1 of type DPT5 for Brightness
[KNX] [Keller]: Received value from bus:0 for 0/0/4 from 1.1.1 of type DPT5 for Brightness
[KNX] [Keller]: Received value from bus:0 for 0/0/4 from 1.1.1 of type DPT5 for Brightness
[KNX] [Keller]: Received value from bus:0 for 0/0/4 from 1.1.1 of type DPT5 for Brightness
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.2.4 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.2.4 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.2.3 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.2.3 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.2.7 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.2.7 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.1.16 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.1.16 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.2.4 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.2.4 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.2.3 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.2.3 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.2.7 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.2.7 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.1.16 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/11 from 1.1.16 of type DPT1 for On
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/34 from 1.2.4 of type DPT5 for Brightness
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/34 from 1.2.4 of type DPT5 for Brightness
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/34 from 1.2.4 of type DPT5 for Brightness
[KNX] [Esszimmer]: Received value from bus:0 for 0/1/34 from 1.2.4 of type DPT5 for Brightness
[KNX] [Wohnzimmer]: Received value from bus:0 for 0/1/3 from 1.2.6 of type DPT1 for On
[KNX] [Wohnzimmer]: Received value from bus:0 for 0/1/3 from 1.2.6 of type DPT1 for On
[KNX] [Wohnzimmer]: Received value from bus:0 for 0/1/3 from 1.2.7 of type DPT1 for On
[KNX] [Wohnzimmer]: Received value from bus:0 for 0/1/3 from 1.2.7 of type DPT1 for On
[KNX] [Wohnzimmer]: Received value from bus:0 for 0/1/3 from 1.2.6 of type DPT1 for On
[KNX] [Wohnzimmer]: Received value from bus:0 for 0/1/3 from 1.2.6 of type DPT1 for On
[KNX] [Wohnzimmer]: Received value from bus:0 for 0/1/3 from 1.2.7 of type DPT1 for On
[KNX] [Wohnzimmer]: Received value from bus:0 for 0/1/3 from 1.2.7 of type DPT1 for On
[KNX] [Wohnzimmer]: Received value from bus:0 for 0/1/33 from 1.2.6 of type DPT5 for Brightness
[KNX] [Wohnzimmer]: Received value from bus:0 for 0/1/33 from 1.2.6 of type DPT5 for Brightness
[KNX] [Wohnzimmer]: Received value from bus:0 for 0/1/33 from 1.2.6 of type DPT5 for Brightness
[KNX] [Wohnzimmer]: Received value from bus:0 for 0/1/33 from 1.2.6 of type DPT5 for Brightness
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/4 from 1.2.7 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/4 from 1.2.7 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/4 from 1.1.16 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/4 from 1.1.16 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/4 from 1.2.7 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/4 from 1.2.7 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/4 from 1.1.16 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/4 from 1.1.16 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/7 from 1.2.7 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/7 from 1.2.7 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/7 from 1.2.3 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/7 from 1.2.3 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/7 from 1.1.16 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/7 from 1.1.16 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/7 from 1.2.7 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/7 from 1.2.7 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/7 from 1.2.3 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/7 from 1.2.3 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/7 from 1.1.16 of type DPT1 for On
[KNX] [KÃ¼che]: Received value from bus:0 for 0/1/7 from 1.1.16 of type DPT1 for On
[KNX] [Keller]: Received value from bus:0 for 0/0/4 from 1.1.1 of type DPT5 for Brightness
[KNX] [Keller]: Received value from bus:0 for 0/0/4 from 1.1.1 of type DPT5 for Brightness
[KNX] [Keller]: Received value from bus:0 for 0/0/8 from 1.1.15 of type DPT1 for On
[KNX] [Keller]: Received value from bus:0 for 0/0/8 from 1.1.15 of type DPT1 for On

da hängt er jetzt.. und tut nix mehr..

Einen Kommentar schreiben:

Brick antwortet

06.10.2015, 06:53

Uhmm .man.. jetzt hatte ichs am laufen.. hab dann nochmal was an der Config geändert und
ab dann ging es nicht mehr.. hab dann wieder ein älteres Config File eingespielt, leider startet
der Server trotzdem nicht..

Folgender Fehler Code:

Code:

root@raspberrypi:/usr/src/homebridge# npm start

> homebridge@0.1.1 start /usr/src/homebridge
> DEBUG=* node app.js || true

*** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi.
*** WARNING *** Please fix your application to use the native API of Avahi!
*** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node>
*** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi.
*** WARNING *** Please fix your application to use the native API of Avahi!
*** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node&f=DNSServiceRegister>
Starting HomeBridge server...
_____________________________________________________________________
IMPORTANT: Homebridge is in the middle of some big changes.
           Read more about it here:
           https://github.com/nfarina/homebridge/wiki/Migration-Guide
_____________________________________________________________________

Loading 1 platforms...
[KNX] Initializing KNX platform...
[KNX] Fetching KNX devices.
[KNX] parsing acc 0 of 7
[KNX] push new universal device Wohnzimmer
[KNX] Accessory constructor called
[KNX] created Wohnzimmer universal accessory
[KNX] parsing acc 1 of 7
[KNX] push new universal device Esszimmer
[KNX] Accessory constructor called
[KNX] created Esszimmer universal accessory
[KNX] parsing acc 2 of 7
[KNX] push new universal device KÃ¼che
[KNX] Accessory constructor called
[KNX] created KÃ¼che universal accessory
[KNX] parsing acc 3 of 7
[KNX] push new universal device Raumtemperatur Wohnzimmer
[KNX] Accessory constructor called
[KNX] created Raumtemperatur Wohnzimmer universal accessory
[KNX] parsing acc 4 of 7
[KNX] push new universal device Rollladen
[KNX] Accessory constructor called
[KNX] created Rollladen universal accessory
[KNX] parsing acc 5 of 7
[KNX] push new universal device Schloss
[KNX] Accessory constructor called
[KNX] created Schloss universal accessory
[KNX] parsing acc 6 of 7
[KNX] push new universal device Garage
[KNX] Accessory constructor called
[KNX] created Garage universal accessory
[KNX] returning 7 accessories
[KNX] Initializing platform accessory 'Wohnzimmer'...
[KNX] Preparing Services: 1
[KNX] Preparing Service: 0 of type Lightbulb
[KNX] [Wohnzimmer]:Lightbulb on/off characteristic enabled
[KNX] knx registering BOOLEAN 1/2/44,1/2/82
[KNX] [Wohnzimmer]:[On]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 1/2/44
[KNX] [knxdevice:knxread] preparing knx request for 1/2/82
[KNX] [Wohnzimmer]:Lightbulb Brightness characteristic enabled
[KNX] knx registering PERCENT 1/2/43,1/2/23
[KNX] [Wohnzimmer]:[Brightness]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 1/2/43
[KNX] [knxdevice:knxread] preparing knx request for 1/2/23
>>> knxd groupsocketlisten starting <<<
[KNX] Initializing platform accessory 'Esszimmer'...
[KNX] Preparing Services: 1
[KNX] Preparing Service: 0 of type Lightbulb
[KNX] [Esszimmer]:Lightbulb on/off characteristic enabled
[KNX] knx registering BOOLEAN 1/2/47,1/2/24
[KNX] [Esszimmer]:[On]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 1/2/47
[KNX] [knxdevice:knxread] preparing knx request for 1/2/24
[KNX] [Esszimmer]:Lightbulb Brightness characteristic enabled
[KNX] knx registering PERCENT 1/12/49,1/2/85
[KNX] [Esszimmer]:[Brightness]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 1/12/49
[KNX] [knxdevice:knxread] preparing knx request for 1/2/85
<< knxd socket listener already running >>
[KNX] Initializing platform accessory 'KÃ¼che'...
[KNX] Preparing Services: 1
[KNX] Preparing Service: 0 of type Lightbulb
[KNX] [KÃ¼che]:Lightbulb on/off characteristic enabled
<< knxd socket listener already running >>
[KNX] Initializing platform accessory 'Garage'...
[KNX] Preparing Services: 1
[KNX] Preparing Service: 0 of type GarageDoorOpener
[KNX] [Garage]:GarageDoorOpener CurrentDoorState characteristic enabled
[KNX] [Garage]:[Current Door State]:knx registering INT ,5/4/12
[KNX] [Garage]:[Current Door State]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 5/4/12
[KNX] [Garage]:GarageDoorOpener TargetDoorState characteristic enabled
[KNX] [Garage]:[Target Door State]:knx registering INT 5/4/11
[KNX] [Garage]:[Target Door State]: Issuing read requests on the KNX bus...
[KNX] [knxdevice:knxread] preparing knx request for 5/4/11
<< knxd socket listener already running >>
Scan this code with your HomeKit App on your iOS device:

    ââââââââââââââ
    â 123-34-567 â
    ââââââââââââââ

  Accessory [Homebridge] Creating new AccessoryInfo for our HAP server +0ms
  Accessory [Homebridge] Creating new IdentifierCache +99ms
events.js:85
      throw er; // Unhandled 'error' event
            ^
Error: listen EADDRINUSE
    at exports._errnoException (util.js:746:11)
    at Server._listen2 (net.js:1156:14)
    at listen (net.js:1182:10)
    at Server.listen (net.js:1267:5)
    at EventedHTTPServer.listen (/usr/src/homebridge/node_modules/HAP-NodeJS/lib/util/eventedhttp.js:58:19)
    at HAPServer.listen (/usr/src/homebridge/node_modules/HAP-NodeJS/lib/HAPServer.js:132:20)
    at Bridge.Accessory.publish (/usr/src/homebridge/node_modules/HAP-NodeJS/lib/Accessory.js:347:16)
    at publish (/usr/src/homebridge/app.js:215:10)
    at startup (/usr/src/homebridge/app.js:65:7)
    at Object.<anonymous> (/usr/src/homebridge/app.js:223:1)
root@raspberrypi:/usr/src/homebridge#

Probiert hab ich: EIBD neu gestartet, Raspi neu gestartet, altes Config File eingespielt (orginal), npm update

kann mir einer einen Tipp geben ?

Gruß Martin

Zuletzt geändert von Brick; 06.10.2015, 06:57.

Einen Kommentar schreiben:

snowdd antwortet

05.10.2015, 20:28
Klar, mit nohup (wahrscheinlich von no-hang-up) :
mit debug:

Code:

DEBUG=* nohup npm start &

oder

Code:

DEBUG=* nohup node app.js &

Das & sorgt dafür dass der Prozess gleich im Hintergrund startet. Alle Ausgaben landen in der Datei nohup.out die kannst Du Dir dann online mit

Code:

tail -F nohup.out

ansehen und verfolgen.
Einen Kommentar schreiben:
Brick antwortet

05.10.2015, 19:35
Zitat von snowdd Beitrag anzeigen

Jaja, "jetzt nochmal im ganzen Satz", kennen wir doch noch aus der Schule....

BTW: cooler Footer, muss jedesmal lachen. Wenn Du den Thread so ab Seite 10 gelesen hast, weißt Du auch warum!

He he.. ja.. dachte Siri nimmts da nicht so genau..

hab ich noch nicht gelesen.. mach ich aber gern mal...

Noch ne kleine Frage.. wenn ich die SSH Sitzung von Putty schließe ist auch der Server weg.. kann ich das "Ding" irgendwie
weiter laufen lassen, wenn ich mich abgemeldet hab ? (sorry, bin kein Linuxprofi... )

Gruß Martin
Einen Kommentar schreiben:
snowdd antwortet

05.10.2015, 15:11
hatte es mit "Licht Keller 50%" probiert.. das reichte ihr nicht

Jaja, "jetzt nochmal im ganzen Satz", kennen wir doch noch aus der Schule....

BTW: cooler Footer, muss jedesmal lachen. Wenn Du den Thread so ab Seite 10 gelesen hast, weißt Du auch warum!
Einen Kommentar schreiben:
Brick antwortet

05.10.2015, 06:40
ok, danke ... probier ich heut Abend aus... hatte es mit "Licht Keller 50%" probiert.. das reichte ihr nicht..
Einen Kommentar schreiben:
vento66 antwortet

04.10.2015, 21:49
So etwa:

Stelle / mache das Licht in der Küche auf xx %
Einen Kommentar schreiben:
Brick antwortet

04.10.2015, 21:38
was muss ich den Siri sagen, das sie das Licht dimmt ?
hab es mit "Licht 50%" probiert.. bzw. mit "Licht 50"
wenn ich sag "Licht dimmen" geht Sie von 100% auf 75% und dann auf 50% usw..
aber direkt kann ich das nicht anspringen ??

Gruß Martin
Einen Kommentar schreiben:
Brick antwortet

04.10.2015, 18:33
ThorstenGehrig & @snowdd

lag am Kartenleser.. hab jetzt einen anderen verwendet.. jetzt gings.. jetzt gehts dann weiter mit testen..

Gruß Martin
Einen Kommentar schreiben:

Ankündigung

Apple - HomeKit - Schnittstelle zur Heimautomation

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben:

Einen Kommentar schreiben: